sysmo-bts
/
u-boot
9
0
Fork 0
Code Pull Requests Releases Activity
u-boot/drivers
History
Peter Tyser a38d216eeb pci: Fix ordering of devices when CONFIG_PCI_SCAN_SHOW 
Move the printing of PCI device information to before the PCI device is
configured.  This prevents the case where recursive scanning results in
the deepest devices being printed first.

This change also makes PCI lockups during enumeration easier to
diagnose since the device that is being configured is printed out prior
to configuration.  Previously, it was not possible to determine which
device caused the PCI lockup.

Original example:
  PCIE1: connected as Root Complex
        04:01.0 - 8086:1010 - Network controller
        04:01.1 - 8086:1010 - Network controller
        03:00.0 - 10b5:8112 - Bridge device
        02:01.0 - 10b5:8518 - Bridge device
        02:02.0 - 10b5:8518 - Bridge device
        08:00.0 - 1957:0040 - Processor
        07:00.0 - 10b5:8518 - Bridge device
        09:00.0 - 10b5:8112 - Bridge device
        07:01.0 - 10b5:8518 - Bridge device
        07:02.0 - 10b5:8518 - Bridge device
        06:00.0 - 10b5:8518 - Bridge device
        02:03.0 - 10b5:8518 - Bridge device
        01:00.0 - 10b5:8518 - Bridge device
  PCIE1: Bus 00 - 0b

Updated example:
  PCIE1: connected as Root Complex
        01:00.0 - 10b5:8518 - Bridge device
        02:01.0 - 10b5:8518 - Bridge device
        03:00.0 - 10b5:8112 - Bridge device
        04:01.0 - 8086:1010 - Network controller
        04:01.1 - 8086:1010 - Network controller
        02:02.0 - 10b5:8518 - Bridge device
        02:03.0 - 10b5:8518 - Bridge device
        06:00.0 - 10b5:8518 - Bridge device
        07:00.0 - 10b5:8518 - Bridge device
        08:00.0 - 1957:0040 - Processor
        07:01.0 - 10b5:8518 - Bridge device
        09:00.0 - 10b5:8112 - Bridge device
        07:02.0 - 10b5:8518 - Bridge device
  PCIE1: Bus 00 - 0b

Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
 		2010-11-14 23:46:47 +01:00
..
bios_emulator ati_radeon: Support PCI virtual not eq bus mapping. 2010-04-08 15:30:47 +02:00
block mvsata_ide: adjust port init sequence 2010-10-13 09:35:54 +02:00
dma powerpc/8xxx: Fix dma for 36bit addressing 2010-08-31 11:23:15 -05:00
fpga Coding Style cleanup 2010-10-27 22:48:30 +02:00
gpio Use common function to set GPIOs for MX3 and MX5 2010-09-29 11:24:30 +02:00
hwmon ds1621: Fix negative temperature readings 2010-10-06 23:01:22 +02:00
i2c Merge branch 'master' of git://git.denx.de/u-boot-samsung 2010-10-29 21:47:48 +02:00
input Remove HMI10 board support 2010-09-19 21:28:25 +02:00
misc Merge branch 'master' of git://git.denx.de/u-boot-arm 2010-10-13 20:59:47 +02:00
mmc Merge branch 'master' of git://git.denx.de/u-boot-samsung 2010-10-29 21:47:48 +02:00
mtd sf: ramtron: new spi fram driver 2010-11-10 04:26:18 -05:00
net net: e1000: Add initialized eth_device & e1000_hw structure 2010-11-14 23:24:37 +01:00
pci pci: Fix ordering of devices when CONFIG_PCI_SCAN_SHOW 2010-11-14 23:46:47 +01:00
pcmcia Remove HMI10 board support 2010-09-19 21:28:25 +02:00
power Prepare v2010.09-rc1 2010-09-10 00:16:19 +02:00
qe powerpc/fsl: Introduce common enum for PHY types 2010-10-20 02:27:18 -05:00
rtc Merge branch 'master' of git://git.denx.de/u-boot-samsung 2010-10-29 21:47:48 +02:00
serial Merge branch 'master' of git://git.denx.de/u-boot-samsung 2010-10-29 21:47:48 +02:00
spi Merge branch 'master' of git://git.denx.de/u-boot-imx 2010-10-11 10:19:04 +02:00
twserial drivers/twserial: Add protocol driver for "three wire serial" interface. 2009-03-30 09:38:36 +02:00
usb Coding Style cleanup 2010-10-27 22:48:30 +02:00
video MX51: Add video support 2010-10-22 00:05:05 +02:00
watchdog Convert at91 watchdog driver to new SoC access 2010-04-03 15:24:27 -05:00