u-boot/arch/arm/include/asm/arch-mx6
Fabio Estevam d145878d59 mx6sxsabresd: Add Ethernet support
mx6sxsabresd board has 2 FEC ports, each one connected to a AR8031.

Add support for one FEC port initially.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
2014-08-20 13:15:23 +02:00
..
clock.h i.MX6: add enable_spi_clk() 2014-07-23 12:25:42 +02:00
crm_regs.h mx6sxsabresd: Add Ethernet support 2014-08-20 13:15:23 +02:00
gpio.h Add GPL-2.0+ SPDX-License-Identifier to source files 2013-07-24 09:44:38 -04:00
hab.h imx: correct HAB status for new chip TO 2014-06-17 17:45:09 +02:00
imx-regs.h mx6: add support of multi-processor command 2014-08-20 11:52:54 +02:00
iomux.h mx6sxsabresd: Add Ethernet support 2014-08-20 13:15:23 +02:00
mx6-ddr.h mx6: Add support for the mx6solox variant 2014-07-10 15:29:16 +02:00
mx6-pins.h mx6sx: Add pin definitions 2014-07-10 15:29:16 +02:00
mx6dl-ddr.h Add GPL-2.0+ SPDX-License-Identifier to source files 2013-07-24 09:44:38 -04:00
mx6dl_pins.h i.MX6DL/S: add drive-strength back to pads DISP0_DAT2/DAT10 2014-07-10 15:23:56 +02:00
mx6q-ddr.h Add GPL-2.0+ SPDX-License-Identifier to source files 2013-07-24 09:44:38 -04:00
mx6q_pins.h imx6 SION bit has to be on for the pins that are used as ENET_REF_CLK 2014-02-19 10:57:25 +01:00
mx6sl_pins.h mx6slevk: Add SPI NOR flash support 2014-04-28 14:00:16 +02:00
mx6sx-ddr.h mx6: Add support for the mx6solox variant 2014-07-10 15:29:16 +02:00
mx6sx_pins.h mx6sx: Add pin definitions 2014-07-10 15:29:16 +02:00
mxc_hdmi.h Merge git://git.denx.de/u-boot-arm 2013-07-31 11:30:38 +02:00
sys_proto.h mx6: add support of multi-processor command 2014-08-20 11:52:54 +02:00