This patch adds the DDR3 setup and training code taken from the Marvell U-Boot repository. This code used to be included as a binary (bin_hdr) into the Armada A38x boot image. Not linked with the main U-Boot. With this code addition and the serdes/PHY setup code, the Armada A38x support in mainline U-Boot is finally self-contained. So the complete image for booting can be built from mainline U-Boot. Without any additional external inclusion. Note: This code has undergone many hours (days!) of coding-style cleanup and refactoring. It still is not checkpatch clean though, I'm afraid. As the factoring of the code has so many levels of indentation that many lines are longer than 80 chars. Signed-off-by: Stefan Roese <sr@denx.de>
357 lines
8.5 KiB
C
357 lines
8.5 KiB
C
/*
|
|
* Copyright (C) Marvell International Ltd. and its affiliates
|
|
*
|
|
* SPDX-License-Identifier: GPL-2.0
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <i2c.h>
|
|
#include <spl.h>
|
|
#include <asm/io.h>
|
|
#include <asm/arch/cpu.h>
|
|
#include <asm/arch/soc.h>
|
|
|
|
#include "ddr3_init.h"
|
|
#include "xor_regs.h"
|
|
|
|
/* defines */
|
|
#ifdef MV_DEBUG
|
|
#define DB(x) x
|
|
#else
|
|
#define DB(x)
|
|
#endif
|
|
|
|
static u32 ui_xor_regs_ctrl_backup;
|
|
static u32 ui_xor_regs_base_backup[MAX_CS];
|
|
static u32 ui_xor_regs_mask_backup[MAX_CS];
|
|
|
|
void mv_sys_xor_init(u32 num_of_cs, u32 cs_ena, u32 cs_size, u32 base_delta)
|
|
{
|
|
u32 reg, ui, base, cs_count;
|
|
|
|
ui_xor_regs_ctrl_backup = reg_read(XOR_WINDOW_CTRL_REG(0, 0));
|
|
for (ui = 0; ui < MAX_CS; ui++)
|
|
ui_xor_regs_base_backup[ui] =
|
|
reg_read(XOR_BASE_ADDR_REG(0, ui));
|
|
for (ui = 0; ui < MAX_CS; ui++)
|
|
ui_xor_regs_mask_backup[ui] =
|
|
reg_read(XOR_SIZE_MASK_REG(0, ui));
|
|
|
|
reg = 0;
|
|
for (ui = 0; ui < (num_of_cs); ui++) {
|
|
/* Enable Window x for each CS */
|
|
reg |= (0x1 << (ui));
|
|
/* Enable Window x for each CS */
|
|
reg |= (0x3 << ((ui * 2) + 16));
|
|
}
|
|
|
|
reg_write(XOR_WINDOW_CTRL_REG(0, 0), reg);
|
|
|
|
cs_count = 0;
|
|
for (ui = 0; ui < num_of_cs; ui++) {
|
|
if (cs_ena & (1 << ui)) {
|
|
/*
|
|
* window x - Base - 0x00000000,
|
|
* Attribute 0x0e - DRAM
|
|
*/
|
|
base = cs_size * ui + base_delta;
|
|
switch (ui) {
|
|
case 0:
|
|
base |= 0xe00;
|
|
break;
|
|
case 1:
|
|
base |= 0xd00;
|
|
break;
|
|
case 2:
|
|
base |= 0xb00;
|
|
break;
|
|
case 3:
|
|
base |= 0x700;
|
|
break;
|
|
}
|
|
|
|
reg_write(XOR_BASE_ADDR_REG(0, cs_count), base);
|
|
|
|
/* window x - Size */
|
|
reg_write(XOR_SIZE_MASK_REG(0, cs_count), 0x7fff0000);
|
|
cs_count++;
|
|
}
|
|
}
|
|
|
|
mv_xor_hal_init(1);
|
|
|
|
return;
|
|
}
|
|
|
|
void mv_sys_xor_finish(void)
|
|
{
|
|
u32 ui;
|
|
|
|
reg_write(XOR_WINDOW_CTRL_REG(0, 0), ui_xor_regs_ctrl_backup);
|
|
for (ui = 0; ui < MAX_CS; ui++)
|
|
reg_write(XOR_BASE_ADDR_REG(0, ui),
|
|
ui_xor_regs_base_backup[ui]);
|
|
for (ui = 0; ui < MAX_CS; ui++)
|
|
reg_write(XOR_SIZE_MASK_REG(0, ui),
|
|
ui_xor_regs_mask_backup[ui]);
|
|
|
|
reg_write(XOR_ADDR_OVRD_REG(0, 0), 0);
|
|
}
|
|
|
|
/*
|
|
* mv_xor_hal_init - Initialize XOR engine
|
|
*
|
|
* DESCRIPTION:
|
|
* This function initialize XOR unit.
|
|
* INPUT:
|
|
* None.
|
|
*
|
|
* OUTPUT:
|
|
* None.
|
|
*
|
|
* RETURN:
|
|
* MV_BAD_PARAM if parameters to function invalid, MV_OK otherwise.
|
|
*/
|
|
void mv_xor_hal_init(u32 xor_chan_num)
|
|
{
|
|
u32 i;
|
|
|
|
/* Abort any XOR activity & set default configuration */
|
|
for (i = 0; i < xor_chan_num; i++) {
|
|
mv_xor_command_set(i, MV_STOP);
|
|
mv_xor_ctrl_set(i, (1 << XEXCR_REG_ACC_PROTECT_OFFS) |
|
|
(4 << XEXCR_DST_BURST_LIMIT_OFFS) |
|
|
(4 << XEXCR_SRC_BURST_LIMIT_OFFS));
|
|
}
|
|
}
|
|
|
|
/*
|
|
* mv_xor_ctrl_set - Set XOR channel control registers
|
|
*
|
|
* DESCRIPTION:
|
|
*
|
|
* INPUT:
|
|
*
|
|
* OUTPUT:
|
|
* None.
|
|
*
|
|
* RETURN:
|
|
* MV_BAD_PARAM if parameters to function invalid, MV_OK otherwise.
|
|
* NOTE:
|
|
* This function does not modify the Operation_mode field of control register.
|
|
*/
|
|
int mv_xor_ctrl_set(u32 chan, u32 xor_ctrl)
|
|
{
|
|
u32 old_value;
|
|
|
|
/* update the XOR Engine [0..1] Configuration Registers (XEx_c_r) */
|
|
old_value = reg_read(XOR_CONFIG_REG(XOR_UNIT(chan), XOR_CHAN(chan))) &
|
|
XEXCR_OPERATION_MODE_MASK;
|
|
xor_ctrl &= ~XEXCR_OPERATION_MODE_MASK;
|
|
xor_ctrl |= old_value;
|
|
reg_write(XOR_CONFIG_REG(XOR_UNIT(chan), XOR_CHAN(chan)), xor_ctrl);
|
|
|
|
return MV_OK;
|
|
}
|
|
|
|
int mv_xor_mem_init(u32 chan, u32 start_ptr, u32 block_size,
|
|
u32 init_val_high, u32 init_val_low)
|
|
{
|
|
u32 temp;
|
|
|
|
/* Parameter checking */
|
|
if (chan >= MV_XOR_MAX_CHAN)
|
|
return MV_BAD_PARAM;
|
|
|
|
if (MV_ACTIVE == mv_xor_state_get(chan))
|
|
return MV_BUSY;
|
|
|
|
if ((block_size < XEXBSR_BLOCK_SIZE_MIN_VALUE) ||
|
|
(block_size > XEXBSR_BLOCK_SIZE_MAX_VALUE))
|
|
return MV_BAD_PARAM;
|
|
|
|
/* set the operation mode to Memory Init */
|
|
temp = reg_read(XOR_CONFIG_REG(XOR_UNIT(chan), XOR_CHAN(chan)));
|
|
temp &= ~XEXCR_OPERATION_MODE_MASK;
|
|
temp |= XEXCR_OPERATION_MODE_MEM_INIT;
|
|
reg_write(XOR_CONFIG_REG(XOR_UNIT(chan), XOR_CHAN(chan)), temp);
|
|
|
|
/*
|
|
* update the start_ptr field in XOR Engine [0..1] Destination Pointer
|
|
* Register
|
|
*/
|
|
reg_write(XOR_DST_PTR_REG(XOR_UNIT(chan), XOR_CHAN(chan)), start_ptr);
|
|
|
|
/*
|
|
* update the Block_size field in the XOR Engine[0..1] Block Size
|
|
* Registers
|
|
*/
|
|
reg_write(XOR_BLOCK_SIZE_REG(XOR_UNIT(chan), XOR_CHAN(chan)),
|
|
block_size);
|
|
|
|
/*
|
|
* update the field Init_val_l in the XOR Engine Initial Value Register
|
|
* Low (XEIVRL)
|
|
*/
|
|
reg_write(XOR_INIT_VAL_LOW_REG(XOR_UNIT(chan)), init_val_low);
|
|
|
|
/*
|
|
* update the field Init_val_h in the XOR Engine Initial Value Register
|
|
* High (XEIVRH)
|
|
*/
|
|
reg_write(XOR_INIT_VAL_HIGH_REG(XOR_UNIT(chan)), init_val_high);
|
|
|
|
/* start transfer */
|
|
reg_bit_set(XOR_ACTIVATION_REG(XOR_UNIT(chan), XOR_CHAN(chan)),
|
|
XEXACTR_XESTART_MASK);
|
|
|
|
return MV_OK;
|
|
}
|
|
|
|
/*
|
|
* mv_xor_state_get - Get XOR channel state.
|
|
*
|
|
* DESCRIPTION:
|
|
* XOR channel activity state can be active, idle, paused.
|
|
* This function retrunes the channel activity state.
|
|
*
|
|
* INPUT:
|
|
* chan - the channel number
|
|
*
|
|
* OUTPUT:
|
|
* None.
|
|
*
|
|
* RETURN:
|
|
* XOR_CHANNEL_IDLE - If the engine is idle.
|
|
* XOR_CHANNEL_ACTIVE - If the engine is busy.
|
|
* XOR_CHANNEL_PAUSED - If the engine is paused.
|
|
* MV_UNDEFINED_STATE - If the engine state is undefind or there is no
|
|
* such engine
|
|
*/
|
|
enum mv_state mv_xor_state_get(u32 chan)
|
|
{
|
|
u32 state;
|
|
|
|
/* Parameter checking */
|
|
if (chan >= MV_XOR_MAX_CHAN) {
|
|
DB(printf("%s: ERR. Invalid chan num %d\n", __func__, chan));
|
|
return MV_UNDEFINED_STATE;
|
|
}
|
|
|
|
/* read the current state */
|
|
state = reg_read(XOR_ACTIVATION_REG(XOR_UNIT(chan), XOR_CHAN(chan)));
|
|
state &= XEXACTR_XESTATUS_MASK;
|
|
|
|
/* return the state */
|
|
switch (state) {
|
|
case XEXACTR_XESTATUS_IDLE:
|
|
return MV_IDLE;
|
|
case XEXACTR_XESTATUS_ACTIVE:
|
|
return MV_ACTIVE;
|
|
case XEXACTR_XESTATUS_PAUSED:
|
|
return MV_PAUSED;
|
|
}
|
|
|
|
return MV_UNDEFINED_STATE;
|
|
}
|
|
|
|
/*
|
|
* mv_xor_command_set - Set command of XOR channel
|
|
*
|
|
* DESCRIPTION:
|
|
* XOR channel can be started, idle, paused and restarted.
|
|
* Paused can be set only if channel is active.
|
|
* Start can be set only if channel is idle or paused.
|
|
* Restart can be set only if channel is paused.
|
|
* Stop can be set only if channel is active.
|
|
*
|
|
* INPUT:
|
|
* chan - The channel number
|
|
* command - The command type (start, stop, restart, pause)
|
|
*
|
|
* OUTPUT:
|
|
* None.
|
|
*
|
|
* RETURN:
|
|
* MV_OK on success , MV_BAD_PARAM on erroneous parameter, MV_ERROR on
|
|
* undefind XOR engine mode
|
|
*/
|
|
int mv_xor_command_set(u32 chan, enum mv_command command)
|
|
{
|
|
enum mv_state state;
|
|
|
|
/* Parameter checking */
|
|
if (chan >= MV_XOR_MAX_CHAN) {
|
|
DB(printf("%s: ERR. Invalid chan num %d\n", __func__, chan));
|
|
return MV_BAD_PARAM;
|
|
}
|
|
|
|
/* get the current state */
|
|
state = mv_xor_state_get(chan);
|
|
|
|
if ((command == MV_START) && (state == MV_IDLE)) {
|
|
/* command is start and current state is idle */
|
|
reg_bit_set(XOR_ACTIVATION_REG
|
|
(XOR_UNIT(chan), XOR_CHAN(chan)),
|
|
XEXACTR_XESTART_MASK);
|
|
return MV_OK;
|
|
} else if ((command == MV_STOP) && (state == MV_ACTIVE)) {
|
|
/* command is stop and current state is active */
|
|
reg_bit_set(XOR_ACTIVATION_REG
|
|
(XOR_UNIT(chan), XOR_CHAN(chan)),
|
|
XEXACTR_XESTOP_MASK);
|
|
return MV_OK;
|
|
} else if (((enum mv_state)command == MV_PAUSED) &&
|
|
(state == MV_ACTIVE)) {
|
|
/* command is paused and current state is active */
|
|
reg_bit_set(XOR_ACTIVATION_REG
|
|
(XOR_UNIT(chan), XOR_CHAN(chan)),
|
|
XEXACTR_XEPAUSE_MASK);
|
|
return MV_OK;
|
|
} else if ((command == MV_RESTART) && (state == MV_PAUSED)) {
|
|
/* command is restart and current state is paused */
|
|
reg_bit_set(XOR_ACTIVATION_REG
|
|
(XOR_UNIT(chan), XOR_CHAN(chan)),
|
|
XEXACTR_XERESTART_MASK);
|
|
return MV_OK;
|
|
} else if ((command == MV_STOP) && (state == MV_IDLE)) {
|
|
/* command is stop and current state is active */
|
|
return MV_OK;
|
|
}
|
|
|
|
/* illegal command */
|
|
DB(printf("%s: ERR. Illegal command\n", __func__));
|
|
|
|
return MV_BAD_PARAM;
|
|
}
|
|
|
|
void ddr3_new_tip_ecc_scrub(void)
|
|
{
|
|
u32 cs_c, max_cs;
|
|
u32 cs_ena = 0;
|
|
|
|
printf("DDR3 Training Sequence - Start scrubbing\n");
|
|
|
|
max_cs = hws_ddr3_tip_max_cs_get();
|
|
for (cs_c = 0; cs_c < max_cs; cs_c++)
|
|
cs_ena |= 1 << cs_c;
|
|
|
|
mv_sys_xor_init(max_cs, cs_ena, 0x80000000, 0);
|
|
|
|
mv_xor_mem_init(0, 0x00000000, 0x80000000, 0xdeadbeef, 0xdeadbeef);
|
|
/* wait for previous transfer completion */
|
|
while (mv_xor_state_get(0) != MV_IDLE)
|
|
;
|
|
|
|
mv_xor_mem_init(0, 0x80000000, 0x40000000, 0xdeadbeef, 0xdeadbeef);
|
|
|
|
/* wait for previous transfer completion */
|
|
while (mv_xor_state_get(0) != MV_IDLE)
|
|
;
|
|
|
|
/* Return XOR State */
|
|
mv_sys_xor_finish();
|
|
|
|
printf("DDR3 Training Sequence - End scrubbing\n");
|
|
}
|