u-boot/drivers/mtd/nand/s3c64xx.c
Minkyu Kang 47e801bec3 s3c64xx: move s3c64xx header files to asm-arm/arch-s3c64xx
This patch moves the s3c64xx header files from include/
to include/asm-arm/arch-s3c64xx

Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
2009-11-27 16:26:13 -06:00

320 lines
7.9 KiB
C

/*
* (C) Copyright 2006 DENX Software Engineering
*
* Implementation for U-Boot 1.1.6 by Samsung
*
* (C) Copyright 2008
* Guennadi Liakhovetki, DENX Software Engineering, <lg@denx.de>
*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
#include <common.h>
#include <nand.h>
#include <asm/arch/s3c6400.h>
#include <asm/io.h>
#include <asm/errno.h>
#define MAX_CHIPS 2
static int nand_cs[MAX_CHIPS] = {0, 1};
#ifdef CONFIG_NAND_SPL
#define printf(arg...) do {} while (0)
#endif
/* Nand flash definition values by jsgood */
#ifdef S3C_NAND_DEBUG
/*
* Function to print out oob buffer for debugging
* Written by jsgood
*/
static void print_oob(const char *header, struct mtd_info *mtd)
{
int i;
struct nand_chip *chip = mtd->priv;
printf("%s:\t", header);
for (i = 0; i < 64; i++)
printf("%02x ", chip->oob_poi[i]);
printf("\n");
}
#endif /* S3C_NAND_DEBUG */
#ifdef CONFIG_NAND_SPL
static u_char nand_read_byte(struct mtd_info *mtd)
{
struct nand_chip *this = mtd->priv;
return readb(this->IO_ADDR_R);
}
static void nand_write_buf(struct mtd_info *mtd, const uint8_t *buf, int len)
{
int i;
struct nand_chip *this = mtd->priv;
for (i = 0; i < len; i++)
writeb(buf[i], this->IO_ADDR_W);
}
static void nand_read_buf(struct mtd_info *mtd, u_char *buf, int len)
{
int i;
struct nand_chip *this = mtd->priv;
for (i = 0; i < len; i++)
buf[i] = readb(this->IO_ADDR_R);
}
#endif
static void s3c_nand_select_chip(struct mtd_info *mtd, int chip)
{
int ctrl = readl(NFCONT);
switch (chip) {
case -1:
ctrl |= 6;
break;
case 0:
ctrl &= ~2;
break;
case 1:
ctrl &= ~4;
break;
default:
return;
}
writel(ctrl, NFCONT);
}
/*
* Hardware specific access to control-lines function
* Written by jsgood
*/
static void s3c_nand_hwcontrol(struct mtd_info *mtd, int cmd, unsigned int ctrl)
{
struct nand_chip *this = mtd->priv;
if (ctrl & NAND_CTRL_CHANGE) {
if (ctrl & NAND_CLE)
this->IO_ADDR_W = (void __iomem *)NFCMMD;
else if (ctrl & NAND_ALE)
this->IO_ADDR_W = (void __iomem *)NFADDR;
else
this->IO_ADDR_W = (void __iomem *)NFDATA;
if (ctrl & NAND_NCE)
s3c_nand_select_chip(mtd, *(int *)this->priv);
else
s3c_nand_select_chip(mtd, -1);
}
if (cmd != NAND_CMD_NONE)
writeb(cmd, this->IO_ADDR_W);
}
/*
* Function for checking device ready pin
* Written by jsgood
*/
static int s3c_nand_device_ready(struct mtd_info *mtdinfo)
{
return !!(readl(NFSTAT) & NFSTAT_RnB);
}
#ifdef CONFIG_SYS_S3C_NAND_HWECC
/*
* This function is called before encoding ecc codes to ready ecc engine.
* Written by jsgood
*/
static void s3c_nand_enable_hwecc(struct mtd_info *mtd, int mode)
{
u_long nfcont, nfconf;
/*
* The original driver used 4-bit ECC for "new" MLC chips, i.e., for
* those with non-zero ID[3][3:2], which anyway only holds for ST
* (Numonyx) chips
*/
nfconf = readl(NFCONF) & ~NFCONF_ECC_4BIT;
writel(nfconf, NFCONF);
/* Initialize & unlock */
nfcont = readl(NFCONT);
nfcont |= NFCONT_INITECC;
nfcont &= ~NFCONT_MECCLOCK;
if (mode == NAND_ECC_WRITE)
nfcont |= NFCONT_ECC_ENC;
else if (mode == NAND_ECC_READ)
nfcont &= ~NFCONT_ECC_ENC;
writel(nfcont, NFCONT);
}
/*
* This function is called immediately after encoding ecc codes.
* This function returns encoded ecc codes.
* Written by jsgood
*/
static int s3c_nand_calculate_ecc(struct mtd_info *mtd, const u_char *dat,
u_char *ecc_code)
{
u_long nfcont, nfmecc0;
/* Lock */
nfcont = readl(NFCONT);
nfcont |= NFCONT_MECCLOCK;
writel(nfcont, NFCONT);
nfmecc0 = readl(NFMECC0);
ecc_code[0] = nfmecc0 & 0xff;
ecc_code[1] = (nfmecc0 >> 8) & 0xff;
ecc_code[2] = (nfmecc0 >> 16) & 0xff;
ecc_code[3] = (nfmecc0 >> 24) & 0xff;
return 0;
}
/*
* This function determines whether read data is good or not.
* If SLC, must write ecc codes to controller before reading status bit.
* If MLC, status bit is already set, so only reading is needed.
* If status bit is good, return 0.
* If correctable errors occured, do that.
* If uncorrectable errors occured, return -1.
* Written by jsgood
*/
static int s3c_nand_correct_data(struct mtd_info *mtd, u_char *dat,
u_char *read_ecc, u_char *calc_ecc)
{
int ret = -1;
u_long nfestat0, nfmeccdata0, nfmeccdata1, err_byte_addr;
u_char err_type, repaired;
/* SLC: Write ecc to compare */
nfmeccdata0 = (calc_ecc[1] << 16) | calc_ecc[0];
nfmeccdata1 = (calc_ecc[3] << 16) | calc_ecc[2];
writel(nfmeccdata0, NFMECCDATA0);
writel(nfmeccdata1, NFMECCDATA1);
/* Read ecc status */
nfestat0 = readl(NFESTAT0);
err_type = nfestat0 & 0x3;
switch (err_type) {
case 0: /* No error */
ret = 0;
break;
case 1:
/*
* 1 bit error (Correctable)
* (nfestat0 >> 7) & 0x7ff :error byte number
* (nfestat0 >> 4) & 0x7 :error bit number
*/
err_byte_addr = (nfestat0 >> 7) & 0x7ff;
repaired = dat[err_byte_addr] ^ (1 << ((nfestat0 >> 4) & 0x7));
printf("S3C NAND: 1 bit error detected at byte %ld. "
"Correcting from 0x%02x to 0x%02x...OK\n",
err_byte_addr, dat[err_byte_addr], repaired);
dat[err_byte_addr] = repaired;
ret = 1;
break;
case 2: /* Multiple error */
case 3: /* ECC area error */
printf("S3C NAND: ECC uncorrectable error detected. "
"Not correctable.\n");
ret = -1;
break;
}
return ret;
}
#endif /* CONFIG_SYS_S3C_NAND_HWECC */
/*
* Board-specific NAND initialization. The following members of the
* argument are board-specific (per include/linux/mtd/nand.h):
* - IO_ADDR_R?: address to read the 8 I/O lines of the flash device
* - IO_ADDR_W?: address to write the 8 I/O lines of the flash device
* - hwcontrol: hardwarespecific function for accesing control-lines
* - dev_ready: hardwarespecific function for accesing device ready/busy line
* - enable_hwecc?: function to enable (reset) hardware ecc generator. Must
* only be provided if a hardware ECC is available
* - eccmode: mode of ecc, see defines
* - chip_delay: chip dependent delay for transfering data from array to
* read regs (tR)
* - options: various chip options. They can partly be set to inform
* nand_scan about special functionality. See the defines for further
* explanation
* Members with a "?" were not set in the merged testing-NAND branch,
* so they are not set here either.
*/
int board_nand_init(struct nand_chip *nand)
{
static int chip_n;
if (chip_n >= MAX_CHIPS)
return -ENODEV;
NFCONT_REG = (NFCONT_REG & ~NFCONT_WP) | NFCONT_ENABLE | 0x6;
nand->IO_ADDR_R = (void __iomem *)NFDATA;
nand->IO_ADDR_W = (void __iomem *)NFDATA;
nand->cmd_ctrl = s3c_nand_hwcontrol;
nand->dev_ready = s3c_nand_device_ready;
nand->select_chip = s3c_nand_select_chip;
nand->options = 0;
#ifdef CONFIG_NAND_SPL
nand->read_byte = nand_read_byte;
nand->write_buf = nand_write_buf;
nand->read_buf = nand_read_buf;
#endif
#ifdef CONFIG_SYS_S3C_NAND_HWECC
nand->ecc.hwctl = s3c_nand_enable_hwecc;
nand->ecc.calculate = s3c_nand_calculate_ecc;
nand->ecc.correct = s3c_nand_correct_data;
/*
* If you get more than 1 NAND-chip with different page-sizes on the
* board one day, it will get more complicated...
*/
nand->ecc.mode = NAND_ECC_HW;
nand->ecc.size = CONFIG_SYS_NAND_ECCSIZE;
nand->ecc.bytes = CONFIG_SYS_NAND_ECCBYTES;
#else
nand->ecc.mode = NAND_ECC_SOFT;
#endif /* ! CONFIG_SYS_S3C_NAND_HWECC */
nand->priv = nand_cs + chip_n++;
return 0;
}