u-boot/arch/arc/lib/ints_low.S
Alexey Brodkin 8ee28251d9 arc: move low-level interrupt and exception handlers in a separate file
This separation makes maintenance of code easier because those low-level
interrupt- or exception handling routines are pretty static and usually
require not much care while start-up code is a subject of modifications
and enhancements.

Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
2015-04-03 09:47:49 +03:00

152 lines
2.5 KiB
ArmAsm

/*
* Copyright (C) 2013-2015 Synopsys, Inc. All rights reserved.
*
* SPDX-License-Identifier: GPL-2.0+
*/
#include <linux/linkage.h>
/*
* Note on the LD/ST addressing modes with address register write-back
*
* LD.a same as LD.aw
*
* LD.a reg1, [reg2, x] => Pre Incr
* Eff Addr for load = [reg2 + x]
*
* LD.ab reg1, [reg2, x] => Post Incr
* Eff Addr for load = [reg2]
*/
.macro PUSH reg
st.a \reg, [%sp, -4]
.endm
.macro PUSHAX aux
lr %r9, [\aux]
PUSH %r9
.endm
.macro SAVE_R1_TO_R24
PUSH %r1
PUSH %r2
PUSH %r3
PUSH %r4
PUSH %r5
PUSH %r6
PUSH %r7
PUSH %r8
PUSH %r9
PUSH %r10
PUSH %r11
PUSH %r12
PUSH %r13
PUSH %r14
PUSH %r15
PUSH %r16
PUSH %r17
PUSH %r18
PUSH %r19
PUSH %r20
PUSH %r21
PUSH %r22
PUSH %r23
PUSH %r24
.endm
.macro SAVE_ALL_SYS
/* saving %r0 to reg->r0 in advance since we read %ecr into it */
st %r0, [%sp, -8]
lr %r0, [%ecr] /* all stack addressing is manual so far */
st %r0, [%sp]
st %sp, [%sp, -4]
/* now move %sp to reg->r0 position so we can do "push" automatically */
sub %sp, %sp, 8
SAVE_R1_TO_R24
PUSH %r25
PUSH %gp
PUSH %fp
PUSH %blink
PUSHAX %eret
PUSHAX %erstatus
PUSH %lp_count
PUSHAX %lp_end
PUSHAX %lp_start
PUSHAX %erbta
.endm
.macro SAVE_EXCEPTION_SOURCE
#ifdef CONFIG_MMU
/* If MMU exists exception faulting address is loaded in EFA reg */
lr %r0, [%efa]
#else
/* Otherwise in ERET (exception return) reg */
lr %r0, [%eret]
#endif
.endm
ENTRY(memory_error)
SAVE_ALL_SYS
SAVE_EXCEPTION_SOURCE
mov %r1, %sp
j do_memory_error
ENDPROC(memory_error)
ENTRY(instruction_error)
SAVE_ALL_SYS
SAVE_EXCEPTION_SOURCE
mov %r1, %sp
j do_instruction_error
ENDPROC(instruction_error)
ENTRY(interrupt_handler)
/* Todo - save and restore CPU context when interrupts will be in use */
bl do_interrupt_handler
rtie
ENDPROC(interrupt_handler)
ENTRY(EV_MachineCheck)
SAVE_ALL_SYS
SAVE_EXCEPTION_SOURCE
mov %r1, %sp
j do_machine_check_fault
ENDPROC(EV_MachineCheck)
ENTRY(EV_TLBMissI)
SAVE_ALL_SYS
mov %r0, %sp
j do_itlb_miss
ENDPROC(EV_TLBMissI)
ENTRY(EV_TLBMissD)
SAVE_ALL_SYS
mov %r0, %sp
j do_dtlb_miss
ENDPROC(EV_TLBMissD)
ENTRY(EV_TLBProtV)
SAVE_ALL_SYS
SAVE_EXCEPTION_SOURCE
mov %r1, %sp
j do_tlb_prot_violation
ENDPROC(EV_TLBProtV)
ENTRY(EV_PrivilegeV)
SAVE_ALL_SYS
mov %r0, %sp
j do_privilege_violation
ENDPROC(EV_PrivilegeV)
ENTRY(EV_Trap)
SAVE_ALL_SYS
mov %r0, %sp
j do_trap
ENDPROC(EV_Trap)
ENTRY(EV_Extension)
SAVE_ALL_SYS
mov %r0, %sp
j do_extension
ENDPROC(EV_Extension)