u-boot/arch
Shengzhou Liu aba8004818 powerpc/t1024qds: Add T1024 QDS board support
T1024QDS is a high-performance computing evaluation, development and
test platform for T1024 QorIQ Power Architecture processor.

T1024QDS board Overview
-----------------------
- T1024 SoC integrating two 64-bit e5500 cores up to 1.4GHz
- CoreNet fabric supporting coherent and noncoherent transactions with
  prioritization and bandwidth allocation
- 32-/64-bit DDR3L/DDR4 SDRAM memory controller with ECC and interleaving support
- Accelerator: DPAA components consist of FMan, BMan, QMan, DCE and SEC
- Ethernet interfaces:
  - Two 10M/100M/1G RGMII ports on-board
  - Three 1G/2.5Gbps SGMII ports
  - Four 1Gbps QSGMII ports
  - one 10Gbps XFI or 10Base-KR interface
- SerDes: 4 lanes up to 10.3125GHz Supporting SGMII/QSGMII, XFI, PCIe, SATA and Aurora
- PCIe: Three PCI Express controllers with five PCIe slots.
- IFC: 128MB NOR Flash, 2GB NAND Flash, PromJet debug port and Qixis FPGA
- Video: DIU supports video up to 1280x1024x32 bpp.
  - Chrontel CH7201 for HDMI connection.
  - TI DS90C387R for direct LCD connection.
  - Raw (not encoded) video connector for testing or other encoders.
- QUICC Engine block
  - 32-bit RISC controller for flexible support of the communications peripherals
  - Serial DMA channel for receive and transmit on all serial channels
  - Two universal communication controllers, supporting TDM, HDLC, and UART
- Deep Sleep power implementaion (wakeup from GPIO/Timer/Ethernet/USB)
- eSPI: Three SPI flash devices.
- SATA: one SATA 2.O.
- USB: Two USB2.0 ports with internal PHY (one Type-A + one micro Type mini-AB)
- eSDHC: Support SD, SDHC, SDXC and MMC/eMMC.
- I2C: Four I2C controllers.
- UART: Two UART on board.

Signed-off-by: Shengzhou Liu <Shengzhou.Liu@freescale.com>
[York Sun: Fix ft_board_setup() type, fix MAINTAINERS for SECURE_BOOT
	   Fix Kconfig by adding SUPPORT_SPL]
Reviewed-by: York Sun <yorksun@freescale.com>
2014-12-05 08:06:15 -08:00
..
arc kconfig: remove redundant "string" type in arch and board Kconfigs 2014-09-13 16:43:55 -04:00
arm mtd: nand: s3c: Unify the register definition and naming 2014-11-26 23:21:43 -06:00
avr32 kbuild: use SoC-specific CONFIG to descend into SoC directory 2014-11-23 06:49:02 -05:00
blackfin linux/kernel.h: sync min, max, min3, max3 macros with Linux 2014-11-23 06:48:30 -05:00
m68k kconfig: remove redundant "string" type in arch and board Kconfigs 2014-09-13 16:43:55 -04:00
microblaze kconfig: add CONFIG_SUPPORT_SPL 2014-10-27 17:54:10 -04:00
mips MIPS: bootm: remove unused or redundant header files 2014-11-27 16:20:37 +01:00
nds32 kbuild: use SoC-specific CONFIG to descend into SoC directory 2014-11-23 06:49:02 -05:00
nios2 fdt: Allow ft_board_setup() to report failure 2014-11-21 04:43:15 +01:00
openrisc kconfig: remove redundant "string" type in arch and board Kconfigs 2014-09-13 16:43:55 -04:00
powerpc powerpc/t1024qds: Add T1024 QDS board support 2014-12-05 08:06:15 -08:00
sandbox sandbox: Prepare API change for files greater than 2GB 2014-11-23 06:49:04 -05:00
sh Merge branch 'master' of git://git.denx.de/u-boot-sh 2014-11-17 08:43:40 -05:00
sparc sparc: merge CONFIG_SYS_CPU and CONFIG_SYS_VENDOR defines 2014-11-04 15:01:38 -05:00
x86 Merge git://git.denx.de/u-boot-x86 2014-11-24 12:00:00 -05:00
.gitignore .gitignore: drop include/asm/proc from ignore pattern 2014-06-19 11:18:54 -04:00
Kconfig kconfig: move CONFIG_USE_PRIVATE_LIBGCC to Kconfig 2014-10-23 13:19:09 -04:00