u-boot/board/aristainetos/clocks.cfg
Heiko Schocher e379c03902 arm, imx6: add aristainetos board
CPU:   Freescale i.MX6DL rev1.1 at 792 MHz
Board: aristaitenos
I2C:   ready
DRAM:  1 GiB
NAND:  512 MiB
MMC:   FSL_SDHC: 0, FSL_SDHC: 1
SF: Detected N25Q128 with page size 256 Bytes, erase size 64 KiB, total 16 MiB
Display: lb07wv8 (800x480)

- UART5 is console
- MMC 0 and 1
- USB 0 and 1
- boot from mmc0 and spi nor flash
- Splash screen support

Signed-off-by: Heiko Schocher <hs@denx.de>
Cc: Stefano Babic <sbabic@denx.de>
2014-07-23 12:31:34 +02:00

25 lines
667 B
INI

/*
* Copyright (C) 2013 Boundary Devices
*
* SPDX-License-Identifier: GPL-2.0+
*
* Device Configuration Data (DCD)
*
* Each entry must have the format:
* Addr-type Address Value
*
* where:
* Addr-type register length (1,2 or 4 bytes)
* Address absolute address of the register
* value value to be stored in the register
*/
/* set the default clock gate to save power */
DATA 4, CCM_CCGR0, 0x00c03f3f
DATA 4, CCM_CCGR1, 0x0030fcff
DATA 4, CCM_CCGR2, 0x0fffcfc0
DATA 4, CCM_CCGR3, 0x3ff0300f
DATA 4, CCM_CCGR4, 0xfffff30c /* enable NAND/GPMI/BCH clocks */
DATA 4, CCM_CCGR5, 0x0f0000c3
DATA 4, CCM_CCGR6, 0x000003ff