u-boot/drivers/net/macb.c
Kim Phillips eef1cf2d5c include/linux/byteorder: import latest endian definitions from linux
u-boot's byteorder headers did not contain endianness attributions
for use with sparse, causing a lot of false positives.  Import the
kernel's latest definitions, and enable them by including compiler.h
and types.h.  They come with 'const' added for some swab functions, so
fix those up, too:

include/linux/byteorder/big_endian.h:46:2: warning: passing argument 1 of '__swab64p' discards 'const' qualifier from pointer target type [enabled by default]

Also, note: u-boot's historic __BYTE_ORDER definition has been
preserved (for the time being at least).

We also remove ad-hoc barrier() definitions, since we're including
compiler.h in files that hadn't in the past:

macb.c:54:0: warning: "barrier" redefined [enabled by default]

In addition, including compiler.h in byteorder changes the 'noinline'
definition to expand to __attribute__((noinline)).  This fixes
arch/powerpc/lib/bootm.c:

bootm.c:329:16: error: attribute '__attribute__': unknown attribute
bootm.c:329:16: error: expected ')' before '__attribute__'
bootm.c:329:25: error: expected identifier or '(' before ')' token

powerpc sparse builds yield:

include/common.h:356:22: error: marked inline, but without a definition

the unknown-reason inlining without a definition is considered obsolete
given it was part of the 2002 initial commit, and no arm version was
'fixed.'

also fixed:
ydirectenv.h:60:0: warning: "inline" redefined [enabled by default]

and:

Configuring for devconcenter - Board: intip, Options: DEVCONCENTER
make[1]: *** [4xx_ibm_ddr2_autocalib.o] Error 1
make: *** [arch/powerpc/cpu/ppc4xx/libppc4xx.o] Error 2
powerpc-fsl-linux-size: './u-boot': No such file
4xx_ibm_ddr2_autocalib.c: In function 'DQS_autocalibration':
include/asm/ppc4xx-sdram.h:1407:13: sorry, unimplemented: inlining failed in call to 'ppc4xx_ibm_ddr2_register_dump': function body not available
4xx_ibm_ddr2_autocalib.c:1243:32: sorry, unimplemented: called from here

and:

In file included from crc32.c:50:0:
crc32table.h:4:1: warning: implicit declaration of function '___constant_swab32' [-Wimplicit-function-declaration]
crc32table.h:4:1: error: initializer element is not constant
crc32table.h:4:1: error: (near initialization for 'crc32table_le[0]')

Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
[trini: Remove '#endif' in include/common.h around setenv portion]
Signed-off-by: Tom Rini <trini@ti.com>
2012-11-04 11:00:34 -07:00

590 lines
15 KiB
C

/*
* Copyright (C) 2005-2006 Atmel Corporation
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
#include <common.h>
/*
* The u-boot networking stack is a little weird. It seems like the
* networking core allocates receive buffers up front without any
* regard to the hardware that's supposed to actually receive those
* packets.
*
* The MACB receives packets into 128-byte receive buffers, so the
* buffers allocated by the core isn't very practical to use. We'll
* allocate our own, but we need one such buffer in case a packet
* wraps around the DMA ring so that we have to copy it.
*
* Therefore, define CONFIG_SYS_RX_ETH_BUFFER to 1 in the board-specific
* configuration header. This way, the core allocates one RX buffer
* and one TX buffer, each of which can hold a ethernet packet of
* maximum size.
*
* For some reason, the networking core unconditionally specifies a
* 32-byte packet "alignment" (which really should be called
* "padding"). MACB shouldn't need that, but we'll refrain from any
* core modifications here...
*/
#include <net.h>
#include <netdev.h>
#include <malloc.h>
#include <miiphy.h>
#include <linux/mii.h>
#include <asm/io.h>
#include <asm/dma-mapping.h>
#include <asm/arch/clk.h>
#include "macb.h"
#define CONFIG_SYS_MACB_RX_BUFFER_SIZE 4096
#define CONFIG_SYS_MACB_RX_RING_SIZE (CONFIG_SYS_MACB_RX_BUFFER_SIZE / 128)
#define CONFIG_SYS_MACB_TX_RING_SIZE 16
#define CONFIG_SYS_MACB_TX_TIMEOUT 1000
#define CONFIG_SYS_MACB_AUTONEG_TIMEOUT 5000000
struct macb_dma_desc {
u32 addr;
u32 ctrl;
};
#define RXADDR_USED 0x00000001
#define RXADDR_WRAP 0x00000002
#define RXBUF_FRMLEN_MASK 0x00000fff
#define RXBUF_FRAME_START 0x00004000
#define RXBUF_FRAME_END 0x00008000
#define RXBUF_TYPEID_MATCH 0x00400000
#define RXBUF_ADDR4_MATCH 0x00800000
#define RXBUF_ADDR3_MATCH 0x01000000
#define RXBUF_ADDR2_MATCH 0x02000000
#define RXBUF_ADDR1_MATCH 0x04000000
#define RXBUF_BROADCAST 0x80000000
#define TXBUF_FRMLEN_MASK 0x000007ff
#define TXBUF_FRAME_END 0x00008000
#define TXBUF_NOCRC 0x00010000
#define TXBUF_EXHAUSTED 0x08000000
#define TXBUF_UNDERRUN 0x10000000
#define TXBUF_MAXRETRY 0x20000000
#define TXBUF_WRAP 0x40000000
#define TXBUF_USED 0x80000000
struct macb_device {
void *regs;
unsigned int rx_tail;
unsigned int tx_head;
unsigned int tx_tail;
void *rx_buffer;
void *tx_buffer;
struct macb_dma_desc *rx_ring;
struct macb_dma_desc *tx_ring;
unsigned long rx_buffer_dma;
unsigned long rx_ring_dma;
unsigned long tx_ring_dma;
const struct device *dev;
struct eth_device netdev;
unsigned short phy_addr;
};
#define to_macb(_nd) container_of(_nd, struct macb_device, netdev)
static void macb_mdio_write(struct macb_device *macb, u8 reg, u16 value)
{
unsigned long netctl;
unsigned long netstat;
unsigned long frame;
netctl = macb_readl(macb, NCR);
netctl |= MACB_BIT(MPE);
macb_writel(macb, NCR, netctl);
frame = (MACB_BF(SOF, 1)
| MACB_BF(RW, 1)
| MACB_BF(PHYA, macb->phy_addr)
| MACB_BF(REGA, reg)
| MACB_BF(CODE, 2)
| MACB_BF(DATA, value));
macb_writel(macb, MAN, frame);
do {
netstat = macb_readl(macb, NSR);
} while (!(netstat & MACB_BIT(IDLE)));
netctl = macb_readl(macb, NCR);
netctl &= ~MACB_BIT(MPE);
macb_writel(macb, NCR, netctl);
}
static u16 macb_mdio_read(struct macb_device *macb, u8 reg)
{
unsigned long netctl;
unsigned long netstat;
unsigned long frame;
netctl = macb_readl(macb, NCR);
netctl |= MACB_BIT(MPE);
macb_writel(macb, NCR, netctl);
frame = (MACB_BF(SOF, 1)
| MACB_BF(RW, 2)
| MACB_BF(PHYA, macb->phy_addr)
| MACB_BF(REGA, reg)
| MACB_BF(CODE, 2));
macb_writel(macb, MAN, frame);
do {
netstat = macb_readl(macb, NSR);
} while (!(netstat & MACB_BIT(IDLE)));
frame = macb_readl(macb, MAN);
netctl = macb_readl(macb, NCR);
netctl &= ~MACB_BIT(MPE);
macb_writel(macb, NCR, netctl);
return MACB_BFEXT(DATA, frame);
}
#if defined(CONFIG_CMD_MII)
int macb_miiphy_read(const char *devname, u8 phy_adr, u8 reg, u16 *value)
{
struct eth_device *dev = eth_get_dev_by_name(devname);
struct macb_device *macb = to_macb(dev);
if ( macb->phy_addr != phy_adr )
return -1;
*value = macb_mdio_read(macb, reg);
return 0;
}
int macb_miiphy_write(const char *devname, u8 phy_adr, u8 reg, u16 value)
{
struct eth_device *dev = eth_get_dev_by_name(devname);
struct macb_device *macb = to_macb(dev);
if ( macb->phy_addr != phy_adr )
return -1;
macb_mdio_write(macb, reg, value);
return 0;
}
#endif
#if defined(CONFIG_CMD_NET)
static int macb_send(struct eth_device *netdev, void *packet, int length)
{
struct macb_device *macb = to_macb(netdev);
unsigned long paddr, ctrl;
unsigned int tx_head = macb->tx_head;
int i;
paddr = dma_map_single(packet, length, DMA_TO_DEVICE);
ctrl = length & TXBUF_FRMLEN_MASK;
ctrl |= TXBUF_FRAME_END;
if (tx_head == (CONFIG_SYS_MACB_TX_RING_SIZE - 1)) {
ctrl |= TXBUF_WRAP;
macb->tx_head = 0;
} else
macb->tx_head++;
macb->tx_ring[tx_head].ctrl = ctrl;
macb->tx_ring[tx_head].addr = paddr;
barrier();
macb_writel(macb, NCR, MACB_BIT(TE) | MACB_BIT(RE) | MACB_BIT(TSTART));
/*
* I guess this is necessary because the networking core may
* re-use the transmit buffer as soon as we return...
*/
for (i = 0; i <= CONFIG_SYS_MACB_TX_TIMEOUT; i++) {
barrier();
ctrl = macb->tx_ring[tx_head].ctrl;
if (ctrl & TXBUF_USED)
break;
udelay(1);
}
dma_unmap_single(packet, length, paddr);
if (i <= CONFIG_SYS_MACB_TX_TIMEOUT) {
if (ctrl & TXBUF_UNDERRUN)
printf("%s: TX underrun\n", netdev->name);
if (ctrl & TXBUF_EXHAUSTED)
printf("%s: TX buffers exhausted in mid frame\n",
netdev->name);
} else {
printf("%s: TX timeout\n", netdev->name);
}
/* No one cares anyway */
return 0;
}
static void reclaim_rx_buffers(struct macb_device *macb,
unsigned int new_tail)
{
unsigned int i;
i = macb->rx_tail;
while (i > new_tail) {
macb->rx_ring[i].addr &= ~RXADDR_USED;
i++;
if (i > CONFIG_SYS_MACB_RX_RING_SIZE)
i = 0;
}
while (i < new_tail) {
macb->rx_ring[i].addr &= ~RXADDR_USED;
i++;
}
barrier();
macb->rx_tail = new_tail;
}
static int macb_recv(struct eth_device *netdev)
{
struct macb_device *macb = to_macb(netdev);
unsigned int rx_tail = macb->rx_tail;
void *buffer;
int length;
int wrapped = 0;
u32 status;
for (;;) {
if (!(macb->rx_ring[rx_tail].addr & RXADDR_USED))
return -1;
status = macb->rx_ring[rx_tail].ctrl;
if (status & RXBUF_FRAME_START) {
if (rx_tail != macb->rx_tail)
reclaim_rx_buffers(macb, rx_tail);
wrapped = 0;
}
if (status & RXBUF_FRAME_END) {
buffer = macb->rx_buffer + 128 * macb->rx_tail;
length = status & RXBUF_FRMLEN_MASK;
if (wrapped) {
unsigned int headlen, taillen;
headlen = 128 * (CONFIG_SYS_MACB_RX_RING_SIZE
- macb->rx_tail);
taillen = length - headlen;
memcpy((void *)NetRxPackets[0],
buffer, headlen);
memcpy((void *)NetRxPackets[0] + headlen,
macb->rx_buffer, taillen);
buffer = (void *)NetRxPackets[0];
}
NetReceive(buffer, length);
if (++rx_tail >= CONFIG_SYS_MACB_RX_RING_SIZE)
rx_tail = 0;
reclaim_rx_buffers(macb, rx_tail);
} else {
if (++rx_tail >= CONFIG_SYS_MACB_RX_RING_SIZE) {
wrapped = 1;
rx_tail = 0;
}
}
barrier();
}
return 0;
}
static void macb_phy_reset(struct macb_device *macb)
{
struct eth_device *netdev = &macb->netdev;
int i;
u16 status, adv;
adv = ADVERTISE_CSMA | ADVERTISE_ALL;
macb_mdio_write(macb, MII_ADVERTISE, adv);
printf("%s: Starting autonegotiation...\n", netdev->name);
macb_mdio_write(macb, MII_BMCR, (BMCR_ANENABLE
| BMCR_ANRESTART));
for (i = 0; i < CONFIG_SYS_MACB_AUTONEG_TIMEOUT / 100; i++) {
status = macb_mdio_read(macb, MII_BMSR);
if (status & BMSR_ANEGCOMPLETE)
break;
udelay(100);
}
if (status & BMSR_ANEGCOMPLETE)
printf("%s: Autonegotiation complete\n", netdev->name);
else
printf("%s: Autonegotiation timed out (status=0x%04x)\n",
netdev->name, status);
}
#ifdef CONFIG_MACB_SEARCH_PHY
static int macb_phy_find(struct macb_device *macb)
{
int i;
u16 phy_id;
/* Search for PHY... */
for (i = 0; i < 32; i++) {
macb->phy_addr = i;
phy_id = macb_mdio_read(macb, MII_PHYSID1);
if (phy_id != 0xffff) {
printf("%s: PHY present at %d\n", macb->netdev.name, i);
return 1;
}
}
/* PHY isn't up to snuff */
printf("%s: PHY not found\n", macb->netdev.name);
return 0;
}
#endif /* CONFIG_MACB_SEARCH_PHY */
static int macb_phy_init(struct macb_device *macb)
{
struct eth_device *netdev = &macb->netdev;
u32 ncfgr;
u16 phy_id, status, adv, lpa;
int media, speed, duplex;
int i;
#ifdef CONFIG_MACB_SEARCH_PHY
/* Auto-detect phy_addr */
if (!macb_phy_find(macb)) {
return 0;
}
#endif /* CONFIG_MACB_SEARCH_PHY */
/* Check if the PHY is up to snuff... */
phy_id = macb_mdio_read(macb, MII_PHYSID1);
if (phy_id == 0xffff) {
printf("%s: No PHY present\n", netdev->name);
return 0;
}
status = macb_mdio_read(macb, MII_BMSR);
if (!(status & BMSR_LSTATUS)) {
/* Try to re-negotiate if we don't have link already. */
macb_phy_reset(macb);
for (i = 0; i < CONFIG_SYS_MACB_AUTONEG_TIMEOUT / 100; i++) {
status = macb_mdio_read(macb, MII_BMSR);
if (status & BMSR_LSTATUS)
break;
udelay(100);
}
}
if (!(status & BMSR_LSTATUS)) {
printf("%s: link down (status: 0x%04x)\n",
netdev->name, status);
return 0;
} else {
adv = macb_mdio_read(macb, MII_ADVERTISE);
lpa = macb_mdio_read(macb, MII_LPA);
media = mii_nway_result(lpa & adv);
speed = (media & (ADVERTISE_100FULL | ADVERTISE_100HALF)
? 1 : 0);
duplex = (media & ADVERTISE_FULL) ? 1 : 0;
printf("%s: link up, %sMbps %s-duplex (lpa: 0x%04x)\n",
netdev->name,
speed ? "100" : "10",
duplex ? "full" : "half",
lpa);
ncfgr = macb_readl(macb, NCFGR);
ncfgr &= ~(MACB_BIT(SPD) | MACB_BIT(FD));
if (speed)
ncfgr |= MACB_BIT(SPD);
if (duplex)
ncfgr |= MACB_BIT(FD);
macb_writel(macb, NCFGR, ncfgr);
return 1;
}
}
static int macb_init(struct eth_device *netdev, bd_t *bd)
{
struct macb_device *macb = to_macb(netdev);
unsigned long paddr;
int i;
/*
* macb_halt should have been called at some point before now,
* so we'll assume the controller is idle.
*/
/* initialize DMA descriptors */
paddr = macb->rx_buffer_dma;
for (i = 0; i < CONFIG_SYS_MACB_RX_RING_SIZE; i++) {
if (i == (CONFIG_SYS_MACB_RX_RING_SIZE - 1))
paddr |= RXADDR_WRAP;
macb->rx_ring[i].addr = paddr;
macb->rx_ring[i].ctrl = 0;
paddr += 128;
}
for (i = 0; i < CONFIG_SYS_MACB_TX_RING_SIZE; i++) {
macb->tx_ring[i].addr = 0;
if (i == (CONFIG_SYS_MACB_TX_RING_SIZE - 1))
macb->tx_ring[i].ctrl = TXBUF_USED | TXBUF_WRAP;
else
macb->tx_ring[i].ctrl = TXBUF_USED;
}
macb->rx_tail = macb->tx_head = macb->tx_tail = 0;
macb_writel(macb, RBQP, macb->rx_ring_dma);
macb_writel(macb, TBQP, macb->tx_ring_dma);
/* choose RMII or MII mode. This depends on the board */
#ifdef CONFIG_RMII
#if defined(CONFIG_AT91CAP9) || defined(CONFIG_AT91SAM9260) || \
defined(CONFIG_AT91SAM9263) || defined(CONFIG_AT91SAM9G20) || \
defined(CONFIG_AT91SAM9G45) || defined(CONFIG_AT91SAM9M10G45) || \
defined(CONFIG_AT91SAM9XE) || defined(CONFIG_AT91SAM9X5)
macb_writel(macb, USRIO, MACB_BIT(RMII) | MACB_BIT(CLKEN));
#else
macb_writel(macb, USRIO, 0);
#endif
#else
#if defined(CONFIG_AT91CAP9) || defined(CONFIG_AT91SAM9260) || \
defined(CONFIG_AT91SAM9263) || defined(CONFIG_AT91SAM9G20) || \
defined(CONFIG_AT91SAM9G45) || defined(CONFIG_AT91SAM9M10G45) || \
defined(CONFIG_AT91SAM9XE) || defined(CONFIG_AT91SAM9X5)
macb_writel(macb, USRIO, MACB_BIT(CLKEN));
#else
macb_writel(macb, USRIO, MACB_BIT(MII));
#endif
#endif /* CONFIG_RMII */
if (!macb_phy_init(macb))
return -1;
/* Enable TX and RX */
macb_writel(macb, NCR, MACB_BIT(TE) | MACB_BIT(RE));
return 0;
}
static void macb_halt(struct eth_device *netdev)
{
struct macb_device *macb = to_macb(netdev);
u32 ncr, tsr;
/* Halt the controller and wait for any ongoing transmission to end. */
ncr = macb_readl(macb, NCR);
ncr |= MACB_BIT(THALT);
macb_writel(macb, NCR, ncr);
do {
tsr = macb_readl(macb, TSR);
} while (tsr & MACB_BIT(TGO));
/* Disable TX and RX, and clear statistics */
macb_writel(macb, NCR, MACB_BIT(CLRSTAT));
}
static int macb_write_hwaddr(struct eth_device *dev)
{
struct macb_device *macb = to_macb(dev);
u32 hwaddr_bottom;
u16 hwaddr_top;
/* set hardware address */
hwaddr_bottom = dev->enetaddr[0] | dev->enetaddr[1] << 8 |
dev->enetaddr[2] << 16 | dev->enetaddr[3] << 24;
macb_writel(macb, SA1B, hwaddr_bottom);
hwaddr_top = dev->enetaddr[4] | dev->enetaddr[5] << 8;
macb_writel(macb, SA1T, hwaddr_top);
return 0;
}
int macb_eth_initialize(int id, void *regs, unsigned int phy_addr)
{
struct macb_device *macb;
struct eth_device *netdev;
unsigned long macb_hz;
u32 ncfgr;
macb = malloc(sizeof(struct macb_device));
if (!macb) {
printf("Error: Failed to allocate memory for MACB%d\n", id);
return -1;
}
memset(macb, 0, sizeof(struct macb_device));
netdev = &macb->netdev;
macb->rx_buffer = dma_alloc_coherent(CONFIG_SYS_MACB_RX_BUFFER_SIZE,
&macb->rx_buffer_dma);
macb->rx_ring = dma_alloc_coherent(CONFIG_SYS_MACB_RX_RING_SIZE
* sizeof(struct macb_dma_desc),
&macb->rx_ring_dma);
macb->tx_ring = dma_alloc_coherent(CONFIG_SYS_MACB_TX_RING_SIZE
* sizeof(struct macb_dma_desc),
&macb->tx_ring_dma);
macb->regs = regs;
macb->phy_addr = phy_addr;
sprintf(netdev->name, "macb%d", id);
netdev->init = macb_init;
netdev->halt = macb_halt;
netdev->send = macb_send;
netdev->recv = macb_recv;
netdev->write_hwaddr = macb_write_hwaddr;
/*
* Do some basic initialization so that we at least can talk
* to the PHY
*/
macb_hz = get_macb_pclk_rate(id);
if (macb_hz < 20000000)
ncfgr = MACB_BF(CLK, MACB_CLK_DIV8);
else if (macb_hz < 40000000)
ncfgr = MACB_BF(CLK, MACB_CLK_DIV16);
else if (macb_hz < 80000000)
ncfgr = MACB_BF(CLK, MACB_CLK_DIV32);
else
ncfgr = MACB_BF(CLK, MACB_CLK_DIV64);
macb_writel(macb, NCFGR, ncfgr);
eth_register(netdev);
#if defined(CONFIG_CMD_MII)
miiphy_register(netdev->name, macb_miiphy_read, macb_miiphy_write);
#endif
return 0;
}
#endif