u-boot/board/freescale/mx6sabresd
Marco Franchi 6c51a3644e mx6sabresd: Allow LVDS backlight to be functional after a kernel reboot
Currently the LVDS backlight does not work in U-Boot after a “reboot” comand
in the kernel.

This problem occurs because the kernel uses this pin in PWM mode and U-Boot
does not configure the backlight pin as GPIO functionality.

So fix the problem by explicitly configuring the backlight pin as GPIO in
U-Boot.

Signed-off-by: Marco Franchi <marco.franchi@nxp.com>
Acked-by: Stefano Babic <sbabic@denx.de>
Tested-by: Fabio Estevam <fabio.estevam@nxp.com>
2016-06-18 10:25:54 +02:00
..
Kconfig mx6: remove SYS_SOC from board Kconfig 2015-09-13 10:37:29 +02:00
MAINTAINERS MAINTAINERS/mailmap: Update my email address 2016-01-11 11:22:43 -05:00
Makefile board: arm: convert makefiles to Kbuild style 2013-11-01 11:42:12 -04:00
mx6dlsabresd.cfg mx6dlsabresd: Use its own DCD table 2014-09-09 16:55:22 +02:00
mx6q_4x_mt41j128.cfg imx: ddr: Move mx6q_4x_mt41j128.cfg to mx6sabresd board 2014-09-22 16:09:56 +02:00
mx6sabresd.c mx6sabresd: Allow LVDS backlight to be functional after a kernel reboot 2016-06-18 10:25:54 +02:00