u-boot/board/keymile/km83xx/km83xx_i2c.c
Wolfgang Denk 1a4596601f Add GPL-2.0+ SPDX-License-Identifier to source files
Signed-off-by: Wolfgang Denk <wd@denx.de>
[trini: Fixup common/cmd_io.c]
Signed-off-by: Tom Rini <trini@ti.com>
2013-07-24 09:44:38 -04:00

72 lines
1.6 KiB
C

/*
* (C) Copyright 2011
* Holger Brunck, Keymile GmbH Hannover, holger.brunck@keymile.com
*
* SPDX-License-Identifier: GPL-2.0+
*/
#include <common.h>
#include <i2c.h>
#include <asm/io.h>
#include <linux/ctype.h>
#include "../common/common.h"
static void i2c_write_start_seq(void)
{
struct fsl_i2c *dev;
dev = (struct fsl_i2c *) (CONFIG_SYS_IMMR + CONFIG_SYS_I2C_OFFSET);
udelay(DELAY_ABORT_SEQ);
out_8(&dev->cr, (I2C_CR_MEN | I2C_CR_MSTA));
udelay(DELAY_ABORT_SEQ);
out_8(&dev->cr, (I2C_CR_MEN));
}
int i2c_make_abort(void)
{
struct fsl_i2c *dev;
dev = (struct fsl_i2c *) (CONFIG_SYS_IMMR + CONFIG_SYS_I2C_OFFSET);
uchar last;
int nbr_read = 0;
int i = 0;
int ret = 0;
/* wait after each operation to finsh with a delay */
out_8(&dev->cr, (I2C_CR_MSTA));
udelay(DELAY_ABORT_SEQ);
out_8(&dev->cr, (I2C_CR_MEN | I2C_CR_MSTA));
udelay(DELAY_ABORT_SEQ);
in_8(&dev->dr);
udelay(DELAY_ABORT_SEQ);
last = in_8(&dev->dr);
nbr_read++;
/*
* do read until the last bit is 1, but stop if the full eeprom is
* read.
*/
while (((last & 0x01) != 0x01) &&
(nbr_read < CONFIG_SYS_IVM_EEPROM_MAX_LEN)) {
udelay(DELAY_ABORT_SEQ);
last = in_8(&dev->dr);
nbr_read++;
}
if ((last & 0x01) != 0x01)
ret = -2;
if ((last != 0xff) || (nbr_read > 1))
printf("[INFO] i2c abort after %d bytes (0x%02x)\n",
nbr_read, last);
udelay(DELAY_ABORT_SEQ);
out_8(&dev->cr, (I2C_CR_MEN));
udelay(DELAY_ABORT_SEQ);
/* clear status reg */
out_8(&dev->sr, 0);
for (i = 0; i < 5; i++)
i2c_write_start_seq();
if (ret != 0)
printf("[ERROR] i2c abort failed after %d bytes (0x%02x)\n",
nbr_read, last);
return ret;
}