u-boot/drivers/net/phy
Troy Kisky 1adb406b01 phy: add phy_find_by_mask/phy_connect_dev
It is useful to be able to try a range of
possible phy addresses to connect.

Also, an ethernet device is not required
to use phy_find_by_mask leading to better
separation of mii vs ethernet, as suggested
by Andy Fleming.

Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com>
2013-01-28 06:57:50 +01:00
..
Makefile net/phy: support the mv88e6352 switch 2012-09-27 12:21:56 -05:00
atheros.c net/: sparse fixes 2012-11-04 11:00:36 -07:00
broadcom.c phylib: Add a bunch of PHY drivers from tsec 2011-04-20 15:09:34 -05:00
davicom.c phylib: Add a bunch of PHY drivers from tsec 2011-04-20 15:09:34 -05:00
generic_10g.c phylib: Detect link on 10G devices correctly 2011-07-27 23:21:25 +02:00
lxt.c phylib: Add a bunch of PHY drivers from tsec 2011-04-20 15:09:34 -05:00
marvell.c phy: Add support for Marvell 88E1118R 2012-12-15 12:28:22 -06:00
micrel.c net: phy: micrel: make ksz9021 phy accessible 2012-07-11 13:15:30 -05:00
miiphybb.c Replace CONFIG_RELOC_FIXUP_WORKS by CONFIG_NEEDS_MANUAL_RELOC 2010-10-29 21:32:07 +02:00
mv88e61xx.c mv88e61xx: refactor PHY and SWITCH level-code 2013-01-09 04:12:10 +05:30
mv88e61xx.h mv88e61xx: refactor PHY and SWITCH level-code 2013-01-09 04:12:10 +05:30
mv88e6352.c net/phy: support the mv88e6352 switch 2012-09-27 12:21:56 -05:00
natsemi.c phylib: Add a bunch of PHY drivers from tsec 2011-04-20 15:09:34 -05:00
phy.c phy: add phy_find_by_mask/phy_connect_dev 2013-01-28 06:57:50 +01:00
realtek.c phylib: Add a bunch of PHY drivers from tsec 2011-04-20 15:09:34 -05:00
smsc.c phy: Add support for SMSC LAN87xx PHYs 2011-12-05 23:07:59 +01:00
teranetics.c powerpc/85xx: wait for alignment before resetting SERDES RX lanes (SERDES9) 2011-10-20 16:01:37 -05:00
vitesse.c drivers/net/: sparse fixes 2012-11-04 11:00:36 -07:00