u-boot/include/configs/tegra-common.h
Stephen Warren f175603f7c ARM: tegra: set CONFIG_SYS_MMC_MAX_DEVICE
If CONFIG_API is ever to be enabled on Tegra, this define must be set,
since api/api_storage.c uses it.

A couple of annoyting things about CONFIG_SYS_MMC_MAX_DEVICE

1) It isn't documented in README. The same is true for a lot of similar
   defines used by api_storage.c.

2) It doesn't represent MAX_DEVICE but rather NUM_DEVICES, since the
   valid values are 0..n-1 not 0..n.

However, I this patch does not address those shortcomings.

Signed-off-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Tom Warren <twarren@nvidia.com>
2014-05-13 10:41:31 -07:00

160 lines
4.1 KiB
C

/*
* (C) Copyright 2010-2012
* NVIDIA Corporation <www.nvidia.com>
*
* SPDX-License-Identifier: GPL-2.0+
*/
#ifndef _TEGRA_COMMON_H_
#define _TEGRA_COMMON_H_
#include <linux/sizes.h>
#include <linux/stringify.h>
/*
* High Level Configuration Options
*/
#define CONFIG_ARMCORTEXA9 /* This is an ARM V7 CPU core */
#define CONFIG_TEGRA /* which is a Tegra generic machine */
#define CONFIG_SYS_L2CACHE_OFF /* No L2 cache */
#include <asm/arch/tegra.h> /* get chip and board defs */
#define CONFIG_SYS_TIMER_RATE 1000000
#define CONFIG_SYS_TIMER_COUNTER NV_PA_TMRUS_BASE
/*
* Display CPU and Board information
*/
#define CONFIG_DISPLAY_CPUINFO
#define CONFIG_DISPLAY_BOARDINFO
#define CONFIG_CMDLINE_TAG /* enable passing of ATAGs */
/* Environment */
#define CONFIG_ENV_VARS_UBOOT_CONFIG
#define CONFIG_ENV_SIZE 0x2000 /* Total Size Environment */
/*
* Size of malloc() pool
*/
#define CONFIG_SYS_MALLOC_LEN (4 << 20) /* 4MB */
/*
* NS16550 Configuration
*/
#define CONFIG_SYS_NS16550
#define CONFIG_SYS_NS16550_SERIAL
#define CONFIG_SYS_NS16550_REG_SIZE (-4)
#define CONFIG_SYS_NS16550_CLK V_NS16550_CLK
/*
* Common HW configuration.
* If this varies between SoCs later, move to tegraNN-common.h
* Note: This is number of devices, not max device ID.
*/
#define CONFIG_SYS_MMC_MAX_DEVICE 4
/*
* select serial console configuration
*/
#define CONFIG_CONS_INDEX 1
/* allow to overwrite serial and ethaddr */
#define CONFIG_ENV_OVERWRITE
#define CONFIG_BAUDRATE 115200
/* include default commands */
#include <config_cmd_default.h>
/* remove unused commands */
#undef CONFIG_CMD_FLASH /* flinfo, erase, protect */
#undef CONFIG_CMD_FPGA /* FPGA configuration support */
#undef CONFIG_CMD_IMI
#undef CONFIG_CMD_IMLS
#undef CONFIG_CMD_NFS /* NFS support */
#undef CONFIG_CMD_NET /* network support */
/* turn on command-line edit/hist/auto */
#define CONFIG_COMMAND_HISTORY
/* turn on commonly used storage-related commands */
#define CONFIG_PARTITION_UUIDS
#define CONFIG_CMD_PART
#define CONFIG_SYS_NO_FLASH
#define CONFIG_CONSOLE_MUX
#define CONFIG_SYS_CONSOLE_IS_IN_ENV
/*
* Miscellaneous configurable options
*/
#define CONFIG_SYS_PROMPT V_PROMPT
/*
* Increasing the size of the IO buffer as default nfsargs size is more
* than 256 and so it is not possible to edit it
*/
#define CONFIG_SYS_CBSIZE (256 * 2) /* Console I/O Buffer Size */
/* Print Buffer Size */
#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \
sizeof(CONFIG_SYS_PROMPT) + 16)
#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
/* Boot Argument Buffer Size */
#define CONFIG_SYS_BARGSIZE (CONFIG_SYS_CBSIZE)
#define CONFIG_SYS_MEMTEST_START (NV_PA_SDRC_CS0 + 0x600000)
#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MEMTEST_START + 0x100000)
/*-----------------------------------------------------------------------
* Physical Memory Map
*/
#define CONFIG_NR_DRAM_BANKS 1
#define PHYS_SDRAM_1 NV_PA_SDRC_CS0
#define PHYS_SDRAM_1_SIZE 0x20000000 /* 512M */
#define CONFIG_SYS_UBOOT_START CONFIG_SYS_TEXT_BASE
#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1
#define CONFIG_SYS_BOOTMAPSZ (256 << 20) /* 256M */
#define CONFIG_SYS_INIT_RAM_ADDR CONFIG_STACKBASE
#define CONFIG_SYS_INIT_RAM_SIZE CONFIG_SYS_MALLOC_LEN
#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_INIT_RAM_ADDR + \
CONFIG_SYS_INIT_RAM_SIZE - \
GENERATED_GBL_DATA_SIZE)
#define CONFIG_TEGRA_GPIO
#define CONFIG_CMD_GPIO
#define CONFIG_CMD_ENTERRCM
/* Defines for SPL */
#define CONFIG_SPL
#define CONFIG_SPL_FRAMEWORK
#define CONFIG_SPL_RAM_DEVICE
#define CONFIG_SPL_BOARD_INIT
#define CONFIG_SPL_NAND_SIMPLE
#define CONFIG_SPL_MAX_FOOTPRINT (CONFIG_SYS_TEXT_BASE - \
CONFIG_SPL_TEXT_BASE)
#define CONFIG_SYS_SPL_MALLOC_SIZE 0x00010000
#define CONFIG_SPL_LIBCOMMON_SUPPORT
#define CONFIG_SPL_LIBGENERIC_SUPPORT
#define CONFIG_SPL_SERIAL_SUPPORT
#define CONFIG_SPL_GPIO_SUPPORT
#ifdef CONFIG_SPL_BUILD
# define CONFIG_USE_PRIVATE_LIBGCC
#endif
#define CONFIG_SYS_GENERIC_BOARD
/* Misc utility code */
#define CONFIG_BOUNCE_BUFFER
#define CONFIG_CRC32_VERIFY
#ifndef CONFIG_SPL_BUILD
#include <config_distro_defaults.h>
#endif
#endif /* _TEGRA_COMMON_H_ */