u-boot/board/cmi/flash.c
Wolfgang Denk 1a4596601f Add GPL-2.0+ SPDX-License-Identifier to source files
Signed-off-by: Wolfgang Denk <wd@denx.de>
[trini: Fixup common/cmd_io.c]
Signed-off-by: Tom Rini <trini@ti.com>
2013-07-24 09:44:38 -04:00

502 lines
11 KiB
C

/*
* (C) Copyright 2003
* Martin Winistoerfer, martinwinistoerfer@gmx.ch.
*
* SPDX-License-Identifier: GPL-2.0+
*/
/*
* File: flash.c
*
* Discription: This Driver is for 28F320J3A, 28F640J3A and
* 28F128J3A Intel flashs working in 16 Bit mode.
* They are single bank flashs.
*
* Most of this code is taken from existing u-boot
* source code.
*/
#include <common.h>
#include <mpc5xx.h>
#if defined(CONFIG_ENV_IS_IN_FLASH)
# ifndef CONFIG_ENV_ADDR
# define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + CONFIG_ENV_OFFSET)
# endif
# ifndef CONFIG_ENV_SIZE
# define CONFIG_ENV_SIZE CONFIG_ENV_SECT_SIZE
# endif
# ifndef CONFIG_ENV_SECT_SIZE
# define CONFIG_ENV_SECT_SIZE CONFIG_ENV_SIZE
# endif
#endif
#define FLASH_ID_MASK 0xFFFF
#define FLASH_BLOCK_SIZE 0x00010000
#define FLASH_CMD_READ_ID 0x0090
#define FLASH_CMD_RESET 0x00ff
#define FLASH_CMD_BLOCK_ERASE 0x0020
#define FLASH_CMD_ERASE_CONFIRM 0x00D0
#define FLASH_CMD_CLEAR_STATUS 0x0050
#define FLASH_CMD_SUSPEND_ERASE 0x00B0
#define FLASH_CMD_WRITE 0x0040
#define FLASH_CMD_PROTECT 0x0060
#define FLASH_CMD_PROTECT_SET 0x0001
#define FLASH_CMD_PROTECT_CLEAR 0x00D0
#define FLASH_STATUS_DONE 0x0080
flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS];
/*
* Local function prototypes
*/
static ulong flash_get_size (vu_short *addr, flash_info_t *info);
static int write_short (flash_info_t *info, ulong dest, ushort data);
static void flash_get_offsets (ulong base, flash_info_t *info);
/*
* Initialize flash
*/
unsigned long flash_init (void)
{
unsigned long size_b0;
int i;
/* Init: no FLASHes known */
for (i=0; i<CONFIG_SYS_MAX_FLASH_BANKS; ++i) {
flash_info[i].flash_id = FLASH_UNKNOWN;
}
/* Static FLASH Bank configuration here - FIXME XXX */
#if 1
debug ("\n## Get flash bank 1 size @ 0x%08x\n",FLASH_BASE0_PRELIM);
#endif
size_b0 = flash_get_size((vu_short *)FLASH_BASE0_PRELIM, &flash_info[0]);
if (flash_info[0].flash_id == FLASH_UNKNOWN) {
printf ("## Unknown FLASH on Bank 0: "
"ID 0x%lx, Size = 0x%08lx = %ld MB\n",
flash_info[0].flash_id,
size_b0, size_b0<<20);
}
flash_get_offsets (FLASH_BASE0_PRELIM, &flash_info[0]);
flash_info[0].size = size_b0;
#if CONFIG_SYS_MONITOR_BASE >= CONFIG_SYS_FLASH_BASE
/* monitor protection ON by default */
flash_protect(FLAG_PROTECT_SET,
CONFIG_SYS_MONITOR_BASE,
CONFIG_SYS_MONITOR_BASE+monitor_flash_len-1,
&flash_info[0]);
#endif
#ifdef CONFIG_ENV_IS_IN_FLASH
/* ENV protection ON by default */
flash_protect(FLAG_PROTECT_SET,
CONFIG_ENV_ADDR,
CONFIG_ENV_ADDR+CONFIG_ENV_SECT_SIZE-1,
&flash_info[0]);
#endif
return size_b0;
}
/*
* Compute start adress of each sector (block)
*/
static void flash_get_offsets (ulong base, flash_info_t *info)
{
int i;
if (info->flash_id == FLASH_UNKNOWN) {
return;
}
switch (info->flash_id & FLASH_VENDMASK) {
case FLASH_MAN_INTEL:
for (i = 0; i < info->sector_count; i++) {
info->start[i] = base + i * FLASH_BLOCK_SIZE;
}
return;
default:
printf ("Don't know sector offsets for flash type 0x%lx\n",
info->flash_id);
return;
}
}
/*
* Print flash information
*/
void flash_print_info (flash_info_t *info)
{
int i;
if (info->flash_id == FLASH_UNKNOWN) {
printf ("missing or unknown FLASH type\n");
return;
}
switch (info->flash_id & FLASH_VENDMASK) {
case FLASH_MAN_AMD: printf ("AMD "); break;
case FLASH_MAN_FUJ: printf ("Fujitsu "); break;
case FLASH_MAN_SST: printf ("SST "); break;
case FLASH_MAN_STM: printf ("STM "); break;
case FLASH_MAN_INTEL: printf ("Intel "); break;
case FLASH_MAN_MT: printf ("MT "); break;
default: printf ("Unknown Vendor "); break;
}
switch (info->flash_id & FLASH_TYPEMASK) {
case FLASH_28F320J3A: printf ("28F320J3A (32Mbit) 16-Bit\n");
break;
case FLASH_28F640J3A: printf ("28F640J3A (64Mbit) 16-Bit\n");
break;
case FLASH_28F128J3A: printf ("28F128J3A (128Mbit) 16-Bit\n");
break;
default: printf ("Unknown Chip Type\n");
break;
}
if (info->size >= (1 << 20)) {
i = 20;
} else {
i = 10;
}
printf (" Size: %ld %cB in %d Sectors\n",
info->size >> i,
(i == 20) ? 'M' : 'k',
info->sector_count);
printf (" Sector Start Addresses:");
for (i=0; i<info->sector_count; ++i) {
if ((i % 5) == 0)
printf ("\n ");
printf (" %08lX%s",
info->start[i],
info->protect[i] ? " (RO)" : " "
);
}
printf ("\n");
return;
}
/*
* Get size of flash in bytes.
* The following code cannot be run from FLASH!
*/
static ulong flash_get_size (vu_short *addr, flash_info_t *info)
{
vu_short value;
/* Read Manufacturer ID */
addr[0] = FLASH_CMD_READ_ID;
value = addr[0];
switch (value) {
case (AMD_MANUFACT & FLASH_ID_MASK):
info->flash_id = FLASH_MAN_AMD;
break;
case (FUJ_MANUFACT & FLASH_ID_MASK):
info->flash_id = FLASH_MAN_FUJ;
break;
case (SST_MANUFACT & FLASH_ID_MASK):
info->flash_id = FLASH_MAN_SST;
break;
case (STM_MANUFACT & FLASH_ID_MASK):
info->flash_id = FLASH_MAN_STM;
break;
case (INTEL_MANUFACT & FLASH_ID_MASK):
info->flash_id = FLASH_MAN_INTEL;
break;
default:
info->flash_id = FLASH_UNKNOWN;
info->sector_count = 0;
info->size = 0;
addr[0] = FLASH_CMD_RESET; /* restore read mode */
return (0); /* no or unknown flash */
}
value = addr[1]; /* device ID */
switch (value) {
case (INTEL_ID_28F320J3A & FLASH_ID_MASK):
info->flash_id += FLASH_28F320J3A;
info->sector_count = 32;
info->size = 0x00400000;
break; /* => 32 MBit */
case (INTEL_ID_28F640J3A & FLASH_ID_MASK):
info->flash_id += FLASH_28F640J3A;
info->sector_count = 64;
info->size = 0x00800000;
break; /* => 64 MBit */
case (INTEL_ID_28F128J3A & FLASH_ID_MASK):
info->flash_id += FLASH_28F128J3A;
info->sector_count = 128;
info->size = 0x01000000;
break; /* => 128 MBit */
default:
info->flash_id = FLASH_UNKNOWN;
addr[0] = FLASH_CMD_RESET; /* restore read mode */
return (0); /* => no or unknown flash */
}
if (info->sector_count > CONFIG_SYS_MAX_FLASH_SECT) {
printf ("** ERROR: sector count %d > max (%d) **\n",
info->sector_count, CONFIG_SYS_MAX_FLASH_SECT);
info->sector_count = CONFIG_SYS_MAX_FLASH_SECT;
}
addr[0] = FLASH_CMD_RESET; /* restore read mode */
return (info->size);
}
/*
* Erase unprotected sectors
*/
int flash_erase (flash_info_t *info, int s_first, int s_last)
{
int flag, prot, sect;
ulong start, now, last;
if ((s_first < 0) || (s_first > s_last)) {
if (info->flash_id == FLASH_UNKNOWN) {
printf ("- missing\n");
} else {
printf ("- no sectors to erase\n");
}
return 1;
}
if ((info->flash_id & FLASH_VENDMASK) != FLASH_MAN_INTEL) {
printf ("Can erase only Intel flash types - aborted\n");
return 1;
}
prot = 0;
for (sect=s_first; sect<=s_last; ++sect) {
if (info->protect[sect]) {
prot++;
}
}
if (prot) {
printf ("- Warning: %d protected sectors will not be erased!\n",
prot);
} else {
printf ("\n");
}
start = get_timer (0);
last = start;
/* Start erase on unprotected sectors */
for (sect = s_first; sect<=s_last; sect++) {
if (info->protect[sect] == 0) { /* not protected */
vu_short *addr = (vu_short *)(info->start[sect]);
unsigned long status;
/* Disable interrupts which might cause a timeout here */
flag = disable_interrupts();
#ifdef DEBUG
printf("Erase sector %d at start addr 0x%08X", sect, (unsigned int)info->start[sect]);
#endif
*addr = FLASH_CMD_CLEAR_STATUS;
*addr = FLASH_CMD_BLOCK_ERASE;
*addr = FLASH_CMD_ERASE_CONFIRM;
/* re-enable interrupts if necessary */
if (flag)
enable_interrupts();
/* wait at least 80us - let's wait 1 ms */
udelay (1000);
while (((status = *addr) & FLASH_STATUS_DONE) != FLASH_STATUS_DONE) {
if ((now=get_timer(start)) > CONFIG_SYS_FLASH_ERASE_TOUT) {
printf("Flash erase timeout at address %lx\n", info->start[sect]);
*addr = FLASH_CMD_SUSPEND_ERASE;
*addr = FLASH_CMD_RESET;
return 1;
}
/* show that we're waiting */
if ((now - last) > 1000) { /* every second */
putc ('.');
last = now;
}
}
*addr = FLASH_CMD_RESET;
}
}
printf (" done\n");
return 0;
}
/*
* Copy memory to flash, returns:
* 0 - OK
* 1 - write timeout
* 2 - Flash not erased
* 4 - Flash not identified
*/
int write_buff (flash_info_t *info, uchar *src, ulong addr, ulong cnt)
{
ulong cp, wp;
ushort data;
int i, rc;
if (info->flash_id == FLASH_UNKNOWN) {
return 4;
}
wp = (addr & ~1); /* get lower word aligned address */
/*
* handle unaligned start byte
*/
if (addr - wp) {
data = 0;
data = (data << 8) | *src++;
--cnt;
if ((rc = write_short(info, wp, data)) != 0) {
return (rc);
}
wp += 2;
}
/*
* handle word aligned part
*/
while (cnt >= 2) {
data = 0;
for (i=0; i<2; ++i) {
data = (data << 8) | *src++;
}
if ((rc = write_short(info, wp, data)) != 0) {
return (rc);
}
wp += 2;
cnt -= 2;
}
if (cnt == 0) {
return (0);
}
/*
* handle unaligned tail bytes
*/
data = 0;
for (i=0, cp=wp; i<2 && cnt>0; ++i, ++cp) {
data = (data << 8) | *src++;
--cnt;
}
for (; i<2; ++i, ++cp) {
data = (data << 8) | (*(uchar *)cp);
}
return (write_short(info, wp, data));
}
/*
* Write 16 bit (short) to flash
*/
static int write_short (flash_info_t *info, ulong dest, ushort data)
{
vu_short *addr = (vu_short*)(info->start[0]);
ulong start;
int flag;
/* Check if Flash is (sufficiently) erased */
if ((*((vu_short *)dest) & data) != data) {
return (2);
}
/* Disable interrupts which might cause a timeout here */
flag = disable_interrupts();
if (!(info->flash_id & FLASH_VENDMASK)) {
return 4;
}
*addr = FLASH_CMD_ERASE_CONFIRM;
*addr = FLASH_CMD_WRITE;
*((vu_short *)dest) = data;
/* re-enable interrupts if necessary */
if (flag) {
enable_interrupts();
}
/* data polling for D7 */
start = get_timer (0);
/* wait for error or finish */
while(!(addr[0] & FLASH_STATUS_DONE)){
if (get_timer(start) > CONFIG_SYS_FLASH_WRITE_TOUT) {
addr[0] = FLASH_CMD_RESET;
return (1);
}
}
*addr = FLASH_CMD_RESET;
return (0);
}
/*
* Protects a flash sector
*/
int flash_real_protect(flash_info_t *info, long sector, int prot)
{
vu_short *addr = (vu_short*)(info->start[sector]);
ulong start;
*addr = FLASH_CMD_CLEAR_STATUS;
*addr = FLASH_CMD_PROTECT;
if(prot) {
*addr = FLASH_CMD_PROTECT_SET;
} else {
*addr = FLASH_CMD_PROTECT_CLEAR;
}
/* wait for error or finish */
start = get_timer (0);
while(!(addr[0] & FLASH_STATUS_DONE)){
if (get_timer(start) > CONFIG_SYS_FLASH_ERASE_TOUT) {
printf("Flash protect timeout at address %lx\n", info->start[sector]);
addr[0] = FLASH_CMD_RESET;
return (1);
}
}
/* Set software protect flag */
info->protect[sector] = prot;
*addr = FLASH_CMD_RESET;
return (0);
}