u-boot/board/solidrun/mx6cuboxi
Fabio Estevam 205d58699b mx6cuboxi: Load the correct 'fdtfile' variable
Instead of hardcoding the 'fdtfile' variable, let's detect the SoC and
board variant on the fly and change the dtb name.

Based on the scheme done on am335x board.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Tested-By: Vagrant Cascadian <vagrant@debian.org>
Reviewed-by: Tom Rini <trini@konsulko.com>
2015-04-27 13:13:58 +02:00
..
Kconfig mx6: Add initial SPL support for HummingBoard-i2eX 2015-04-22 14:39:06 +02:00
MAINTAINERS mx6cuboxi: Fix the defconfig name 2015-04-27 13:13:57 +02:00
Makefile mx6: Add initial SPL support for HummingBoard-i2eX 2015-04-22 14:39:06 +02:00
mx6cuboxi.c mx6cuboxi: Load the correct 'fdtfile' variable 2015-04-27 13:13:58 +02:00
README mx6: Add initial SPL support for HummingBoard-i2eX 2015-04-22 14:39:06 +02:00

How to use U-boot on Solid-run mx6 hummingboard
-----------------------------------------------

- Build U-boot for hummingboard:

$ make mrproper
$ make mx6cuboxi_defconfig
$ make

This will generate the SPL image called SPL and the u-boot.img.

- Flash the SPL image into the SD card:

sudo dd if=SPL of=/dev/mmcblk0 bs=1k seek=1; sync

- Flash the u-boot.img image into the SD card:

sudo dd if=u-boot.img of=/dev/mmcblk0 bs=1k seek=69; sync

- Insert the SD card in the hummingboard, power it up and U-boot messages
should come up.