u-boot/board/nvidia/p2571
Stephen Warren efbb3d491e ARM: tegra: p2371-2180: A03 board PMIC config update
Rev A03 of P2180 requires some PMIC programming adjustments, yet the
PMIC's own OTP has not been updated. Consequently, U-Boot must make
these changes itself.

NVIDIA's syseng team has confirmed that these changes can be enabled on
all board revisions without issue.

Signed-off-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Tom Warren <twarren@nvidia.com>
2016-07-21 09:31:30 -07:00
..
Kconfig T210: Add support for 64-bit T210-based P2571 board 2015-07-28 10:30:20 -07:00
MAINTAINERS T210: Add support for 64-bit T210-based P2571 board 2015-07-28 10:30:20 -07:00
Makefile T210: P2571: Enable SD-card power via PMIC LDO2 2015-08-05 15:22:51 -07:00
max77620_init.h ARM: tegra: p2371-2180: A03 board PMIC config update 2016-07-21 09:31:30 -07:00
p2571.c ARM: tegra: use DT bindings for GPIO naming 2016-05-31 09:53:56 -07:00
pinmux-config-p2571.h ARM: tegra: use DT bindings for GPIO naming 2016-05-31 09:53:56 -07:00