u-boot/drivers/hwmon
Heiko Schocher 780f13a9e1 hwmon: do not init sensors on startup
The U-Boot Design Principles[1] clearly say:

  Initialize devices only when they are needed within U-Boot, i.e. don't
  initialize the Ethernet interface(s) unless U-Boot performs a download
  over Ethernet; don't initialize any IDE or USB devices unless U-Boot
  actually tries to load files from these, etc. (and don't forget to
  shut down these devices after using them - otherwise nasty things may
  happen when you try to boot your OS).

So, do not initialize and read the sensors on startup.

Signed-off-by: Heiko Schocher <hs@denx.de>
cc: Wolfgang Denk <wd@denx.de>
cc: Holger Brunck <holger.brunck@keymile.com>
2011-08-04 23:30:38 +02:00
..
adm1021.c hwmon: do not init sensors on startup 2011-08-04 23:30:38 +02:00
adt7460.c hwmon: do not init sensors on startup 2011-08-04 23:30:38 +02:00
ds1621.c hwmon: do not init sensors on startup 2011-08-04 23:30:38 +02:00
ds1722.c Misc ds1722 fixups 2009-09-04 21:54:52 +02:00
ds1775.c hwmon: do not init sensors on startup 2011-08-04 23:30:38 +02:00
lm63.c hwmon: do not init sensors on startup 2011-08-04 23:30:38 +02:00
lm73.c hwmon: do not init sensors on startup 2011-08-04 23:30:38 +02:00
lm75.c hwmon: do not init sensors on startup 2011-08-04 23:30:38 +02:00
lm81.c hwmon: do not init sensors on startup 2011-08-04 23:30:38 +02:00
Makefile Switch from archive libraries to partial linking 2010-11-17 21:02:18 +01:00