u-boot/common/cmd_dtt.c
Akshay Saraswat bc5478b275 TMU: Add TMU support in dtt command
Add generic TMU support alongwith i2c sensors in dtt command
to enable temperature reading in cases where TMU is present
along-with/instead-of i2c sensors.

Signed-off-by: Akshay Saraswat <akshay.s@samsung.com>
Acked-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
2013-03-12 17:06:22 +09:00

127 lines
2.8 KiB
C

/*
* (C) Copyright 2001
* Erik Theisen, Wave 7 Optics, etheisen@mindspring.com
*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
#include <common.h>
#include <config.h>
#include <command.h>
#include <dtt.h>
#include <i2c.h>
#include <tmu.h>
#if defined CONFIG_DTT_SENSORS
static unsigned long sensor_initialized;
static void _initialize_dtt(void)
{
int i;
unsigned char sensors[] = CONFIG_DTT_SENSORS;
for (i = 0; i < sizeof(sensors); i++) {
if ((sensor_initialized & (1 << i)) == 0) {
if (dtt_init_one(sensors[i]) != 0) {
printf("DTT%d: Failed init!\n", i);
continue;
}
sensor_initialized |= (1 << i);
}
}
}
void dtt_init(void)
{
int old_bus;
/* switch to correct I2C bus */
old_bus = I2C_GET_BUS();
I2C_SET_BUS(CONFIG_SYS_DTT_BUS_NUM);
_initialize_dtt();
/* switch back to original I2C bus */
I2C_SET_BUS(old_bus);
}
#endif
int dtt_i2c(void)
{
#if defined CONFIG_DTT_SENSORS
int i;
unsigned char sensors[] = CONFIG_DTT_SENSORS;
int old_bus;
/* Force a compilation error, if there are more then 32 sensors */
BUILD_BUG_ON(sizeof(sensors) > 32);
/* switch to correct I2C bus */
old_bus = I2C_GET_BUS();
I2C_SET_BUS(CONFIG_SYS_DTT_BUS_NUM);
_initialize_dtt();
/*
* Loop through sensors, read
* temperature, and output it.
*/
for (i = 0; i < sizeof(sensors); i++)
printf("DTT%d: %i C\n", i + 1, dtt_get_temp(sensors[i]));
/* switch back to original I2C bus */
I2C_SET_BUS(old_bus);
#endif
return 0;
}
int dtt_tmu(void)
{
#if defined CONFIG_TMU_CMD_DTT
int cur_temp;
/* Sense and return latest thermal info */
if (tmu_monitor(&cur_temp) == TMU_STATUS_INIT) {
puts("TMU is in unknown state, temperature is invalid\n");
return -1;
}
printf("Current temperature: %u degrees Celsius\n", cur_temp);
#endif
return 0;
}
int do_dtt(cmd_tbl_t *cmdtp, int flag, int argc, char *const argv[])
{
int err = 0;
err |= dtt_i2c();
err |= dtt_tmu();
return err;
} /* do_dtt() */
/***************************************************/
U_BOOT_CMD(
dtt, 1, 1, do_dtt,
"Read temperature from Digital Thermometer and Thermostat",
""
);