u-boot/board/matrix_vision/mvblm7
Wolfgang Denk 702e6014f1 doc: cleanup - move board READMEs into respective board directories
Also drop a few files referring to no longer / not yet supported
boards.

Signed-off-by: Wolfgang Denk <wd@denx.de>
Cc: Prafulla Wadaskar <prafulla@marvell.com>
Cc: Stefan Roese <sr@denx.de>
Cc: Kim Phillips <kim.phillips@freescale.com>
Cc: Andy Fleming <afleming@gmail.com>
Cc: Jason Jin <jason.jin@freescale.com>
Cc: Stefano Babic <sbabic@denx.de>
Cc: Daniel Schwierzeck <daniel.schwierzeck@googlemail.com>
Acked-by: Stefano Babic <sbabic@denx.de>
Acked-by: Daniel Schwierzeck <daniel.schwierzeck@googlemail.com>
2012-07-29 15:42:02 +02:00
..
bootscript mpc83xx/mvBLM7: add usb commands and cleanup. 2010-05-07 12:20:15 -05:00
fpga.c fpga: constify to fix build warning 2011-08-01 15:19:40 +02:00
fpga.h fpga: constify to fix build warning 2011-08-01 15:19:40 +02:00
Makefile punt unused clean/distclean targets 2011-10-15 22:20:36 +02:00
mvblm7.c Add common code dir for Matrix Vision boards. 2009-08-31 19:55:24 +02:00
mvblm7.h Use common code for Matrix Vision boards 2009-08-28 00:31:23 +02:00
pci.c 83xx: Remove warmboot parameter from PCI init functions 2010-09-23 21:14:42 +02:00
README.mvblm7 doc: cleanup - move board READMEs into respective board directories 2012-07-29 15:42:02 +02:00

Matrix Vision mvBlueLYNX-M7 (mvBL-M7)
-------------------------------------

1.	Board Description

	The mvBL-M7 is a 120x120mm single board computing platform
	with strong focus on stereo image processing applications.

	Power Supply is either VDC 12-48V or Pover over Ethernet (PoE)
	on any port (requires add-on board).

2	System Components

2.1	CPU
	Freescale MPC8343VRAGDB CPU running at 400MHz core and 266MHz csb.
	512MByte DDR-II memory @ 133MHz.
	8 MByte Nor Flash on local bus.
	2 Vitesse VSC8601 RGMII ethernet Phys.
	1 USB host controller over ULPI I/F.
	2 serial ports. Console running on ttyS0 @ 115200 8N1.
	1 SD-Card slot connected to SPI.
	System configuration (HRCW) is taken from I2C EEPROM.

2.2	PCI
	A miniPCI Type-III socket is present. PCI clock fixed at 66MHz.

2.3	FPGA
	Altera Cyclone-II EP2C20/35 with PCI DMA engines.
	Connects to dual Matrix Vision specific CCD/CMOS sensor interfaces.
	Utilizes another 256MB DDR-II memory and 32-128MB Nand Flash.

2.3.1	I/O @ FPGA
	2x8 Outputs : Infineon High-Side Switches to Main Supply.
	2x8 Inputs  : Programmable input threshold + trigger capabilities
	2 dedicated flash interfaces for illuminator boards.
	Cross trigger for chaining several boards.

2.4	I2C
	Bus1:
		MAX5381 DAC @ 0x60 for 1st digital input threshold.
		LM75 @ 0x90 for temperature monitoring.
		EEPROM @ 0xA0 for system setup (HRCW etc.) + vendor specifics.
		1st image sensor interface (slave addresses depend on sensor)
	Bus2:
		MAX5381 DAC @ 0x60 for 2nd digital input threshold.
		2nd image sensor interface (slave addresses depend on sensor)

3	Flash layout.

	reset vector is 0xFFF00100, i.e. "HIGHBOOT".

	FF800000	environment
	FF802000	redundant environment
	FF804000	u-boot script image
	FF806000	redundant u-boot script image
	FF808000	device tree blob
	FF80A000	redundant device tree blob
	FF80C000	tbd.
	FF80E000	tbd.
	FF810000	kernel
	FFC00000	root FS
	FFF00000	u-boot
	FFF80000	FPGA raw bit file

	mtd partitions are propagated to linux kernel via device tree blob.

4	Booting

	On startup the bootscript @ FF804000 is executed. This script can be
	exchanged easily. Default boot mode is "boot from flash", i.e. system
	works stand-alone.

	This behaviour depends on some environment variables :

	"netboot" : yes ->try dhcp/bootp and boot from network.
	A "dhcp_client_id" and "dhcp_vendor-class-identifier" can be used for
	DHCP server configuration, e.g. to provide different images to
	different devices.

	During netboot the system tries to get 3 image files:
	1. Kernel - name + data is given during BOOTP.
	2. Initrd - name is stored in "initrd_name"
	3. device tree blob - name is stored in "dtb_name"
	Fallback files are the flash versions.