u-boot/drivers/misc/pmic_fsl.c
Helmut Raiger 435a728587 misc: pmic: fix regression in pmic_fsl.c (SPI)
This fixes write access to PMIC registers, the bug was
introduced partly in commit 64aac65099 and in commit c9fe76dd91.
It was tested on an i.mx31 with a mc13783.

Signed-off-by: Helmut Raiger <helmut.raiger@hale.at>
Acked-by: Stefano Babic <sbabic@denx.de>
2011-11-03 22:56:18 +01:00

64 lines
1.8 KiB
C

/*
* Copyright (C) 2011 Samsung Electronics
* Lukasz Majewski <l.majewski@samsung.com>
*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
#include <common.h>
#include <spi.h>
#include <pmic.h>
#include <fsl_pmic.h>
#if defined(CONFIG_PMIC_SPI)
static u32 pmic_spi_prepare_tx(u32 reg, u32 *val, u32 write)
{
return (write << 31) | (reg << 25) | (*val & 0x00FFFFFF);
}
#endif
int pmic_init(void)
{
struct pmic *p = get_pmic();
static const char name[] = "FSL_PMIC";
p->name = name;
p->number_of_regs = PMIC_NUM_OF_REGS;
#if defined(CONFIG_PMIC_SPI)
p->interface = PMIC_SPI;
p->bus = CONFIG_FSL_PMIC_BUS;
p->hw.spi.cs = CONFIG_FSL_PMIC_CS;
p->hw.spi.clk = CONFIG_FSL_PMIC_CLK;
p->hw.spi.mode = CONFIG_FSL_PMIC_MODE;
p->hw.spi.bitlen = CONFIG_FSL_PMIC_BITLEN;
p->hw.spi.flags = SPI_XFER_BEGIN | SPI_XFER_END;
p->hw.spi.prepare_tx = pmic_spi_prepare_tx;
#elif defined(CONFIG_PMIC_I2C)
p->interface = PMIC_I2C;
p->hw.i2c.addr = CONFIG_SYS_FSL_PMIC_I2C_ADDR;
p->hw.i2c.tx_num = 3;
p->bus = I2C_PMIC;
#else
#error "You must select CONFIG_PMIC_SPI or CONFIG_PMIC_I2C"
#endif
return 0;
}