u-boot/drivers/net/phy
Priyanka Jain f91ba0ecbc net: Add Vitesse VSC8662 PHY support
-VSC8662 is Dual Port 10/100/1000Base-T Phy,
 100Base-FX/1000/Base-X Gigabit Ethernt Transceiver Phy.

-Its register set and features are similar to
 other Vitesse Phys

Signed-off-by: Priyanka Jain <Priyanka.Jain@freescale.com>
Signed-off-by: York Sun <yorksun@freescale.com>
2012-09-27 12:21:59 -05:00
..
atheros.c phylib: Add a bunch of PHY drivers from tsec 2011-04-20 15:09:34 -05:00
broadcom.c phylib: Add a bunch of PHY drivers from tsec 2011-04-20 15:09:34 -05:00
davicom.c phylib: Add a bunch of PHY drivers from tsec 2011-04-20 15:09:34 -05:00
generic_10g.c phylib: Detect link on 10G devices correctly 2011-07-27 23:21:25 +02:00
lxt.c phylib: Add a bunch of PHY drivers from tsec 2011-04-20 15:09:34 -05:00
Makefile net/phy: support the mv88e6352 switch 2012-09-27 12:21:56 -05:00
marvell.c Phy/Marvell: Rewrite the MV88E1111 phy config function based on kernel code 2011-12-05 21:59:00 +01:00
micrel.c net: phy: micrel: make ksz9021 phy accessible 2012-07-11 13:15:30 -05:00
miiphybb.c Replace CONFIG_RELOC_FIXUP_WORKS by CONFIG_NEEDS_MANUAL_RELOC 2010-10-29 21:32:07 +02:00
mv88e61xx.c miiphy: convert to linux/mii.h 2011-01-09 18:06:50 +01:00
mv88e61xx.h net: phy: bugfixes: mv88E61xx multichip addressing support 2009-07-22 22:53:45 -07:00
mv88e6352.c net/phy: support the mv88e6352 switch 2012-09-27 12:21:56 -05:00
natsemi.c phylib: Add a bunch of PHY drivers from tsec 2011-04-20 15:09:34 -05:00
phy.c phylib: phy_startup() should return an error code on failure 2012-07-11 13:15:30 -05:00
realtek.c phylib: Add a bunch of PHY drivers from tsec 2011-04-20 15:09:34 -05:00
smsc.c phy: Add support for SMSC LAN87xx PHYs 2011-12-05 23:07:59 +01:00
teranetics.c powerpc/85xx: wait for alignment before resetting SERDES RX lanes (SERDES9) 2011-10-20 16:01:37 -05:00
vitesse.c net: Add Vitesse VSC8662 PHY support 2012-09-27 12:21:59 -05:00