373 lines
11 KiB
C
373 lines
11 KiB
C
/*
|
|
* (C) Copyright 2005
|
|
* John Otken, jotken@softadvances.com
|
|
*
|
|
* See file CREDITS for list of people who contributed to this
|
|
* project.
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License as
|
|
* published by the Free Software Foundation; either version 2 of
|
|
* the License, or (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
|
|
* MA 02111-1307 USA
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <command.h>
|
|
#include <ppc4xx.h>
|
|
#include <asm/processor.h>
|
|
#include <spd_sdram.h>
|
|
#include "epld.h"
|
|
|
|
DECLARE_GLOBAL_DATA_PTR;
|
|
|
|
extern flash_info_t flash_info[CFG_MAX_FLASH_BANKS]; /* info for FLASH chips */
|
|
|
|
|
|
/*************************************************************************
|
|
* int board_early_init_f()
|
|
*
|
|
************************************************************************/
|
|
int board_early_init_f(void)
|
|
{
|
|
mtebc( pb0ap, 0x03800000 ); /* set chip selects */
|
|
mtebc( pb0cr, 0xffc58000 ); /* ebc0_b0cr, 4MB at 0xffc00000 CS0 */
|
|
mtebc( pb1ap, 0x03800000 );
|
|
mtebc( pb1cr, 0xff018000 ); /* ebc0_b1cr, 1MB at 0xff000000 CS1 */
|
|
mtebc( pb2ap, 0x03800000 );
|
|
mtebc( pb2cr, 0xff838000 ); /* ebc0_b2cr, 2MB at 0xff800000 CS2 */
|
|
|
|
mtdcr( uic1sr, 0xffffffff ); /* Clear all interrupts */
|
|
mtdcr( uic1er, 0x00000000 ); /* disable all interrupts */
|
|
mtdcr( uic1cr, 0x00000000 ); /* Set Critical / Non Critical interrupts */
|
|
mtdcr( uic1pr, 0x7fff83ff ); /* Set Interrupt Polarities */
|
|
mtdcr( uic1tr, 0x001f8000 ); /* Set Interrupt Trigger Levels */
|
|
mtdcr( uic1vr, 0x00000001 ); /* Set Vect base=0,INT31 Highest priority */
|
|
mtdcr( uic1sr, 0x00000000 ); /* clear all interrupts */
|
|
mtdcr( uic1sr, 0xffffffff );
|
|
|
|
mtdcr( uic0sr, 0xffffffff ); /* Clear all interrupts */
|
|
mtdcr( uic0er, 0x00000000 ); /* disable all interrupts excepted cascade */
|
|
mtdcr( uic0cr, 0x00000001 ); /* Set Critical / Non Critical interrupts */
|
|
mtdcr( uic0pr, 0xffffffff ); /* Set Interrupt Polarities */
|
|
mtdcr( uic0tr, 0x01000004 ); /* Set Interrupt Trigger Levels */
|
|
mtdcr( uic0vr, 0x00000001 ); /* Set Vect base=0,INT31 Highest priority */
|
|
mtdcr( uic0sr, 0x00000000 ); /* clear all interrupts */
|
|
mtdcr( uic0sr, 0xffffffff );
|
|
|
|
return 0;
|
|
}
|
|
|
|
|
|
/*************************************************************************
|
|
* int misc_init_r()
|
|
*
|
|
************************************************************************/
|
|
int misc_init_r(void)
|
|
{
|
|
volatile epld_t *x = (epld_t *) CFG_EPLD_BASE;
|
|
|
|
/* set modes of operation */
|
|
x->ethuart |= EPLD2_ETH_MODE_10 | EPLD2_ETH_MODE_100 |
|
|
EPLD2_ETH_MODE_1000 | EPLD2_ETH_DUPLEX_MODE;
|
|
/* clear ETHERNET_AUTO_NEGO bit to turn on autonegotiation */
|
|
x->ethuart &= ~EPLD2_ETH_AUTO_NEGO;
|
|
|
|
/* put Ethernet+PHY in reset */
|
|
x->ethuart &= ~EPLD2_RESET_ETH_N;
|
|
udelay(10000);
|
|
/* take Ethernet+PHY out of reset */
|
|
x->ethuart |= EPLD2_RESET_ETH_N;
|
|
|
|
return 0;
|
|
}
|
|
|
|
|
|
/*************************************************************************
|
|
* int checkboard()
|
|
*
|
|
************************************************************************/
|
|
int checkboard(void)
|
|
{
|
|
char *s = getenv("serial#");
|
|
|
|
printf("Board: Luan - AMCC PPC440SP Evaluation Board");
|
|
|
|
if (s != NULL) {
|
|
puts(", serial# ");
|
|
puts(s);
|
|
}
|
|
putc('\n');
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* Override the default functions in cpu/ppc4xx/44x_spd_ddr2.c with
|
|
* board specific values.
|
|
*/
|
|
u32 ddr_clktr(u32 default_val) {
|
|
return (SDRAM_CLKTR_CLKP_180_DEG_ADV);
|
|
}
|
|
|
|
/*************************************************************************
|
|
* int testdram()
|
|
*
|
|
************************************************************************/
|
|
#if defined(CFG_DRAM_TEST)
|
|
int testdram(void)
|
|
{
|
|
unsigned long *mem = (unsigned long *) 0;
|
|
const unsigned long kend = (1024 / sizeof(unsigned long));
|
|
unsigned long k, n;
|
|
|
|
mtmsr(0);
|
|
|
|
for (k = 0; k < CFG_KBYTES_SDRAM;
|
|
++k, mem += (1024 / sizeof(unsigned long))) {
|
|
if ((k & 1023) == 0) {
|
|
printf("%3d MB\r", k / 1024);
|
|
}
|
|
|
|
memset(mem, 0xaaaaaaaa, 1024);
|
|
for (n = 0; n < kend; ++n) {
|
|
if (mem[n] != 0xaaaaaaaa) {
|
|
printf("SDRAM test fails at: %08x\n",
|
|
(uint) & mem[n]);
|
|
return 1;
|
|
}
|
|
}
|
|
|
|
memset(mem, 0x55555555, 1024);
|
|
for (n = 0; n < kend; ++n) {
|
|
if (mem[n] != 0x55555555) {
|
|
printf("SDRAM test fails at: %08x\n",
|
|
(uint) & mem[n]);
|
|
return 1;
|
|
}
|
|
}
|
|
}
|
|
printf("SDRAM test passes\n");
|
|
|
|
return 0;
|
|
}
|
|
#endif
|
|
|
|
|
|
/*************************************************************************
|
|
* pci_pre_init
|
|
*
|
|
* This routine is called just prior to registering the hose and gives
|
|
* the board the opportunity to check things. Returning a value of zero
|
|
* indicates that things are bad & PCI initialization should be aborted.
|
|
*
|
|
* Different boards may wish to customize the pci controller structure
|
|
* (add regions, override default access routines, etc) or perform
|
|
* certain pre-initialization actions.
|
|
*
|
|
************************************************************************/
|
|
#if defined(CONFIG_PCI)
|
|
int pci_pre_init( struct pci_controller *hose )
|
|
{
|
|
unsigned long strap;
|
|
|
|
/*--------------------------------------------------------------------------+
|
|
* The luan board is always configured as the host & requires the
|
|
* PCI arbiter to be enabled.
|
|
*--------------------------------------------------------------------------*/
|
|
mfsdr(sdr_sdstp1, strap);
|
|
if( (strap & SDR0_SDSTP1_PAE_MASK) == 0 ) {
|
|
printf("PCI: SDR0_STRP1[%08lX] - PCI Arbiter disabled.\n",strap);
|
|
|
|
return 0;
|
|
}
|
|
|
|
return 1;
|
|
}
|
|
#endif /* defined(CONFIG_PCI) */
|
|
|
|
|
|
/*************************************************************************
|
|
* pci_target_init
|
|
*
|
|
* The bootstrap configuration provides default settings for the pci
|
|
* inbound map (PIM). But the bootstrap config choices are limited and
|
|
* may not be sufficient for a given board.
|
|
*
|
|
************************************************************************/
|
|
#if defined(CONFIG_PCI) && defined(CFG_PCI_TARGET_INIT)
|
|
void pci_target_init(struct pci_controller *hose)
|
|
{
|
|
/*--------------------------------------------------------------------------+
|
|
* Disable everything
|
|
*--------------------------------------------------------------------------*/
|
|
out32r( PCIX0_PIM0SA, 0 ); /* disable */
|
|
out32r( PCIX0_PIM1SA, 0 ); /* disable */
|
|
out32r( PCIX0_PIM2SA, 0 ); /* disable */
|
|
out32r( PCIX0_EROMBA, 0 ); /* disable expansion rom */
|
|
|
|
/*--------------------------------------------------------------------------+
|
|
* Map all of SDRAM to PCI address 0x0000_0000. Note that the 440 strapping
|
|
* options to not support sizes such as 128/256 MB.
|
|
*--------------------------------------------------------------------------*/
|
|
out32r( PCIX0_PIM0LAL, CFG_SDRAM_BASE );
|
|
out32r( PCIX0_PIM0LAH, 0 );
|
|
out32r( PCIX0_PIM0SA, ~(gd->ram_size - 1) | 1 );
|
|
|
|
out32r( PCIX0_BAR0, 0 );
|
|
|
|
/*--------------------------------------------------------------------------+
|
|
* Program the board's subsystem id/vendor id
|
|
*--------------------------------------------------------------------------*/
|
|
out16r( PCIX0_SBSYSVID, CFG_PCI_SUBSYS_VENDORID );
|
|
out16r( PCIX0_SBSYSID, CFG_PCI_SUBSYS_DEVICEID );
|
|
|
|
out16r( PCIX0_CMD, in16r(PCIX0_CMD) | PCI_COMMAND_MEMORY );
|
|
}
|
|
#endif /* defined(CONFIG_PCI) && defined(CFG_PCI_TARGET_INIT) */
|
|
|
|
|
|
/*************************************************************************
|
|
* is_pci_host
|
|
*
|
|
* This routine is called to determine if a pci scan should be
|
|
* performed. With various hardware environments (especially cPCI and
|
|
* PPMC) it's insufficient to depend on the state of the arbiter enable
|
|
* bit in the strap register, or generic host/adapter assumptions.
|
|
*
|
|
* Rather than hard-code a bad assumption in the general 440 code, the
|
|
* 440 pci code requires the board to decide at runtime.
|
|
*
|
|
* Return 0 for adapter mode, non-zero for host (monarch) mode.
|
|
*
|
|
*
|
|
************************************************************************/
|
|
#if defined(CONFIG_PCI)
|
|
int is_pci_host(struct pci_controller *hose)
|
|
{
|
|
return 1;
|
|
}
|
|
#endif /* defined(CONFIG_PCI) */
|
|
|
|
|
|
/*************************************************************************
|
|
* hw_watchdog_reset
|
|
*
|
|
* This routine is called to reset (keep alive) the watchdog timer
|
|
*
|
|
************************************************************************/
|
|
#if defined(CONFIG_HW_WATCHDOG)
|
|
void hw_watchdog_reset(void)
|
|
{
|
|
}
|
|
#endif
|
|
|
|
|
|
/*************************************************************************
|
|
* int on_off()
|
|
*
|
|
************************************************************************/
|
|
static int on_off( const char *s )
|
|
{
|
|
if (strcmp(s, "on") == 0) {
|
|
return 1;
|
|
} else if (strcmp(s, "off") == 0) {
|
|
return 0;
|
|
}
|
|
return -1;
|
|
}
|
|
|
|
|
|
/*************************************************************************
|
|
* void l2cache_disable()
|
|
*
|
|
************************************************************************/
|
|
static void l2cache_disable(void)
|
|
{
|
|
mtdcr( l2_cache_cfg, 0 );
|
|
}
|
|
|
|
|
|
/*************************************************************************
|
|
* void l2cache_enable()
|
|
*
|
|
************************************************************************/
|
|
static void l2cache_enable(void) /* see p258 7.4.1 Enabling L2 Cache */
|
|
{
|
|
mtdcr( l2_cache_cfg, 0x80000000 ); /* enable L2_MODE L2_CFG[L2M] */
|
|
|
|
mtdcr( l2_cache_addr, 0 ); /* set L2_ADDR with all zeros */
|
|
|
|
mtdcr( l2_cache_cmd, 0x80000000 ); /* issue HCLEAR command via L2_CMD */
|
|
|
|
while (!(mfdcr( l2_cache_stat ) & 0x80000000 )) ;; /* poll L2_SR for completion */
|
|
|
|
mtdcr( l2_cache_cmd, 0x10000000 ); /* clear cache errors L2_CMD[CCP] */
|
|
|
|
mtdcr( l2_cache_cmd, 0x08000000 ); /* clear tag errors L2_CMD[CTE] */
|
|
|
|
mtdcr( l2_cache_snp0, 0 ); /* snoop registers */
|
|
mtdcr( l2_cache_snp1, 0 );
|
|
|
|
__asm__ volatile ("sync"); /* msync */
|
|
|
|
mtdcr( l2_cache_cfg, 0xe0000000 ); /* inst and data use L2 */
|
|
|
|
__asm__ volatile ("sync");
|
|
}
|
|
|
|
|
|
/*************************************************************************
|
|
* int l2cache_status()
|
|
*
|
|
************************************************************************/
|
|
static int l2cache_status(void)
|
|
{
|
|
return (mfdcr( l2_cache_cfg ) & 0x60000000) != 0;
|
|
}
|
|
|
|
|
|
/*************************************************************************
|
|
* int do_l2cache()
|
|
*
|
|
************************************************************************/
|
|
int do_l2cache( cmd_tbl_t *cmdtp, int flag, int argc, char *argv[] )
|
|
{
|
|
switch (argc) {
|
|
case 2: /* on / off */
|
|
switch (on_off(argv[1])) {
|
|
case 0: l2cache_disable();
|
|
break;
|
|
case 1: l2cache_enable();
|
|
break;
|
|
}
|
|
/* FALL TROUGH */
|
|
case 1: /* get status */
|
|
printf ("L2 Cache is %s\n",
|
|
l2cache_status() ? "ON" : "OFF");
|
|
return 0;
|
|
default:
|
|
printf ("Usage:\n%s\n", cmdtp->usage);
|
|
return 1;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
|
|
U_BOOT_CMD(
|
|
l2cache, 2, 1, do_l2cache,
|
|
"l2cache - enable or disable L2 cache\n",
|
|
"[on, off]\n"
|
|
" - enable or disable L2 cache\n"
|
|
);
|