u-boot/drivers/serial/usbtty.h
Vipin KUMAR f9da0f8943 Enable high speed support for USB device framework and usbtty
This patch adds the support for high speed in usb device framework and usbtty
driver. This feature has been kept within a macro CONFIG_USBD_HS, so the board
configuration files have to define this macro to enable high speed support.

Along with that specific peripheral drivers also need to define a function to
let the framework know that the enumeration has happened at high speed.
This function prototype is "int is_usbd_high_speed(void)"

Signed-off-by: Vipin Kumar <vipin.kumar@st.com>
Signed-off-by: Amit Virdi <amit.virdi@st.com>
2012-03-28 16:31:08 +02:00

92 lines
2.8 KiB
C

/*
* (C) Copyright 2003
* Gerry Hamel, geh@ti.com, Texas Instruments
*
* (C) Copyright 2006
* Bryan O'Donoghue, bodonoghue@codehermit.ie, CodeHermit
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*
*/
#ifndef __USB_TTY_H__
#define __USB_TTY_H__
#include <usbdevice.h>
#if defined(CONFIG_PPC)
#include <usb/mpc8xx_udc.h>
#elif defined(CONFIG_OMAP1510)
#include <usb/omap1510_udc.h>
#elif defined(CONFIG_MUSB_UDC)
#include <usb/musb_udc.h>
#elif defined(CONFIG_CPU_PXA27X)
#include <usb/pxa27x_udc.h>
#elif defined(CONFIG_DW_UDC)
#include <usb/designware_udc.h>
#endif
#include <version.h>
/* If no VendorID/ProductID is defined in config.h, pretend to be Linux
* DO NOT Reuse this Vendor/Product setup with protocol incompatible devices */
#ifndef CONFIG_USBD_VENDORID
#define CONFIG_USBD_VENDORID 0x0525 /* Linux/NetChip */
#endif
#ifndef CONFIG_USBD_PRODUCTID_GSERIAL
#define CONFIG_USBD_PRODUCTID_GSERIAL 0xa4a6 /* gserial */
#endif
#ifndef CONFIG_USBD_PRODUCTID_CDCACM
#define CONFIG_USBD_PRODUCTID_CDCACM 0xa4a7 /* CDC ACM */
#endif
#ifndef CONFIG_USBD_MANUFACTURER
#define CONFIG_USBD_MANUFACTURER "Das U-Boot"
#endif
#ifndef CONFIG_USBD_PRODUCT_NAME
#define CONFIG_USBD_PRODUCT_NAME U_BOOT_VERSION
#endif
#ifndef CONFIG_USBD_CONFIGURATION_STR
#define CONFIG_USBD_CONFIGURATION_STR "TTY via USB"
#endif
#define CONFIG_USBD_SERIAL_OUT_ENDPOINT UDC_OUT_ENDPOINT
#define CONFIG_USBD_SERIAL_OUT_PKTSIZE UDC_OUT_PACKET_SIZE
#define CONFIG_USBD_SERIAL_IN_ENDPOINT UDC_IN_ENDPOINT
#define CONFIG_USBD_SERIAL_IN_PKTSIZE UDC_IN_PACKET_SIZE
#define CONFIG_USBD_SERIAL_INT_ENDPOINT UDC_INT_ENDPOINT
#define CONFIG_USBD_SERIAL_INT_PKTSIZE UDC_INT_PACKET_SIZE
#define CONFIG_USBD_SERIAL_BULK_PKTSIZE UDC_BULK_PACKET_SIZE
#if defined(CONFIG_USBD_HS)
#define CONFIG_USBD_SERIAL_BULK_HS_PKTSIZE UDC_BULK_HS_PACKET_SIZE
#endif
#define USBTTY_DEVICE_CLASS COMMUNICATIONS_DEVICE_CLASS
#define USBTTY_BCD_DEVICE 0x00
#define USBTTY_MAXPOWER 0x00
#define STR_LANG 0x00
#define STR_MANUFACTURER 0x01
#define STR_PRODUCT 0x02
#define STR_SERIAL 0x03
#define STR_CONFIG 0x04
#define STR_DATA_INTERFACE 0x05
#define STR_CTRL_INTERFACE 0x06
#define STR_COUNT 0x07
#endif