u-boot/board/st
Toshifumi NISHINAGA 4b2fd720a7 stm32: Change USART port to USART6 for stm32f746 discovery board
This change is to remove a halt at about 200KiB
while sending a large(1MiB) binary to a micro controller using USART1.
USART1 is connected to a PC via an on-board ST-Link debugger
that also functions as a USB-Serial converter.
However, it seems to loss some data occasionally.
So I changed the serial port to USART6 and connected it to the PC using
an FTDI USB-Serial cable, therefore the transmission was successfully
completed.

Signed-off-by: Toshifumi NISHINAGA <tnishinaga.dev@gmail.com>
2016-07-14 18:22:44 -04:00
..
stm32f429-discovery gpio: stm32_gpio: move clock config from driver to board 2016-02-24 18:42:49 -05:00
stm32f746-disco stm32: Change USART port to USART6 for stm32f746 discovery board 2016-07-14 18:22:44 -04:00
stv0991 stv0991: configure clock & pad muxing for qspi 2015-07-03 13:50:53 +05:30