u-boot/cmd/sata.c
Simon Glass d97dc8a0e6 dm: sata: Separate the non-command code into its own file
At present the SATA command code includes both the command-processing code
and the core SATA functions and data structures.

Separate the latter into its own file, adding functions as needed to avoid
the command code accessing data structures directly.

With this commit:
- All CONFIG option are referenced from the non-command code
- The concept of a 'current SATA device' is confined to the command code

This will make it easier to convert this code to driver model.

Signed-off-by: Simon Glass <sjg@chromium.org>
2016-05-17 09:54:43 -06:00

134 lines
3.3 KiB
C

/*
* Copyright (C) 2000-2005, DENX Software Engineering
* Wolfgang Denk <wd@denx.de>
* Copyright (C) Procsys. All rights reserved.
* Mushtaq Khan <mushtaq_k@procsys.com>
* <mushtaqk_921@yahoo.co.in>
* Copyright (C) 2008 Freescale Semiconductor, Inc.
* Dave Liu <daveliu@freescale.com>
*
* SPDX-License-Identifier: GPL-2.0+
*/
#include <common.h>
#include <command.h>
#include <part.h>
#include <sata.h>
static int sata_curr_device = -1;
static int do_sata(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
{
int rc = 0;
if (argc == 2 && strcmp(argv[1], "stop") == 0)
return sata_stop();
if (argc == 2 && strcmp(argv[1], "init") == 0) {
if (sata_curr_device != -1)
sata_stop();
return sata_initialize();
}
/* If the user has not yet run `sata init`, do it now */
if (sata_curr_device == -1)
if (sata_initialize())
return 1;
switch (argc) {
case 0:
case 1:
return CMD_RET_USAGE;
case 2:
if (strncmp(argv[1], "inf", 3) == 0) {
blk_list_devices(IF_TYPE_SATA);
return 0;
} else if (strncmp(argv[1], "dev", 3) == 0) {
if (blk_print_device_num(IF_TYPE_SATA,
sata_curr_device)) {
printf("\nno SATA devices available\n");
return CMD_RET_FAILURE;
}
return 0;
} else if (strncmp(argv[1], "part", 4) == 0) {
if (blk_list_part(IF_TYPE_SATA))
puts("\nno SATA devices available\n");
return 0;
}
return CMD_RET_USAGE;
case 3:
if (strncmp(argv[1], "dev", 3) == 0) {
int dev = (int)simple_strtoul(argv[2], NULL, 10);
if (!blk_show_device(IF_TYPE_SATA, dev)) {
sata_curr_device = dev;
printf("... is now current device\n");
} else {
return CMD_RET_FAILURE;
}
return 0;
} else if (strncmp(argv[1], "part", 4) == 0) {
int dev = (int)simple_strtoul(argv[2], NULL, 10);
if (blk_print_part_devnum(IF_TYPE_SATA, dev)) {
printf("\nSATA device %d not available\n",
dev);
return CMD_RET_FAILURE;
}
return rc;
}
return CMD_RET_USAGE;
default: /* at least 4 args */
if (strcmp(argv[1], "read") == 0) {
ulong addr = simple_strtoul(argv[2], NULL, 16);
ulong cnt = simple_strtoul(argv[4], NULL, 16);
ulong n;
lbaint_t blk = simple_strtoul(argv[3], NULL, 16);
printf("\nSATA read: device %d block # %ld, count %ld ... ",
sata_curr_device, blk, cnt);
n = blk_read_devnum(IF_TYPE_SATA, sata_curr_device, blk,
cnt, (ulong *)addr);
printf("%ld blocks read: %s\n",
n, (n==cnt) ? "OK" : "ERROR");
return (n == cnt) ? 0 : 1;
} else if (strcmp(argv[1], "write") == 0) {
ulong addr = simple_strtoul(argv[2], NULL, 16);
ulong cnt = simple_strtoul(argv[4], NULL, 16);
ulong n;
lbaint_t blk = simple_strtoul(argv[3], NULL, 16);
printf("\nSATA write: device %d block # %ld, count %ld ... ",
sata_curr_device, blk, cnt);
n = blk_write_devnum(IF_TYPE_SATA, sata_curr_device,
blk, cnt, (ulong *)addr);
printf("%ld blocks written: %s\n",
n, (n == cnt) ? "OK" : "ERROR");
return (n == cnt) ? 0 : 1;
} else {
return CMD_RET_USAGE;
}
return rc;
}
}
U_BOOT_CMD(
sata, 5, 1, do_sata,
"SATA sub system",
"init - init SATA sub system\n"
"sata stop - disable SATA sub system\n"
"sata info - show available SATA devices\n"
"sata device [dev] - show or set current device\n"
"sata part [dev] - print partition table\n"
"sata read addr blk# cnt\n"
"sata write addr blk# cnt"
);