How to use U-boot on Solid-run mx6 Hummingboard and Cubox-i
-----------------------------------------------------------
- Build U-boot for Hummingboard/Cubox-i:
$ make mrproper
$ make mx6cuboxi_defconfig
$ make
This will generate the SPL image called SPL and the u-boot.img.
- Flash the SPL image into the SD card:
sudo dd if=SPL of=/dev/mmcblk0 bs=1k seek=1; sync
- Flash the u-boot.img image into the SD card:
sudo dd if=u-boot.img of=/dev/mmcblk0 bs=1k seek=69; sync
- Insert the SD card in the board, power it up and U-boot messages should
come up.
c5f18a0b69