u-boot/arch/arm/mach-keystone/cmd_ddr3.c
Masahiro Yamada 39a723452f ARM: keystone: move SoC sources to mach-keystone
Move
arch/arm/cpu/armv7/keystone/* -> arch/arm/mach-keystone/*

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
Cc: Tom Rini <trini@ti.com>
2015-02-21 08:23:52 -05:00

249 lines
6.4 KiB
C

/*
* Keystone2: DDR3 test commands
*
* (C) Copyright 2012-2014
* Texas Instruments Incorporated, <www.ti.com>
*
* SPDX-License-Identifier: GPL-2.0+
*/
#include <asm/arch/hardware.h>
#include <asm/arch/ddr3.h>
#include <common.h>
#include <command.h>
DECLARE_GLOBAL_DATA_PTR;
#define DDR_MIN_ADDR CONFIG_SYS_SDRAM_BASE
#define DDR_REMAP_ADDR 0x80000000
#define ECC_START_ADDR1 ((DDR_MIN_ADDR - DDR_REMAP_ADDR) >> 17)
#define ECC_END_ADDR1 (((gd->start_addr_sp - DDR_REMAP_ADDR - \
CONFIG_STACKSIZE) >> 17) - 2)
#define DDR_TEST_BURST_SIZE 1024
static int ddr_memory_test(u32 start_address, u32 end_address, int quick)
{
u32 index_start, value, index;
index_start = start_address;
while (1) {
/* Write a pattern */
for (index = index_start;
index < index_start + DDR_TEST_BURST_SIZE;
index += 4)
__raw_writel(index, index);
/* Read and check the pattern */
for (index = index_start;
index < index_start + DDR_TEST_BURST_SIZE;
index += 4) {
value = __raw_readl(index);
if (value != index) {
printf("ddr_memory_test: Failed at address index = 0x%x value = 0x%x *(index) = 0x%x\n",
index, value, __raw_readl(index));
return -1;
}
}
index_start += DDR_TEST_BURST_SIZE;
if (index_start >= end_address)
break;
if (quick)
continue;
/* Write a pattern for complementary values */
for (index = index_start;
index < index_start + DDR_TEST_BURST_SIZE;
index += 4)
__raw_writel((u32)~index, index);
/* Read and check the pattern */
for (index = index_start;
index < index_start + DDR_TEST_BURST_SIZE;
index += 4) {
value = __raw_readl(index);
if (value != ~index) {
printf("ddr_memory_test: Failed at address index = 0x%x value = 0x%x *(index) = 0x%x\n",
index, value, __raw_readl(index));
return -1;
}
}
index_start += DDR_TEST_BURST_SIZE;
if (index_start >= end_address)
break;
/* Write a pattern */
for (index = index_start;
index < index_start + DDR_TEST_BURST_SIZE;
index += 2)
__raw_writew((u16)index, index);
/* Read and check the pattern */
for (index = index_start;
index < index_start + DDR_TEST_BURST_SIZE;
index += 2) {
value = __raw_readw(index);
if (value != (u16)index) {
printf("ddr_memory_test: Failed at address index = 0x%x value = 0x%x *(index) = 0x%x\n",
index, value, __raw_readw(index));
return -1;
}
}
index_start += DDR_TEST_BURST_SIZE;
if (index_start >= end_address)
break;
/* Write a pattern */
for (index = index_start;
index < index_start + DDR_TEST_BURST_SIZE;
index += 1)
__raw_writeb((u8)index, index);
/* Read and check the pattern */
for (index = index_start;
index < index_start + DDR_TEST_BURST_SIZE;
index += 1) {
value = __raw_readb(index);
if (value != (u8)index) {
printf("ddr_memory_test: Failed at address index = 0x%x value = 0x%x *(index) = 0x%x\n",
index, value, __raw_readb(index));
return -1;
}
}
index_start += DDR_TEST_BURST_SIZE;
if (index_start >= end_address)
break;
}
puts("ddr memory test PASSED!\n");
return 0;
}
static int ddr_memory_compare(u32 address1, u32 address2, u32 size)
{
u32 index, value, index2, value2;
for (index = address1, index2 = address2;
index < address1 + size;
index += 4, index2 += 4) {
value = __raw_readl(index);
value2 = __raw_readl(index2);
if (value != value2) {
printf("ddr_memory_test: Compare failed at address = 0x%x value = 0x%x, address2 = 0x%x value2 = 0x%x\n",
index, value, index2, value2);
return -1;
}
}
puts("ddr memory compare PASSED!\n");
return 0;
}
static int ddr_memory_ecc_err(u32 base, u32 address, u32 ecc_err)
{
u32 value1, value2, value3;
puts("Disabling DDR ECC ...\n");
ddr3_disable_ecc(base);
value1 = __raw_readl(address);
value2 = value1 ^ ecc_err;
__raw_writel(value2, address);
value3 = __raw_readl(address);
printf("ECC err test, addr 0x%x, read data 0x%x, wrote data 0x%x, err pattern: 0x%x, read after write data 0x%x\n",
address, value1, value2, ecc_err, value3);
__raw_writel(ECC_START_ADDR1 | (ECC_END_ADDR1 << 16),
base + KS2_DDR3_ECC_ADDR_RANGE1_OFFSET);
puts("Enabling DDR ECC ...\n");
ddr3_enable_ecc(base, 1);
value1 = __raw_readl(address);
printf("ECC err test, addr 0x%x, read data 0x%x\n", address, value1);
ddr3_check_ecc_int(base);
return 0;
}
static int do_ddr_test(cmd_tbl_t *cmdtp,
int flag, int argc, char * const argv[])
{
u32 start_addr, end_addr, size, ecc_err;
if ((argc == 4) && (strncmp(argv[1], "ecc_err", 8) == 0)) {
if (!ddr3_ecc_support_rmw(KS2_DDR3A_EMIF_CTRL_BASE)) {
puts("ECC RMW isn't supported for this SOC\n");
return 1;
}
start_addr = simple_strtoul(argv[2], NULL, 16);
ecc_err = simple_strtoul(argv[3], NULL, 16);
if ((start_addr < CONFIG_SYS_SDRAM_BASE) ||
(start_addr > (CONFIG_SYS_SDRAM_BASE +
CONFIG_MAX_RAM_BANK_SIZE - 1))) {
puts("Invalid address!\n");
return cmd_usage(cmdtp);
}
ddr_memory_ecc_err(KS2_DDR3A_EMIF_CTRL_BASE,
start_addr, ecc_err);
return 0;
}
if (!(((argc == 4) && (strncmp(argv[1], "test", 5) == 0)) ||
((argc == 5) && (strncmp(argv[1], "compare", 8) == 0))))
return cmd_usage(cmdtp);
start_addr = simple_strtoul(argv[2], NULL, 16);
end_addr = simple_strtoul(argv[3], NULL, 16);
if ((start_addr < CONFIG_SYS_SDRAM_BASE) ||
(start_addr > (CONFIG_SYS_SDRAM_BASE +
CONFIG_MAX_RAM_BANK_SIZE - 1)) ||
(end_addr < CONFIG_SYS_SDRAM_BASE) ||
(end_addr > (CONFIG_SYS_SDRAM_BASE +
CONFIG_MAX_RAM_BANK_SIZE - 1)) || (start_addr >= end_addr)) {
puts("Invalid start or end address!\n");
return cmd_usage(cmdtp);
}
puts("Please wait ...\n");
if (argc == 5) {
size = simple_strtoul(argv[4], NULL, 16);
ddr_memory_compare(start_addr, end_addr, size);
} else {
ddr_memory_test(start_addr, end_addr, 0);
}
return 0;
}
U_BOOT_CMD(ddr, 5, 1, do_ddr_test,
"DDR3 test",
"test <start_addr in hex> <end_addr in hex> - test DDR from start\n"
" address to end address\n"
"ddr compare <start_addr in hex> <end_addr in hex> <size in hex> -\n"
" compare DDR data of (size) bytes from start address to end\n"
" address\n"
"ddr ecc_err <addr in hex> <bit_err in hex> - generate bit errors\n"
" in DDR data at <addr>, the command will read a 32-bit data\n"
" from <addr>, and write (data ^ bit_err) back to <addr>\n"
);