u-boot/common/cmd_load.c
Simon Glass 4c12eeb8b5 Convert cmd_usage() calls in common to use a return value
Change all files in common/ to use CMD_RET_USAGE instead of calling
cmd_usage() directly. I'm not completely sure about this patch since
the code since impact is small (100 byte or so on ARM) and it might
need splitting into smaller patches. But for now here it is.

Signed-off-by: Simon Glass <sjg@chromium.org>
2012-03-06 21:09:46 +01:00

1120 lines
26 KiB
C

/*
* (C) Copyright 2000-2004
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
/*
* Serial up- and download support
*/
#include <common.h>
#include <command.h>
#include <s_record.h>
#include <net.h>
#include <exports.h>
#include <xyzModem.h>
DECLARE_GLOBAL_DATA_PTR;
#if defined(CONFIG_CMD_LOADB)
static ulong load_serial_ymodem (ulong offset);
#endif
#if defined(CONFIG_CMD_LOADS)
static ulong load_serial (long offset);
static int read_record (char *buf, ulong len);
# if defined(CONFIG_CMD_SAVES)
static int save_serial (ulong offset, ulong size);
static int write_record (char *buf);
#endif
static int do_echo = 1;
#endif
/* -------------------------------------------------------------------- */
#if defined(CONFIG_CMD_LOADS)
int do_load_serial (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
{
long offset = 0;
ulong addr;
int i;
char *env_echo;
int rcode = 0;
#ifdef CONFIG_SYS_LOADS_BAUD_CHANGE
int load_baudrate, current_baudrate;
load_baudrate = current_baudrate = gd->baudrate;
#endif
if (((env_echo = getenv("loads_echo")) != NULL) && (*env_echo == '1')) {
do_echo = 1;
} else {
do_echo = 0;
}
#ifdef CONFIG_SYS_LOADS_BAUD_CHANGE
if (argc >= 2) {
offset = simple_strtol(argv[1], NULL, 16);
}
if (argc == 3) {
load_baudrate = (int)simple_strtoul(argv[2], NULL, 10);
/* default to current baudrate */
if (load_baudrate == 0)
load_baudrate = current_baudrate;
}
if (load_baudrate != current_baudrate) {
printf ("## Switch baudrate to %d bps and press ENTER ...\n",
load_baudrate);
udelay(50000);
gd->baudrate = load_baudrate;
serial_setbrg ();
udelay(50000);
for (;;) {
if (getc() == '\r')
break;
}
}
#else /* ! CONFIG_SYS_LOADS_BAUD_CHANGE */
if (argc == 2) {
offset = simple_strtol(argv[1], NULL, 16);
}
#endif /* CONFIG_SYS_LOADS_BAUD_CHANGE */
printf ("## Ready for S-Record download ...\n");
addr = load_serial (offset);
/*
* Gather any trailing characters (for instance, the ^D which
* is sent by 'cu' after sending a file), and give the
* box some time (100 * 1 ms)
*/
for (i=0; i<100; ++i) {
if (tstc()) {
(void) getc();
}
udelay(1000);
}
if (addr == ~0) {
printf ("## S-Record download aborted\n");
rcode = 1;
} else {
printf ("## Start Addr = 0x%08lX\n", addr);
load_addr = addr;
}
#ifdef CONFIG_SYS_LOADS_BAUD_CHANGE
if (load_baudrate != current_baudrate) {
printf ("## Switch baudrate to %d bps and press ESC ...\n",
current_baudrate);
udelay (50000);
gd->baudrate = current_baudrate;
serial_setbrg ();
udelay (50000);
for (;;) {
if (getc() == 0x1B) /* ESC */
break;
}
}
#endif
return rcode;
}
static ulong
load_serial (long offset)
{
char record[SREC_MAXRECLEN + 1]; /* buffer for one S-Record */
char binbuf[SREC_MAXBINLEN]; /* buffer for binary data */
int binlen; /* no. of data bytes in S-Rec. */
int type; /* return code for record type */
ulong addr; /* load address from S-Record */
ulong size; /* number of bytes transferred */
char buf[32];
ulong store_addr;
ulong start_addr = ~0;
ulong end_addr = 0;
int line_count = 0;
while (read_record(record, SREC_MAXRECLEN + 1) >= 0) {
type = srec_decode (record, &binlen, &addr, binbuf);
if (type < 0) {
return (~0); /* Invalid S-Record */
}
switch (type) {
case SREC_DATA2:
case SREC_DATA3:
case SREC_DATA4:
store_addr = addr + offset;
#ifndef CONFIG_SYS_NO_FLASH
if (addr2info(store_addr)) {
int rc;
rc = flash_write((char *)binbuf,store_addr,binlen);
if (rc != 0) {
flash_perror (rc);
return (~0);
}
} else
#endif
{
memcpy ((char *)(store_addr), binbuf, binlen);
}
if ((store_addr) < start_addr)
start_addr = store_addr;
if ((store_addr + binlen - 1) > end_addr)
end_addr = store_addr + binlen - 1;
break;
case SREC_END2:
case SREC_END3:
case SREC_END4:
udelay (10000);
size = end_addr - start_addr + 1;
printf ("\n"
"## First Load Addr = 0x%08lX\n"
"## Last Load Addr = 0x%08lX\n"
"## Total Size = 0x%08lX = %ld Bytes\n",
start_addr, end_addr, size, size
);
flush_cache (start_addr, size);
sprintf(buf, "%lX", size);
setenv("filesize", buf);
return (addr);
case SREC_START:
break;
default:
break;
}
if (!do_echo) { /* print a '.' every 100 lines */
if ((++line_count % 100) == 0)
putc ('.');
}
}
return (~0); /* Download aborted */
}
static int
read_record (char *buf, ulong len)
{
char *p;
char c;
--len; /* always leave room for terminating '\0' byte */
for (p=buf; p < buf+len; ++p) {
c = getc(); /* read character */
if (do_echo)
putc (c); /* ... and echo it */
switch (c) {
case '\r':
case '\n':
*p = '\0';
return (p - buf);
case '\0':
case 0x03: /* ^C - Control C */
return (-1);
default:
*p = c;
}
/* Check for the console hangup (if any different from serial) */
if (gd->jt[XF_getc] != getc) {
if (ctrlc()) {
return (-1);
}
}
}
/* line too long - truncate */
*p = '\0';
return (p - buf);
}
#if defined(CONFIG_CMD_SAVES)
int do_save_serial (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
{
ulong offset = 0;
ulong size = 0;
#ifdef CONFIG_SYS_LOADS_BAUD_CHANGE
int save_baudrate, current_baudrate;
save_baudrate = current_baudrate = gd->baudrate;
#endif
if (argc >= 2) {
offset = simple_strtoul(argv[1], NULL, 16);
}
#ifdef CONFIG_SYS_LOADS_BAUD_CHANGE
if (argc >= 3) {
size = simple_strtoul(argv[2], NULL, 16);
}
if (argc == 4) {
save_baudrate = (int)simple_strtoul(argv[3], NULL, 10);
/* default to current baudrate */
if (save_baudrate == 0)
save_baudrate = current_baudrate;
}
if (save_baudrate != current_baudrate) {
printf ("## Switch baudrate to %d bps and press ENTER ...\n",
save_baudrate);
udelay(50000);
gd->baudrate = save_baudrate;
serial_setbrg ();
udelay(50000);
for (;;) {
if (getc() == '\r')
break;
}
}
#else /* ! CONFIG_SYS_LOADS_BAUD_CHANGE */
if (argc == 3) {
size = simple_strtoul(argv[2], NULL, 16);
}
#endif /* CONFIG_SYS_LOADS_BAUD_CHANGE */
printf ("## Ready for S-Record upload, press ENTER to proceed ...\n");
for (;;) {
if (getc() == '\r')
break;
}
if(save_serial (offset, size)) {
printf ("## S-Record upload aborted\n");
} else {
printf ("## S-Record upload complete\n");
}
#ifdef CONFIG_SYS_LOADS_BAUD_CHANGE
if (save_baudrate != current_baudrate) {
printf ("## Switch baudrate to %d bps and press ESC ...\n",
(int)current_baudrate);
udelay (50000);
gd->baudrate = current_baudrate;
serial_setbrg ();
udelay (50000);
for (;;) {
if (getc() == 0x1B) /* ESC */
break;
}
}
#endif
return 0;
}
#define SREC3_START "S0030000FC\n"
#define SREC3_FORMAT "S3%02X%08lX%s%02X\n"
#define SREC3_END "S70500000000FA\n"
#define SREC_BYTES_PER_RECORD 16
static int save_serial (ulong address, ulong count)
{
int i, c, reclen, checksum, length;
char *hex = "0123456789ABCDEF";
char record[2*SREC_BYTES_PER_RECORD+16]; /* buffer for one S-Record */
char data[2*SREC_BYTES_PER_RECORD+1]; /* buffer for hex data */
reclen = 0;
checksum = 0;
if(write_record(SREC3_START)) /* write the header */
return (-1);
do {
if(count) { /* collect hex data in the buffer */
c = *(volatile uchar*)(address + reclen); /* get one byte */
checksum += c; /* accumulate checksum */
data[2*reclen] = hex[(c>>4)&0x0f];
data[2*reclen+1] = hex[c & 0x0f];
data[2*reclen+2] = '\0';
++reclen;
--count;
}
if(reclen == SREC_BYTES_PER_RECORD || count == 0) {
/* enough data collected for one record: dump it */
if(reclen) { /* build & write a data record: */
/* address + data + checksum */
length = 4 + reclen + 1;
/* accumulate length bytes into checksum */
for(i = 0; i < 2; i++)
checksum += (length >> (8*i)) & 0xff;
/* accumulate address bytes into checksum: */
for(i = 0; i < 4; i++)
checksum += (address >> (8*i)) & 0xff;
/* make proper checksum byte: */
checksum = ~checksum & 0xff;
/* output one record: */
sprintf(record, SREC3_FORMAT, length, address, data, checksum);
if(write_record(record))
return (-1);
}
address += reclen; /* increment address */
checksum = 0;
reclen = 0;
}
}
while(count);
if(write_record(SREC3_END)) /* write the final record */
return (-1);
return(0);
}
static int
write_record (char *buf)
{
char c;
while((c = *buf++))
putc(c);
/* Check for the console hangup (if any different from serial) */
if (ctrlc()) {
return (-1);
}
return (0);
}
# endif
#endif
#if defined(CONFIG_CMD_LOADB)
/*
* loadb command (load binary) included
*/
#define XON_CHAR 17
#define XOFF_CHAR 19
#define START_CHAR 0x01
#define ETX_CHAR 0x03
#define END_CHAR 0x0D
#define SPACE 0x20
#define K_ESCAPE 0x23
#define SEND_TYPE 'S'
#define DATA_TYPE 'D'
#define ACK_TYPE 'Y'
#define NACK_TYPE 'N'
#define BREAK_TYPE 'B'
#define tochar(x) ((char) (((x) + SPACE) & 0xff))
#define untochar(x) ((int) (((x) - SPACE) & 0xff))
static void set_kerm_bin_mode(unsigned long *);
static int k_recv(void);
static ulong load_serial_bin (ulong offset);
char his_eol; /* character he needs at end of packet */
int his_pad_count; /* number of pad chars he needs */
char his_pad_char; /* pad chars he needs */
char his_quote; /* quote chars he'll use */
int do_load_serial_bin (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
{
ulong offset = 0;
ulong addr;
int load_baudrate, current_baudrate;
int rcode = 0;
char *s;
/* pre-set offset from CONFIG_SYS_LOAD_ADDR */
offset = CONFIG_SYS_LOAD_ADDR;
/* pre-set offset from $loadaddr */
if ((s = getenv("loadaddr")) != NULL) {
offset = simple_strtoul(s, NULL, 16);
}
load_baudrate = current_baudrate = gd->baudrate;
if (argc >= 2) {
offset = simple_strtoul(argv[1], NULL, 16);
}
if (argc == 3) {
load_baudrate = (int)simple_strtoul(argv[2], NULL, 10);
/* default to current baudrate */
if (load_baudrate == 0)
load_baudrate = current_baudrate;
}
if (load_baudrate != current_baudrate) {
printf ("## Switch baudrate to %d bps and press ENTER ...\n",
load_baudrate);
udelay(50000);
gd->baudrate = load_baudrate;
serial_setbrg ();
udelay(50000);
for (;;) {
if (getc() == '\r')
break;
}
}
if (strcmp(argv[0],"loady")==0) {
printf ("## Ready for binary (ymodem) download "
"to 0x%08lX at %d bps...\n",
offset,
load_baudrate);
addr = load_serial_ymodem (offset);
} else {
printf ("## Ready for binary (kermit) download "
"to 0x%08lX at %d bps...\n",
offset,
load_baudrate);
addr = load_serial_bin (offset);
if (addr == ~0) {
load_addr = 0;
printf ("## Binary (kermit) download aborted\n");
rcode = 1;
} else {
printf ("## Start Addr = 0x%08lX\n", addr);
load_addr = addr;
}
}
if (load_baudrate != current_baudrate) {
printf ("## Switch baudrate to %d bps and press ESC ...\n",
current_baudrate);
udelay (50000);
gd->baudrate = current_baudrate;
serial_setbrg ();
udelay (50000);
for (;;) {
if (getc() == 0x1B) /* ESC */
break;
}
}
return rcode;
}
static ulong load_serial_bin (ulong offset)
{
int size, i;
char buf[32];
set_kerm_bin_mode ((ulong *) offset);
size = k_recv ();
/*
* Gather any trailing characters (for instance, the ^D which
* is sent by 'cu' after sending a file), and give the
* box some time (100 * 1 ms)
*/
for (i=0; i<100; ++i) {
if (tstc()) {
(void) getc();
}
udelay(1000);
}
flush_cache (offset, size);
printf("## Total Size = 0x%08x = %d Bytes\n", size, size);
sprintf(buf, "%X", size);
setenv("filesize", buf);
return offset;
}
void send_pad (void)
{
int count = his_pad_count;
while (count-- > 0)
putc (his_pad_char);
}
/* converts escaped kermit char to binary char */
char ktrans (char in)
{
if ((in & 0x60) == 0x40) {
return (char) (in & ~0x40);
} else if ((in & 0x7f) == 0x3f) {
return (char) (in | 0x40);
} else
return in;
}
int chk1 (char *buffer)
{
int total = 0;
while (*buffer) {
total += *buffer++;
}
return (int) ((total + ((total >> 6) & 0x03)) & 0x3f);
}
void s1_sendpacket (char *packet)
{
send_pad ();
while (*packet) {
putc (*packet++);
}
}
static char a_b[24];
void send_ack (int n)
{
a_b[0] = START_CHAR;
a_b[1] = tochar (3);
a_b[2] = tochar (n);
a_b[3] = ACK_TYPE;
a_b[4] = '\0';
a_b[4] = tochar (chk1 (&a_b[1]));
a_b[5] = his_eol;
a_b[6] = '\0';
s1_sendpacket (a_b);
}
void send_nack (int n)
{
a_b[0] = START_CHAR;
a_b[1] = tochar (3);
a_b[2] = tochar (n);
a_b[3] = NACK_TYPE;
a_b[4] = '\0';
a_b[4] = tochar (chk1 (&a_b[1]));
a_b[5] = his_eol;
a_b[6] = '\0';
s1_sendpacket (a_b);
}
void (*os_data_init) (void);
void (*os_data_char) (char new_char);
static int os_data_state, os_data_state_saved;
static char *os_data_addr, *os_data_addr_saved;
static char *bin_start_address;
static void bin_data_init (void)
{
os_data_state = 0;
os_data_addr = bin_start_address;
}
static void os_data_save (void)
{
os_data_state_saved = os_data_state;
os_data_addr_saved = os_data_addr;
}
static void os_data_restore (void)
{
os_data_state = os_data_state_saved;
os_data_addr = os_data_addr_saved;
}
static void bin_data_char (char new_char)
{
switch (os_data_state) {
case 0: /* data */
*os_data_addr++ = new_char;
break;
}
}
static void set_kerm_bin_mode (unsigned long *addr)
{
bin_start_address = (char *) addr;
os_data_init = bin_data_init;
os_data_char = bin_data_char;
}
/* k_data_* simply handles the kermit escape translations */
static int k_data_escape, k_data_escape_saved;
void k_data_init (void)
{
k_data_escape = 0;
os_data_init ();
}
void k_data_save (void)
{
k_data_escape_saved = k_data_escape;
os_data_save ();
}
void k_data_restore (void)
{
k_data_escape = k_data_escape_saved;
os_data_restore ();
}
void k_data_char (char new_char)
{
if (k_data_escape) {
/* last char was escape - translate this character */
os_data_char (ktrans (new_char));
k_data_escape = 0;
} else {
if (new_char == his_quote) {
/* this char is escape - remember */
k_data_escape = 1;
} else {
/* otherwise send this char as-is */
os_data_char (new_char);
}
}
}
#define SEND_DATA_SIZE 20
char send_parms[SEND_DATA_SIZE];
char *send_ptr;
/* handle_send_packet interprits the protocol info and builds and
sends an appropriate ack for what we can do */
void handle_send_packet (int n)
{
int length = 3;
int bytes;
/* initialize some protocol parameters */
his_eol = END_CHAR; /* default end of line character */
his_pad_count = 0;
his_pad_char = '\0';
his_quote = K_ESCAPE;
/* ignore last character if it filled the buffer */
if (send_ptr == &send_parms[SEND_DATA_SIZE - 1])
--send_ptr;
bytes = send_ptr - send_parms; /* how many bytes we'll process */
do {
if (bytes-- <= 0)
break;
/* handle MAXL - max length */
/* ignore what he says - most I'll take (here) is 94 */
a_b[++length] = tochar (94);
if (bytes-- <= 0)
break;
/* handle TIME - time you should wait for my packets */
/* ignore what he says - don't wait for my ack longer than 1 second */
a_b[++length] = tochar (1);
if (bytes-- <= 0)
break;
/* handle NPAD - number of pad chars I need */
/* remember what he says - I need none */
his_pad_count = untochar (send_parms[2]);
a_b[++length] = tochar (0);
if (bytes-- <= 0)
break;
/* handle PADC - pad chars I need */
/* remember what he says - I need none */
his_pad_char = ktrans (send_parms[3]);
a_b[++length] = 0x40; /* He should ignore this */
if (bytes-- <= 0)
break;
/* handle EOL - end of line he needs */
/* remember what he says - I need CR */
his_eol = untochar (send_parms[4]);
a_b[++length] = tochar (END_CHAR);
if (bytes-- <= 0)
break;
/* handle QCTL - quote control char he'll use */
/* remember what he says - I'll use '#' */
his_quote = send_parms[5];
a_b[++length] = '#';
if (bytes-- <= 0)
break;
/* handle QBIN - 8-th bit prefixing */
/* ignore what he says - I refuse */
a_b[++length] = 'N';
if (bytes-- <= 0)
break;
/* handle CHKT - the clock check type */
/* ignore what he says - I do type 1 (for now) */
a_b[++length] = '1';
if (bytes-- <= 0)
break;
/* handle REPT - the repeat prefix */
/* ignore what he says - I refuse (for now) */
a_b[++length] = 'N';
if (bytes-- <= 0)
break;
/* handle CAPAS - the capabilities mask */
/* ignore what he says - I only do long packets - I don't do windows */
a_b[++length] = tochar (2); /* only long packets */
a_b[++length] = tochar (0); /* no windows */
a_b[++length] = tochar (94); /* large packet msb */
a_b[++length] = tochar (94); /* large packet lsb */
} while (0);
a_b[0] = START_CHAR;
a_b[1] = tochar (length);
a_b[2] = tochar (n);
a_b[3] = ACK_TYPE;
a_b[++length] = '\0';
a_b[length] = tochar (chk1 (&a_b[1]));
a_b[++length] = his_eol;
a_b[++length] = '\0';
s1_sendpacket (a_b);
}
/* k_recv receives a OS Open image file over kermit line */
static int k_recv (void)
{
char new_char;
char k_state, k_state_saved;
int sum;
int done;
int length;
int n, last_n;
int len_lo, len_hi;
/* initialize some protocol parameters */
his_eol = END_CHAR; /* default end of line character */
his_pad_count = 0;
his_pad_char = '\0';
his_quote = K_ESCAPE;
/* initialize the k_recv and k_data state machine */
done = 0;
k_state = 0;
k_data_init ();
k_state_saved = k_state;
k_data_save ();
n = 0; /* just to get rid of a warning */
last_n = -1;
/* expect this "type" sequence (but don't check):
S: send initiate
F: file header
D: data (multiple)
Z: end of file
B: break transmission
*/
/* enter main loop */
while (!done) {
/* set the send packet pointer to begining of send packet parms */
send_ptr = send_parms;
/* With each packet, start summing the bytes starting with the length.
Save the current sequence number.
Note the type of the packet.
If a character less than SPACE (0x20) is received - error.
*/
#if 0
/* OLD CODE, Prior to checking sequence numbers */
/* first have all state machines save current states */
k_state_saved = k_state;
k_data_save ();
#endif
/* get a packet */
/* wait for the starting character or ^C */
for (;;) {
switch (getc ()) {
case START_CHAR: /* start packet */
goto START;
case ETX_CHAR: /* ^C waiting for packet */
return (0);
default:
;
}
}
START:
/* get length of packet */
sum = 0;
new_char = getc ();
if ((new_char & 0xE0) == 0)
goto packet_error;
sum += new_char & 0xff;
length = untochar (new_char);
/* get sequence number */
new_char = getc ();
if ((new_char & 0xE0) == 0)
goto packet_error;
sum += new_char & 0xff;
n = untochar (new_char);
--length;
/* NEW CODE - check sequence numbers for retried packets */
/* Note - this new code assumes that the sequence number is correctly
* received. Handling an invalid sequence number adds another layer
* of complexity that may not be needed - yet! At this time, I'm hoping
* that I don't need to buffer the incoming data packets and can write
* the data into memory in real time.
*/
if (n == last_n) {
/* same sequence number, restore the previous state */
k_state = k_state_saved;
k_data_restore ();
} else {
/* new sequence number, checkpoint the download */
last_n = n;
k_state_saved = k_state;
k_data_save ();
}
/* END NEW CODE */
/* get packet type */
new_char = getc ();
if ((new_char & 0xE0) == 0)
goto packet_error;
sum += new_char & 0xff;
k_state = new_char;
--length;
/* check for extended length */
if (length == -2) {
/* (length byte was 0, decremented twice) */
/* get the two length bytes */
new_char = getc ();
if ((new_char & 0xE0) == 0)
goto packet_error;
sum += new_char & 0xff;
len_hi = untochar (new_char);
new_char = getc ();
if ((new_char & 0xE0) == 0)
goto packet_error;
sum += new_char & 0xff;
len_lo = untochar (new_char);
length = len_hi * 95 + len_lo;
/* check header checksum */
new_char = getc ();
if ((new_char & 0xE0) == 0)
goto packet_error;
if (new_char != tochar ((sum + ((sum >> 6) & 0x03)) & 0x3f))
goto packet_error;
sum += new_char & 0xff;
/* --length; */ /* new length includes only data and block check to come */
}
/* bring in rest of packet */
while (length > 1) {
new_char = getc ();
if ((new_char & 0xE0) == 0)
goto packet_error;
sum += new_char & 0xff;
--length;
if (k_state == DATA_TYPE) {
/* pass on the data if this is a data packet */
k_data_char (new_char);
} else if (k_state == SEND_TYPE) {
/* save send pack in buffer as is */
*send_ptr++ = new_char;
/* if too much data, back off the pointer */
if (send_ptr >= &send_parms[SEND_DATA_SIZE])
--send_ptr;
}
}
/* get and validate checksum character */
new_char = getc ();
if ((new_char & 0xE0) == 0)
goto packet_error;
if (new_char != tochar ((sum + ((sum >> 6) & 0x03)) & 0x3f))
goto packet_error;
/* get END_CHAR */
new_char = getc ();
if (new_char != END_CHAR) {
packet_error:
/* restore state machines */
k_state = k_state_saved;
k_data_restore ();
/* send a negative acknowledge packet in */
send_nack (n);
} else if (k_state == SEND_TYPE) {
/* crack the protocol parms, build an appropriate ack packet */
handle_send_packet (n);
} else {
/* send simple acknowledge packet in */
send_ack (n);
/* quit if end of transmission */
if (k_state == BREAK_TYPE)
done = 1;
}
}
return ((ulong) os_data_addr - (ulong) bin_start_address);
}
static int getcxmodem(void) {
if (tstc())
return (getc());
return -1;
}
static ulong load_serial_ymodem (ulong offset)
{
int size;
char buf[32];
int err;
int res;
connection_info_t info;
char ymodemBuf[1024];
ulong store_addr = ~0;
ulong addr = 0;
size = 0;
info.mode = xyzModem_ymodem;
res = xyzModem_stream_open (&info, &err);
if (!res) {
while ((res =
xyzModem_stream_read (ymodemBuf, 1024, &err)) > 0) {
store_addr = addr + offset;
size += res;
addr += res;
#ifndef CONFIG_SYS_NO_FLASH
if (addr2info (store_addr)) {
int rc;
rc = flash_write ((char *) ymodemBuf,
store_addr, res);
if (rc != 0) {
flash_perror (rc);
return (~0);
}
} else
#endif
{
memcpy ((char *) (store_addr), ymodemBuf,
res);
}
}
} else {
printf ("%s\n", xyzModem_error (err));
}
xyzModem_stream_close (&err);
xyzModem_stream_terminate (false, &getcxmodem);
flush_cache (offset, size);
printf ("## Total Size = 0x%08x = %d Bytes\n", size, size);
sprintf (buf, "%X", size);
setenv ("filesize", buf);
return offset;
}
#endif
/* -------------------------------------------------------------------- */
#if defined(CONFIG_CMD_LOADS)
#ifdef CONFIG_SYS_LOADS_BAUD_CHANGE
U_BOOT_CMD(
loads, 3, 0, do_load_serial,
"load S-Record file over serial line",
"[ off ] [ baud ]\n"
" - load S-Record file over serial line"
" with offset 'off' and baudrate 'baud'"
);
#else /* ! CONFIG_SYS_LOADS_BAUD_CHANGE */
U_BOOT_CMD(
loads, 2, 0, do_load_serial,
"load S-Record file over serial line",
"[ off ]\n"
" - load S-Record file over serial line with offset 'off'"
);
#endif /* CONFIG_SYS_LOADS_BAUD_CHANGE */
/*
* SAVES always requires LOADS support, but not vice versa
*/
#if defined(CONFIG_CMD_SAVES)
#ifdef CONFIG_SYS_LOADS_BAUD_CHANGE
U_BOOT_CMD(
saves, 4, 0, do_save_serial,
"save S-Record file over serial line",
"[ off ] [size] [ baud ]\n"
" - save S-Record file over serial line"
" with offset 'off', size 'size' and baudrate 'baud'"
);
#else /* ! CONFIG_SYS_LOADS_BAUD_CHANGE */
U_BOOT_CMD(
saves, 3, 0, do_save_serial,
"save S-Record file over serial line",
"[ off ] [size]\n"
" - save S-Record file over serial line with offset 'off' and size 'size'"
);
#endif /* CONFIG_SYS_LOADS_BAUD_CHANGE */
#endif
#endif
#if defined(CONFIG_CMD_LOADB)
U_BOOT_CMD(
loadb, 3, 0, do_load_serial_bin,
"load binary file over serial line (kermit mode)",
"[ off ] [ baud ]\n"
" - load binary file over serial line"
" with offset 'off' and baudrate 'baud'"
);
U_BOOT_CMD(
loady, 3, 0, do_load_serial_bin,
"load binary file over serial line (ymodem mode)",
"[ off ] [ baud ]\n"
" - load binary file over serial line"
" with offset 'off' and baudrate 'baud'"
);
#endif
/* -------------------------------------------------------------------- */
#if defined(CONFIG_CMD_HWFLOW)
int do_hwflow (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
{
extern int hwflow_onoff(int);
if (argc == 2) {
if (strcmp(argv[1], "off") == 0)
hwflow_onoff(-1);
else
if (strcmp(argv[1], "on") == 0)
hwflow_onoff(1);
else
return CMD_RET_USAGE;
}
printf("RTS/CTS hardware flow control: %s\n", hwflow_onoff(0) ? "on" : "off");
return 0;
}
/* -------------------------------------------------------------------- */
U_BOOT_CMD(
hwflow, 2, 0, do_hwflow,
"turn RTS/CTS hardware flow control in serial line on/off",
"[on|off]"
);
#endif