sysmo-bts
/
u-boot
9
0
Fork 0
Code Pull Requests Releases Activity
u-boot/include/configs
History
Haiying Wang 765547dc5e MPC85xx: Add MPC8569MDS board support 
This patch adds MPC8569MDS board support. The UART, QE UEC1 and UEC2, BRD
EEPROM on I2C2 bus, PCI express and DDR3 SPD are supported in this patch.

Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
Signed-off-by: Hillel Avni <Hillel.Avni@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
 		2009-03-30 13:33:51 -05:00
..
A3000.h rename CFG_ macros to CONFIG_SYS 2008-10-18 21:54:03 +02:00
ADCIOP.h rename CFG_ macros to CONFIG_SYS 2008-10-18 21:54:03 +02:00
ADNPESC1.h Separate mtdparts command from jffs2 2009-03-20 22:39:14 +01:00
ADNPESC1_base_32.h rename CFG_ macros to CONFIG_SYS 2008-10-18 21:54:03 +02:00
ADS860.h rename CFG_ macros to CONFIG_SYS 2008-10-18 21:54:03 +02:00
AMX860.h rename CFG_ macros to CONFIG_SYS 2008-10-18 21:54:03 +02:00
AP1000.h rename CFG_ macros to CONFIG_SYS 2008-10-18 21:54:03 +02:00
APC405.h rename CFG_ macros to CONFIG_SYS 2008-10-18 21:54:03 +02:00
AR405.h Changed PPC4xx EMAC driver to require CONFIG_PPC4xx_EMAC 2008-11-09 21:38:04 -08:00
ASH405.h ppc4xx: Remove CONFIG_SYS_IGNORE_405_UART_ERRATA_59 from config files 2009-01-26 10:40:42 +01:00
ATUM8548.h Remove unused CONFIG_ADDR_STREAMING defines 2008-12-14 12:42:42 +01:00
Adder.h rename CFG_ macros to CONFIG_SYS 2008-10-18 21:54:03 +02:00
AdderUSB.h rename CFG_ macros to CONFIG_SYS 2008-10-18 21:54:03 +02:00
Alaska8220.h Separate mtdparts command from jffs2 2009-03-20 22:39:14 +01:00
AmigaOneG3SE.h rename CFG_ macros to CONFIG_SYS 2008-10-18 21:54:03 +02:00
B2.h rename CFG_ macros to CONFIG_SYS 2008-10-18 21:54:03 +02:00
BAB7xx.h Separate mtdparts command from jffs2 2009-03-20 22:39:14 +01:00
BC3450.h Separate mtdparts command from jffs2 2009-03-20 22:39:14 +01:00
BMW.h rename CFG_ macros to CONFIG_SYS 2008-10-18 21:54:03 +02:00
CANBT.h rename CFG_ macros to CONFIG_SYS 2008-10-18 21:54:03 +02:00
CATcenter.h Separate mtdparts command from jffs2 2009-03-20 22:39:14 +01:00
CCM.h rename CFG_ macros to CONFIG_SYS 2008-10-18 21:54:03 +02:00
CMS700.h ppc4xx: Remove CONFIG_SYS_IGNORE_405_UART_ERRATA_59 from config files 2009-01-26 10:40:42 +01:00
CPC45.h rename CFG_ macros to CONFIG_SYS 2008-10-18 21:54:03 +02:00
CPCI2DP.h ppc4xx: Remove CONFIG_SYS_IGNORE_405_UART_ERRATA_59 from config files 2009-01-26 10:40:42 +01:00
CPCI405.h ppc4xx: Remove CONFIG_SYS_IGNORE_405_UART_ERRATA_59 from config files 2009-01-26 10:40:42 +01:00
CPCI405AB.h ppc4xx: Abort autoboot only by space key on CPCI405 boards 2009-03-20 22:39:13 +01:00
CPCI405DT.h ppc4xx: Remove CONFIG_SYS_IGNORE_405_UART_ERRATA_59 from config files 2009-01-26 10:40:42 +01:00
CPCI750.h rename CFG_ macros to CONFIG_SYS 2008-10-18 21:54:03 +02:00
CPCI4052.h ppc4xx: Abort autoboot only by space key on CPCI405 boards 2009-03-20 22:39:13 +01:00
CPCIISER4.h Changed PPC4xx EMAC driver to require CONFIG_PPC4xx_EMAC 2008-11-09 21:38:04 -08:00
CPU86.h rename CFG_ macros to CONFIG_SYS 2008-10-18 21:54:03 +02:00
CPU87.h rename CFG_ macros to CONFIG_SYS 2008-10-18 21:54:03 +02:00
CRAYL1.h rename CONFIG_CMD_ENV to CONFIG_CMD_SAVEENV 2009-02-18 00:47:43 +01:00
CU824.h rename CFG_ macros to CONFIG_SYS 2008-10-18 21:54:03 +02:00
DASA_SIM.h ppc4xx: Update TEXT_BASE for DASA_SIM boards 2009-03-20 22:39:13 +01:00
DB64360.h Separate mtdparts command from jffs2 2009-03-20 22:39:14 +01:00
DB64460.h Separate mtdparts command from jffs2 2009-03-20 22:39:14 +01:00
DK1C20.h Separate mtdparts command from jffs2 2009-03-20 22:39:14 +01:00
DK1C20_safe_32.h rename CFG_ macros to CONFIG_SYS 2008-10-18 21:54:03 +02:00
DK1C20_standard_32.h rename CFG_ macros to CONFIG_SYS 2008-10-18 21:54:03 +02:00
DK1S10.h Separate mtdparts command from jffs2 2009-03-20 22:39:14 +01:00
DK1S10_mtx_ldk_20.h rename CFG_ macros to CONFIG_SYS 2008-10-18 21:54:03 +02:00
DK1S10_safe_32.h rename CFG_ macros to CONFIG_SYS 2008-10-18 21:54:03 +02:00
DK1S10_standard_32.h rename CFG_ macros to CONFIG_SYS 2008-10-18 21:54:03 +02:00
DP405.h ppc4xx: Remove CONFIG_SYS_IGNORE_405_UART_ERRATA_59 from config files 2009-01-26 10:40:42 +01:00
DU405.h ppc4xx: DU405 maintenance fix 2009-03-20 22:39:13 +01:00
DU440.h NAND: rename NAND_MAX_CHIPS to CONFIG_SYS_NAND_MAX_CHIPS 2009-01-23 10:32:51 -06:00
EB+MCF-EV123.h ColdFire: Modules header files cleanup 2008-11-03 09:45:58 -07:00
ELPPC.h Separate mtdparts command from jffs2 2009-03-20 22:39:14 +01:00
ELPT860.h rename CFG_ macros to CONFIG_SYS 2008-10-18 21:54:03 +02:00
EP1C20.h rename CFG_ macros to CONFIG_SYS 2008-10-18 21:54:03 +02:00
EP1S10.h rename CONFIG_CMD_ENV to CONFIG_CMD_SAVEENV 2009-02-18 00:47:43 +01:00
EP1S40.h rename CONFIG_CMD_ENV to CONFIG_CMD_SAVEENV 2009-02-18 00:47:43 +01:00
EP88x.h rename CFG_ macros to CONFIG_SYS 2008-10-18 21:54:03 +02:00
ERIC.h rename CONFIG_CMD_ENV to CONFIG_CMD_SAVEENV 2009-02-18 00:47:43 +01:00
ESTEEM192E.h rename CFG_ macros to CONFIG_SYS 2008-10-18 21:54:03 +02:00
ETX094.h rename CFG_ macros to CONFIG_SYS 2008-10-18 21:54:03 +02:00
EVB64260.h rename CFG_ macros to CONFIG_SYS 2008-10-18 21:54:03 +02:00
EXBITGEN.h Changed PPC4xx EMAC driver to require CONFIG_PPC4xx_EMAC 2008-11-09 21:38:04 -08:00
FADS823.h rename CFG_ macros to CONFIG_SYS 2008-10-18 21:54:03 +02:00
FADS850SAR.h rename CFG_ macros to CONFIG_SYS 2008-10-18 21:54:03 +02:00
FADS860T.h rename CFG_ macros to CONFIG_SYS 2008-10-18 21:54:03 +02:00
FLAGADM.h 8xx, icache: enabling ICache not before running from RAM 2009-03-18 20:48:29 +01:00
FPS850L.h Separate mtdparts command from jffs2 2009-03-20 22:39:14 +01:00
FPS860L.h Separate mtdparts command from jffs2 2009-03-20 22:39:14 +01:00
G2000.h ppc4xx: Remove CONFIG_SYS_IGNORE_405_UART_ERRATA_59 from config files 2009-01-26 10:40:42 +01:00
GEN860T.h rename CFG_ macros to CONFIG_SYS 2008-10-18 21:54:03 +02:00
GENIETV.h rename CFG_ macros to CONFIG_SYS 2008-10-18 21:54:03 +02:00
GTH.h rename CFG_ macros to CONFIG_SYS 2008-10-18 21:54:03 +02:00
HH405.h ppc4xx: Use correct io accessors for esd 405/440 boards 2009-03-20 22:39:14 +01:00
HIDDEN_DRAGON.h rename CFG_ macros to CONFIG_SYS 2008-10-18 21:54:03 +02:00
HMI10.h rename CFG_ macros to CONFIG_SYS 2008-10-18 21:54:03 +02:00
HUB405.h ppc4xx: Remove CONFIG_SYS_IGNORE_405_UART_ERRATA_59 from config files 2009-01-26 10:40:42 +01:00
IAD210.h boards: move board_get_enetaddr() into board-specific init 2009-03-20 22:39:12 +01:00
ICU862.h rename CFG_ macros to CONFIG_SYS 2008-10-18 21:54:03 +02:00
IDS8247.h NAND: rename NAND_MAX_CHIPS to CONFIG_SYS_NAND_MAX_CHIPS 2009-01-23 10:32:51 -06:00
IP860.h 8xx, icache: enabling ICache not before running from RAM 2009-03-18 20:48:29 +01:00
IPHASE4539.h rename CFG_ macros to CONFIG_SYS 2008-10-18 21:54:03 +02:00
ISPAN.h rename CFG_ macros to CONFIG_SYS 2008-10-18 21:54:03 +02:00
IVML24.h rename CFG_ macros to CONFIG_SYS 2008-10-18 21:54:03 +02:00
IVMS8.h rename CFG_ macros to CONFIG_SYS 2008-10-18 21:54:03 +02:00
IceCube.h net: removed board-specific CONFIGs from MPC5xxx FEC driver 2009-02-09 23:01:40 -08:00
JSE.h Changed PPC4xx EMAC driver to require CONFIG_PPC4xx_EMAC 2008-11-09 21:38:04 -08:00
KAREF.h Changed PPC4xx EMAC driver to require CONFIG_PPC4xx_EMAC 2008-11-09 21:38:04 -08:00
KUP4K.h rename CFG_ macros to CONFIG_SYS 2008-10-18 21:54:03 +02:00
KUP4X.h rename CFG_ macros to CONFIG_SYS 2008-10-18 21:54:03 +02:00
LANTEC.h Separate mtdparts command from jffs2 2009-03-20 22:39:14 +01:00
M5235EVB.h ColdFire: Provide gzip image size V2 & V3 platforms 2009-03-17 15:58:37 -06:00
M5249EVB.h ColdFire: Modules header files cleanup 2008-11-03 09:45:58 -07:00
M5253DEMO.h ColdFire: Provide gzip image size V2 & V3 platforms 2009-03-17 15:58:37 -06:00
M5253EVBE.h ColdFire: Provide gzip image size V2 & V3 platforms 2009-03-17 15:58:37 -06:00
M5271EVB.h Coldfire: M5271EVB: Board header update (dependencies) 2009-02-06 14:54:47 -07:00
M5272C3.h ColdFire: Use CFI driver for M5272C3 2008-11-03 09:45:58 -07:00
M5275EVB.h ColdFire: Provide gzip image size V2 & V3 platforms 2009-03-17 15:58:37 -06:00
M5282EVB.h ColdFire: Modules header files cleanup 2008-11-03 09:45:58 -07:00
M5329EVB.h ColdFire: Provide gzip image size V2 & V3 platforms 2009-03-17 15:58:37 -06:00
M5373EVB.h ColdFire: Provide gzip image size V2 & V3 platforms 2009-03-17 15:58:37 -06:00
M5475EVB.h rename CFG_ macros to CONFIG_SYS 2008-10-18 21:54:03 +02:00
M5485EVB.h rename CFG_ macros to CONFIG_SYS 2008-10-18 21:54:03 +02:00
M52277EVB.h ColdFire: Provide gzip image size V2 & V3 platforms 2009-03-17 15:58:37 -06:00
M53017EVB.h ColdFire: Provide gzip image size V2 & V3 platforms 2009-03-17 15:58:37 -06:00
M54451EVB.h rename CFG_ macros to CONFIG_SYS 2008-10-18 21:54:03 +02:00
M54455EVB.h rename CFG_ macros to CONFIG_SYS 2008-10-18 21:54:03 +02:00
MBX.h rename CFG_ macros to CONFIG_SYS 2008-10-18 21:54:03 +02:00
MBX860T.h ppc: cleanup compiler errors/warnings 2009-03-27 20:23:32 +01:00
METROBOX.h Changed PPC4xx EMAC driver to require CONFIG_PPC4xx_EMAC 2008-11-09 21:38:04 -08:00
MHPC.h Separate mtdparts command from jffs2 2009-03-20 22:39:14 +01:00
MIP405.h Separate mtdparts command from jffs2 2009-03-20 22:39:14 +01:00
ML2.h Separate mtdparts command from jffs2 2009-03-20 22:39:14 +01:00
MOUSSE.h rename CFG_ macros to CONFIG_SYS 2008-10-18 21:54:03 +02:00
MPC86xADS.h rename CFG_ macros to CONFIG_SYS 2008-10-18 21:54:03 +02:00
MPC832XEMDS.h 83xx: Use common LSDMR defines from asm/fsl_lbc.h 2009-03-30 13:33:49 -05:00
MPC837XEMDS.h rename CONFIG_CMD_ENV to CONFIG_CMD_SAVEENV 2009-02-18 00:47:43 +01:00
MPC837XERDB.h mpc83xx: MPC837XERDB: Add PCIe support 2009-02-23 15:52:35 -06:00
MPC885ADS.h rename CFG_ macros to CONFIG_SYS 2008-10-18 21:54:03 +02:00
MPC8260ADS.h rename CFG_ macros to CONFIG_SYS 2008-10-18 21:54:03 +02:00
MPC8266ADS.h Separate mtdparts command from jffs2 2009-03-20 22:39:14 +01:00
MPC8313ERDB.h rename CONFIG_CMD_ENV to CONFIG_CMD_SAVEENV 2009-02-18 00:47:43 +01:00
MPC8315ERDB.h rename CONFIG_CMD_ENV to CONFIG_CMD_SAVEENV 2009-02-18 00:47:43 +01:00
MPC8323ERDB.h 83xx: Use common LSDMR defines from asm/fsl_lbc.h 2009-03-30 13:33:49 -05:00
MPC8349EMDS.h 83xx: Use common LSDMR defines from asm/fsl_lbc.h 2009-03-30 13:33:49 -05:00
MPC8349ITX.h MPC8349ITX: several config issues fixed 2009-03-05 18:13:45 -06:00
MPC8360EMDS.h 83xx: Use common LSDMR defines from asm/fsl_lbc.h 2009-03-30 13:33:49 -05:00
MPC8360ERDK.h rename CONFIG_CMD_ENV to CONFIG_CMD_SAVEENV 2009-02-18 00:47:43 +01:00
MPC8536DS.h 85xx: Add eSDHC support for 8536 DS 2009-02-16 18:07:43 -06:00
MPC8540ADS.h 85xx: Use common LSDMR defines from asm/fsl_lbc.h 2009-03-30 13:33:49 -05:00
MPC8540EVAL.h rename CONFIG_CMD_ENV to CONFIG_CMD_SAVEENV 2009-02-18 00:47:43 +01:00
MPC8541CDS.h 85xx: Use common LSDMR defines from asm/fsl_lbc.h 2009-03-30 13:33:49 -05:00
MPC8544DS.h 85xx: Introduce CONFIG_SYS_PCI*_IO_VIRT for FSL boards 2009-01-23 17:03:13 -06:00
MPC8548CDS.h 85xx: Use common LSDMR defines from asm/fsl_lbc.h 2009-03-30 13:33:49 -05:00
MPC8555CDS.h 85xx: Use common LSDMR defines from asm/fsl_lbc.h 2009-03-30 13:33:49 -05:00
MPC8560ADS.h 85xx: Use common LSDMR defines from asm/fsl_lbc.h 2009-03-30 13:33:49 -05:00
MPC8568MDS.h 85xx: Use common LSDMR defines from asm/fsl_lbc.h 2009-03-30 13:33:49 -05:00
MPC8569MDS.h MPC85xx: Add MPC8569MDS board support 2009-03-30 13:33:51 -05:00
MPC8572DS.h 85xx: Fix address map for 36-bit config of MPC8572DS 2009-02-16 18:05:52 -06:00
MPC8610HPCD.h rename CONFIG_CMD_ENV to CONFIG_CMD_SAVEENV 2009-02-18 00:47:43 +01:00
MPC8641HPCN.h rename CONFIG_CMD_ENV to CONFIG_CMD_SAVEENV 2009-02-18 00:47:43 +01:00
MUSENKI.h rename CFG_ macros to CONFIG_SYS 2008-10-18 21:54:03 +02:00
MVBC_P.h rename CFG_ macros to CONFIG_SYS 2008-10-18 21:54:03 +02:00
MVBLM7.h Removed unused CONFIG_L1_INIT_RAM symbol. 2008-12-03 22:48:32 -06:00
MVBLUE.h rename CONFIG_CMD_ENV to CONFIG_CMD_SAVEENV 2009-02-18 00:47:43 +01:00
MVS1.h rename CONFIG_CMD_ENV to CONFIG_CMD_SAVEENV 2009-02-18 00:47:43 +01:00
MigoR.h rename CONFIG_CMD_ENV to CONFIG_CMD_SAVEENV 2009-02-18 00:47:43 +01:00
NC650.h Separate mtdparts command from jffs2 2009-03-20 22:39:14 +01:00
NETPHONE.h NAND: rename NAND_MAX_CHIPS to CONFIG_SYS_NAND_MAX_CHIPS 2009-01-23 10:32:51 -06:00
NETTA.h Separate mtdparts command from jffs2 2009-03-20 22:39:14 +01:00
NETTA2.h NAND: rename NAND_MAX_CHIPS to CONFIG_SYS_NAND_MAX_CHIPS 2009-01-23 10:32:51 -06:00
NETVIA.h NAND: rename NAND_MAX_CHIPS to CONFIG_SYS_NAND_MAX_CHIPS 2009-01-23 10:32:51 -06:00
NSCU.h rename CFG_ macros to CONFIG_SYS 2008-10-18 21:54:03 +02:00
NX823.h rename CFG_ macros to CONFIG_SYS 2008-10-18 21:54:03 +02:00
OCRTC.h ppc4xx: Remove CONFIG_SYS_IGNORE_405_UART_ERRATA_59 from config files 2009-01-26 10:40:42 +01:00
ORSG.h ppc4xx: Remove CONFIG_SYS_IGNORE_405_UART_ERRATA_59 from config files 2009-01-26 10:40:42 +01:00
OXC.h rename CFG_ macros to CONFIG_SYS 2008-10-18 21:54:03 +02:00
P3G4.h rename CFG_ macros to CONFIG_SYS 2008-10-18 21:54:03 +02:00
PATI.h rename CONFIG_CMD_ENV to CONFIG_CMD_SAVEENV 2009-02-18 00:47:43 +01:00
PCI405.h ppc4xx: Remove CONFIG_SYS_IGNORE_405_UART_ERRATA_59 from config files 2009-01-26 10:40:42 +01:00
PCI5441.h rename CONFIG_CMD_ENV to CONFIG_CMD_SAVEENV 2009-02-18 00:47:43 +01:00
PCIPPC2.h rename CFG_ macros to CONFIG_SYS 2008-10-18 21:54:03 +02:00
PCIPPC6.h rename CFG_ macros to CONFIG_SYS 2008-10-18 21:54:03 +02:00
PIP405.h Changed PPC4xx EMAC driver to require CONFIG_PPC4xx_EMAC 2008-11-09 21:38:04 -08:00
PK1C20.h rename CONFIG_CMD_ENV to CONFIG_CMD_SAVEENV 2009-02-18 00:47:43 +01:00
PLU405.h ppc4xx: Remove CONFIG_SYS_IGNORE_405_UART_ERRATA_59 from config files 2009-01-26 10:40:42 +01:00
PM520.h net: removed board-specific CONFIGs from MPC5xxx FEC driver 2009-02-09 23:01:40 -08:00
PM826.h rename CFG_ macros to CONFIG_SYS 2008-10-18 21:54:03 +02:00
PM828.h rename CFG_ macros to CONFIG_SYS 2008-10-18 21:54:03 +02:00
PM854.h rename CONFIG_CMD_ENV to CONFIG_CMD_SAVEENV 2009-02-18 00:47:43 +01:00
PM856.h rename CONFIG_CMD_ENV to CONFIG_CMD_SAVEENV 2009-02-18 00:47:43 +01:00
PMC405.h ppc4xx: Update PMC405 board support 2009-02-18 13:50:35 +01:00
PMC440.h NAND: rename NAND_MAX_CHIPS to CONFIG_SYS_NAND_MAX_CHIPS 2009-01-23 10:32:51 -06:00
PN62.h rename CONFIG_CMD_ENV to CONFIG_CMD_SAVEENV 2009-02-18 00:47:43 +01:00
PPChameleonEVB.h Separate mtdparts command from jffs2 2009-03-20 22:39:14 +01:00
QS823.h rename CONFIG_CMD_ENV to CONFIG_CMD_SAVEENV 2009-02-18 00:47:43 +01:00
QS850.h rename CONFIG_CMD_ENV to CONFIG_CMD_SAVEENV 2009-02-18 00:47:43 +01:00
QS860T.h rename CFG_ macros to CONFIG_SYS 2008-10-18 21:54:03 +02:00
R360MPI.h Separate mtdparts command from jffs2 2009-03-20 22:39:14 +01:00
RBC823.h Separate mtdparts command from jffs2 2009-03-20 22:39:14 +01:00
RPXClassic.h boards: move board_get_enetaddr() into board-specific init 2009-03-20 22:39:12 +01:00
RPXlite.h rename CFG_ macros to CONFIG_SYS 2008-10-18 21:54:03 +02:00
RPXlite_DW.h rename CFG_ macros to CONFIG_SYS 2008-10-18 21:54:03 +02:00
RPXsuper.h rename CFG_ macros to CONFIG_SYS 2008-10-18 21:54:03 +02:00
RRvision.h rename CFG_ macros to CONFIG_SYS 2008-10-18 21:54:03 +02:00
Rattler.h Separate mtdparts command from jffs2 2009-03-20 22:39:14 +01:00
SBC8540.h rename CONFIG_CMD_ENV to CONFIG_CMD_SAVEENV 2009-02-18 00:47:43 +01:00
SCM.h rename CFG_ macros to CONFIG_SYS 2008-10-18 21:54:03 +02:00
SIMPC8313.h Separate mtdparts command from jffs2 2009-03-20 22:39:14 +01:00
SL8245.h rename CFG_ macros to CONFIG_SYS 2008-10-18 21:54:03 +02:00
SM850.h rename CFG_ macros to CONFIG_SYS 2008-10-18 21:54:03 +02:00
SMN42.h rename CFG_ macros to CONFIG_SYS 2008-10-18 21:54:03 +02:00
SPD823TS.h rename CONFIG_CMD_ENV to CONFIG_CMD_SAVEENV 2009-02-18 00:47:43 +01:00
SX1.h SX1: add hardware V2 support 2009-01-29 22:57:41 +01:00
SXNI855T.h Separate mtdparts command from jffs2 2009-03-20 22:39:14 +01:00
Sandpoint8240.h rename CFG_ macros to CONFIG_SYS 2008-10-18 21:54:03 +02:00
Sandpoint8245.h rename CFG_ macros to CONFIG_SYS 2008-10-18 21:54:03 +02:00
TASREG.h ColdFire: Modules header files cleanup 2008-11-03 09:45:58 -07:00
TB5200.h Separate mtdparts command from jffs2 2009-03-20 22:39:14 +01:00
TK885D.h rename CFG_ macros to CONFIG_SYS 2008-10-18 21:54:03 +02:00
TOP860.h rename CFG_ macros to CONFIG_SYS 2008-10-18 21:54:03 +02:00
TOP5200.h net: removed board-specific CONFIGs from MPC5xxx FEC driver 2009-02-09 23:01:40 -08:00
TQM85xx.h Add multi-chip NAND support for the TQM8548 modules 2009-03-23 15:53:41 -05:00
TQM823L.h Separate mtdparts command from jffs2 2009-03-20 22:39:14 +01:00
TQM823M.h Separate mtdparts command from jffs2 2009-03-20 22:39:14 +01:00
TQM834x.h Separate mtdparts command from jffs2 2009-03-20 22:39:14 +01:00
TQM850L.h Separate mtdparts command from jffs2 2009-03-20 22:39:14 +01:00
TQM850M.h Separate mtdparts command from jffs2 2009-03-20 22:39:14 +01:00
TQM855L.h Separate mtdparts command from jffs2 2009-03-20 22:39:14 +01:00
TQM855M.h Separate mtdparts command from jffs2 2009-03-20 22:39:14 +01:00
TQM860L.h Separate mtdparts command from jffs2 2009-03-20 22:39:14 +01:00
TQM860M.h Separate mtdparts command from jffs2 2009-03-20 22:39:14 +01:00
TQM862L.h Separate mtdparts command from jffs2 2009-03-20 22:39:14 +01:00
TQM862M.h Separate mtdparts command from jffs2 2009-03-20 22:39:14 +01:00
TQM866M.h Separate mtdparts command from jffs2 2009-03-20 22:39:14 +01:00
TQM885D.h Enable ext2 support for TQM8xxL/M based boards 2009-02-21 21:51:21 +01:00
TQM5200.h Separate mtdparts command from jffs2 2009-03-20 22:39:14 +01:00
TQM8260.h TQM8260: fix locations of kernel and ramdisk images in flash 2009-02-17 10:26:38 +01:00
TQM8272.h NAND: rename NAND_MAX_CHIPS to CONFIG_SYS_NAND_MAX_CHIPS 2009-01-23 10:32:51 -06:00
Total5200.h mpc52xx: Get rid of board-specific #ifdef's in cpu/mpc5xxx/ide.c 2009-03-18 20:54:56 +01:00
VCMA9.h usb.h: use standard __LITTLE_ENDIAN from Linux headers 2009-01-28 19:57:29 +01:00
VOH405.h ppc4xx: Remove CONFIG_SYS_IGNORE_405_UART_ERRATA_59 from config files 2009-01-26 10:40:42 +01:00
VOM405.h ppc4xx: Remove CONFIG_SYS_IGNORE_405_UART_ERRATA_59 from config files 2009-01-26 10:40:42 +01:00
VoVPN-GW.h rename CONFIG_CMD_ENV to CONFIG_CMD_SAVEENV 2009-02-18 00:47:43 +01:00
W7OLMC.h Changed PPC4xx EMAC driver to require CONFIG_PPC4xx_EMAC 2008-11-09 21:38:04 -08:00
W7OLMG.h Changed PPC4xx EMAC driver to require CONFIG_PPC4xx_EMAC 2008-11-09 21:38:04 -08:00
WUH405.h ppc4xx: Remove CONFIG_SYS_IGNORE_405_UART_ERRATA_59 from config files 2009-01-26 10:40:42 +01:00
XPEDITE1K.h boards: move board_get_enetaddr() into board-specific init 2009-03-20 22:39:12 +01:00
XPEDITE5200.h rename CONFIG_CMD_ENV to CONFIG_CMD_SAVEENV 2009-02-18 00:47:43 +01:00
XPEDITE5370.h rename CONFIG_CMD_ENV to CONFIG_CMD_SAVEENV 2009-02-18 00:47:43 +01:00
Yukon8220.h rename CFG_ macros to CONFIG_SYS 2008-10-18 21:54:03 +02:00
ZPC1900.h rename CFG_ macros to CONFIG_SYS 2008-10-18 21:54:03 +02:00
ZUMA.h Separate mtdparts command from jffs2 2009-03-20 22:39:14 +01:00
acadia.h NAND: rename NAND_MAX_CHIPS to CONFIG_SYS_NAND_MAX_CHIPS 2009-01-23 10:32:51 -06:00
actux1.h ixp: move serial to drivers/serial 2009-01-31 10:16:02 +01:00
actux2.h ixp: move serial to drivers/serial 2009-01-31 10:16:02 +01:00
actux3.h ixp: move serial to drivers/serial 2009-01-31 10:16:02 +01:00
actux4.h ixp: move serial to drivers/serial 2009-01-31 10:16:02 +01:00
ads5121.h ads5121: enable instruction cache 2009-03-26 10:00:57 +01:00
aev.h rename CFG_ macros to CONFIG_SYS 2008-10-18 21:54:03 +02:00
afeb9260.h at91sam9/at91cap: move nand drivers to drivers/mtd/nand 2009-03-22 13:22:24 +01:00
alpr.h NAND: rename NAND_MAX_CHIPS to CONFIG_SYS_NAND_MAX_CHIPS 2009-01-23 10:32:51 -06:00
amcc-common.h Changed PPC4xx EMAC driver to require CONFIG_PPC4xx_EMAC 2008-11-09 21:38:04 -08:00
ap325rxa.h rename CONFIG_CMD_ENV to CONFIG_CMD_SAVEENV 2009-02-18 00:47:43 +01:00
apollon.h Separate mtdparts command from jffs2 2009-03-20 22:39:14 +01:00
armadillo.h rename CFG_ macros to CONFIG_SYS 2008-10-18 21:54:03 +02:00
assabet.h rename CFG_ macros to CONFIG_SYS 2008-10-18 21:54:03 +02:00
at91cap9adk.h at91sam9/at91cap: move nand drivers to drivers/mtd/nand 2009-03-22 13:22:24 +01:00
at91rm9200dk.h NAND: rename NAND_MAX_CHIPS to CONFIG_SYS_NAND_MAX_CHIPS 2009-01-23 10:32:51 -06:00
at91sam9rlek.h at91sam9/at91cap: move nand drivers to drivers/mtd/nand 2009-03-22 13:22:24 +01:00
at91sam9260ek.h at91: Support for the at91sam9g20 : Atmel 400Mhz ARM 926ej-s SOC. 2009-03-22 14:48:16 +01:00
at91sam9261ek.h at91sam9/at91cap: move nand drivers to drivers/mtd/nand 2009-03-22 13:22:24 +01:00
at91sam9263ek.h at91sam9/at91cap: move nand drivers to drivers/mtd/nand 2009-03-22 13:22:24 +01:00
atc.h rename CFG_ macros to CONFIG_SYS 2008-10-18 21:54:03 +02:00
atngw100.h Merge branch 'fixes' into cleanups 2008-12-17 16:53:07 +01:00
atstk1002.h Merge branch 'fixes' into cleanups 2008-12-17 16:53:07 +01:00
atstk1003.h Merge branch 'fixes' into cleanups 2008-12-17 16:53:07 +01:00
atstk1004.h Merge branch 'fixes' into cleanups 2008-12-17 16:53:07 +01:00
atstk1006.h Merge branch 'fixes' into cleanups 2008-12-17 16:53:07 +01:00
bamboo.h NAND: rename NAND_MAX_CHIPS to CONFIG_SYS_NAND_MAX_CHIPS 2009-01-23 10:32:51 -06:00
barco.h rename CFG_ macros to CONFIG_SYS 2008-10-18 21:54:03 +02:00
bf533-ezkit.h Blackfin: unify common ADI board settings 2009-03-24 20:36:22 -04:00
bf533-stamp.h Blackfin: bf533-stamp: bump up default clocks 2009-03-24 20:36:29 -04:00
bf537-stamp.h Blackfin: bf537-stamp: increase monitor size 2009-03-24 20:36:30 -04:00
bf561-ezkit.h Blackfin: unify common ADI board settings 2009-03-24 20:36:22 -04:00
bfin_adi_common.h Blackfin: add clkin_hz= to default kernel command line for ADI boards 2009-03-24 20:36:29 -04:00
bubinga.h rename CFG_ macros to CONFIG_SYS 2008-10-18 21:54:03 +02:00
c2mon.h rename CFG_ macros to CONFIG_SYS 2008-10-18 21:54:03 +02:00
canmb.h net: removed board-specific CONFIGs from MPC5xxx FEC driver 2009-02-09 23:01:40 -08:00
canyonlands.h NAND: rename NAND_MAX_CHIPS to CONFIG_SYS_NAND_MAX_CHIPS 2009-01-23 10:32:51 -06:00
cerf250.h pxa: fixing get_timer to return time in miliseconds. 2009-02-20 03:24:08 +01:00
cm41xx.h rename CONFIG_CMD_ENV to CONFIG_CMD_SAVEENV 2009-02-18 00:47:43 +01:00
cm4008.h rename CONFIG_CMD_ENV to CONFIG_CMD_SAVEENV 2009-02-18 00:47:43 +01:00
cm5200.h Separate mtdparts command from jffs2 2009-03-20 22:39:14 +01:00
cmc_pu2.h cmc_pu2: get mac address from environment 2009-03-20 22:39:12 +01:00
cmi_mpc5xx.h rename CONFIG_CMD_ENV to CONFIG_CMD_SAVEENV 2009-02-18 00:47:43 +01:00
cobra5272.h rename CFG_ macros to CONFIG_SYS 2008-10-18 21:54:03 +02:00
cogent_common.h * Patch by Shlomo Kut, 29 Mar 2004: 2004-09-29 11:02:56 +00:00
cogent_mpc8xx.h rename CFG_ macros to CONFIG_SYS 2008-10-18 21:54:03 +02:00
cogent_mpc8260.h rename CFG_ macros to CONFIG_SYS 2008-10-18 21:54:03 +02:00
cpci5200.h net: removed board-specific CONFIGs from MPC5xxx FEC driver 2009-02-09 23:01:40 -08:00
cradle.h pxa: fixing get_timer to return time in miliseconds. 2009-02-20 03:24:08 +01:00
csb226.h pxa: fixing get_timer to return time in miliseconds. 2009-02-20 03:24:08 +01:00
csb272.h ppc4xx: Remove CONFIG_SYS_IGNORE_405_UART_ERRATA_59 from config files 2009-01-26 10:40:42 +01:00
csb472.h ppc4xx: Remove CONFIG_SYS_IGNORE_405_UART_ERRATA_59 from config files 2009-01-26 10:40:42 +01:00
csb637.h NAND: rename NAND_MAX_CHIPS to CONFIG_SYS_NAND_MAX_CHIPS 2009-01-23 10:32:51 -06:00
davinci_dvevm.h usb : musb : Enabling USB MSC support for DM6446 (TI DaVinci) platform 2009-01-28 19:57:30 +01:00
davinci_schmoogie.h NAND: rename NAND_MAX_CHIPS to CONFIG_SYS_NAND_MAX_CHIPS 2009-01-23 10:32:51 -06:00
davinci_sffsdr.h NAND: rename NAND_MAX_CHIPS to CONFIG_SYS_NAND_MAX_CHIPS 2009-01-23 10:32:51 -06:00
davinci_sonata.h NAND: rename NAND_MAX_CHIPS to CONFIG_SYS_NAND_MAX_CHIPS 2009-01-23 10:32:51 -06:00
dbau1x00.h rename CONFIG_CMD_ENV to CONFIG_CMD_SAVEENV 2009-02-18 00:47:43 +01:00
debris.h Separate mtdparts command from jffs2 2009-03-20 22:39:14 +01:00
delta.h pxa: move mmc drivers to drivers/mmc 2009-02-20 03:47:50 +01:00
digsy_mtc.h Add support for the digsy MTC board. 2009-03-20 22:39:14 +01:00
dnp1110.h rename CFG_ macros to CONFIG_SYS 2008-10-18 21:54:03 +02:00
eNET.h Rewrite i386 interrupt handling 2009-03-20 22:39:13 +01:00
eXalion.h rename CONFIG_CMD_ENV to CONFIG_CMD_SAVEENV 2009-02-18 00:47:43 +01:00
ebony.h rename CFG_ macros to CONFIG_SYS 2008-10-18 21:54:03 +02:00
ep82xxm.h rename CFG_ macros to CONFIG_SYS 2008-10-18 21:54:03 +02:00
ep7312.h Separate mtdparts command from jffs2 2009-03-20 22:39:14 +01:00
ep8248.h rename CFG_ macros to CONFIG_SYS 2008-10-18 21:54:03 +02:00
ep8260.h Separate mtdparts command from jffs2 2009-03-20 22:39:14 +01:00
evb4510.h rename CFG_ macros to CONFIG_SYS 2008-10-18 21:54:03 +02:00
favr-32-ezkit.h Merge branch 'fixes' into cleanups 2008-12-17 16:53:07 +01:00
fx12mm.h Separate mtdparts command from jffs2 2009-03-20 22:39:14 +01:00
gcplus.h rename CFG_ macros to CONFIG_SYS 2008-10-18 21:54:03 +02:00
gdppc440etx.h ppc4xx: Add GDsys PowerPC 440 ETX board support. 2009-01-26 10:13:30 +01:00
gr_cpci_ax2000.h rename CFG_ macros to CONFIG_SYS 2008-10-18 21:54:03 +02:00
gr_ep2s60.h rename CFG_ macros to CONFIG_SYS 2008-10-18 21:54:03 +02:00
gr_xc3s_1500.h rename CFG_ macros to CONFIG_SYS 2008-10-18 21:54:03 +02:00
grsim.h rename CFG_ macros to CONFIG_SYS 2008-10-18 21:54:03 +02:00
grsim_leon2.h rename CFG_ macros to CONFIG_SYS 2008-10-18 21:54:03 +02:00
gth2.h rename CONFIG_CMD_ENV to CONFIG_CMD_SAVEENV 2009-02-18 00:47:43 +01:00
gw8260.h rename CFG_ macros to CONFIG_SYS 2008-10-18 21:54:03 +02:00
h2_p2_dbg_board.h * Code cleanup (ARM mostly) 2004-07-01 16:30:44 +00:00
hammerhead.h Merge branch 'fixes' into cleanups 2008-12-17 16:53:07 +01:00
hcu4.h ppc4xx: Update configs for Netstal boards 2008-10-21 17:34:57 +02:00
hcu5.h ppc4xx: Update configs for Netstal boards 2008-10-21 17:34:57 +02:00
hermes.h rename CFG_ macros to CONFIG_SYS 2008-10-18 21:54:03 +02:00
hmi1001.h net: removed board-specific CONFIGs from MPC5xxx FEC driver 2009-02-09 23:01:40 -08:00
hymod.h Separate mtdparts command from jffs2 2009-03-20 22:39:14 +01:00
idmr.h Separate mtdparts command from jffs2 2009-03-20 22:39:14 +01:00
impa7.h Separate mtdparts command from jffs2 2009-03-20 22:39:14 +01:00
imx31_litekit.h Separate mtdparts command from jffs2 2009-03-20 22:39:14 +01:00
imx31_phycore.h Separate mtdparts command from jffs2 2009-03-20 22:39:14 +01:00
incaip.h Separate mtdparts command from jffs2 2009-03-20 22:39:14 +01:00
inka4x0.h inka4x0: Add hardware diagnosis and RTC in configuration. 2009-03-30 09:41:58 +02:00
innokom.h Separate mtdparts command from jffs2 2009-03-20 22:39:14 +01:00
integratorap.h rename CFG_ macros to CONFIG_SYS 2008-10-18 21:54:03 +02:00
integratorcp.h rename CONFIG_CMD_ENV to CONFIG_CMD_SAVEENV 2009-02-18 00:47:43 +01:00
ixdp425.h ixp: move serial to drivers/serial 2009-01-31 10:16:02 +01:00
ixdpg425.h ixp: move serial to drivers/serial 2009-01-31 10:16:02 +01:00
jupiter.h net: removed board-specific CONFIGs from MPC5xxx FEC driver 2009-02-09 23:01:40 -08:00
katmai.h ppc4xx: Fix problem with CONFIG_MAX_MEM_MAPPED in include/asm-ppc/config.h 2009-02-12 06:08:07 +01:00
kb9202.h at91rm9200: fix broken boot from nor flash 2008-11-24 22:10:04 +01:00
keymile-common.h powerpc: common updates for keymile boards 2009-03-18 20:49:04 +01:00
kilauea.h ppc4xx: Autocalibration can set RDCC to over aggressive value. 2009-02-12 06:08:07 +01:00
km8xx.h 8xx: add support for new keymile kmsupx4 board. 2009-03-18 20:50:05 +01:00
kmeter1.h powerpc: common updates for keymile boards 2009-03-18 20:49:04 +01:00
kmsupx4.h 8xx: add support for new keymile kmsupx4 board. 2009-03-18 20:50:05 +01:00
korat.h ppc4xx: Clean up configuration file for Korat board 2009-01-29 10:56:10 +01:00
kvme080.h rename CFG_ macros to CONFIG_SYS 2008-10-18 21:54:03 +02:00
lart.h rename CFG_ macros to CONFIG_SYS 2008-10-18 21:54:03 +02:00
linkstation.h rename CFG_ macros to CONFIG_SYS 2008-10-18 21:54:03 +02:00
logodl.h pxa: fixing get_timer to return time in miliseconds. 2009-02-20 03:24:08 +01:00
lpc2292sodimm.h rename CFG_ macros to CONFIG_SYS 2008-10-18 21:54:03 +02:00
lpd7a400-10.h rename CFG_ macros to CONFIG_SYS 2008-10-18 21:54:03 +02:00
lpd7a400.h rename CFG_ macros to CONFIG_SYS 2008-10-18 21:54:03 +02:00
lpd7a404-10.h rename CFG_ macros to CONFIG_SYS 2008-10-18 21:54:03 +02:00
lpd7a404.h rename CFG_ macros to CONFIG_SYS 2008-10-18 21:54:03 +02:00
luan.h rename CFG_ macros to CONFIG_SYS 2008-10-18 21:54:03 +02:00
lubbock.h pxa: move mmc drivers to drivers/mmc 2009-02-20 03:47:50 +01:00
lwmon.h rename CFG_ macros to CONFIG_SYS 2008-10-18 21:54:03 +02:00
lwmon5.h Changed PPC4xx EMAC driver to require CONFIG_PPC4xx_EMAC 2008-11-09 21:38:04 -08:00
m501sk.h rename CONFIG_CMD_ENV to CONFIG_CMD_SAVEENV 2009-02-18 00:47:43 +01:00
makalu.h rename CFG_ macros to CONFIG_SYS 2008-10-18 21:54:03 +02:00
mcc200.h net: removed board-specific CONFIGs from MPC5xxx FEC driver 2009-02-09 23:01:40 -08:00
mcu25.h ppc4xx: Update configs for Netstal boards 2008-10-21 17:34:57 +02:00
mecp5200.h net: removed board-specific CONFIGs from MPC5xxx FEC driver 2009-02-09 23:01:40 -08:00
mgcoge.h powerpc: common updates for keymile boards 2009-03-18 20:49:04 +01:00
mgsuvd.h 8xx, mgsuvd: rename board to a more generic name 2009-03-18 20:50:04 +01:00
microblaze-generic.h Separate mtdparts command from jffs2 2009-03-20 22:39:14 +01:00
mimc200.h Merge branch 'mimc200' into next 2009-02-23 10:34:39 +01:00
ml300.h rename CFG_ macros to CONFIG_SYS 2008-10-18 21:54:03 +02:00
ml507.h ppc4xx: Merge xilinx-ppc440 and xilinx-ppc405 cfg 2008-10-31 10:31:02 +01:00
modnet50.h Separate mtdparts command from jffs2 2009-03-20 22:39:14 +01:00
motionpro.h Separate mtdparts command from jffs2 2009-03-20 22:39:14 +01:00
mp2usb.h usb.h: use standard __LITTLE_ENDIAN from Linux headers 2009-01-28 19:57:29 +01:00
mpc7448hpc2.h rename CONFIG_CMD_ENV to CONFIG_CMD_SAVEENV 2009-02-18 00:47:43 +01:00
mpr2.h rename CONFIG_CMD_ENV to CONFIG_CMD_SAVEENV 2009-02-18 00:47:43 +01:00
ms7720se.h rename CONFIG_CMD_ENV to CONFIG_CMD_SAVEENV 2009-02-18 00:47:43 +01:00
ms7722se.h rename CONFIG_CMD_ENV to CONFIG_CMD_SAVEENV 2009-02-18 00:47:43 +01:00
ms7750se.h rename CONFIG_CMD_ENV to CONFIG_CMD_SAVEENV 2009-02-18 00:47:43 +01:00
muas3001.h rename CFG_ macros to CONFIG_SYS 2008-10-18 21:54:03 +02:00
mucmc52.h net: removed board-specific CONFIGs from MPC5xxx FEC driver 2009-02-09 23:01:40 -08:00
munices.h net: removed board-specific CONFIGs from MPC5xxx FEC driver 2009-02-09 23:01:40 -08:00
mx1ads.h rename CFG_ macros to CONFIG_SYS 2008-10-18 21:54:03 +02:00
mx1fs2.h Separate mtdparts command from jffs2 2009-03-20 22:39:14 +01:00
mx31ads.h Separate mtdparts command from jffs2 2009-03-20 22:39:14 +01:00
neo.h ppc4xx: Add GDSys neo 405EP board support 2008-10-21 17:35:02 +02:00
netstal-common.h Use new CONFIG_SYS_VXWORKS parameters for Netstal boards 2008-12-07 00:19:04 +01:00
netstar.h Separate mtdparts command from jffs2 2009-03-20 22:39:14 +01:00
nmdk8815.h nmdk8815: fix onenand support 2009-02-22 18:28:45 +01:00
ns9750dev.h rename CFG_ macros to CONFIG_SYS 2008-10-18 21:54:03 +02:00
o2dnt.h net: removed board-specific CONFIGs from MPC5xxx FEC driver 2009-02-09 23:01:40 -08:00
ocotea.h rename CFG_ macros to CONFIG_SYS 2008-10-18 21:54:03 +02:00
omap3_beagle.h OMAP3:Beagle: Enable mtdparts 2009-03-25 22:13:56 +01:00
omap3_evm.h OMAP3: Add EVM board 2009-01-28 21:39:58 +01:00
omap3_overo.h OMAP3: Add Overo board 2009-01-28 21:39:57 +01:00
omap3_pandora.h OMAP3: Add Pandora support 2009-01-28 21:39:58 +01:00
omap3_zoom1.h ARM:OMAP3:Zoom1: Add nand unlock option 2009-02-06 23:07:33 +01:00
omap730.h ARM OMAP : Correct Invalid Timer Register Field Declaration in omap1510.h & omap730.h 2008-09-12 02:20:40 +02:00
omap730p2.h rename CFG_ macros to CONFIG_SYS 2008-10-18 21:54:03 +02:00
omap1510.h ARM OMAP : Correct Invalid Timer Register Field Declaration in omap1510.h & omap730.h 2008-09-12 02:20:40 +02:00
omap1510inn.h rename CFG_ macros to CONFIG_SYS 2008-10-18 21:54:03 +02:00
omap1610h2.h rename CFG_ macros to CONFIG_SYS 2008-10-18 21:54:03 +02:00
omap1610inn.h rename CFG_ macros to CONFIG_SYS 2008-10-18 21:54:03 +02:00
omap2420h4.h Separate mtdparts command from jffs2 2009-03-20 22:39:14 +01:00
omap5912osk.h rename CFG_ macros to CONFIG_SYS 2008-10-18 21:54:03 +02:00
p3mx.h rename CFG_ macros to CONFIG_SYS 2008-10-18 21:54:03 +02:00
p3p440.h Changed PPC4xx EMAC driver to require CONFIG_PPC4xx_EMAC 2008-11-09 21:38:04 -08:00
pb1x00.h rename CONFIG_CMD_ENV to CONFIG_CMD_SAVEENV 2009-02-18 00:47:43 +01:00
pcs440ep.h Changed PPC4xx EMAC driver to require CONFIG_PPC4xx_EMAC 2008-11-09 21:38:04 -08:00
pcu_e.h 8xx, icache: enabling ICache not before running from RAM 2009-03-18 20:48:29 +01:00
pdnb3.h ixp: move serial to drivers/serial 2009-01-31 10:16:02 +01:00
pf5200.h net: removed board-specific CONFIGs from MPC5xxx FEC driver 2009-02-09 23:01:40 -08:00
pleb2.h pxa: move mmc drivers to drivers/mmc 2009-02-20 03:47:50 +01:00
ppmc7xx.h rename CONFIG_CMD_ENV to CONFIG_CMD_SAVEENV 2009-02-18 00:47:43 +01:00
ppmc8260.h rename CFG_ macros to CONFIG_SYS 2008-10-18 21:54:03 +02:00
purple.h rename CFG_ macros to CONFIG_SYS 2008-10-18 21:54:03 +02:00
pxa255_idp.h pxa: move mmc drivers to drivers/mmc 2009-02-20 03:47:50 +01:00
qemu-mips.h MIPS: qemu_mips: move env storage just after u-boot 2008-12-17 22:27:27 +09:00
qong.h Separate mtdparts command from jffs2 2009-03-20 22:39:14 +01:00
quad100hd.h NAND: rename NAND_MAX_CHIPS to CONFIG_SYS_NAND_MAX_CHIPS 2009-01-23 10:32:51 -06:00
quantum.h rename CFG_ macros to CONFIG_SYS 2008-10-18 21:54:03 +02:00
r2dplus.h sh: Fix cannot work rtl8139 on r2dplus 2009-03-12 23:58:30 +09:00
r7780mp.h sh: Add some register value configurable to PCI of SH7780 2009-03-12 23:58:30 +09:00
redwood.h rename CFG_ macros to CONFIG_SYS 2008-10-18 21:54:03 +02:00
rmu.h rename CFG_ macros to CONFIG_SYS 2008-10-18 21:54:03 +02:00
rsdproto.h rename CFG_ macros to CONFIG_SYS 2008-10-18 21:54:03 +02:00
rsk7203.h rename CONFIG_CMD_ENV to CONFIG_CMD_SAVEENV 2009-02-18 00:47:43 +01:00
sacsng.h rename CFG_ macros to CONFIG_SYS 2008-10-18 21:54:03 +02:00
sbc405.h ppc4xx: Remove CONFIG_SYS_IGNORE_405_UART_ERRATA_59 from config files 2009-01-26 10:40:42 +01:00
sbc2410x.h NAND: rename NAND_MAX_CHIPS to CONFIG_SYS_NAND_MAX_CHIPS 2009-01-23 10:32:51 -06:00
sbc8240.h rename CONFIG_CMD_ENV to CONFIG_CMD_SAVEENV 2009-02-18 00:47:43 +01:00
sbc8260.h rename CFG_ macros to CONFIG_SYS 2008-10-18 21:54:03 +02:00
sbc8349.h 83xx: Use common LSDMR defines from asm/fsl_lbc.h 2009-03-30 13:33:49 -05:00
sbc8548.h 85xx: Use common LSDMR defines from asm/fsl_lbc.h 2009-03-30 13:33:49 -05:00
sbc8560.h rename CONFIG_CMD_ENV to CONFIG_CMD_SAVEENV 2009-02-18 00:47:43 +01:00
sbc8641d.h sbc8641d: Fix PCI mapping concepts 2009-01-13 15:27:45 -06:00
sc3.h Separate mtdparts command from jffs2 2009-03-20 22:39:14 +01:00
sc520_cdp.h Separate mtdparts command from jffs2 2009-03-20 22:39:14 +01:00
sc520_spunk.h Separate mtdparts command from jffs2 2009-03-20 22:39:14 +01:00
sc520_spunk_rel.h * Code cleanup: 2003-06-27 21:31:46 +00:00
scb9328.h rename CFG_ macros to CONFIG_SYS 2008-10-18 21:54:03 +02:00
sequoia.h NAND: rename NAND_MAX_CHIPS to CONFIG_SYS_NAND_MAX_CHIPS 2009-01-23 10:32:51 -06:00
sh7763rdp.h rename CONFIG_CMD_ENV to CONFIG_CMD_SAVEENV 2009-02-18 00:47:43 +01:00
sh7785lcr.h sh: Add support 32-Bit Extended Address Mode to sh7785lcr 2009-03-12 23:58:30 +09:00
shannon.h rename CFG_ macros to CONFIG_SYS 2008-10-18 21:54:03 +02:00
smdk2400.h rename CFG_ macros to CONFIG_SYS 2008-10-18 21:54:03 +02:00
smdk2410.h rename CFG_ macros to CONFIG_SYS 2008-10-18 21:54:03 +02:00
smdk6400.h rename CONFIG_CMD_ENV to CONFIG_CMD_SAVEENV 2009-02-18 00:47:43 +01:00
smmaco4.h Separate mtdparts command from jffs2 2009-03-20 22:39:14 +01:00
socrates.h NAND: rename NAND_MAX_CHIPS to CONFIG_SYS_NAND_MAX_CHIPS 2009-01-23 10:32:51 -06:00
sorcery.h rename CFG_ macros to CONFIG_SYS 2008-10-18 21:54:03 +02:00
spc1920.h rename CFG_ macros to CONFIG_SYS 2008-10-18 21:54:03 +02:00
spieval.h rename CFG_ macros to CONFIG_SYS 2008-10-18 21:54:03 +02:00
stxgp3.h rename CONFIG_CMD_ENV to CONFIG_CMD_SAVEENV 2009-02-18 00:47:43 +01:00
stxssa.h rename CONFIG_CMD_ENV to CONFIG_CMD_SAVEENV 2009-02-18 00:47:43 +01:00
stxxtc.h NAND: rename NAND_MAX_CHIPS to CONFIG_SYS_NAND_MAX_CHIPS 2009-01-23 10:32:51 -06:00
suzaku.h rename CONFIG_CMD_ENV to CONFIG_CMD_SAVEENV 2009-02-18 00:47:43 +01:00
svm_sc8xx.h rename CFG_ macros to CONFIG_SYS 2008-10-18 21:54:03 +02:00
taihu.h rename CFG_ macros to CONFIG_SYS 2008-10-18 21:54:03 +02:00
taishan.h rename CFG_ macros to CONFIG_SYS 2008-10-18 21:54:03 +02:00
tb0229.h rename CFG_ macros to CONFIG_SYS 2008-10-18 21:54:03 +02:00
trab.h Separate mtdparts command from jffs2 2009-03-20 22:39:14 +01:00
trizepsiv.h pxa: move mmc drivers to drivers/mmc 2009-02-20 03:47:50 +01:00
uc100.h rename CFG_ macros to CONFIG_SYS 2008-10-18 21:54:03 +02:00
uc101.h net: removed board-specific CONFIGs from MPC5xxx FEC driver 2009-02-09 23:01:40 -08:00
utx8245.h rename CONFIG_CMD_ENV to CONFIG_CMD_SAVEENV 2009-02-18 00:47:43 +01:00
v5fx30teval.h rename CFG_ macros to CONFIG_SYS 2008-10-18 21:54:03 +02:00
v37.h Separate mtdparts command from jffs2 2009-03-20 22:39:14 +01:00
v38b.h boards: move board_get_enetaddr() into board-specific init 2009-03-20 22:39:12 +01:00
vct.h Separate mtdparts command from jffs2 2009-03-20 22:39:14 +01:00
versatile.h rename CONFIG_CMD_ENV to CONFIG_CMD_SAVEENV 2009-02-18 00:47:43 +01:00
virtlab2.h Separate mtdparts command from jffs2 2009-03-20 22:39:14 +01:00
voiceblue.h Separate mtdparts command from jffs2 2009-03-20 22:39:14 +01:00
walnut.h rename CFG_ macros to CONFIG_SYS 2008-10-18 21:54:03 +02:00
wepep250.h pxa: fixing get_timer to return time in miliseconds. 2009-02-20 03:24:08 +01:00
xaeniax.h pxa: fixing get_timer to return time in miliseconds. 2009-02-20 03:24:08 +01:00
xilinx-ppc.h Separate mtdparts command from jffs2 2009-03-20 22:39:14 +01:00
xilinx-ppc405-generic.h ppc4xx: Generic architecture for xilinx ppc405(v3) 2008-10-24 17:26:09 +02:00
xilinx-ppc405.h ppc4xx: Merge xilinx-ppc440 and xilinx-ppc405 cfg 2008-10-31 10:31:02 +01:00
xilinx-ppc440-generic.h rename CFG_ macros to CONFIG_SYS 2008-10-18 21:54:03 +02:00
xilinx-ppc440.h ppc4xx: Merge xilinx-ppc440 and xilinx-ppc405 cfg 2008-10-31 10:31:02 +01:00
xm250.h pxa: fixing get_timer to return time in miliseconds. 2009-02-20 03:24:08 +01:00
xsengine.h Separate mtdparts command from jffs2 2009-03-20 22:39:14 +01:00
yosemite.h rename CFG_ macros to CONFIG_SYS 2008-10-18 21:54:03 +02:00
yucca.h rename CFG_ macros to CONFIG_SYS 2008-10-18 21:54:03 +02:00
zeus.h Changed PPC4xx EMAC driver to require CONFIG_PPC4xx_EMAC 2008-11-09 21:38:04 -08:00
zylonite.h pxa: move mmc drivers to drivers/mmc 2009-02-20 03:47:50 +01:00