u-boot/board/modnet50/flash.c
wdenk cd0a9de68b * Patch by Laurent Mohin, 10 Feb 2004:
Fix buffer overflow in common/usb.c

* Patch by Tolunay Orkun, 10 Feb 2004:
  Add support for Cogent CSB272 board

* Code cleanup
2004-02-23 20:48:38 +00:00

537 lines
14 KiB
C

/*
* (C) Copyright 2002
* MAZeT GmbH <www.mazet.de>
* Stephan Linz <linz@mazet.de>, <linz@li-pro.net>
*
* The most stuff comes from PPCBoot and Linux.
*
* IMMS gGmbH <www.imms.de>
* Thomas Elste <info@elste.org>
*
* Modifications for ModNET50 Board
*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
#include <common.h>
#include <asm/arch/netarm_registers.h>
#define SCR (*(volatile unsigned int *)(NETARM_GEN_MODULE_BASE + NETARM_GEN_SYSTEM_CONTROL))
#define ALIGN_ABORT_OFF SCR = SCR & ~NETARM_GEN_SYS_CFG_ALIGN_ABORT
#define ALIGN_ABORT_ON SCR = SCR | NETARM_GEN_SYS_CFG_ALIGN_ABORT
#define PROG_ADDR (0x555*2)
#define SETUP_ADDR (0x555*2)
#define ID_ADDR (0x555*2)
#define UNLOCK_ADDR1 (0x555*2)
#define UNLOCK_ADDR2 (0x2AA*2)
#define UNLOCK_CMD1 (0xAA)
#define UNLOCK_CMD2 (0x55)
#define ERASE_SUSPEND_CMD (0xB0)
#define ERASE_RESUME_CMD (0x30)
#define RESET_CMD (0xF0)
#define ID_CMD (0x90)
#define SECERASE_CMD (0x30)
#define CHIPERASE_CMD (0x10)
#define PROG_CMD (0xa0)
#define SETUP_CMD (0x80)
#define DQ2 (0x04)
#define DQ3 (DQ2*2)
#define DQ5 (DQ3*4)
#define DQ6 (DQ5*2)
#define WRITE_UNLOCK(addr) { \
*(volatile __u16*)(addr + UNLOCK_ADDR1) = (__u16)UNLOCK_CMD1; \
*(volatile __u16*)(addr + UNLOCK_ADDR2) = (__u16)UNLOCK_CMD2; \
}
#define CONFIG_AM29_RESERVED (0)
#define K (1024)
#define MB (4)
#define CELL_SIZE (64*K)
#define DEVICE_SIZE (MB*K*K)
#define CELLS_PER_DEVICE (DEVICE_SIZE/CELL_SIZE)
#define RESERVED_CELLS (CONFIG_AM29_RESERVED*K)/CELL_SIZE
#define MAX_FLASH_DEVICES (1)
#define AVAIL_SIZE (DEVICE_SIZE*MAX_FLASH_DEVICES - RESERVED_CELLS*CELL_SIZE)
flash_info_t flash_info[CFG_MAX_FLASH_BANKS];
static __u16 toggling_bits;
/*-----------------------------------------------------------------------
*/
ulong flash_get_size (ulong baseaddr, flash_info_t * info)
{
short i;
__u16 flashtest;
/* Write auto select command sequence and test FLASH answer */
WRITE_UNLOCK (baseaddr);
*(volatile __u16 *) (baseaddr + ID_ADDR) = (__u16) ID_CMD;
flashtest /* manufacturer ID */ = *(volatile __u16 *) (baseaddr);
*(volatile __u16 *) (baseaddr + ID_ADDR) = (__u16) RESET_CMD;
switch ((__u32) ((flashtest << 16) + flashtest)) {
case AMD_MANUFACT:
info->flash_id = FLASH_MAN_AMD & FLASH_VENDMASK;
break;
case FUJ_MANUFACT:
info->flash_id = FLASH_MAN_FUJ & FLASH_VENDMASK;
break;
default:
info->flash_id = FLASH_UNKNOWN;
info->sector_count = 0;
info->size = 0;
return (0); /* no or unknown flash */
}
/* Write auto select command sequence and test FLASH answer */
WRITE_UNLOCK (baseaddr);
*(volatile __u16 *) (baseaddr + ID_ADDR) = (__u16) ID_CMD;
flashtest /* device ID */ = *(volatile __u16 *) (baseaddr + 2);
*(volatile __u16 *) (baseaddr + ID_ADDR) = (__u16) RESET_CMD;
/* toggling_bits = (flashtest == TOSHIBA)?(DQ6):(DQ2|DQ6); */
toggling_bits = (DQ2 | DQ6);
switch ((__u32) ((flashtest << 16) + flashtest)) {
case AMD_ID_LV160B:
info->flash_id +=
(FLASH_AM160LV | FLASH_AM160B) & FLASH_TYPEMASK;
info->sector_count = CFG_MAX_FLASH_SECT;
info->size = CFG_FLASH_SIZE;
/* 1*16K Boot Block
2*8K Parameter Block
1*32K Small Main Block */
info->start[0] = baseaddr;
info->start[1] = baseaddr + 0x4000;
info->start[2] = baseaddr + 0x6000;
info->start[3] = baseaddr + 0x8000;
for (i = 1; i < info->sector_count; i++)
info->start[3 + i] = baseaddr + i * CFG_MAIN_SECT_SIZE;
break;
default:
info->flash_id = FLASH_UNKNOWN;
return (0); /* no or unknown flash */
}
for (i = 0; i < info->sector_count; i++) {
/* Write auto select command sequence and test FLASH answer */
WRITE_UNLOCK (info->start[i]);
*(volatile __u16 *) (info->start[i] + ID_ADDR) = (__u16) ID_CMD;
flashtest /* protected verify */ = *(volatile __u16 *) (info->start[i] + 4);
*(volatile __u16 *) (info->start[i] + ID_ADDR) = (__u16) RESET_CMD;
if (flashtest & 0x0001) {
info->protect[i] = 1; /* D0 = 1 if protected */
} else {
info->protect[i] = 0;
}
}
return (info->size);
}
/*-----------------------------------------------------------------------
*/
ulong flash_init (void)
{
ulong size = 0;
int i;
/* Init: no FLASHes known */
for (i = 0; i < CFG_MAX_FLASH_BANKS; ++i) {
flash_info[i].flash_id = FLASH_UNKNOWN;
}
/* Static FLASH Bank configuration here (only one bank) */
size = flash_get_size (CFG_FLASH_BASE, &flash_info[0]);
if (flash_info[0].flash_id == FLASH_UNKNOWN || size == 0) {
printf ("## Unknown FLASH on Bank 0 - Size = 0x%08lx = %ld MB\n",
size, size >> 20);
}
/*
* protect monitor and environment sectors
*/
flash_protect (FLAG_PROTECT_SET,
CFG_FLASH_BASE,
CFG_FLASH_BASE + monitor_flash_len - 1,
&flash_info[0]);
flash_protect (FLAG_PROTECT_SET,
CFG_ENV_ADDR,
CFG_ENV_ADDR + CFG_ENV_SIZE - 1, &flash_info[0]);
return size;
}
/*-----------------------------------------------------------------------
*/
void flash_print_info (flash_info_t * info)
{
int i;
if (info->flash_id == FLASH_UNKNOWN) {
printf ("missing or unknown FLASH type\n");
return;
}
switch (info->flash_id & FLASH_VENDMASK) {
case FLASH_MAN_AMD:
printf ("AMD ");
break;
case FLASH_MAN_FUJ:
printf ("Fujitsu ");
break;
default:
printf ("Unknown Vendor ");
break;
}
switch (info->flash_id & FLASH_TYPEMASK) {
case FLASH_AMDL323B:
printf ("29DL323B (32 M, bottom sector)\n");
break;
case (FLASH_AM160LV | FLASH_AM160B):
printf ("29LV160BE (1M x 16, bottom sector)\n");
break;
default:
printf ("Unknown Chip Type\n");
break;
}
printf (" Size: %ld MB in %d Sectors\n",
info->size >> 20, info->sector_count);
printf (" Sector Start Addresses:");
for (i = 0; i < info->sector_count; i++) {
if ((i % 4) == 0)
printf ("\n ");
printf (" S%02d @ 0x%08lX%s", i,
info->start[i], info->protect[i] ? " !" : " ");
}
printf ("\n");
return;
}
/*-----------------------------------------------------------------------
*/
int flash_check_protection (flash_info_t * info, int s_first, int s_last)
{
int sect, prot = 0;
for (sect = s_first; sect <= s_last; sect++)
if (info->protect[sect])
prot++;
if (prot)
printf ("- can't erase %d protected sectors\n", prot);
return prot;
}
/*-----------------------------------------------------------------------
*/
int flash_check_erase_amd (ulong start)
{
__u16 v1, v2;
v1 = *(volatile __u16 *) (start);
v2 = *(volatile __u16 *) (start);
if (((v1 ^ v2) & toggling_bits) == toggling_bits) {
if (((v1 | v2) & DQ5) == DQ5) {
printf ("[DQ5] ");
/* OOPS: exceeded timing limits */
v1 = *(volatile __u16 *) (start);
v2 = *(volatile __u16 *) (start);
if (((v1 ^ v2) & toggling_bits) == toggling_bits) {
printf ("[%s] ",
((toggling_bits & (DQ2 | DQ6)) ==
(DQ2 | DQ6)) ? "DQ2,DQ6" : "DQ6");
/* OOPS: there is an erasure in progress,
* try to reset chip */
*(volatile __u16 *) (start) =
(__u16) RESET_CMD;
return 1; /* still busy */
}
}
return 1; /* still busy */
}
return 0; /* be free */
}
/*-----------------------------------------------------------------------
*/
int flash_erase (flash_info_t * info, int s_first, int s_last)
{
int flag, sect, setup_offset = 0;
int rc = ERR_OK;
if (info->flash_id == FLASH_UNKNOWN) {
printf ("- missing\n");
return ERR_UNKNOWN_FLASH_TYPE;
}
if ((s_first < 0) || (s_first > s_last)) {
printf ("- no sectors to erase\n");
return ERR_INVAL;
}
if (flash_check_protection (info, s_first, s_last))
return ERR_PROTECTED;
switch (info->flash_id & FLASH_VENDMASK) {
case FLASH_MAN_FUJ:
case FLASH_MAN_AMD:
switch (info->flash_id & FLASH_TYPEMASK) {
case (FLASH_AM160LV | FLASH_AM160B):
setup_offset = UNLOCK_ADDR1; /* just the adress for setup_cmd differs */
case FLASH_AMDL323B:
/*
* Disable interrupts which might cause a timeout
* here. Remember that our exception vectors are
* at address 0 in the flash, and we don't want a
* (ticker) exception to happen while the flash
* chip is in programming mode.
*/
flag = disable_interrupts ();
/* Start erase on unprotected sectors */
for (sect = s_first; sect <= s_last && !ctrlc ();
sect++) {
printf ("Erasing sector %2d ... ", sect);
if (info->protect[sect] == 0) {
/* not protected */
/* Write sector erase command sequence */
WRITE_UNLOCK (info->start[0]);
*(volatile __u16 *) (info->start[0] +
setup_offset) =
(__u16) SETUP_CMD;
WRITE_UNLOCK (info->start[0]);
*(volatile __u16 *) (info->
start[sect]) =
(__u16) SECERASE_CMD;
/* wait some time */
reset_timer_masked ();
while (get_timer_masked () < 1000) {
}
/* arm simple, non interrupt dependent timer */
reset_timer_masked ();
while (flash_check_erase_amd (info->start[sect])) {
if (get_timer_masked () > CFG_FLASH_ERASE_TOUT) {
printf ("timeout!\n");
/* OOPS: reach timeout,
* try to reset chip
*/
*(volatile __u16 *) (info-> start[sect]) = (__u16) RESET_CMD;
rc = ERR_TIMOUT;
goto outahere_323B;
}
}
printf ("ok.\n");
} else {
printf ("protected!\n");
}
}
if (ctrlc ())
printf ("User Interrupt!\n");
outahere_323B:
/* allow flash to settle - wait 10 ms */
udelay_masked (10000);
if (flag)
enable_interrupts ();
return rc;
default:
printf ("- unknown chip type\n");
return ERR_UNKNOWN_FLASH_TYPE;
}
break;
default:
printf ("- unknown vendor ");
return ERR_UNKNOWN_FLASH_VENDOR;
}
}
/*-----------------------------------------------------------------------
*/
int flash_check_write_amd (ulong dest)
{
__u16 v1, v2;
v1 = *(volatile __u16 *) (dest);
v2 = *(volatile __u16 *) (dest);
/* DQ6 toggles during write */
if (((v1 ^ v2) & DQ6) == DQ6) {
if (((v1 | v2) & DQ5) == DQ5) {
printf ("[DQ5] @ %08lX\n", dest);
/* OOPS: exceeded timing limits,
* try to reset chip */
*(volatile __u16 *) (dest) = (__u16) RESET_CMD;
return 0; /* be free */
}
return 1; /* still busy */
}
return 0; /* be free */
}
/*-----------------------------------------------------------------------
* Copy memory to flash
*/
static int write_word (flash_info_t * info, ulong dest, ushort data)
{
int rc = ERR_OK;
int flag;
/* Check if Flash is (sufficiently) erased */
if ((*(__u16 *) (dest) & data) != data)
return ERR_NOT_ERASED;
/*
* Disable interrupts which might cause a timeout
* here. Remember that our exception vectors are
* at address 0 in the flash, and we don't want a
* (ticker) exception to happen while the flash
* chip is in programming mode.
*/
flag = disable_interrupts ();
/* Write program command sequence */
WRITE_UNLOCK (info->start[0]);
/* Flash dependend program seqence */
switch (info->flash_id & FLASH_VENDMASK) {
case FLASH_MAN_FUJ:
case FLASH_MAN_AMD:
switch (info->flash_id & FLASH_TYPEMASK) {
case (FLASH_AM160LV | FLASH_AM160B):
*(volatile __u16 *) (info->start[0] + UNLOCK_ADDR1) =
(__u16) PROG_CMD;
*(volatile __u16 *) (dest) = (__u16) data;
break;
case FLASH_AMDL323B:
*(volatile __u16 *) (dest) = (__u16) PROG_CMD;
*(volatile __u16 *) (dest) = (__u16) data;
break;
}
}
/* arm simple, non interrupt dependent timer */
reset_timer_masked ();
while (flash_check_write_amd (dest)) {
if (get_timer_masked () > CFG_FLASH_WRITE_TOUT) {
printf ("timeout! @ %08lX\n", dest);
/* OOPS: reach timeout,
* try to reset chip */
*(volatile __u16 *) (dest) = (__u16) RESET_CMD;
rc = ERR_TIMOUT;
goto outahere_323B;
}
}
/* Check if Flash was (accurately) written */
if (*(__u16 *) (dest) != data)
rc = ERR_PROG_ERROR;
outahere_323B:
if (flag)
enable_interrupts ();
return rc;
}
/*-----------------------------------------------------------------------
* Copy memory to flash.
*/
int write_buff (flash_info_t * info, uchar * src, ulong addr, ulong cnt)
{
ulong cp, wp;
ushort data;
int l;
int i, rc;
wp = (addr & ~1); /* get lower word aligned address */
/*
* handle unaligned start bytes
*/
if ((l = addr - wp) != 0) {
data = 0;
for (i = 0, cp = wp; i < l; ++i, ++cp) {
data = (data >> 8) | (*(uchar *) cp << 8);
}
for (; i < 2 && cnt > 0; ++i) {
data = (data >> 8) | (*src++ << 8);
--cnt;
++cp;
}
for (; cnt == 0 && i < 2; ++i, ++cp) {
data = (data >> 8) | (*(uchar *) cp << 8);
}
if ((rc = write_word (info, wp, data)) != 0) {
return (rc);
}
wp += 2;
}
/*
* handle word aligned part
*/
while (cnt >= 2) {
data = *((ushort *) src);
if ((rc = write_word (info, wp, data)) != 0)
return (rc);
src += 2;
wp += 2;
cnt -= 2;
}
if (cnt == 0)
return ERR_OK;
/*
* handle unaligned tail bytes
*/
data = 0;
for (i = 0, cp = wp; i < 2 && cnt > 0; ++i, ++cp) {
data = (data >> 8) | (*src++ << 8);
--cnt;
}
for (; i < 2; ++i, ++cp) {
data = (data >> 8) | (*(uchar *) cp << 8);
}
return write_word (info, wp, data);
}