RFC compliant uri and display-name encode/decode
1. URI Encoding
This patch changes ast_uri_encode()'s behavior when doreserved is enabled.
Previously when doreserved was enabled only a small set of reserved
characters were encoded. This set was comprised primarily of the reserved
characters defined in RFC3261 section 25.1, but contained other characters as
well. Rather than only escaping the reserved set, doreserved now escapes
all characters not within the unreserved set as defined by RFC 3261 and
RFC 2396. Also, the 'doreserved' variable has been renamed to 'do_special_char'
in attempts to avoid confusion.
When doreserve is not enabled, the previous logic of only encoding the
characters <= 0X1F and > 0X7f remains, except for the '%' character, which
must always be encoded as it signifies a HEX escaped character during the decode
process.
2. URI Decoding: Break up URI before decode.
In chan_sip.c ast_uri_decode is called on the entire URI instead of it's
individual parts after it is parsed. This is not good as ast_uri_decode
can introduce special characters back into the URI which can mess up parsing.
This patch resolves this by not decoding a URI until parsing is completely
done. There are many instances where we check to see if pedantic checking
is enabled before we decode a URI. In these cases a new macro,
SIP_PEDANTIC_DECODE, is used on the individual parsed segments of the URI
rather than constantly putting if (pedantic) { decode() } checks everywhere
in the code. In the areas where ast_uri_decode is not dependent upon
pedantic checking this macro is not used, but decoding is still moved to
each individual part of the URI. The only behavior that should change from
this patch is the time at which decoding occurs.
Since I had to look over every place URI parsing occurs to create this
patch, I found several places where we use duplicate code for parsing.
To consolidate the code, those areas have updated to use the parse_uri()
function where possible.
3. SIP display-name decoding according to RFC3261 section 25.
To properly decode the display-name portion of a FROM header, chan_sip's
get_calleridname() function required a complete re-write. More information
about this change can be found in the comments at the beginning of this function.
4. Unit Tests.
Unit tests for ast_uri_encode, ast_uri_decode, and get_calleridname() have been
written. This involved the addition of the test_utils.c file for testing the
utils api.
(closes issue #16299)
Reported by: wdoekes
Patches:
astsvn-16299-get_calleridname.diff uploaded by wdoekes (license 717)
get_calleridname_rewrite.diff uploaded by dvossel (license 671)
Tested by: wdoekes, dvossel, Nick_Lewis
Review: https://reviewboard.asterisk.org/r/469/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@243200 65c4cc65-6c06-0410-ace0-fbb531ad65f3
2010-01-26 16:30:08 +00:00
/*
* Asterisk - - An open source telephony toolkit .
*
* Copyright ( C ) 2010 , Digium , Inc .
*
* David Vossel < dvossel @ digium . com >
Various updates to the unit test API.
1) It occurred to me that the difference in usage between the error ast_str and
the ast_test_update_status() usage has turned out to be a bit ambiguous in
practice. In a lot of cases, the same message was being sent to both.
In other cases, it was only sent to one or the other. My opinion now is that
in every case, I think it makes sense to do both; we should output it to the
CLI as well as save it off for logging purposes.
This change results in most of the changes in this diff, since it required
changes to all existing unit tests. It also allowed for some simplifications
of unit test API implementation code.
2) Update ast_test_status_update() to include the file, function, and line
number for the code providing the update.
3) There are some formatting tweaks here and there. Hopefully they aren't too
distracting for code review purposes. Reviewboard's diff viewer seems to do a
pretty good job of pointing out when something is a whitespace change.
4) I moved the md5_test and sha1_test into the test_utils module. It seemed
like a better approach since these tests are so tiny.
5) I changed the number of nodes used in heap_test_2 from 1 million to
100 thousand. The only reason for this was to reduce the time it took
for this test to run.
6) Remove an unused function prototype that was at the bottom of utils.h.
7) Simplify test_insert() using the LIST_INSERT_SORTALPHA() macro. The one
minor difference in behavior is that it no longer checks for a test registered
with the same name.
8) Expand the code in test_alloc() to provide specific error messages for each
failure case, to clearly inform developers if they forget to set the name,
summary, description, etc.
9) Tweak the output of the "test show registered" CLI command. I swapped the
name and category to have the category first. It seemed more natural since
that is the sort key.
10) Don't output the status ast_str in the "test show results" CLI command.
This is going to tend to be pretty verbose, so just leave that for the
detailed test logs (test generate results).
Review: https://reviewboard.asterisk.org/r/493/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@245864 65c4cc65-6c06-0410-ace0-fbb531ad65f3
2010-02-09 23:32:14 +00:00
* Russell Bryant < russell @ digium . com >
RFC compliant uri and display-name encode/decode
1. URI Encoding
This patch changes ast_uri_encode()'s behavior when doreserved is enabled.
Previously when doreserved was enabled only a small set of reserved
characters were encoded. This set was comprised primarily of the reserved
characters defined in RFC3261 section 25.1, but contained other characters as
well. Rather than only escaping the reserved set, doreserved now escapes
all characters not within the unreserved set as defined by RFC 3261 and
RFC 2396. Also, the 'doreserved' variable has been renamed to 'do_special_char'
in attempts to avoid confusion.
When doreserve is not enabled, the previous logic of only encoding the
characters <= 0X1F and > 0X7f remains, except for the '%' character, which
must always be encoded as it signifies a HEX escaped character during the decode
process.
2. URI Decoding: Break up URI before decode.
In chan_sip.c ast_uri_decode is called on the entire URI instead of it's
individual parts after it is parsed. This is not good as ast_uri_decode
can introduce special characters back into the URI which can mess up parsing.
This patch resolves this by not decoding a URI until parsing is completely
done. There are many instances where we check to see if pedantic checking
is enabled before we decode a URI. In these cases a new macro,
SIP_PEDANTIC_DECODE, is used on the individual parsed segments of the URI
rather than constantly putting if (pedantic) { decode() } checks everywhere
in the code. In the areas where ast_uri_decode is not dependent upon
pedantic checking this macro is not used, but decoding is still moved to
each individual part of the URI. The only behavior that should change from
this patch is the time at which decoding occurs.
Since I had to look over every place URI parsing occurs to create this
patch, I found several places where we use duplicate code for parsing.
To consolidate the code, those areas have updated to use the parse_uri()
function where possible.
3. SIP display-name decoding according to RFC3261 section 25.
To properly decode the display-name portion of a FROM header, chan_sip's
get_calleridname() function required a complete re-write. More information
about this change can be found in the comments at the beginning of this function.
4. Unit Tests.
Unit tests for ast_uri_encode, ast_uri_decode, and get_calleridname() have been
written. This involved the addition of the test_utils.c file for testing the
utils api.
(closes issue #16299)
Reported by: wdoekes
Patches:
astsvn-16299-get_calleridname.diff uploaded by wdoekes (license 717)
get_calleridname_rewrite.diff uploaded by dvossel (license 671)
Tested by: wdoekes, dvossel, Nick_Lewis
Review: https://reviewboard.asterisk.org/r/469/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@243200 65c4cc65-6c06-0410-ace0-fbb531ad65f3
2010-01-26 16:30:08 +00:00
*
* See http : //www.asterisk.org for more information about
* the Asterisk project . Please do not directly contact
* any of the maintainers of this project for assistance ;
* the project provides a web site , mailing lists and IRC
* channels for your use .
*
* This program is free software , distributed under the terms of
* the GNU General Public License Version 2. See the LICENSE file
* at the top of the source tree .
*/
Various updates to the unit test API.
1) It occurred to me that the difference in usage between the error ast_str and
the ast_test_update_status() usage has turned out to be a bit ambiguous in
practice. In a lot of cases, the same message was being sent to both.
In other cases, it was only sent to one or the other. My opinion now is that
in every case, I think it makes sense to do both; we should output it to the
CLI as well as save it off for logging purposes.
This change results in most of the changes in this diff, since it required
changes to all existing unit tests. It also allowed for some simplifications
of unit test API implementation code.
2) Update ast_test_status_update() to include the file, function, and line
number for the code providing the update.
3) There are some formatting tweaks here and there. Hopefully they aren't too
distracting for code review purposes. Reviewboard's diff viewer seems to do a
pretty good job of pointing out when something is a whitespace change.
4) I moved the md5_test and sha1_test into the test_utils module. It seemed
like a better approach since these tests are so tiny.
5) I changed the number of nodes used in heap_test_2 from 1 million to
100 thousand. The only reason for this was to reduce the time it took
for this test to run.
6) Remove an unused function prototype that was at the bottom of utils.h.
7) Simplify test_insert() using the LIST_INSERT_SORTALPHA() macro. The one
minor difference in behavior is that it no longer checks for a test registered
with the same name.
8) Expand the code in test_alloc() to provide specific error messages for each
failure case, to clearly inform developers if they forget to set the name,
summary, description, etc.
9) Tweak the output of the "test show registered" CLI command. I swapped the
name and category to have the category first. It seemed more natural since
that is the sort key.
10) Don't output the status ast_str in the "test show results" CLI command.
This is going to tend to be pretty verbose, so just leave that for the
detailed test logs (test generate results).
Review: https://reviewboard.asterisk.org/r/493/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@245864 65c4cc65-6c06-0410-ace0-fbb531ad65f3
2010-02-09 23:32:14 +00:00
/*!
* \ file
RFC compliant uri and display-name encode/decode
1. URI Encoding
This patch changes ast_uri_encode()'s behavior when doreserved is enabled.
Previously when doreserved was enabled only a small set of reserved
characters were encoded. This set was comprised primarily of the reserved
characters defined in RFC3261 section 25.1, but contained other characters as
well. Rather than only escaping the reserved set, doreserved now escapes
all characters not within the unreserved set as defined by RFC 3261 and
RFC 2396. Also, the 'doreserved' variable has been renamed to 'do_special_char'
in attempts to avoid confusion.
When doreserve is not enabled, the previous logic of only encoding the
characters <= 0X1F and > 0X7f remains, except for the '%' character, which
must always be encoded as it signifies a HEX escaped character during the decode
process.
2. URI Decoding: Break up URI before decode.
In chan_sip.c ast_uri_decode is called on the entire URI instead of it's
individual parts after it is parsed. This is not good as ast_uri_decode
can introduce special characters back into the URI which can mess up parsing.
This patch resolves this by not decoding a URI until parsing is completely
done. There are many instances where we check to see if pedantic checking
is enabled before we decode a URI. In these cases a new macro,
SIP_PEDANTIC_DECODE, is used on the individual parsed segments of the URI
rather than constantly putting if (pedantic) { decode() } checks everywhere
in the code. In the areas where ast_uri_decode is not dependent upon
pedantic checking this macro is not used, but decoding is still moved to
each individual part of the URI. The only behavior that should change from
this patch is the time at which decoding occurs.
Since I had to look over every place URI parsing occurs to create this
patch, I found several places where we use duplicate code for parsing.
To consolidate the code, those areas have updated to use the parse_uri()
function where possible.
3. SIP display-name decoding according to RFC3261 section 25.
To properly decode the display-name portion of a FROM header, chan_sip's
get_calleridname() function required a complete re-write. More information
about this change can be found in the comments at the beginning of this function.
4. Unit Tests.
Unit tests for ast_uri_encode, ast_uri_decode, and get_calleridname() have been
written. This involved the addition of the test_utils.c file for testing the
utils api.
(closes issue #16299)
Reported by: wdoekes
Patches:
astsvn-16299-get_calleridname.diff uploaded by wdoekes (license 717)
get_calleridname_rewrite.diff uploaded by dvossel (license 671)
Tested by: wdoekes, dvossel, Nick_Lewis
Review: https://reviewboard.asterisk.org/r/469/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@243200 65c4cc65-6c06-0410-ace0-fbb531ad65f3
2010-01-26 16:30:08 +00:00
* \ brief Unit Tests for utils API
*
* \ author David Vossel < dvossel @ digium . com >
Various updates to the unit test API.
1) It occurred to me that the difference in usage between the error ast_str and
the ast_test_update_status() usage has turned out to be a bit ambiguous in
practice. In a lot of cases, the same message was being sent to both.
In other cases, it was only sent to one or the other. My opinion now is that
in every case, I think it makes sense to do both; we should output it to the
CLI as well as save it off for logging purposes.
This change results in most of the changes in this diff, since it required
changes to all existing unit tests. It also allowed for some simplifications
of unit test API implementation code.
2) Update ast_test_status_update() to include the file, function, and line
number for the code providing the update.
3) There are some formatting tweaks here and there. Hopefully they aren't too
distracting for code review purposes. Reviewboard's diff viewer seems to do a
pretty good job of pointing out when something is a whitespace change.
4) I moved the md5_test and sha1_test into the test_utils module. It seemed
like a better approach since these tests are so tiny.
5) I changed the number of nodes used in heap_test_2 from 1 million to
100 thousand. The only reason for this was to reduce the time it took
for this test to run.
6) Remove an unused function prototype that was at the bottom of utils.h.
7) Simplify test_insert() using the LIST_INSERT_SORTALPHA() macro. The one
minor difference in behavior is that it no longer checks for a test registered
with the same name.
8) Expand the code in test_alloc() to provide specific error messages for each
failure case, to clearly inform developers if they forget to set the name,
summary, description, etc.
9) Tweak the output of the "test show registered" CLI command. I swapped the
name and category to have the category first. It seemed more natural since
that is the sort key.
10) Don't output the status ast_str in the "test show results" CLI command.
This is going to tend to be pretty verbose, so just leave that for the
detailed test logs (test generate results).
Review: https://reviewboard.asterisk.org/r/493/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@245864 65c4cc65-6c06-0410-ace0-fbb531ad65f3
2010-02-09 23:32:14 +00:00
* \ author Russell Bryant < russell @ digium . com >
RFC compliant uri and display-name encode/decode
1. URI Encoding
This patch changes ast_uri_encode()'s behavior when doreserved is enabled.
Previously when doreserved was enabled only a small set of reserved
characters were encoded. This set was comprised primarily of the reserved
characters defined in RFC3261 section 25.1, but contained other characters as
well. Rather than only escaping the reserved set, doreserved now escapes
all characters not within the unreserved set as defined by RFC 3261 and
RFC 2396. Also, the 'doreserved' variable has been renamed to 'do_special_char'
in attempts to avoid confusion.
When doreserve is not enabled, the previous logic of only encoding the
characters <= 0X1F and > 0X7f remains, except for the '%' character, which
must always be encoded as it signifies a HEX escaped character during the decode
process.
2. URI Decoding: Break up URI before decode.
In chan_sip.c ast_uri_decode is called on the entire URI instead of it's
individual parts after it is parsed. This is not good as ast_uri_decode
can introduce special characters back into the URI which can mess up parsing.
This patch resolves this by not decoding a URI until parsing is completely
done. There are many instances where we check to see if pedantic checking
is enabled before we decode a URI. In these cases a new macro,
SIP_PEDANTIC_DECODE, is used on the individual parsed segments of the URI
rather than constantly putting if (pedantic) { decode() } checks everywhere
in the code. In the areas where ast_uri_decode is not dependent upon
pedantic checking this macro is not used, but decoding is still moved to
each individual part of the URI. The only behavior that should change from
this patch is the time at which decoding occurs.
Since I had to look over every place URI parsing occurs to create this
patch, I found several places where we use duplicate code for parsing.
To consolidate the code, those areas have updated to use the parse_uri()
function where possible.
3. SIP display-name decoding according to RFC3261 section 25.
To properly decode the display-name portion of a FROM header, chan_sip's
get_calleridname() function required a complete re-write. More information
about this change can be found in the comments at the beginning of this function.
4. Unit Tests.
Unit tests for ast_uri_encode, ast_uri_decode, and get_calleridname() have been
written. This involved the addition of the test_utils.c file for testing the
utils api.
(closes issue #16299)
Reported by: wdoekes
Patches:
astsvn-16299-get_calleridname.diff uploaded by wdoekes (license 717)
get_calleridname_rewrite.diff uploaded by dvossel (license 671)
Tested by: wdoekes, dvossel, Nick_Lewis
Review: https://reviewboard.asterisk.org/r/469/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@243200 65c4cc65-6c06-0410-ace0-fbb531ad65f3
2010-01-26 16:30:08 +00:00
*/
/*** MODULEINFO
< depend > TEST_FRAMEWORK < / depend >
* * */
# include "asterisk.h"
ASTERISK_FILE_VERSION ( __FILE__ , " $Revision$ " ) ;
# include "asterisk/utils.h"
# include "asterisk/test.h"
2010-07-14 20:48:59 +00:00
# include "asterisk/crypto.h"
# include "asterisk/adsi.h"
# include "asterisk/agi.h"
# include "asterisk/channel.h"
RFC compliant uri and display-name encode/decode
1. URI Encoding
This patch changes ast_uri_encode()'s behavior when doreserved is enabled.
Previously when doreserved was enabled only a small set of reserved
characters were encoded. This set was comprised primarily of the reserved
characters defined in RFC3261 section 25.1, but contained other characters as
well. Rather than only escaping the reserved set, doreserved now escapes
all characters not within the unreserved set as defined by RFC 3261 and
RFC 2396. Also, the 'doreserved' variable has been renamed to 'do_special_char'
in attempts to avoid confusion.
When doreserve is not enabled, the previous logic of only encoding the
characters <= 0X1F and > 0X7f remains, except for the '%' character, which
must always be encoded as it signifies a HEX escaped character during the decode
process.
2. URI Decoding: Break up URI before decode.
In chan_sip.c ast_uri_decode is called on the entire URI instead of it's
individual parts after it is parsed. This is not good as ast_uri_decode
can introduce special characters back into the URI which can mess up parsing.
This patch resolves this by not decoding a URI until parsing is completely
done. There are many instances where we check to see if pedantic checking
is enabled before we decode a URI. In these cases a new macro,
SIP_PEDANTIC_DECODE, is used on the individual parsed segments of the URI
rather than constantly putting if (pedantic) { decode() } checks everywhere
in the code. In the areas where ast_uri_decode is not dependent upon
pedantic checking this macro is not used, but decoding is still moved to
each individual part of the URI. The only behavior that should change from
this patch is the time at which decoding occurs.
Since I had to look over every place URI parsing occurs to create this
patch, I found several places where we use duplicate code for parsing.
To consolidate the code, those areas have updated to use the parse_uri()
function where possible.
3. SIP display-name decoding according to RFC3261 section 25.
To properly decode the display-name portion of a FROM header, chan_sip's
get_calleridname() function required a complete re-write. More information
about this change can be found in the comments at the beginning of this function.
4. Unit Tests.
Unit tests for ast_uri_encode, ast_uri_decode, and get_calleridname() have been
written. This involved the addition of the test_utils.c file for testing the
utils api.
(closes issue #16299)
Reported by: wdoekes
Patches:
astsvn-16299-get_calleridname.diff uploaded by wdoekes (license 717)
get_calleridname_rewrite.diff uploaded by dvossel (license 671)
Tested by: wdoekes, dvossel, Nick_Lewis
Review: https://reviewboard.asterisk.org/r/469/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@243200 65c4cc65-6c06-0410-ace0-fbb531ad65f3
2010-01-26 16:30:08 +00:00
# include "asterisk/module.h"
AST_TEST_DEFINE ( uri_encode_decode_test )
{
int res = AST_TEST_PASS ;
const char * in = " abcdefghijklmnopurstuvwxyz ABCDEFGHIJKLMNOPQRSTUVWXYZ 1234567890 ~`!@#$%^&*()_-+={[}]| \\ :; \" '<,>.?/ " ;
const char * expected1 = " abcdefghijklmnopurstuvwxyz%20ABCDEFGHIJKLMNOPQRSTUVWXYZ%201234567890%20~%60!%40%23%24%25%5E%26*()_-%2B%3D%7B%5B%7D%5D%7C%5C%3A%3B%22'%3C%2C%3E.%3F%2F " ;
const char * expected2 = " abcdefghijklmnopurstuvwxyz ABCDEFGHIJKLMNOPQRSTUVWXYZ 1234567890 ~`!@#$%25^&*()_-+={[}]| \\ :; \" '<,>.?/ " ;
char out [ 256 ] = { 0 } ;
switch ( cmd ) {
case TEST_INIT :
info - > name = " uri_encode_decode_test " ;
2010-07-09 17:00:22 +00:00
info - > category = " /main/utils/ " ;
RFC compliant uri and display-name encode/decode
1. URI Encoding
This patch changes ast_uri_encode()'s behavior when doreserved is enabled.
Previously when doreserved was enabled only a small set of reserved
characters were encoded. This set was comprised primarily of the reserved
characters defined in RFC3261 section 25.1, but contained other characters as
well. Rather than only escaping the reserved set, doreserved now escapes
all characters not within the unreserved set as defined by RFC 3261 and
RFC 2396. Also, the 'doreserved' variable has been renamed to 'do_special_char'
in attempts to avoid confusion.
When doreserve is not enabled, the previous logic of only encoding the
characters <= 0X1F and > 0X7f remains, except for the '%' character, which
must always be encoded as it signifies a HEX escaped character during the decode
process.
2. URI Decoding: Break up URI before decode.
In chan_sip.c ast_uri_decode is called on the entire URI instead of it's
individual parts after it is parsed. This is not good as ast_uri_decode
can introduce special characters back into the URI which can mess up parsing.
This patch resolves this by not decoding a URI until parsing is completely
done. There are many instances where we check to see if pedantic checking
is enabled before we decode a URI. In these cases a new macro,
SIP_PEDANTIC_DECODE, is used on the individual parsed segments of the URI
rather than constantly putting if (pedantic) { decode() } checks everywhere
in the code. In the areas where ast_uri_decode is not dependent upon
pedantic checking this macro is not used, but decoding is still moved to
each individual part of the URI. The only behavior that should change from
this patch is the time at which decoding occurs.
Since I had to look over every place URI parsing occurs to create this
patch, I found several places where we use duplicate code for parsing.
To consolidate the code, those areas have updated to use the parse_uri()
function where possible.
3. SIP display-name decoding according to RFC3261 section 25.
To properly decode the display-name portion of a FROM header, chan_sip's
get_calleridname() function required a complete re-write. More information
about this change can be found in the comments at the beginning of this function.
4. Unit Tests.
Unit tests for ast_uri_encode, ast_uri_decode, and get_calleridname() have been
written. This involved the addition of the test_utils.c file for testing the
utils api.
(closes issue #16299)
Reported by: wdoekes
Patches:
astsvn-16299-get_calleridname.diff uploaded by wdoekes (license 717)
get_calleridname_rewrite.diff uploaded by dvossel (license 671)
Tested by: wdoekes, dvossel, Nick_Lewis
Review: https://reviewboard.asterisk.org/r/469/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@243200 65c4cc65-6c06-0410-ace0-fbb531ad65f3
2010-01-26 16:30:08 +00:00
info - > summary = " encode and decode a hex escaped string " ;
info - > description = " encode a string, verify encoded string matches what we expect. Decode the encoded string, verify decoded string matches the original string. " ;
return AST_TEST_NOT_RUN ;
case TEST_EXECUTE :
break ;
}
Various updates to the unit test API.
1) It occurred to me that the difference in usage between the error ast_str and
the ast_test_update_status() usage has turned out to be a bit ambiguous in
practice. In a lot of cases, the same message was being sent to both.
In other cases, it was only sent to one or the other. My opinion now is that
in every case, I think it makes sense to do both; we should output it to the
CLI as well as save it off for logging purposes.
This change results in most of the changes in this diff, since it required
changes to all existing unit tests. It also allowed for some simplifications
of unit test API implementation code.
2) Update ast_test_status_update() to include the file, function, and line
number for the code providing the update.
3) There are some formatting tweaks here and there. Hopefully they aren't too
distracting for code review purposes. Reviewboard's diff viewer seems to do a
pretty good job of pointing out when something is a whitespace change.
4) I moved the md5_test and sha1_test into the test_utils module. It seemed
like a better approach since these tests are so tiny.
5) I changed the number of nodes used in heap_test_2 from 1 million to
100 thousand. The only reason for this was to reduce the time it took
for this test to run.
6) Remove an unused function prototype that was at the bottom of utils.h.
7) Simplify test_insert() using the LIST_INSERT_SORTALPHA() macro. The one
minor difference in behavior is that it no longer checks for a test registered
with the same name.
8) Expand the code in test_alloc() to provide specific error messages for each
failure case, to clearly inform developers if they forget to set the name,
summary, description, etc.
9) Tweak the output of the "test show registered" CLI command. I swapped the
name and category to have the category first. It seemed more natural since
that is the sort key.
10) Don't output the status ast_str in the "test show results" CLI command.
This is going to tend to be pretty verbose, so just leave that for the
detailed test logs (test generate results).
Review: https://reviewboard.asterisk.org/r/493/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@245864 65c4cc65-6c06-0410-ace0-fbb531ad65f3
2010-02-09 23:32:14 +00:00
ast_test_status_update ( test , " Input before executing ast_uri_encode: \n %s \n " , in ) ;
ast_test_status_update ( test , " Output expected for ast_uri_encode with enabling do_special_char: %s \n " , expected1 ) ;
ast_test_status_update ( test , " Output expected for ast_uri_encode with out enabling do_special_char: %s \n \n " , expected2 ) ;
RFC compliant uri and display-name encode/decode
1. URI Encoding
This patch changes ast_uri_encode()'s behavior when doreserved is enabled.
Previously when doreserved was enabled only a small set of reserved
characters were encoded. This set was comprised primarily of the reserved
characters defined in RFC3261 section 25.1, but contained other characters as
well. Rather than only escaping the reserved set, doreserved now escapes
all characters not within the unreserved set as defined by RFC 3261 and
RFC 2396. Also, the 'doreserved' variable has been renamed to 'do_special_char'
in attempts to avoid confusion.
When doreserve is not enabled, the previous logic of only encoding the
characters <= 0X1F and > 0X7f remains, except for the '%' character, which
must always be encoded as it signifies a HEX escaped character during the decode
process.
2. URI Decoding: Break up URI before decode.
In chan_sip.c ast_uri_decode is called on the entire URI instead of it's
individual parts after it is parsed. This is not good as ast_uri_decode
can introduce special characters back into the URI which can mess up parsing.
This patch resolves this by not decoding a URI until parsing is completely
done. There are many instances where we check to see if pedantic checking
is enabled before we decode a URI. In these cases a new macro,
SIP_PEDANTIC_DECODE, is used on the individual parsed segments of the URI
rather than constantly putting if (pedantic) { decode() } checks everywhere
in the code. In the areas where ast_uri_decode is not dependent upon
pedantic checking this macro is not used, but decoding is still moved to
each individual part of the URI. The only behavior that should change from
this patch is the time at which decoding occurs.
Since I had to look over every place URI parsing occurs to create this
patch, I found several places where we use duplicate code for parsing.
To consolidate the code, those areas have updated to use the parse_uri()
function where possible.
3. SIP display-name decoding according to RFC3261 section 25.
To properly decode the display-name portion of a FROM header, chan_sip's
get_calleridname() function required a complete re-write. More information
about this change can be found in the comments at the beginning of this function.
4. Unit Tests.
Unit tests for ast_uri_encode, ast_uri_decode, and get_calleridname() have been
written. This involved the addition of the test_utils.c file for testing the
utils api.
(closes issue #16299)
Reported by: wdoekes
Patches:
astsvn-16299-get_calleridname.diff uploaded by wdoekes (license 717)
get_calleridname_rewrite.diff uploaded by dvossel (license 671)
Tested by: wdoekes, dvossel, Nick_Lewis
Review: https://reviewboard.asterisk.org/r/469/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@243200 65c4cc65-6c06-0410-ace0-fbb531ad65f3
2010-01-26 16:30:08 +00:00
/* Test with do_special_char enabled */
ast_uri_encode ( in , out , sizeof ( out ) , 1 ) ;
Various updates to the unit test API.
1) It occurred to me that the difference in usage between the error ast_str and
the ast_test_update_status() usage has turned out to be a bit ambiguous in
practice. In a lot of cases, the same message was being sent to both.
In other cases, it was only sent to one or the other. My opinion now is that
in every case, I think it makes sense to do both; we should output it to the
CLI as well as save it off for logging purposes.
This change results in most of the changes in this diff, since it required
changes to all existing unit tests. It also allowed for some simplifications
of unit test API implementation code.
2) Update ast_test_status_update() to include the file, function, and line
number for the code providing the update.
3) There are some formatting tweaks here and there. Hopefully they aren't too
distracting for code review purposes. Reviewboard's diff viewer seems to do a
pretty good job of pointing out when something is a whitespace change.
4) I moved the md5_test and sha1_test into the test_utils module. It seemed
like a better approach since these tests are so tiny.
5) I changed the number of nodes used in heap_test_2 from 1 million to
100 thousand. The only reason for this was to reduce the time it took
for this test to run.
6) Remove an unused function prototype that was at the bottom of utils.h.
7) Simplify test_insert() using the LIST_INSERT_SORTALPHA() macro. The one
minor difference in behavior is that it no longer checks for a test registered
with the same name.
8) Expand the code in test_alloc() to provide specific error messages for each
failure case, to clearly inform developers if they forget to set the name,
summary, description, etc.
9) Tweak the output of the "test show registered" CLI command. I swapped the
name and category to have the category first. It seemed more natural since
that is the sort key.
10) Don't output the status ast_str in the "test show results" CLI command.
This is going to tend to be pretty verbose, so just leave that for the
detailed test logs (test generate results).
Review: https://reviewboard.asterisk.org/r/493/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@245864 65c4cc65-6c06-0410-ace0-fbb531ad65f3
2010-02-09 23:32:14 +00:00
ast_test_status_update ( test , " Output after enabling do_special_char: \n %s \n " , out ) ;
RFC compliant uri and display-name encode/decode
1. URI Encoding
This patch changes ast_uri_encode()'s behavior when doreserved is enabled.
Previously when doreserved was enabled only a small set of reserved
characters were encoded. This set was comprised primarily of the reserved
characters defined in RFC3261 section 25.1, but contained other characters as
well. Rather than only escaping the reserved set, doreserved now escapes
all characters not within the unreserved set as defined by RFC 3261 and
RFC 2396. Also, the 'doreserved' variable has been renamed to 'do_special_char'
in attempts to avoid confusion.
When doreserve is not enabled, the previous logic of only encoding the
characters <= 0X1F and > 0X7f remains, except for the '%' character, which
must always be encoded as it signifies a HEX escaped character during the decode
process.
2. URI Decoding: Break up URI before decode.
In chan_sip.c ast_uri_decode is called on the entire URI instead of it's
individual parts after it is parsed. This is not good as ast_uri_decode
can introduce special characters back into the URI which can mess up parsing.
This patch resolves this by not decoding a URI until parsing is completely
done. There are many instances where we check to see if pedantic checking
is enabled before we decode a URI. In these cases a new macro,
SIP_PEDANTIC_DECODE, is used on the individual parsed segments of the URI
rather than constantly putting if (pedantic) { decode() } checks everywhere
in the code. In the areas where ast_uri_decode is not dependent upon
pedantic checking this macro is not used, but decoding is still moved to
each individual part of the URI. The only behavior that should change from
this patch is the time at which decoding occurs.
Since I had to look over every place URI parsing occurs to create this
patch, I found several places where we use duplicate code for parsing.
To consolidate the code, those areas have updated to use the parse_uri()
function where possible.
3. SIP display-name decoding according to RFC3261 section 25.
To properly decode the display-name portion of a FROM header, chan_sip's
get_calleridname() function required a complete re-write. More information
about this change can be found in the comments at the beginning of this function.
4. Unit Tests.
Unit tests for ast_uri_encode, ast_uri_decode, and get_calleridname() have been
written. This involved the addition of the test_utils.c file for testing the
utils api.
(closes issue #16299)
Reported by: wdoekes
Patches:
astsvn-16299-get_calleridname.diff uploaded by wdoekes (license 717)
get_calleridname_rewrite.diff uploaded by dvossel (license 671)
Tested by: wdoekes, dvossel, Nick_Lewis
Review: https://reviewboard.asterisk.org/r/469/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@243200 65c4cc65-6c06-0410-ace0-fbb531ad65f3
2010-01-26 16:30:08 +00:00
if ( strcmp ( expected1 , out ) ) {
Various updates to the unit test API.
1) It occurred to me that the difference in usage between the error ast_str and
the ast_test_update_status() usage has turned out to be a bit ambiguous in
practice. In a lot of cases, the same message was being sent to both.
In other cases, it was only sent to one or the other. My opinion now is that
in every case, I think it makes sense to do both; we should output it to the
CLI as well as save it off for logging purposes.
This change results in most of the changes in this diff, since it required
changes to all existing unit tests. It also allowed for some simplifications
of unit test API implementation code.
2) Update ast_test_status_update() to include the file, function, and line
number for the code providing the update.
3) There are some formatting tweaks here and there. Hopefully they aren't too
distracting for code review purposes. Reviewboard's diff viewer seems to do a
pretty good job of pointing out when something is a whitespace change.
4) I moved the md5_test and sha1_test into the test_utils module. It seemed
like a better approach since these tests are so tiny.
5) I changed the number of nodes used in heap_test_2 from 1 million to
100 thousand. The only reason for this was to reduce the time it took
for this test to run.
6) Remove an unused function prototype that was at the bottom of utils.h.
7) Simplify test_insert() using the LIST_INSERT_SORTALPHA() macro. The one
minor difference in behavior is that it no longer checks for a test registered
with the same name.
8) Expand the code in test_alloc() to provide specific error messages for each
failure case, to clearly inform developers if they forget to set the name,
summary, description, etc.
9) Tweak the output of the "test show registered" CLI command. I swapped the
name and category to have the category first. It seemed more natural since
that is the sort key.
10) Don't output the status ast_str in the "test show results" CLI command.
This is going to tend to be pretty verbose, so just leave that for the
detailed test logs (test generate results).
Review: https://reviewboard.asterisk.org/r/493/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@245864 65c4cc65-6c06-0410-ace0-fbb531ad65f3
2010-02-09 23:32:14 +00:00
ast_test_status_update ( test , " ENCODE DOES NOT MATCH EXPECTED, FAIL \n " ) ;
RFC compliant uri and display-name encode/decode
1. URI Encoding
This patch changes ast_uri_encode()'s behavior when doreserved is enabled.
Previously when doreserved was enabled only a small set of reserved
characters were encoded. This set was comprised primarily of the reserved
characters defined in RFC3261 section 25.1, but contained other characters as
well. Rather than only escaping the reserved set, doreserved now escapes
all characters not within the unreserved set as defined by RFC 3261 and
RFC 2396. Also, the 'doreserved' variable has been renamed to 'do_special_char'
in attempts to avoid confusion.
When doreserve is not enabled, the previous logic of only encoding the
characters <= 0X1F and > 0X7f remains, except for the '%' character, which
must always be encoded as it signifies a HEX escaped character during the decode
process.
2. URI Decoding: Break up URI before decode.
In chan_sip.c ast_uri_decode is called on the entire URI instead of it's
individual parts after it is parsed. This is not good as ast_uri_decode
can introduce special characters back into the URI which can mess up parsing.
This patch resolves this by not decoding a URI until parsing is completely
done. There are many instances where we check to see if pedantic checking
is enabled before we decode a URI. In these cases a new macro,
SIP_PEDANTIC_DECODE, is used on the individual parsed segments of the URI
rather than constantly putting if (pedantic) { decode() } checks everywhere
in the code. In the areas where ast_uri_decode is not dependent upon
pedantic checking this macro is not used, but decoding is still moved to
each individual part of the URI. The only behavior that should change from
this patch is the time at which decoding occurs.
Since I had to look over every place URI parsing occurs to create this
patch, I found several places where we use duplicate code for parsing.
To consolidate the code, those areas have updated to use the parse_uri()
function where possible.
3. SIP display-name decoding according to RFC3261 section 25.
To properly decode the display-name portion of a FROM header, chan_sip's
get_calleridname() function required a complete re-write. More information
about this change can be found in the comments at the beginning of this function.
4. Unit Tests.
Unit tests for ast_uri_encode, ast_uri_decode, and get_calleridname() have been
written. This involved the addition of the test_utils.c file for testing the
utils api.
(closes issue #16299)
Reported by: wdoekes
Patches:
astsvn-16299-get_calleridname.diff uploaded by wdoekes (license 717)
get_calleridname_rewrite.diff uploaded by dvossel (license 671)
Tested by: wdoekes, dvossel, Nick_Lewis
Review: https://reviewboard.asterisk.org/r/469/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@243200 65c4cc65-6c06-0410-ace0-fbb531ad65f3
2010-01-26 16:30:08 +00:00
res = AST_TEST_FAIL ;
}
/* Verify uri decode matches original */
ast_uri_decode ( out ) ;
if ( strcmp ( in , out ) ) {
Various updates to the unit test API.
1) It occurred to me that the difference in usage between the error ast_str and
the ast_test_update_status() usage has turned out to be a bit ambiguous in
practice. In a lot of cases, the same message was being sent to both.
In other cases, it was only sent to one or the other. My opinion now is that
in every case, I think it makes sense to do both; we should output it to the
CLI as well as save it off for logging purposes.
This change results in most of the changes in this diff, since it required
changes to all existing unit tests. It also allowed for some simplifications
of unit test API implementation code.
2) Update ast_test_status_update() to include the file, function, and line
number for the code providing the update.
3) There are some formatting tweaks here and there. Hopefully they aren't too
distracting for code review purposes. Reviewboard's diff viewer seems to do a
pretty good job of pointing out when something is a whitespace change.
4) I moved the md5_test and sha1_test into the test_utils module. It seemed
like a better approach since these tests are so tiny.
5) I changed the number of nodes used in heap_test_2 from 1 million to
100 thousand. The only reason for this was to reduce the time it took
for this test to run.
6) Remove an unused function prototype that was at the bottom of utils.h.
7) Simplify test_insert() using the LIST_INSERT_SORTALPHA() macro. The one
minor difference in behavior is that it no longer checks for a test registered
with the same name.
8) Expand the code in test_alloc() to provide specific error messages for each
failure case, to clearly inform developers if they forget to set the name,
summary, description, etc.
9) Tweak the output of the "test show registered" CLI command. I swapped the
name and category to have the category first. It seemed more natural since
that is the sort key.
10) Don't output the status ast_str in the "test show results" CLI command.
This is going to tend to be pretty verbose, so just leave that for the
detailed test logs (test generate results).
Review: https://reviewboard.asterisk.org/r/493/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@245864 65c4cc65-6c06-0410-ace0-fbb531ad65f3
2010-02-09 23:32:14 +00:00
ast_test_status_update ( test , " Decoded string did not match original input \n " ) ;
RFC compliant uri and display-name encode/decode
1. URI Encoding
This patch changes ast_uri_encode()'s behavior when doreserved is enabled.
Previously when doreserved was enabled only a small set of reserved
characters were encoded. This set was comprised primarily of the reserved
characters defined in RFC3261 section 25.1, but contained other characters as
well. Rather than only escaping the reserved set, doreserved now escapes
all characters not within the unreserved set as defined by RFC 3261 and
RFC 2396. Also, the 'doreserved' variable has been renamed to 'do_special_char'
in attempts to avoid confusion.
When doreserve is not enabled, the previous logic of only encoding the
characters <= 0X1F and > 0X7f remains, except for the '%' character, which
must always be encoded as it signifies a HEX escaped character during the decode
process.
2. URI Decoding: Break up URI before decode.
In chan_sip.c ast_uri_decode is called on the entire URI instead of it's
individual parts after it is parsed. This is not good as ast_uri_decode
can introduce special characters back into the URI which can mess up parsing.
This patch resolves this by not decoding a URI until parsing is completely
done. There are many instances where we check to see if pedantic checking
is enabled before we decode a URI. In these cases a new macro,
SIP_PEDANTIC_DECODE, is used on the individual parsed segments of the URI
rather than constantly putting if (pedantic) { decode() } checks everywhere
in the code. In the areas where ast_uri_decode is not dependent upon
pedantic checking this macro is not used, but decoding is still moved to
each individual part of the URI. The only behavior that should change from
this patch is the time at which decoding occurs.
Since I had to look over every place URI parsing occurs to create this
patch, I found several places where we use duplicate code for parsing.
To consolidate the code, those areas have updated to use the parse_uri()
function where possible.
3. SIP display-name decoding according to RFC3261 section 25.
To properly decode the display-name portion of a FROM header, chan_sip's
get_calleridname() function required a complete re-write. More information
about this change can be found in the comments at the beginning of this function.
4. Unit Tests.
Unit tests for ast_uri_encode, ast_uri_decode, and get_calleridname() have been
written. This involved the addition of the test_utils.c file for testing the
utils api.
(closes issue #16299)
Reported by: wdoekes
Patches:
astsvn-16299-get_calleridname.diff uploaded by wdoekes (license 717)
get_calleridname_rewrite.diff uploaded by dvossel (license 671)
Tested by: wdoekes, dvossel, Nick_Lewis
Review: https://reviewboard.asterisk.org/r/469/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@243200 65c4cc65-6c06-0410-ace0-fbb531ad65f3
2010-01-26 16:30:08 +00:00
res = AST_TEST_FAIL ;
} else {
Various updates to the unit test API.
1) It occurred to me that the difference in usage between the error ast_str and
the ast_test_update_status() usage has turned out to be a bit ambiguous in
practice. In a lot of cases, the same message was being sent to both.
In other cases, it was only sent to one or the other. My opinion now is that
in every case, I think it makes sense to do both; we should output it to the
CLI as well as save it off for logging purposes.
This change results in most of the changes in this diff, since it required
changes to all existing unit tests. It also allowed for some simplifications
of unit test API implementation code.
2) Update ast_test_status_update() to include the file, function, and line
number for the code providing the update.
3) There are some formatting tweaks here and there. Hopefully they aren't too
distracting for code review purposes. Reviewboard's diff viewer seems to do a
pretty good job of pointing out when something is a whitespace change.
4) I moved the md5_test and sha1_test into the test_utils module. It seemed
like a better approach since these tests are so tiny.
5) I changed the number of nodes used in heap_test_2 from 1 million to
100 thousand. The only reason for this was to reduce the time it took
for this test to run.
6) Remove an unused function prototype that was at the bottom of utils.h.
7) Simplify test_insert() using the LIST_INSERT_SORTALPHA() macro. The one
minor difference in behavior is that it no longer checks for a test registered
with the same name.
8) Expand the code in test_alloc() to provide specific error messages for each
failure case, to clearly inform developers if they forget to set the name,
summary, description, etc.
9) Tweak the output of the "test show registered" CLI command. I swapped the
name and category to have the category first. It seemed more natural since
that is the sort key.
10) Don't output the status ast_str in the "test show results" CLI command.
This is going to tend to be pretty verbose, so just leave that for the
detailed test logs (test generate results).
Review: https://reviewboard.asterisk.org/r/493/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@245864 65c4cc65-6c06-0410-ace0-fbb531ad65f3
2010-02-09 23:32:14 +00:00
ast_test_status_update ( test , " Decoded string matched original input \n " ) ;
RFC compliant uri and display-name encode/decode
1. URI Encoding
This patch changes ast_uri_encode()'s behavior when doreserved is enabled.
Previously when doreserved was enabled only a small set of reserved
characters were encoded. This set was comprised primarily of the reserved
characters defined in RFC3261 section 25.1, but contained other characters as
well. Rather than only escaping the reserved set, doreserved now escapes
all characters not within the unreserved set as defined by RFC 3261 and
RFC 2396. Also, the 'doreserved' variable has been renamed to 'do_special_char'
in attempts to avoid confusion.
When doreserve is not enabled, the previous logic of only encoding the
characters <= 0X1F and > 0X7f remains, except for the '%' character, which
must always be encoded as it signifies a HEX escaped character during the decode
process.
2. URI Decoding: Break up URI before decode.
In chan_sip.c ast_uri_decode is called on the entire URI instead of it's
individual parts after it is parsed. This is not good as ast_uri_decode
can introduce special characters back into the URI which can mess up parsing.
This patch resolves this by not decoding a URI until parsing is completely
done. There are many instances where we check to see if pedantic checking
is enabled before we decode a URI. In these cases a new macro,
SIP_PEDANTIC_DECODE, is used on the individual parsed segments of the URI
rather than constantly putting if (pedantic) { decode() } checks everywhere
in the code. In the areas where ast_uri_decode is not dependent upon
pedantic checking this macro is not used, but decoding is still moved to
each individual part of the URI. The only behavior that should change from
this patch is the time at which decoding occurs.
Since I had to look over every place URI parsing occurs to create this
patch, I found several places where we use duplicate code for parsing.
To consolidate the code, those areas have updated to use the parse_uri()
function where possible.
3. SIP display-name decoding according to RFC3261 section 25.
To properly decode the display-name portion of a FROM header, chan_sip's
get_calleridname() function required a complete re-write. More information
about this change can be found in the comments at the beginning of this function.
4. Unit Tests.
Unit tests for ast_uri_encode, ast_uri_decode, and get_calleridname() have been
written. This involved the addition of the test_utils.c file for testing the
utils api.
(closes issue #16299)
Reported by: wdoekes
Patches:
astsvn-16299-get_calleridname.diff uploaded by wdoekes (license 717)
get_calleridname_rewrite.diff uploaded by dvossel (license 671)
Tested by: wdoekes, dvossel, Nick_Lewis
Review: https://reviewboard.asterisk.org/r/469/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@243200 65c4cc65-6c06-0410-ace0-fbb531ad65f3
2010-01-26 16:30:08 +00:00
}
/* Test with do_special_char disabled */
out [ 0 ] = ' \0 ' ;
ast_uri_encode ( in , out , sizeof ( out ) , 0 ) ;
Various updates to the unit test API.
1) It occurred to me that the difference in usage between the error ast_str and
the ast_test_update_status() usage has turned out to be a bit ambiguous in
practice. In a lot of cases, the same message was being sent to both.
In other cases, it was only sent to one or the other. My opinion now is that
in every case, I think it makes sense to do both; we should output it to the
CLI as well as save it off for logging purposes.
This change results in most of the changes in this diff, since it required
changes to all existing unit tests. It also allowed for some simplifications
of unit test API implementation code.
2) Update ast_test_status_update() to include the file, function, and line
number for the code providing the update.
3) There are some formatting tweaks here and there. Hopefully they aren't too
distracting for code review purposes. Reviewboard's diff viewer seems to do a
pretty good job of pointing out when something is a whitespace change.
4) I moved the md5_test and sha1_test into the test_utils module. It seemed
like a better approach since these tests are so tiny.
5) I changed the number of nodes used in heap_test_2 from 1 million to
100 thousand. The only reason for this was to reduce the time it took
for this test to run.
6) Remove an unused function prototype that was at the bottom of utils.h.
7) Simplify test_insert() using the LIST_INSERT_SORTALPHA() macro. The one
minor difference in behavior is that it no longer checks for a test registered
with the same name.
8) Expand the code in test_alloc() to provide specific error messages for each
failure case, to clearly inform developers if they forget to set the name,
summary, description, etc.
9) Tweak the output of the "test show registered" CLI command. I swapped the
name and category to have the category first. It seemed more natural since
that is the sort key.
10) Don't output the status ast_str in the "test show results" CLI command.
This is going to tend to be pretty verbose, so just leave that for the
detailed test logs (test generate results).
Review: https://reviewboard.asterisk.org/r/493/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@245864 65c4cc65-6c06-0410-ace0-fbb531ad65f3
2010-02-09 23:32:14 +00:00
ast_test_status_update ( test , " Output after disabling do_special_char: %s \n " , out ) ;
RFC compliant uri and display-name encode/decode
1. URI Encoding
This patch changes ast_uri_encode()'s behavior when doreserved is enabled.
Previously when doreserved was enabled only a small set of reserved
characters were encoded. This set was comprised primarily of the reserved
characters defined in RFC3261 section 25.1, but contained other characters as
well. Rather than only escaping the reserved set, doreserved now escapes
all characters not within the unreserved set as defined by RFC 3261 and
RFC 2396. Also, the 'doreserved' variable has been renamed to 'do_special_char'
in attempts to avoid confusion.
When doreserve is not enabled, the previous logic of only encoding the
characters <= 0X1F and > 0X7f remains, except for the '%' character, which
must always be encoded as it signifies a HEX escaped character during the decode
process.
2. URI Decoding: Break up URI before decode.
In chan_sip.c ast_uri_decode is called on the entire URI instead of it's
individual parts after it is parsed. This is not good as ast_uri_decode
can introduce special characters back into the URI which can mess up parsing.
This patch resolves this by not decoding a URI until parsing is completely
done. There are many instances where we check to see if pedantic checking
is enabled before we decode a URI. In these cases a new macro,
SIP_PEDANTIC_DECODE, is used on the individual parsed segments of the URI
rather than constantly putting if (pedantic) { decode() } checks everywhere
in the code. In the areas where ast_uri_decode is not dependent upon
pedantic checking this macro is not used, but decoding is still moved to
each individual part of the URI. The only behavior that should change from
this patch is the time at which decoding occurs.
Since I had to look over every place URI parsing occurs to create this
patch, I found several places where we use duplicate code for parsing.
To consolidate the code, those areas have updated to use the parse_uri()
function where possible.
3. SIP display-name decoding according to RFC3261 section 25.
To properly decode the display-name portion of a FROM header, chan_sip's
get_calleridname() function required a complete re-write. More information
about this change can be found in the comments at the beginning of this function.
4. Unit Tests.
Unit tests for ast_uri_encode, ast_uri_decode, and get_calleridname() have been
written. This involved the addition of the test_utils.c file for testing the
utils api.
(closes issue #16299)
Reported by: wdoekes
Patches:
astsvn-16299-get_calleridname.diff uploaded by wdoekes (license 717)
get_calleridname_rewrite.diff uploaded by dvossel (license 671)
Tested by: wdoekes, dvossel, Nick_Lewis
Review: https://reviewboard.asterisk.org/r/469/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@243200 65c4cc65-6c06-0410-ace0-fbb531ad65f3
2010-01-26 16:30:08 +00:00
if ( strcmp ( expected2 , out ) ) {
Various updates to the unit test API.
1) It occurred to me that the difference in usage between the error ast_str and
the ast_test_update_status() usage has turned out to be a bit ambiguous in
practice. In a lot of cases, the same message was being sent to both.
In other cases, it was only sent to one or the other. My opinion now is that
in every case, I think it makes sense to do both; we should output it to the
CLI as well as save it off for logging purposes.
This change results in most of the changes in this diff, since it required
changes to all existing unit tests. It also allowed for some simplifications
of unit test API implementation code.
2) Update ast_test_status_update() to include the file, function, and line
number for the code providing the update.
3) There are some formatting tweaks here and there. Hopefully they aren't too
distracting for code review purposes. Reviewboard's diff viewer seems to do a
pretty good job of pointing out when something is a whitespace change.
4) I moved the md5_test and sha1_test into the test_utils module. It seemed
like a better approach since these tests are so tiny.
5) I changed the number of nodes used in heap_test_2 from 1 million to
100 thousand. The only reason for this was to reduce the time it took
for this test to run.
6) Remove an unused function prototype that was at the bottom of utils.h.
7) Simplify test_insert() using the LIST_INSERT_SORTALPHA() macro. The one
minor difference in behavior is that it no longer checks for a test registered
with the same name.
8) Expand the code in test_alloc() to provide specific error messages for each
failure case, to clearly inform developers if they forget to set the name,
summary, description, etc.
9) Tweak the output of the "test show registered" CLI command. I swapped the
name and category to have the category first. It seemed more natural since
that is the sort key.
10) Don't output the status ast_str in the "test show results" CLI command.
This is going to tend to be pretty verbose, so just leave that for the
detailed test logs (test generate results).
Review: https://reviewboard.asterisk.org/r/493/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@245864 65c4cc65-6c06-0410-ace0-fbb531ad65f3
2010-02-09 23:32:14 +00:00
ast_test_status_update ( test , " ENCODE DOES NOT MATCH EXPECTED, FAIL \n " ) ;
RFC compliant uri and display-name encode/decode
1. URI Encoding
This patch changes ast_uri_encode()'s behavior when doreserved is enabled.
Previously when doreserved was enabled only a small set of reserved
characters were encoded. This set was comprised primarily of the reserved
characters defined in RFC3261 section 25.1, but contained other characters as
well. Rather than only escaping the reserved set, doreserved now escapes
all characters not within the unreserved set as defined by RFC 3261 and
RFC 2396. Also, the 'doreserved' variable has been renamed to 'do_special_char'
in attempts to avoid confusion.
When doreserve is not enabled, the previous logic of only encoding the
characters <= 0X1F and > 0X7f remains, except for the '%' character, which
must always be encoded as it signifies a HEX escaped character during the decode
process.
2. URI Decoding: Break up URI before decode.
In chan_sip.c ast_uri_decode is called on the entire URI instead of it's
individual parts after it is parsed. This is not good as ast_uri_decode
can introduce special characters back into the URI which can mess up parsing.
This patch resolves this by not decoding a URI until parsing is completely
done. There are many instances where we check to see if pedantic checking
is enabled before we decode a URI. In these cases a new macro,
SIP_PEDANTIC_DECODE, is used on the individual parsed segments of the URI
rather than constantly putting if (pedantic) { decode() } checks everywhere
in the code. In the areas where ast_uri_decode is not dependent upon
pedantic checking this macro is not used, but decoding is still moved to
each individual part of the URI. The only behavior that should change from
this patch is the time at which decoding occurs.
Since I had to look over every place URI parsing occurs to create this
patch, I found several places where we use duplicate code for parsing.
To consolidate the code, those areas have updated to use the parse_uri()
function where possible.
3. SIP display-name decoding according to RFC3261 section 25.
To properly decode the display-name portion of a FROM header, chan_sip's
get_calleridname() function required a complete re-write. More information
about this change can be found in the comments at the beginning of this function.
4. Unit Tests.
Unit tests for ast_uri_encode, ast_uri_decode, and get_calleridname() have been
written. This involved the addition of the test_utils.c file for testing the
utils api.
(closes issue #16299)
Reported by: wdoekes
Patches:
astsvn-16299-get_calleridname.diff uploaded by wdoekes (license 717)
get_calleridname_rewrite.diff uploaded by dvossel (license 671)
Tested by: wdoekes, dvossel, Nick_Lewis
Review: https://reviewboard.asterisk.org/r/469/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@243200 65c4cc65-6c06-0410-ace0-fbb531ad65f3
2010-01-26 16:30:08 +00:00
res = AST_TEST_FAIL ;
}
/* Verify uri decode matches original */
ast_uri_decode ( out ) ;
if ( strcmp ( in , out ) ) {
Various updates to the unit test API.
1) It occurred to me that the difference in usage between the error ast_str and
the ast_test_update_status() usage has turned out to be a bit ambiguous in
practice. In a lot of cases, the same message was being sent to both.
In other cases, it was only sent to one or the other. My opinion now is that
in every case, I think it makes sense to do both; we should output it to the
CLI as well as save it off for logging purposes.
This change results in most of the changes in this diff, since it required
changes to all existing unit tests. It also allowed for some simplifications
of unit test API implementation code.
2) Update ast_test_status_update() to include the file, function, and line
number for the code providing the update.
3) There are some formatting tweaks here and there. Hopefully they aren't too
distracting for code review purposes. Reviewboard's diff viewer seems to do a
pretty good job of pointing out when something is a whitespace change.
4) I moved the md5_test and sha1_test into the test_utils module. It seemed
like a better approach since these tests are so tiny.
5) I changed the number of nodes used in heap_test_2 from 1 million to
100 thousand. The only reason for this was to reduce the time it took
for this test to run.
6) Remove an unused function prototype that was at the bottom of utils.h.
7) Simplify test_insert() using the LIST_INSERT_SORTALPHA() macro. The one
minor difference in behavior is that it no longer checks for a test registered
with the same name.
8) Expand the code in test_alloc() to provide specific error messages for each
failure case, to clearly inform developers if they forget to set the name,
summary, description, etc.
9) Tweak the output of the "test show registered" CLI command. I swapped the
name and category to have the category first. It seemed more natural since
that is the sort key.
10) Don't output the status ast_str in the "test show results" CLI command.
This is going to tend to be pretty verbose, so just leave that for the
detailed test logs (test generate results).
Review: https://reviewboard.asterisk.org/r/493/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@245864 65c4cc65-6c06-0410-ace0-fbb531ad65f3
2010-02-09 23:32:14 +00:00
ast_test_status_update ( test , " Decoded string did not match original input \n " ) ;
RFC compliant uri and display-name encode/decode
1. URI Encoding
This patch changes ast_uri_encode()'s behavior when doreserved is enabled.
Previously when doreserved was enabled only a small set of reserved
characters were encoded. This set was comprised primarily of the reserved
characters defined in RFC3261 section 25.1, but contained other characters as
well. Rather than only escaping the reserved set, doreserved now escapes
all characters not within the unreserved set as defined by RFC 3261 and
RFC 2396. Also, the 'doreserved' variable has been renamed to 'do_special_char'
in attempts to avoid confusion.
When doreserve is not enabled, the previous logic of only encoding the
characters <= 0X1F and > 0X7f remains, except for the '%' character, which
must always be encoded as it signifies a HEX escaped character during the decode
process.
2. URI Decoding: Break up URI before decode.
In chan_sip.c ast_uri_decode is called on the entire URI instead of it's
individual parts after it is parsed. This is not good as ast_uri_decode
can introduce special characters back into the URI which can mess up parsing.
This patch resolves this by not decoding a URI until parsing is completely
done. There are many instances where we check to see if pedantic checking
is enabled before we decode a URI. In these cases a new macro,
SIP_PEDANTIC_DECODE, is used on the individual parsed segments of the URI
rather than constantly putting if (pedantic) { decode() } checks everywhere
in the code. In the areas where ast_uri_decode is not dependent upon
pedantic checking this macro is not used, but decoding is still moved to
each individual part of the URI. The only behavior that should change from
this patch is the time at which decoding occurs.
Since I had to look over every place URI parsing occurs to create this
patch, I found several places where we use duplicate code for parsing.
To consolidate the code, those areas have updated to use the parse_uri()
function where possible.
3. SIP display-name decoding according to RFC3261 section 25.
To properly decode the display-name portion of a FROM header, chan_sip's
get_calleridname() function required a complete re-write. More information
about this change can be found in the comments at the beginning of this function.
4. Unit Tests.
Unit tests for ast_uri_encode, ast_uri_decode, and get_calleridname() have been
written. This involved the addition of the test_utils.c file for testing the
utils api.
(closes issue #16299)
Reported by: wdoekes
Patches:
astsvn-16299-get_calleridname.diff uploaded by wdoekes (license 717)
get_calleridname_rewrite.diff uploaded by dvossel (license 671)
Tested by: wdoekes, dvossel, Nick_Lewis
Review: https://reviewboard.asterisk.org/r/469/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@243200 65c4cc65-6c06-0410-ace0-fbb531ad65f3
2010-01-26 16:30:08 +00:00
res = AST_TEST_FAIL ;
} else {
Various updates to the unit test API.
1) It occurred to me that the difference in usage between the error ast_str and
the ast_test_update_status() usage has turned out to be a bit ambiguous in
practice. In a lot of cases, the same message was being sent to both.
In other cases, it was only sent to one or the other. My opinion now is that
in every case, I think it makes sense to do both; we should output it to the
CLI as well as save it off for logging purposes.
This change results in most of the changes in this diff, since it required
changes to all existing unit tests. It also allowed for some simplifications
of unit test API implementation code.
2) Update ast_test_status_update() to include the file, function, and line
number for the code providing the update.
3) There are some formatting tweaks here and there. Hopefully they aren't too
distracting for code review purposes. Reviewboard's diff viewer seems to do a
pretty good job of pointing out when something is a whitespace change.
4) I moved the md5_test and sha1_test into the test_utils module. It seemed
like a better approach since these tests are so tiny.
5) I changed the number of nodes used in heap_test_2 from 1 million to
100 thousand. The only reason for this was to reduce the time it took
for this test to run.
6) Remove an unused function prototype that was at the bottom of utils.h.
7) Simplify test_insert() using the LIST_INSERT_SORTALPHA() macro. The one
minor difference in behavior is that it no longer checks for a test registered
with the same name.
8) Expand the code in test_alloc() to provide specific error messages for each
failure case, to clearly inform developers if they forget to set the name,
summary, description, etc.
9) Tweak the output of the "test show registered" CLI command. I swapped the
name and category to have the category first. It seemed more natural since
that is the sort key.
10) Don't output the status ast_str in the "test show results" CLI command.
This is going to tend to be pretty verbose, so just leave that for the
detailed test logs (test generate results).
Review: https://reviewboard.asterisk.org/r/493/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@245864 65c4cc65-6c06-0410-ace0-fbb531ad65f3
2010-02-09 23:32:14 +00:00
ast_test_status_update ( test , " Decoded string matched original input \n " ) ;
}
return res ;
}
AST_TEST_DEFINE ( md5_test )
{
static const struct {
const char * input ;
const char * expected_output ;
} tests [ ] = {
{ " apples " , " daeccf0ad3c1fc8c8015205c332f5b42 " } ,
{ " bananas " , " ec121ff80513ae58ed478d5c5787075b " } ,
{ " reallylongstringaboutgoatcheese " , " 0a2d9280d37e2e37545cfef6e7e4e890 " } ,
} ;
enum ast_test_result_state res = AST_TEST_PASS ;
int i ;
switch ( cmd ) {
case TEST_INIT :
info - > name = " md5_test " ;
2010-07-09 17:00:22 +00:00
info - > category = " /main/utils/ " ;
Various updates to the unit test API.
1) It occurred to me that the difference in usage between the error ast_str and
the ast_test_update_status() usage has turned out to be a bit ambiguous in
practice. In a lot of cases, the same message was being sent to both.
In other cases, it was only sent to one or the other. My opinion now is that
in every case, I think it makes sense to do both; we should output it to the
CLI as well as save it off for logging purposes.
This change results in most of the changes in this diff, since it required
changes to all existing unit tests. It also allowed for some simplifications
of unit test API implementation code.
2) Update ast_test_status_update() to include the file, function, and line
number for the code providing the update.
3) There are some formatting tweaks here and there. Hopefully they aren't too
distracting for code review purposes. Reviewboard's diff viewer seems to do a
pretty good job of pointing out when something is a whitespace change.
4) I moved the md5_test and sha1_test into the test_utils module. It seemed
like a better approach since these tests are so tiny.
5) I changed the number of nodes used in heap_test_2 from 1 million to
100 thousand. The only reason for this was to reduce the time it took
for this test to run.
6) Remove an unused function prototype that was at the bottom of utils.h.
7) Simplify test_insert() using the LIST_INSERT_SORTALPHA() macro. The one
minor difference in behavior is that it no longer checks for a test registered
with the same name.
8) Expand the code in test_alloc() to provide specific error messages for each
failure case, to clearly inform developers if they forget to set the name,
summary, description, etc.
9) Tweak the output of the "test show registered" CLI command. I swapped the
name and category to have the category first. It seemed more natural since
that is the sort key.
10) Don't output the status ast_str in the "test show results" CLI command.
This is going to tend to be pretty verbose, so just leave that for the
detailed test logs (test generate results).
Review: https://reviewboard.asterisk.org/r/493/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@245864 65c4cc65-6c06-0410-ace0-fbb531ad65f3
2010-02-09 23:32:14 +00:00
info - > summary = " MD5 test " ;
info - > description =
" This test exercises MD5 calculations. "
" " ;
return AST_TEST_NOT_RUN ;
case TEST_EXECUTE :
break ;
}
ast_test_status_update ( test , " Testing MD5 ... \n " ) ;
for ( i = 0 ; i < ARRAY_LEN ( tests ) ; i + + ) {
char md5_hash [ 32 ] ;
ast_md5_hash ( md5_hash , tests [ i ] . input ) ;
if ( strcasecmp ( md5_hash , tests [ i ] . expected_output ) ) {
ast_test_status_update ( test ,
" input: '%s' hash: '%s' expected hash: '%s' \n " ,
tests [ i ] . input , md5_hash , tests [ i ] . expected_output ) ;
res = AST_TEST_FAIL ;
}
RFC compliant uri and display-name encode/decode
1. URI Encoding
This patch changes ast_uri_encode()'s behavior when doreserved is enabled.
Previously when doreserved was enabled only a small set of reserved
characters were encoded. This set was comprised primarily of the reserved
characters defined in RFC3261 section 25.1, but contained other characters as
well. Rather than only escaping the reserved set, doreserved now escapes
all characters not within the unreserved set as defined by RFC 3261 and
RFC 2396. Also, the 'doreserved' variable has been renamed to 'do_special_char'
in attempts to avoid confusion.
When doreserve is not enabled, the previous logic of only encoding the
characters <= 0X1F and > 0X7f remains, except for the '%' character, which
must always be encoded as it signifies a HEX escaped character during the decode
process.
2. URI Decoding: Break up URI before decode.
In chan_sip.c ast_uri_decode is called on the entire URI instead of it's
individual parts after it is parsed. This is not good as ast_uri_decode
can introduce special characters back into the URI which can mess up parsing.
This patch resolves this by not decoding a URI until parsing is completely
done. There are many instances where we check to see if pedantic checking
is enabled before we decode a URI. In these cases a new macro,
SIP_PEDANTIC_DECODE, is used on the individual parsed segments of the URI
rather than constantly putting if (pedantic) { decode() } checks everywhere
in the code. In the areas where ast_uri_decode is not dependent upon
pedantic checking this macro is not used, but decoding is still moved to
each individual part of the URI. The only behavior that should change from
this patch is the time at which decoding occurs.
Since I had to look over every place URI parsing occurs to create this
patch, I found several places where we use duplicate code for parsing.
To consolidate the code, those areas have updated to use the parse_uri()
function where possible.
3. SIP display-name decoding according to RFC3261 section 25.
To properly decode the display-name portion of a FROM header, chan_sip's
get_calleridname() function required a complete re-write. More information
about this change can be found in the comments at the beginning of this function.
4. Unit Tests.
Unit tests for ast_uri_encode, ast_uri_decode, and get_calleridname() have been
written. This involved the addition of the test_utils.c file for testing the
utils api.
(closes issue #16299)
Reported by: wdoekes
Patches:
astsvn-16299-get_calleridname.diff uploaded by wdoekes (license 717)
get_calleridname_rewrite.diff uploaded by dvossel (license 671)
Tested by: wdoekes, dvossel, Nick_Lewis
Review: https://reviewboard.asterisk.org/r/469/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@243200 65c4cc65-6c06-0410-ace0-fbb531ad65f3
2010-01-26 16:30:08 +00:00
}
Various updates to the unit test API.
1) It occurred to me that the difference in usage between the error ast_str and
the ast_test_update_status() usage has turned out to be a bit ambiguous in
practice. In a lot of cases, the same message was being sent to both.
In other cases, it was only sent to one or the other. My opinion now is that
in every case, I think it makes sense to do both; we should output it to the
CLI as well as save it off for logging purposes.
This change results in most of the changes in this diff, since it required
changes to all existing unit tests. It also allowed for some simplifications
of unit test API implementation code.
2) Update ast_test_status_update() to include the file, function, and line
number for the code providing the update.
3) There are some formatting tweaks here and there. Hopefully they aren't too
distracting for code review purposes. Reviewboard's diff viewer seems to do a
pretty good job of pointing out when something is a whitespace change.
4) I moved the md5_test and sha1_test into the test_utils module. It seemed
like a better approach since these tests are so tiny.
5) I changed the number of nodes used in heap_test_2 from 1 million to
100 thousand. The only reason for this was to reduce the time it took
for this test to run.
6) Remove an unused function prototype that was at the bottom of utils.h.
7) Simplify test_insert() using the LIST_INSERT_SORTALPHA() macro. The one
minor difference in behavior is that it no longer checks for a test registered
with the same name.
8) Expand the code in test_alloc() to provide specific error messages for each
failure case, to clearly inform developers if they forget to set the name,
summary, description, etc.
9) Tweak the output of the "test show registered" CLI command. I swapped the
name and category to have the category first. It seemed more natural since
that is the sort key.
10) Don't output the status ast_str in the "test show results" CLI command.
This is going to tend to be pretty verbose, so just leave that for the
detailed test logs (test generate results).
Review: https://reviewboard.asterisk.org/r/493/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@245864 65c4cc65-6c06-0410-ace0-fbb531ad65f3
2010-02-09 23:32:14 +00:00
return res ;
}
AST_TEST_DEFINE ( sha1_test )
{
static const struct {
const char * input ;
const char * expected_output ;
} tests [ ] = {
{ " giraffe " ,
" fac8f1a31d2998734d6a5253e49876b8e6a08239 " } ,
{ " platypus " ,
" 1dfb21b7a4d35e90d943e3a16107ccbfabd064d5 " } ,
{ " ParastratiosphecomyiaStratiosphecomyioides " ,
" 58af4e8438676f2bd3c4d8df9e00ee7fe06945bb " } ,
} ;
enum ast_test_result_state res = AST_TEST_PASS ;
int i ;
switch ( cmd ) {
case TEST_INIT :
info - > name = " sha1_test " ;
2010-07-09 17:00:22 +00:00
info - > category = " /main/utils/ " ;
Various updates to the unit test API.
1) It occurred to me that the difference in usage between the error ast_str and
the ast_test_update_status() usage has turned out to be a bit ambiguous in
practice. In a lot of cases, the same message was being sent to both.
In other cases, it was only sent to one or the other. My opinion now is that
in every case, I think it makes sense to do both; we should output it to the
CLI as well as save it off for logging purposes.
This change results in most of the changes in this diff, since it required
changes to all existing unit tests. It also allowed for some simplifications
of unit test API implementation code.
2) Update ast_test_status_update() to include the file, function, and line
number for the code providing the update.
3) There are some formatting tweaks here and there. Hopefully they aren't too
distracting for code review purposes. Reviewboard's diff viewer seems to do a
pretty good job of pointing out when something is a whitespace change.
4) I moved the md5_test and sha1_test into the test_utils module. It seemed
like a better approach since these tests are so tiny.
5) I changed the number of nodes used in heap_test_2 from 1 million to
100 thousand. The only reason for this was to reduce the time it took
for this test to run.
6) Remove an unused function prototype that was at the bottom of utils.h.
7) Simplify test_insert() using the LIST_INSERT_SORTALPHA() macro. The one
minor difference in behavior is that it no longer checks for a test registered
with the same name.
8) Expand the code in test_alloc() to provide specific error messages for each
failure case, to clearly inform developers if they forget to set the name,
summary, description, etc.
9) Tweak the output of the "test show registered" CLI command. I swapped the
name and category to have the category first. It seemed more natural since
that is the sort key.
10) Don't output the status ast_str in the "test show results" CLI command.
This is going to tend to be pretty verbose, so just leave that for the
detailed test logs (test generate results).
Review: https://reviewboard.asterisk.org/r/493/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@245864 65c4cc65-6c06-0410-ace0-fbb531ad65f3
2010-02-09 23:32:14 +00:00
info - > summary = " SHA1 test " ;
info - > description =
" This test exercises SHA1 calculations. "
" " ;
return AST_TEST_NOT_RUN ;
case TEST_EXECUTE :
break ;
}
ast_test_status_update ( test , " Testing SHA1 ... \n " ) ;
for ( i = 0 ; i < ARRAY_LEN ( tests ) ; i + + ) {
char sha1_hash [ 64 ] ;
ast_sha1_hash ( sha1_hash , tests [ i ] . input ) ;
if ( strcasecmp ( sha1_hash , tests [ i ] . expected_output ) ) {
ast_test_status_update ( test ,
" input: '%s' hash: '%s' expected hash: '%s' \n " ,
tests [ i ] . input , sha1_hash , tests [ i ] . expected_output ) ;
res = AST_TEST_FAIL ;
}
}
RFC compliant uri and display-name encode/decode
1. URI Encoding
This patch changes ast_uri_encode()'s behavior when doreserved is enabled.
Previously when doreserved was enabled only a small set of reserved
characters were encoded. This set was comprised primarily of the reserved
characters defined in RFC3261 section 25.1, but contained other characters as
well. Rather than only escaping the reserved set, doreserved now escapes
all characters not within the unreserved set as defined by RFC 3261 and
RFC 2396. Also, the 'doreserved' variable has been renamed to 'do_special_char'
in attempts to avoid confusion.
When doreserve is not enabled, the previous logic of only encoding the
characters <= 0X1F and > 0X7f remains, except for the '%' character, which
must always be encoded as it signifies a HEX escaped character during the decode
process.
2. URI Decoding: Break up URI before decode.
In chan_sip.c ast_uri_decode is called on the entire URI instead of it's
individual parts after it is parsed. This is not good as ast_uri_decode
can introduce special characters back into the URI which can mess up parsing.
This patch resolves this by not decoding a URI until parsing is completely
done. There are many instances where we check to see if pedantic checking
is enabled before we decode a URI. In these cases a new macro,
SIP_PEDANTIC_DECODE, is used on the individual parsed segments of the URI
rather than constantly putting if (pedantic) { decode() } checks everywhere
in the code. In the areas where ast_uri_decode is not dependent upon
pedantic checking this macro is not used, but decoding is still moved to
each individual part of the URI. The only behavior that should change from
this patch is the time at which decoding occurs.
Since I had to look over every place URI parsing occurs to create this
patch, I found several places where we use duplicate code for parsing.
To consolidate the code, those areas have updated to use the parse_uri()
function where possible.
3. SIP display-name decoding according to RFC3261 section 25.
To properly decode the display-name portion of a FROM header, chan_sip's
get_calleridname() function required a complete re-write. More information
about this change can be found in the comments at the beginning of this function.
4. Unit Tests.
Unit tests for ast_uri_encode, ast_uri_decode, and get_calleridname() have been
written. This involved the addition of the test_utils.c file for testing the
utils api.
(closes issue #16299)
Reported by: wdoekes
Patches:
astsvn-16299-get_calleridname.diff uploaded by wdoekes (license 717)
get_calleridname_rewrite.diff uploaded by dvossel (license 671)
Tested by: wdoekes, dvossel, Nick_Lewis
Review: https://reviewboard.asterisk.org/r/469/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@243200 65c4cc65-6c06-0410-ace0-fbb531ad65f3
2010-01-26 16:30:08 +00:00
return res ;
}
2010-03-02 23:38:29 +00:00
AST_TEST_DEFINE ( base64_test )
{
static const struct {
const char * input ;
const char * decoded ;
} tests [ ] = {
{ " giraffe " ,
" Z2lyYWZmZQ== " } ,
{ " platypus " ,
" cGxhdHlwdXM= " } ,
{ " ParastratiosphecomyiaStratiosphecomyioides " ,
" UGFyYXN0cmF0aW9zcGhlY29teWlhU3RyYXRpb3NwaGVjb215aW9pZGVz " } ,
} ;
int i ;
enum ast_test_result_state res = AST_TEST_PASS ;
switch ( cmd ) {
case TEST_INIT :
info - > name = " base64_test " ;
2010-07-09 17:00:22 +00:00
info - > category = " /main/utils/ " ;
2010-03-02 23:38:29 +00:00
info - > summary = " base64 test " ;
info - > description = " This test exercises the base64 conversions. " ;
return AST_TEST_NOT_RUN ;
case TEST_EXECUTE :
break ;
}
for ( i = 0 ; i < ARRAY_LEN ( tests ) ; i + + ) {
char tmp [ 64 ] ;
ast_base64encode ( tmp , ( unsigned char * ) tests [ i ] . input , strlen ( tests [ i ] . input ) , sizeof ( tmp ) ) ;
if ( strcasecmp ( tmp , tests [ i ] . decoded ) ) {
ast_test_status_update ( test ,
" input: '%s' base64 output: '%s' expected base64 output: '%s' \n " ,
tests [ i ] . input , tmp , tests [ i ] . decoded ) ;
res = AST_TEST_FAIL ;
}
memset ( tmp , 0 , sizeof ( tmp ) ) ;
ast_base64decode ( ( unsigned char * ) tmp , tests [ i ] . decoded , ( sizeof ( tmp ) - 1 ) ) ;
if ( strcasecmp ( tmp , tests [ i ] . input ) ) {
ast_test_status_update ( test ,
" base64 input: '%s' output: '%s' expected output: '%s' \n " ,
tests [ i ] . decoded , tmp , tests [ i ] . input ) ;
res = AST_TEST_FAIL ;
}
}
return res ;
}
2010-07-14 20:48:59 +00:00
AST_TEST_DEFINE ( crypto_loaded_test )
{
switch ( cmd ) {
case TEST_INIT :
info - > name = " crypto_loaded_test " ;
info - > category = " /res/crypto/ " ;
info - > summary = " Crypto loaded into memory " ;
info - > description = " Verifies whether the crypto functions overrode the stubs " ;
return AST_TEST_NOT_RUN ;
case TEST_EXECUTE :
break ;
}
2010-09-28 18:20:20 +00:00
#if 0 /* Not defined on Solaris */
2010-07-14 20:48:59 +00:00
ast_test_status_update ( test ,
" address of __stub__ast_crypto_loaded is %p \n " ,
__stub__ast_crypto_loaded ) ;
2010-07-16 04:23:02 +00:00
# ifndef HAVE_ATTRIBUTE_weak_import
2010-07-14 20:48:59 +00:00
ast_test_status_update ( test ,
" address of __ref__ast_crypto_loaded is %p \n " ,
__ref__ast_crypto_loaded ) ;
2010-07-16 04:23:02 +00:00
# endif
2010-07-14 20:48:59 +00:00
ast_test_status_update ( test ,
" pointer to ast_crypto_loaded is %p \n " ,
ast_crypto_loaded ) ;
2010-09-28 18:20:20 +00:00
# endif
2010-07-14 20:48:59 +00:00
return ast_crypto_loaded ( ) ? AST_TEST_PASS : AST_TEST_FAIL ;
}
AST_TEST_DEFINE ( adsi_loaded_test )
{
struct ast_channel c = { . adsicpe = AST_ADSI_AVAILABLE , } ;
switch ( cmd ) {
case TEST_INIT :
info - > name = " adsi_loaded_test " ;
info - > category = " /res/adsi/ " ;
info - > summary = " ADSI loaded into memory " ;
info - > description = " Verifies whether the adsi functions overrode the stubs " ;
return AST_TEST_NOT_RUN ;
case TEST_EXECUTE :
break ;
}
return ast_adsi_available ( & c ) ? AST_TEST_PASS : AST_TEST_FAIL ;
}
static int handle_noop ( struct ast_channel * chan , AGI * agi , int arg , const char * const argv [ ] )
{
ast_agi_send ( agi - > fd , chan , " 200 result=0 \n " ) ;
return RESULT_SUCCESS ;
}
AST_TEST_DEFINE ( agi_loaded_test )
{
int res = AST_TEST_PASS ;
struct agi_command noop_command =
{ { " testnoop " , NULL } , handle_noop , NULL , NULL , 0 } ;
switch ( cmd ) {
case TEST_INIT :
info - > name = " agi_loaded_test " ;
info - > category = " /res/agi/ " ;
info - > summary = " AGI loaded into memory " ;
info - > description = " Verifies whether the agi functions overrode the stubs " ;
return AST_TEST_NOT_RUN ;
case TEST_EXECUTE :
break ;
}
2010-09-28 18:20:20 +00:00
#if 0
2010-07-14 20:48:59 +00:00
ast_test_status_update ( test ,
" address of __stub__ast_agi_register is %p \n " ,
__stub__ast_agi_register ) ;
2010-07-16 04:23:02 +00:00
# ifndef HAVE_ATTRIBUTE_weak_import
2010-07-14 20:48:59 +00:00
ast_test_status_update ( test ,
" address of __ref__ast_agi_register is %p \n " ,
__ref__ast_agi_register ) ;
2010-07-16 04:23:02 +00:00
# endif
2010-07-14 20:48:59 +00:00
ast_test_status_update ( test ,
" pointer to ast_agi_register is %p \n " ,
ast_agi_register ) ;
2010-09-28 18:20:20 +00:00
# endif
2010-07-14 20:48:59 +00:00
if ( ast_agi_register ( ast_module_info - > self , & noop_command ) = = AST_OPTIONAL_API_UNAVAILABLE ) {
2010-09-30 20:40:08 +00:00
ast_test_status_update ( test , " Unable to register testnoop command, because res_agi is not loaded. \n " ) ;
2010-07-14 20:48:59 +00:00
return AST_TEST_FAIL ;
}
# ifndef HAVE_NULLSAFE_PRINTF
/* Test for condition without actually crashing Asterisk */
if ( noop_command . usage = = NULL ) {
2010-09-30 20:40:08 +00:00
ast_test_status_update ( test , " AGI testnoop usage was not updated properly. \n " ) ;
2010-07-14 20:48:59 +00:00
res = AST_TEST_FAIL ;
}
if ( noop_command . syntax = = NULL ) {
2010-09-30 20:40:08 +00:00
ast_test_status_update ( test , " AGI testnoop syntax was not updated properly. \n " ) ;
2010-07-14 20:48:59 +00:00
res = AST_TEST_FAIL ;
}
# endif
ast_agi_unregister ( ast_module_info - > self , & noop_command ) ;
return res ;
}
2010-03-02 23:38:29 +00:00
RFC compliant uri and display-name encode/decode
1. URI Encoding
This patch changes ast_uri_encode()'s behavior when doreserved is enabled.
Previously when doreserved was enabled only a small set of reserved
characters were encoded. This set was comprised primarily of the reserved
characters defined in RFC3261 section 25.1, but contained other characters as
well. Rather than only escaping the reserved set, doreserved now escapes
all characters not within the unreserved set as defined by RFC 3261 and
RFC 2396. Also, the 'doreserved' variable has been renamed to 'do_special_char'
in attempts to avoid confusion.
When doreserve is not enabled, the previous logic of only encoding the
characters <= 0X1F and > 0X7f remains, except for the '%' character, which
must always be encoded as it signifies a HEX escaped character during the decode
process.
2. URI Decoding: Break up URI before decode.
In chan_sip.c ast_uri_decode is called on the entire URI instead of it's
individual parts after it is parsed. This is not good as ast_uri_decode
can introduce special characters back into the URI which can mess up parsing.
This patch resolves this by not decoding a URI until parsing is completely
done. There are many instances where we check to see if pedantic checking
is enabled before we decode a URI. In these cases a new macro,
SIP_PEDANTIC_DECODE, is used on the individual parsed segments of the URI
rather than constantly putting if (pedantic) { decode() } checks everywhere
in the code. In the areas where ast_uri_decode is not dependent upon
pedantic checking this macro is not used, but decoding is still moved to
each individual part of the URI. The only behavior that should change from
this patch is the time at which decoding occurs.
Since I had to look over every place URI parsing occurs to create this
patch, I found several places where we use duplicate code for parsing.
To consolidate the code, those areas have updated to use the parse_uri()
function where possible.
3. SIP display-name decoding according to RFC3261 section 25.
To properly decode the display-name portion of a FROM header, chan_sip's
get_calleridname() function required a complete re-write. More information
about this change can be found in the comments at the beginning of this function.
4. Unit Tests.
Unit tests for ast_uri_encode, ast_uri_decode, and get_calleridname() have been
written. This involved the addition of the test_utils.c file for testing the
utils api.
(closes issue #16299)
Reported by: wdoekes
Patches:
astsvn-16299-get_calleridname.diff uploaded by wdoekes (license 717)
get_calleridname_rewrite.diff uploaded by dvossel (license 671)
Tested by: wdoekes, dvossel, Nick_Lewis
Review: https://reviewboard.asterisk.org/r/469/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@243200 65c4cc65-6c06-0410-ace0-fbb531ad65f3
2010-01-26 16:30:08 +00:00
static int unload_module ( void )
{
2010-02-08 23:34:01 +00:00
AST_TEST_UNREGISTER ( uri_encode_decode_test ) ;
Various updates to the unit test API.
1) It occurred to me that the difference in usage between the error ast_str and
the ast_test_update_status() usage has turned out to be a bit ambiguous in
practice. In a lot of cases, the same message was being sent to both.
In other cases, it was only sent to one or the other. My opinion now is that
in every case, I think it makes sense to do both; we should output it to the
CLI as well as save it off for logging purposes.
This change results in most of the changes in this diff, since it required
changes to all existing unit tests. It also allowed for some simplifications
of unit test API implementation code.
2) Update ast_test_status_update() to include the file, function, and line
number for the code providing the update.
3) There are some formatting tweaks here and there. Hopefully they aren't too
distracting for code review purposes. Reviewboard's diff viewer seems to do a
pretty good job of pointing out when something is a whitespace change.
4) I moved the md5_test and sha1_test into the test_utils module. It seemed
like a better approach since these tests are so tiny.
5) I changed the number of nodes used in heap_test_2 from 1 million to
100 thousand. The only reason for this was to reduce the time it took
for this test to run.
6) Remove an unused function prototype that was at the bottom of utils.h.
7) Simplify test_insert() using the LIST_INSERT_SORTALPHA() macro. The one
minor difference in behavior is that it no longer checks for a test registered
with the same name.
8) Expand the code in test_alloc() to provide specific error messages for each
failure case, to clearly inform developers if they forget to set the name,
summary, description, etc.
9) Tweak the output of the "test show registered" CLI command. I swapped the
name and category to have the category first. It seemed more natural since
that is the sort key.
10) Don't output the status ast_str in the "test show results" CLI command.
This is going to tend to be pretty verbose, so just leave that for the
detailed test logs (test generate results).
Review: https://reviewboard.asterisk.org/r/493/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@245864 65c4cc65-6c06-0410-ace0-fbb531ad65f3
2010-02-09 23:32:14 +00:00
AST_TEST_UNREGISTER ( md5_test ) ;
AST_TEST_UNREGISTER ( sha1_test ) ;
2010-03-02 23:38:29 +00:00
AST_TEST_UNREGISTER ( base64_test ) ;
2010-07-14 20:48:59 +00:00
AST_TEST_UNREGISTER ( crypto_loaded_test ) ;
AST_TEST_UNREGISTER ( adsi_loaded_test ) ;
AST_TEST_UNREGISTER ( agi_loaded_test ) ;
RFC compliant uri and display-name encode/decode
1. URI Encoding
This patch changes ast_uri_encode()'s behavior when doreserved is enabled.
Previously when doreserved was enabled only a small set of reserved
characters were encoded. This set was comprised primarily of the reserved
characters defined in RFC3261 section 25.1, but contained other characters as
well. Rather than only escaping the reserved set, doreserved now escapes
all characters not within the unreserved set as defined by RFC 3261 and
RFC 2396. Also, the 'doreserved' variable has been renamed to 'do_special_char'
in attempts to avoid confusion.
When doreserve is not enabled, the previous logic of only encoding the
characters <= 0X1F and > 0X7f remains, except for the '%' character, which
must always be encoded as it signifies a HEX escaped character during the decode
process.
2. URI Decoding: Break up URI before decode.
In chan_sip.c ast_uri_decode is called on the entire URI instead of it's
individual parts after it is parsed. This is not good as ast_uri_decode
can introduce special characters back into the URI which can mess up parsing.
This patch resolves this by not decoding a URI until parsing is completely
done. There are many instances where we check to see if pedantic checking
is enabled before we decode a URI. In these cases a new macro,
SIP_PEDANTIC_DECODE, is used on the individual parsed segments of the URI
rather than constantly putting if (pedantic) { decode() } checks everywhere
in the code. In the areas where ast_uri_decode is not dependent upon
pedantic checking this macro is not used, but decoding is still moved to
each individual part of the URI. The only behavior that should change from
this patch is the time at which decoding occurs.
Since I had to look over every place URI parsing occurs to create this
patch, I found several places where we use duplicate code for parsing.
To consolidate the code, those areas have updated to use the parse_uri()
function where possible.
3. SIP display-name decoding according to RFC3261 section 25.
To properly decode the display-name portion of a FROM header, chan_sip's
get_calleridname() function required a complete re-write. More information
about this change can be found in the comments at the beginning of this function.
4. Unit Tests.
Unit tests for ast_uri_encode, ast_uri_decode, and get_calleridname() have been
written. This involved the addition of the test_utils.c file for testing the
utils api.
(closes issue #16299)
Reported by: wdoekes
Patches:
astsvn-16299-get_calleridname.diff uploaded by wdoekes (license 717)
get_calleridname_rewrite.diff uploaded by dvossel (license 671)
Tested by: wdoekes, dvossel, Nick_Lewis
Review: https://reviewboard.asterisk.org/r/469/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@243200 65c4cc65-6c06-0410-ace0-fbb531ad65f3
2010-01-26 16:30:08 +00:00
return 0 ;
}
static int load_module ( void )
{
AST_TEST_REGISTER ( uri_encode_decode_test ) ;
Various updates to the unit test API.
1) It occurred to me that the difference in usage between the error ast_str and
the ast_test_update_status() usage has turned out to be a bit ambiguous in
practice. In a lot of cases, the same message was being sent to both.
In other cases, it was only sent to one or the other. My opinion now is that
in every case, I think it makes sense to do both; we should output it to the
CLI as well as save it off for logging purposes.
This change results in most of the changes in this diff, since it required
changes to all existing unit tests. It also allowed for some simplifications
of unit test API implementation code.
2) Update ast_test_status_update() to include the file, function, and line
number for the code providing the update.
3) There are some formatting tweaks here and there. Hopefully they aren't too
distracting for code review purposes. Reviewboard's diff viewer seems to do a
pretty good job of pointing out when something is a whitespace change.
4) I moved the md5_test and sha1_test into the test_utils module. It seemed
like a better approach since these tests are so tiny.
5) I changed the number of nodes used in heap_test_2 from 1 million to
100 thousand. The only reason for this was to reduce the time it took
for this test to run.
6) Remove an unused function prototype that was at the bottom of utils.h.
7) Simplify test_insert() using the LIST_INSERT_SORTALPHA() macro. The one
minor difference in behavior is that it no longer checks for a test registered
with the same name.
8) Expand the code in test_alloc() to provide specific error messages for each
failure case, to clearly inform developers if they forget to set the name,
summary, description, etc.
9) Tweak the output of the "test show registered" CLI command. I swapped the
name and category to have the category first. It seemed more natural since
that is the sort key.
10) Don't output the status ast_str in the "test show results" CLI command.
This is going to tend to be pretty verbose, so just leave that for the
detailed test logs (test generate results).
Review: https://reviewboard.asterisk.org/r/493/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@245864 65c4cc65-6c06-0410-ace0-fbb531ad65f3
2010-02-09 23:32:14 +00:00
AST_TEST_REGISTER ( md5_test ) ;
AST_TEST_REGISTER ( sha1_test ) ;
2010-03-02 23:38:29 +00:00
AST_TEST_REGISTER ( base64_test ) ;
2010-07-14 20:48:59 +00:00
AST_TEST_REGISTER ( crypto_loaded_test ) ;
AST_TEST_REGISTER ( adsi_loaded_test ) ;
AST_TEST_REGISTER ( agi_loaded_test ) ;
RFC compliant uri and display-name encode/decode
1. URI Encoding
This patch changes ast_uri_encode()'s behavior when doreserved is enabled.
Previously when doreserved was enabled only a small set of reserved
characters were encoded. This set was comprised primarily of the reserved
characters defined in RFC3261 section 25.1, but contained other characters as
well. Rather than only escaping the reserved set, doreserved now escapes
all characters not within the unreserved set as defined by RFC 3261 and
RFC 2396. Also, the 'doreserved' variable has been renamed to 'do_special_char'
in attempts to avoid confusion.
When doreserve is not enabled, the previous logic of only encoding the
characters <= 0X1F and > 0X7f remains, except for the '%' character, which
must always be encoded as it signifies a HEX escaped character during the decode
process.
2. URI Decoding: Break up URI before decode.
In chan_sip.c ast_uri_decode is called on the entire URI instead of it's
individual parts after it is parsed. This is not good as ast_uri_decode
can introduce special characters back into the URI which can mess up parsing.
This patch resolves this by not decoding a URI until parsing is completely
done. There are many instances where we check to see if pedantic checking
is enabled before we decode a URI. In these cases a new macro,
SIP_PEDANTIC_DECODE, is used on the individual parsed segments of the URI
rather than constantly putting if (pedantic) { decode() } checks everywhere
in the code. In the areas where ast_uri_decode is not dependent upon
pedantic checking this macro is not used, but decoding is still moved to
each individual part of the URI. The only behavior that should change from
this patch is the time at which decoding occurs.
Since I had to look over every place URI parsing occurs to create this
patch, I found several places where we use duplicate code for parsing.
To consolidate the code, those areas have updated to use the parse_uri()
function where possible.
3. SIP display-name decoding according to RFC3261 section 25.
To properly decode the display-name portion of a FROM header, chan_sip's
get_calleridname() function required a complete re-write. More information
about this change can be found in the comments at the beginning of this function.
4. Unit Tests.
Unit tests for ast_uri_encode, ast_uri_decode, and get_calleridname() have been
written. This involved the addition of the test_utils.c file for testing the
utils api.
(closes issue #16299)
Reported by: wdoekes
Patches:
astsvn-16299-get_calleridname.diff uploaded by wdoekes (license 717)
get_calleridname_rewrite.diff uploaded by dvossel (license 671)
Tested by: wdoekes, dvossel, Nick_Lewis
Review: https://reviewboard.asterisk.org/r/469/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@243200 65c4cc65-6c06-0410-ace0-fbb531ad65f3
2010-01-26 16:30:08 +00:00
return AST_MODULE_LOAD_SUCCESS ;
}
AST_MODULE_INFO_STANDARD ( ASTERISK_GPL_KEY , " Utils test module " ) ;