2001-12-27 11:07:33 +00:00
/*
2005-09-14 20:46:50 +00:00
* Asterisk - - An open source telephony toolkit .
2001-12-27 11:07:33 +00:00
*
2008-01-23 23:09:11 +00:00
* Copyright ( C ) 1999 - 2008 , Digium , Inc .
2001-12-27 11:07:33 +00:00
*
2004-08-31 13:32:11 +00:00
* Mark Spencer < markster @ digium . com >
2001-12-27 11:07:33 +00:00
*
2005-09-14 20:46:50 +00:00
* See http : //www.asterisk.org for more information about
* the Asterisk project . Please do not directly contact
* any of the maintainers of this project for assistance ;
* the project provides a web site , mailing lists and IRC
* channels for your use .
*
2001-12-27 11:07:33 +00:00
* This program is free software , distributed under the terms of
2005-09-14 20:46:50 +00:00
* the GNU General Public License Version 2. See the LICENSE file
* at the top of the source tree .
*/
2005-10-24 20:12:06 +00:00
/*! \file
2005-09-14 20:46:50 +00:00
*
2006-01-19 22:09:18 +00:00
* \ brief Routines implementing call features as call pickup , parking and transfer
2005-12-30 21:18:06 +00:00
*
* \ author Mark Spencer < markster @ digium . com >
2001-12-27 11:07:33 +00:00
*/
2006-06-07 18:54:56 +00:00
# include "asterisk.h"
ASTERISK_FILE_VERSION ( __FILE__ , " $Revision$ " )
2008-01-23 23:09:11 +00:00
# include "asterisk/_private.h"
2005-06-06 22:12:19 +00:00
# include <pthread.h>
# include <sys/time.h>
# include <sys/signal.h>
# include <netinet/in.h>
2005-04-21 06:02:45 +00:00
# include "asterisk/lock.h"
# include "asterisk/file.h"
# include "asterisk/channel.h"
# include "asterisk/pbx.h"
2005-06-23 22:12:01 +00:00
# include "asterisk/causes.h"
2005-04-21 06:02:45 +00:00
# include "asterisk/module.h"
# include "asterisk/translate.h"
# include "asterisk/app.h"
# include "asterisk/say.h"
# include "asterisk/features.h"
# include "asterisk/musiconhold.h"
# include "asterisk/config.h"
# include "asterisk/cli.h"
# include "asterisk/manager.h"
# include "asterisk/utils.h"
# include "asterisk/adsi.h"
METERMAIDS:
-----------
- Adding devicestate providers, a new architecture to add non-channel related
device state information, like parking lots, queues, meetmes, vending machines
and Windows 98 reboots (lots of blinking on those lights)
- Adding provider for parking lots, so you can subscribe to the status of a
parking lot
- Adding provider for meetme, so you can have a blinking lamp for a meetme
( Example: exten => edvina,hint,meetme:1234 )
- Adding support for directed parking - set the PARKINGEXTEN before you manually
call Park() and you will be parked on that space. If it's occupied, dialplan
execution will continue.
This work was sponsored by Voop A/S - www.voop.com
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@36055 65c4cc65-6c06-0410-ace0-fbb531ad65f3
2006-06-26 16:43:21 +00:00
# include "asterisk/devicestate.h"
2005-11-08 04:02:35 +00:00
# include "asterisk/monitor.h"
2007-11-30 21:19:57 +00:00
# include "asterisk/audiohook.h"
2008-03-01 01:30:37 +00:00
# include "asterisk/global_datastores.h"
2008-04-21 23:42:45 +00:00
# include "asterisk/astobj2.h"
2001-12-27 11:07:33 +00:00
2003-02-02 19:37:23 +00:00
# define DEFAULT_PARK_TIME 45000
2004-08-01 01:38:15 +00:00
# define DEFAULT_TRANSFER_DIGIT_TIMEOUT 3000
2005-01-04 04:01:40 +00:00
# define DEFAULT_FEATURE_DIGIT_TIMEOUT 500
2006-05-23 18:23:05 +00:00
# define DEFAULT_NOANSWER_TIMEOUT_ATTENDED_TRANSFER 15000
2008-04-21 23:42:45 +00:00
# define DEFAULT_PARKINGLOT "default" /*!< Default parking lot */
2007-05-01 22:24:51 +00:00
# define DEFAULT_ATXFER_DROP_CALL 0
# define DEFAULT_ATXFER_LOOP_DELAY 10000
# define DEFAULT_ATXFER_CALLBACK_RETRIES 2
2003-02-02 19:37:23 +00:00
2005-06-23 22:12:01 +00:00
# define AST_MAX_WATCHERS 256
2007-05-31 18:21:47 +00:00
struct feature_group_exten {
AST_LIST_ENTRY ( feature_group_exten ) entry ;
AST_DECLARE_STRING_FIELDS (
AST_STRING_FIELD ( exten ) ;
) ;
struct ast_call_feature * feature ;
} ;
struct feature_group {
AST_LIST_ENTRY ( feature_group ) entry ;
AST_DECLARE_STRING_FIELDS (
AST_STRING_FIELD ( gname ) ;
) ;
AST_LIST_HEAD_NOLOCK ( , feature_group_exten ) features ;
} ;
static AST_RWLIST_HEAD_STATIC ( feature_groups , feature_group ) ;
2001-12-27 11:07:33 +00:00
static char * parkedcall = " ParkedCall " ;
2006-06-21 07:49:29 +00:00
static char pickup_ext [ AST_MAX_EXTENSION ] ; /*!< Call pickup extension */
2008-04-21 23:42:45 +00:00
/*! \brief Description of one parked call, added to a list while active, then removed.
The list belongs to a parkinglot
*/
struct parkeduser {
struct ast_channel * chan ; /*!< Parking channel */
struct timeval start ; /*!< Time the parking started */
int parkingnum ; /*!< Parking lot */
char parkingexten [ AST_MAX_EXTENSION ] ; /*!< If set beforehand, parking extension used for this call */
char context [ AST_MAX_CONTEXT ] ; /*!< Where to go if our parking time expires */
char exten [ AST_MAX_EXTENSION ] ;
int priority ;
int parkingtime ; /*!< Maximum length in parking lot before return */
int notquiteyet ;
char peername [ 1024 ] ;
unsigned char moh_trys ;
struct ast_parkinglot * parkinglot ;
AST_LIST_ENTRY ( parkeduser ) list ;
} ;
/*! \brief Structure for parking lots which are put in a container. */
struct ast_parkinglot {
char name [ AST_MAX_CONTEXT ] ;
char parking_con [ AST_MAX_EXTENSION ] ; /*!< Context for which parking is made accessible */
char parking_con_dial [ AST_MAX_EXTENSION ] ; /*!< Context for dialback for parking (KLUDGE) */
int parking_start ; /*!< First available extension for parking */
int parking_stop ; /*!< Last available extension for parking */
int parking_offset ;
int parkfindnext ;
int parkingtime ; /*!< Default parking time */
char mohclass [ MAX_MUSICCLASS ] ; /*!< Music class used for parking */
int parkaddhints ; /*!< Add parking hints automatically */
int parkedcalltransfers ; /*!< Enable DTMF based transfers on bridge when picking up parked calls */
int parkedcallreparking ; /*!< Enable DTMF based parking on bridge when picking up parked calls */
AST_LIST_HEAD ( parkinglot_parklist , parkeduser ) parkings ; /*!< List of active parkings in this parkinglot */
} ;
/*! \brief The list of parking lots configured. Always at least one - the default parking lot */
static struct ao2_container * parkinglots ;
struct ast_parkinglot * default_parkinglot ;
char parking_ext [ AST_MAX_EXTENSION ] ; /*!< Extension you type to park the call */
2006-06-21 07:49:29 +00:00
static char courtesytone [ 256 ] ; /*!< Courtesy tone */
static int parkedplay = 0 ; /*!< Who to play the courtesy tone to */
static char xfersound [ 256 ] ; /*!< Call transfer sound */
static char xferfailsound [ 256 ] ; /*!< Call transfer failure sound */
2001-12-27 11:07:33 +00:00
2005-10-13 23:58:33 +00:00
static int adsipark ;
2004-09-15 19:49:33 +00:00
2005-10-13 23:58:33 +00:00
static int transferdigittimeout ;
static int featuredigittimeout ;
2006-11-01 00:07:37 +00:00
static int comebacktoorigin = 1 ;
2004-08-01 01:38:15 +00:00
2006-05-23 18:23:05 +00:00
static int atxfernoanswertimeout ;
2007-05-01 22:24:51 +00:00
static unsigned int atxferdropcall ;
static unsigned int atxferloopdelay ;
static unsigned int atxfercallbackretries ;
2006-05-23 18:23:05 +00:00
2008-01-23 23:09:11 +00:00
static char * registrar = " features " ; /*!< Registrar for operations */
2001-12-27 11:07:33 +00:00
2006-01-09 09:07:58 +00:00
/* module and CLI command definitions */
2001-12-27 11:07:33 +00:00
static char * synopsis = " Answer a parked call " ;
2007-11-06 19:04:45 +00:00
static char * descrip = " ParkedCall(exten): "
2004-12-28 23:49:46 +00:00
" Used to connect to a parked call. This application is always \n "
2001-12-27 11:07:33 +00:00
" registered internally and does not need to be explicitly added \n "
" into the dialplan, although you should include the 'parkedcalls' \n "
2007-11-13 20:30:13 +00:00
" context. If no extension is provided, then the first available \n "
" parked call will be acquired. \n " ;
2001-12-27 11:07:33 +00:00
2004-08-03 06:31:20 +00:00
static char * parkcall = " Park " ;
static char * synopsis2 = " Park yourself " ;
2008-04-25 18:18:27 +00:00
static char * descrip2 =
" Park([timeout,[return_context,[return_exten,[return_priority,[options]]]]]): "
2004-08-03 06:31:20 +00:00
" Used to park yourself (typically in combination with a supervised \n "
2004-12-28 23:49:46 +00:00
" transfer to know the parking space). This application is always \n "
2004-08-03 06:31:20 +00:00
" registered internally and does not need to be explicitly added \n "
" into the dialplan, although you should include the 'parkedcalls' \n "
METERMAIDS:
-----------
- Adding devicestate providers, a new architecture to add non-channel related
device state information, like parking lots, queues, meetmes, vending machines
and Windows 98 reboots (lots of blinking on those lights)
- Adding provider for parking lots, so you can subscribe to the status of a
parking lot
- Adding provider for meetme, so you can have a blinking lamp for a meetme
( Example: exten => edvina,hint,meetme:1234 )
- Adding support for directed parking - set the PARKINGEXTEN before you manually
call Park() and you will be parked on that space. If it's occupied, dialplan
execution will continue.
This work was sponsored by Voop A/S - www.voop.com
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@36055 65c4cc65-6c06-0410-ace0-fbb531ad65f3
2006-06-26 16:43:21 +00:00
" context (or the context specified in features.conf). \n \n "
" If you set the PARKINGEXTEN variable to an extension in your \n "
2007-11-06 19:04:45 +00:00
" parking context, Park() will park the call on that extension, unless \n "
METERMAIDS:
-----------
- Adding devicestate providers, a new architecture to add non-channel related
device state information, like parking lots, queues, meetmes, vending machines
and Windows 98 reboots (lots of blinking on those lights)
- Adding provider for parking lots, so you can subscribe to the status of a
parking lot
- Adding provider for meetme, so you can have a blinking lamp for a meetme
( Example: exten => edvina,hint,meetme:1234 )
- Adding support for directed parking - set the PARKINGEXTEN before you manually
call Park() and you will be parked on that space. If it's occupied, dialplan
execution will continue.
This work was sponsored by Voop A/S - www.voop.com
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@36055 65c4cc65-6c06-0410-ace0-fbb531ad65f3
2006-06-26 16:43:21 +00:00
" it already exists. In that case, execution will continue at next \n "
2008-04-25 18:18:27 +00:00
" priority. \n "
" This application can accept arguments as well. \n "
" timeout - A custom parking timeout for this parked call. \n "
" return_context - The context to return the call to after it times out. \n "
" return_exten - The extension to return the call to after it times out. \n "
" return_priority - The priority to return the call to after it times out. \n "
" options - A list of options for this parked call. Valid options are: \n "
" 'r' - Send ringing instead of MOH to the parked call. \n "
" 'R' - Randomize the selection of a parking space. \n "
2008-08-29 17:53:32 +00:00
" 's' - Silence announcement of the parking space number. \n "
2008-04-25 18:18:27 +00:00
" " ;
2004-08-03 06:31:20 +00:00
2006-01-09 09:07:58 +00:00
static struct ast_app * monitor_app = NULL ;
static int monitor_ok = 1 ;
2004-09-17 03:49:57 +00:00
2007-11-30 21:19:57 +00:00
static struct ast_app * mixmonitor_app = NULL ;
static int mixmonitor_ok = 1 ;
static struct ast_app * stopmixmonitor_app = NULL ;
static int stopmixmonitor_ok = 1 ;
2008-04-21 23:42:45 +00:00
static pthread_t parking_thread ;
2001-12-27 11:07:33 +00:00
2008-04-21 23:42:45 +00:00
/* Forward declarations */
static struct ast_parkinglot * parkinglot_addref ( struct ast_parkinglot * parkinglot ) ;
static void parkinglot_unref ( struct ast_parkinglot * parkinglot ) ;
static void parkinglot_destroy ( void * obj ) ;
int manage_parkinglot ( struct ast_parkinglot * curlot , fd_set * rfds , fd_set * efds , fd_set * nrfds , fd_set * nefds , int * fs , int * max ) ;
struct ast_parkinglot * find_parkinglot ( const char * name ) ;
2001-12-27 11:07:33 +00:00
2007-06-06 21:08:07 +00:00
const char * ast_parking_ext ( void )
2001-12-27 11:07:33 +00:00
{
return parking_ext ;
}
2007-06-06 21:08:07 +00:00
const char * ast_pickup_ext ( void )
2003-04-09 04:00:43 +00:00
{
return pickup_ext ;
}
2005-01-05 19:56:47 +00:00
struct ast_bridge_thread_obj
{
struct ast_bridge_config bconfig ;
struct ast_channel * chan ;
struct ast_channel * peer ;
Merge changes from team/russell/issue_5841:
This patch adds a "Bridge" Manager action, as well as a "Bridge" dialplan
application. The manager action will allow you to steal two active channels
in the system and bridge them together. Then, the one that did not hang up
will continue in the dialplan. Using the application will bridge the calling
channel to an arbitrary channel in the system. Whichever channel does not
hang up here will continue in the dialplan, as well.
This patch has been touched by a bunch of people over the course of a couple
years. Please forgive me if I have missed your name in the history of things.
The most recent patch came from issue #5841, but there is also a reference to
an earlier version of this patch from issue #4297. The people involved in writing
and/or reviewing the code include at least: twisted, mflorrel, heath1444, davetroy,
tim_ringenbach, moy, tmancill, serge-v, and me. There are also positive test
reports from many people.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@61281 65c4cc65-6c06-0410-ace0-fbb531ad65f3
2007-04-10 20:44:44 +00:00
unsigned int return_to_pbx : 1 ;
2005-01-05 19:56:47 +00:00
} ;
2008-04-21 23:42:45 +00:00
static int parkinglot_hash_cb ( const void * obj , const int flags )
{
const struct ast_parkinglot * parkinglot = obj ;
return ast_str_hash ( parkinglot - > name ) ;
}
2007-03-30 14:37:21 +00:00
2008-04-21 23:42:45 +00:00
static int parkinglot_cmp_cb ( void * obj , void * arg , int flags )
{
struct ast_parkinglot * parkinglot = obj , * parkinglot2 = arg ;
2008-08-29 17:47:17 +00:00
return ! strcasecmp ( parkinglot - > name , parkinglot2 - > name ) ? CMP_MATCH | CMP_STOP : 0 ;
2008-04-21 23:42:45 +00:00
}
2007-03-30 14:37:21 +00:00
2007-08-07 23:04:01 +00:00
/*!
* \ brief store context , extension and priority
* \ param chan , context , ext , pri
*/
2006-04-17 04:31:21 +00:00
static void set_c_e_p ( struct ast_channel * chan , const char * context , const char * ext , int pri )
2006-04-16 18:49:46 +00:00
{
2006-04-17 04:31:21 +00:00
ast_copy_string ( chan - > context , context , sizeof ( chan - > context ) ) ;
2006-04-16 18:49:46 +00:00
ast_copy_string ( chan - > exten , ext , sizeof ( chan - > exten ) ) ;
chan - > priority = pri ;
}
2007-08-07 23:04:01 +00:00
/*!
* \ brief Check goto on transfer
* \ param chan
2007-09-05 16:31:39 +00:00
*
2007-08-07 23:04:01 +00:00
* Check if channel has ' GOTO_ON_BLINDXFR ' set , if not exit .
* When found make sure the types are compatible . Check if channel is valid
* if so start the new channel else hangup the call .
*/
2005-04-22 02:55:14 +00:00
static void check_goto_on_transfer ( struct ast_channel * chan )
{
struct ast_channel * xferchan ;
2005-12-03 19:25:33 +00:00
const char * val = pbx_builtin_getvar_helper ( chan , " GOTO_ON_BLINDXFR " ) ;
char * x , * goto_on_transfer ;
struct ast_frame * f ;
2005-04-22 02:55:14 +00:00
2006-05-10 13:22:15 +00:00
if ( ast_strlen_zero ( val ) )
return ;
goto_on_transfer = ast_strdupa ( val ) ;
2007-04-10 05:41:34 +00:00
if ( ! ( xferchan = ast_channel_alloc ( 0 , AST_STATE_DOWN , 0 , 0 , " " , " " , " " , 0 , chan - > name ) ) )
2006-05-10 13:22:15 +00:00
return ;
for ( x = goto_on_transfer ; x & & * x ; x + + ) {
if ( * x = = ' ^ ' )
* x = ' | ' ;
}
/* Make formats okay */
xferchan - > readformat = chan - > readformat ;
xferchan - > writeformat = chan - > writeformat ;
ast_channel_masquerade ( xferchan , chan ) ;
ast_parseable_goto ( xferchan , goto_on_transfer ) ;
xferchan - > _state = AST_STATE_UP ;
ast_clear_flag ( xferchan , AST_FLAGS_ALL ) ;
xferchan - > _softhangup = 0 ;
if ( ( f = ast_read ( xferchan ) ) ) {
ast_frfree ( f ) ;
f = NULL ;
ast_pbx_start ( xferchan ) ;
} else {
ast_hangup ( xferchan ) ;
2005-04-22 02:55:14 +00:00
}
}
2008-02-27 17:31:31 +00:00
static struct ast_channel * ast_feature_request_and_dial ( struct ast_channel * caller , struct ast_channel * transferee , const char * type , int format , void * data , int timeout , int * outstate , const char * cid_num , const char * cid_name , int igncallerstate , const char * language ) ;
2005-06-23 22:12:01 +00:00
2007-08-07 23:04:01 +00:00
/*!
* \ brief bridge the call
2007-09-05 16:31:39 +00:00
* \ param data thread bridge .
*
2007-08-07 23:04:01 +00:00
* Set Last Data for respective channels , reset cdr for channels
* bridge call , check if we ' re going back to dialplan
* if not hangup both legs of the call
*/
2005-01-05 19:56:47 +00:00
static void * ast_bridge_call_thread ( void * data )
{
struct ast_bridge_thread_obj * tobj = data ;
Merge changes from team/russell/issue_5841:
This patch adds a "Bridge" Manager action, as well as a "Bridge" dialplan
application. The manager action will allow you to steal two active channels
in the system and bridge them together. Then, the one that did not hang up
will continue in the dialplan. Using the application will bridge the calling
channel to an arbitrary channel in the system. Whichever channel does not
hang up here will continue in the dialplan, as well.
This patch has been touched by a bunch of people over the course of a couple
years. Please forgive me if I have missed your name in the history of things.
The most recent patch came from issue #5841, but there is also a reference to
an earlier version of this patch from issue #4297. The people involved in writing
and/or reviewing the code include at least: twisted, mflorrel, heath1444, davetroy,
tim_ringenbach, moy, tmancill, serge-v, and me. There are also positive test
reports from many people.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@61281 65c4cc65-6c06-0410-ace0-fbb531ad65f3
2007-04-10 20:44:44 +00:00
int res ;
2005-11-06 21:00:35 +00:00
Merge changes from team/russell/issue_5841:
This patch adds a "Bridge" Manager action, as well as a "Bridge" dialplan
application. The manager action will allow you to steal two active channels
in the system and bridge them together. Then, the one that did not hang up
will continue in the dialplan. Using the application will bridge the calling
channel to an arbitrary channel in the system. Whichever channel does not
hang up here will continue in the dialplan, as well.
This patch has been touched by a bunch of people over the course of a couple
years. Please forgive me if I have missed your name in the history of things.
The most recent patch came from issue #5841, but there is also a reference to
an earlier version of this patch from issue #4297. The people involved in writing
and/or reviewing the code include at least: twisted, mflorrel, heath1444, davetroy,
tim_ringenbach, moy, tmancill, serge-v, and me. There are also positive test
reports from many people.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@61281 65c4cc65-6c06-0410-ace0-fbb531ad65f3
2007-04-10 20:44:44 +00:00
tobj - > chan - > appl = ! tobj - > return_to_pbx ? " Transferred Call " : " ManagerBridge " ;
2006-04-14 23:20:29 +00:00
tobj - > chan - > data = tobj - > peer - > name ;
Merge changes from team/russell/issue_5841:
This patch adds a "Bridge" Manager action, as well as a "Bridge" dialplan
application. The manager action will allow you to steal two active channels
in the system and bridge them together. Then, the one that did not hang up
will continue in the dialplan. Using the application will bridge the calling
channel to an arbitrary channel in the system. Whichever channel does not
hang up here will continue in the dialplan, as well.
This patch has been touched by a bunch of people over the course of a couple
years. Please forgive me if I have missed your name in the history of things.
The most recent patch came from issue #5841, but there is also a reference to
an earlier version of this patch from issue #4297. The people involved in writing
and/or reviewing the code include at least: twisted, mflorrel, heath1444, davetroy,
tim_ringenbach, moy, tmancill, serge-v, and me. There are also positive test
reports from many people.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@61281 65c4cc65-6c06-0410-ace0-fbb531ad65f3
2007-04-10 20:44:44 +00:00
tobj - > peer - > appl = ! tobj - > return_to_pbx ? " Transferred Call " : " ManagerBridge " ;
2006-04-14 23:20:29 +00:00
tobj - > peer - > data = tobj - > chan - > name ;
Merge changes from team/russell/issue_5841:
This patch adds a "Bridge" Manager action, as well as a "Bridge" dialplan
application. The manager action will allow you to steal two active channels
in the system and bridge them together. Then, the one that did not hang up
will continue in the dialplan. Using the application will bridge the calling
channel to an arbitrary channel in the system. Whichever channel does not
hang up here will continue in the dialplan, as well.
This patch has been touched by a bunch of people over the course of a couple
years. Please forgive me if I have missed your name in the history of things.
The most recent patch came from issue #5841, but there is also a reference to
an earlier version of this patch from issue #4297. The people involved in writing
and/or reviewing the code include at least: twisted, mflorrel, heath1444, davetroy,
tim_ringenbach, moy, tmancill, serge-v, and me. There are also positive test
reports from many people.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@61281 65c4cc65-6c06-0410-ace0-fbb531ad65f3
2007-04-10 20:44:44 +00:00
2005-01-05 19:56:47 +00:00
ast_bridge_call ( tobj - > peer , tobj - > chan , & tobj - > bconfig ) ;
Merge changes from team/russell/issue_5841:
This patch adds a "Bridge" Manager action, as well as a "Bridge" dialplan
application. The manager action will allow you to steal two active channels
in the system and bridge them together. Then, the one that did not hang up
will continue in the dialplan. Using the application will bridge the calling
channel to an arbitrary channel in the system. Whichever channel does not
hang up here will continue in the dialplan, as well.
This patch has been touched by a bunch of people over the course of a couple
years. Please forgive me if I have missed your name in the history of things.
The most recent patch came from issue #5841, but there is also a reference to
an earlier version of this patch from issue #4297. The people involved in writing
and/or reviewing the code include at least: twisted, mflorrel, heath1444, davetroy,
tim_ringenbach, moy, tmancill, serge-v, and me. There are also positive test
reports from many people.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@61281 65c4cc65-6c06-0410-ace0-fbb531ad65f3
2007-04-10 20:44:44 +00:00
if ( tobj - > return_to_pbx ) {
if ( ! ast_check_hangup ( tobj - > peer ) ) {
ast_log ( LOG_VERBOSE , " putting peer %s into PBX again \n " , tobj - > peer - > name ) ;
res = ast_pbx_start ( tobj - > peer ) ;
if ( res ! = AST_PBX_SUCCESS )
ast_log ( LOG_WARNING , " FAILED continuing PBX on peer %s \n " , tobj - > peer - > name ) ;
} else
ast_hangup ( tobj - > peer ) ;
if ( ! ast_check_hangup ( tobj - > chan ) ) {
ast_log ( LOG_VERBOSE , " putting chan %s into PBX again \n " , tobj - > chan - > name ) ;
res = ast_pbx_start ( tobj - > chan ) ;
if ( res ! = AST_PBX_SUCCESS )
ast_log ( LOG_WARNING , " FAILED continuing PBX on chan %s \n " , tobj - > chan - > name ) ;
} else
ast_hangup ( tobj - > chan ) ;
} else {
ast_hangup ( tobj - > chan ) ;
ast_hangup ( tobj - > peer ) ;
}
2007-06-06 21:20:11 +00:00
ast_free ( tobj ) ;
Merge changes from team/russell/issue_5841:
This patch adds a "Bridge" Manager action, as well as a "Bridge" dialplan
application. The manager action will allow you to steal two active channels
in the system and bridge them together. Then, the one that did not hang up
will continue in the dialplan. Using the application will bridge the calling
channel to an arbitrary channel in the system. Whichever channel does not
hang up here will continue in the dialplan, as well.
This patch has been touched by a bunch of people over the course of a couple
years. Please forgive me if I have missed your name in the history of things.
The most recent patch came from issue #5841, but there is also a reference to
an earlier version of this patch from issue #4297. The people involved in writing
and/or reviewing the code include at least: twisted, mflorrel, heath1444, davetroy,
tim_ringenbach, moy, tmancill, serge-v, and me. There are also positive test
reports from many people.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@61281 65c4cc65-6c06-0410-ace0-fbb531ad65f3
2007-04-10 20:44:44 +00:00
2005-01-05 19:56:47 +00:00
return NULL ;
}
2007-08-07 23:04:01 +00:00
/*!
* \ brief create thread for the parked call
* \ param data
2007-09-05 16:31:39 +00:00
*
2007-08-07 23:04:01 +00:00
* Create thread and attributes , call ast_bridge_call_thread
*/
2005-01-05 19:56:47 +00:00
static void ast_bridge_call_thread_launch ( void * data )
{
pthread_t thread ;
pthread_attr_t attr ;
2005-11-09 00:16:08 +00:00
struct sched_param sched ;
2005-01-05 19:56:47 +00:00
2005-11-09 00:16:08 +00:00
pthread_attr_init ( & attr ) ;
2005-01-05 19:56:47 +00:00
pthread_attr_setdetachstate ( & attr , PTHREAD_CREATE_DETACHED ) ;
2005-11-09 00:16:08 +00:00
ast_pthread_create ( & thread , & attr , ast_bridge_call_thread , data ) ;
pthread_attr_destroy ( & attr ) ;
memset ( & sched , 0 , sizeof ( sched ) ) ;
pthread_setschedparam ( thread , SCHED_RR , & sched ) ;
2005-01-05 19:56:47 +00:00
}
2007-08-07 23:04:01 +00:00
/*!
* \ brief Announce call parking by ADSI
2007-09-05 16:31:39 +00:00
* \ param chan .
* \ param parkingexten .
2007-08-07 23:04:01 +00:00
* Create message to show for ADSI , display message .
* \ retval 0 on success .
* \ retval - 1 on failure .
*/
METERMAIDS:
-----------
- Adding devicestate providers, a new architecture to add non-channel related
device state information, like parking lots, queues, meetmes, vending machines
and Windows 98 reboots (lots of blinking on those lights)
- Adding provider for parking lots, so you can subscribe to the status of a
parking lot
- Adding provider for meetme, so you can have a blinking lamp for a meetme
( Example: exten => edvina,hint,meetme:1234 )
- Adding support for directed parking - set the PARKINGEXTEN before you manually
call Park() and you will be parked on that space. If it's occupied, dialplan
execution will continue.
This work was sponsored by Voop A/S - www.voop.com
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@36055 65c4cc65-6c06-0410-ace0-fbb531ad65f3
2006-06-26 16:43:21 +00:00
static int adsi_announce_park ( struct ast_channel * chan , char * parkingexten )
2004-09-15 19:49:33 +00:00
{
int res ;
int justify [ 5 ] = { ADSI_JUST_CENT , ADSI_JUST_CENT , ADSI_JUST_CENT , ADSI_JUST_CENT } ;
2005-09-07 21:01:31 +00:00
char tmp [ 256 ] ;
2005-09-07 18:55:03 +00:00
char * message [ 5 ] = { NULL , NULL , NULL , NULL , NULL } ;
2004-09-15 19:49:33 +00:00
METERMAIDS:
-----------
- Adding devicestate providers, a new architecture to add non-channel related
device state information, like parking lots, queues, meetmes, vending machines
and Windows 98 reboots (lots of blinking on those lights)
- Adding provider for parking lots, so you can subscribe to the status of a
parking lot
- Adding provider for meetme, so you can have a blinking lamp for a meetme
( Example: exten => edvina,hint,meetme:1234 )
- Adding support for directed parking - set the PARKINGEXTEN before you manually
call Park() and you will be parked on that space. If it's occupied, dialplan
execution will continue.
This work was sponsored by Voop A/S - www.voop.com
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@36055 65c4cc65-6c06-0410-ace0-fbb531ad65f3
2006-06-26 16:43:21 +00:00
snprintf ( tmp , sizeof ( tmp ) , " Parked on %s " , parkingexten ) ;
2005-09-07 18:55:03 +00:00
message [ 0 ] = tmp ;
2006-09-20 04:34:51 +00:00
res = ast_adsi_load_session ( chan , NULL , 0 , 1 ) ;
2006-04-14 23:20:29 +00:00
if ( res = = - 1 )
2004-09-15 19:49:33 +00:00
return res ;
2006-09-20 04:34:51 +00:00
return ast_adsi_print ( chan , message , justify , 1 ) ;
2004-09-15 19:49:33 +00:00
}
2008-04-21 23:42:45 +00:00
/*! \brief Find parking lot name from channel */
static const char * findparkinglotname ( struct ast_channel * chan )
{
const char * temp , * parkinglot = NULL ;
/* Check if the channel has a parking lot */
if ( ! ast_strlen_zero ( chan - > parkinglot ) )
parkinglot = chan - > parkinglot ;
/* Channel variables override everything */
if ( ( temp = pbx_builtin_getvar_helper ( chan , " PARKINGLOT " ) ) )
return temp ;
return parkinglot ;
}
METERMAIDS:
-----------
- Adding devicestate providers, a new architecture to add non-channel related
device state information, like parking lots, queues, meetmes, vending machines
and Windows 98 reboots (lots of blinking on those lights)
- Adding provider for parking lots, so you can subscribe to the status of a
parking lot
- Adding provider for meetme, so you can have a blinking lamp for a meetme
( Example: exten => edvina,hint,meetme:1234 )
- Adding support for directed parking - set the PARKINGEXTEN before you manually
call Park() and you will be parked on that space. If it's occupied, dialplan
execution will continue.
This work was sponsored by Voop A/S - www.voop.com
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@36055 65c4cc65-6c06-0410-ace0-fbb531ad65f3
2006-06-26 16:43:21 +00:00
/*! \brief Notify metermaids that we've changed an extension */
2007-08-10 16:24:11 +00:00
static void notify_metermaids ( const char * exten , char * context , enum ast_device_state state )
METERMAIDS:
-----------
- Adding devicestate providers, a new architecture to add non-channel related
device state information, like parking lots, queues, meetmes, vending machines
and Windows 98 reboots (lots of blinking on those lights)
- Adding provider for parking lots, so you can subscribe to the status of a
parking lot
- Adding provider for meetme, so you can have a blinking lamp for a meetme
( Example: exten => edvina,hint,meetme:1234 )
- Adding support for directed parking - set the PARKINGEXTEN before you manually
call Park() and you will be parked on that space. If it's occupied, dialplan
execution will continue.
This work was sponsored by Voop A/S - www.voop.com
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@36055 65c4cc65-6c06-0410-ace0-fbb531ad65f3
2006-06-26 16:43:21 +00:00
{
2007-08-10 16:24:11 +00:00
ast_debug ( 4 , " Notification of state change to metermaids %s@%s \n to state '%s' " ,
exten , context , devstate2str ( state ) ) ;
METERMAIDS:
-----------
- Adding devicestate providers, a new architecture to add non-channel related
device state information, like parking lots, queues, meetmes, vending machines
and Windows 98 reboots (lots of blinking on those lights)
- Adding provider for parking lots, so you can subscribe to the status of a
parking lot
- Adding provider for meetme, so you can have a blinking lamp for a meetme
( Example: exten => edvina,hint,meetme:1234 )
- Adding support for directed parking - set the PARKINGEXTEN before you manually
call Park() and you will be parked on that space. If it's occupied, dialplan
execution will continue.
This work was sponsored by Voop A/S - www.voop.com
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@36055 65c4cc65-6c06-0410-ace0-fbb531ad65f3
2006-06-26 16:43:21 +00:00
2007-08-10 16:24:11 +00:00
ast_devstate_changed ( state , " park:%s@%s " , exten , context ) ;
METERMAIDS:
-----------
- Adding devicestate providers, a new architecture to add non-channel related
device state information, like parking lots, queues, meetmes, vending machines
and Windows 98 reboots (lots of blinking on those lights)
- Adding provider for parking lots, so you can subscribe to the status of a
parking lot
- Adding provider for meetme, so you can have a blinking lamp for a meetme
( Example: exten => edvina,hint,meetme:1234 )
- Adding support for directed parking - set the PARKINGEXTEN before you manually
call Park() and you will be parked on that space. If it's occupied, dialplan
execution will continue.
This work was sponsored by Voop A/S - www.voop.com
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@36055 65c4cc65-6c06-0410-ace0-fbb531ad65f3
2006-06-26 16:43:21 +00:00
}
/*! \brief metermaids callback from devicestate.c */
2007-02-13 22:02:20 +00:00
static enum ast_device_state metermaidstate ( const char * data )
METERMAIDS:
-----------
- Adding devicestate providers, a new architecture to add non-channel related
device state information, like parking lots, queues, meetmes, vending machines
and Windows 98 reboots (lots of blinking on those lights)
- Adding provider for parking lots, so you can subscribe to the status of a
parking lot
- Adding provider for meetme, so you can have a blinking lamp for a meetme
( Example: exten => edvina,hint,meetme:1234 )
- Adding support for directed parking - set the PARKINGEXTEN before you manually
call Park() and you will be parked on that space. If it's occupied, dialplan
execution will continue.
This work was sponsored by Voop A/S - www.voop.com
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@36055 65c4cc65-6c06-0410-ace0-fbb531ad65f3
2006-06-26 16:43:21 +00:00
{
2007-07-08 13:22:30 +00:00
char * context ;
METERMAIDS:
-----------
- Adding devicestate providers, a new architecture to add non-channel related
device state information, like parking lots, queues, meetmes, vending machines
and Windows 98 reboots (lots of blinking on those lights)
- Adding provider for parking lots, so you can subscribe to the status of a
parking lot
- Adding provider for meetme, so you can have a blinking lamp for a meetme
( Example: exten => edvina,hint,meetme:1234 )
- Adding support for directed parking - set the PARKINGEXTEN before you manually
call Park() and you will be parked on that space. If it's occupied, dialplan
execution will continue.
This work was sponsored by Voop A/S - www.voop.com
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@36055 65c4cc65-6c06-0410-ace0-fbb531ad65f3
2006-06-26 16:43:21 +00:00
char * exten ;
2007-07-08 13:22:30 +00:00
context = ast_strdupa ( data ) ;
METERMAIDS:
-----------
- Adding devicestate providers, a new architecture to add non-channel related
device state information, like parking lots, queues, meetmes, vending machines
and Windows 98 reboots (lots of blinking on those lights)
- Adding provider for parking lots, so you can subscribe to the status of a
parking lot
- Adding provider for meetme, so you can have a blinking lamp for a meetme
( Example: exten => edvina,hint,meetme:1234 )
- Adding support for directed parking - set the PARKINGEXTEN before you manually
call Park() and you will be parked on that space. If it's occupied, dialplan
execution will continue.
This work was sponsored by Voop A/S - www.voop.com
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@36055 65c4cc65-6c06-0410-ace0-fbb531ad65f3
2006-06-26 16:43:21 +00:00
exten = strsep ( & context , " @ " ) ;
if ( ! context )
2007-07-08 13:22:30 +00:00
return AST_DEVICE_INVALID ;
METERMAIDS:
-----------
- Adding devicestate providers, a new architecture to add non-channel related
device state information, like parking lots, queues, meetmes, vending machines
and Windows 98 reboots (lots of blinking on those lights)
- Adding provider for parking lots, so you can subscribe to the status of a
parking lot
- Adding provider for meetme, so you can have a blinking lamp for a meetme
( Example: exten => edvina,hint,meetme:1234 )
- Adding support for directed parking - set the PARKINGEXTEN before you manually
call Park() and you will be parked on that space. If it's occupied, dialplan
execution will continue.
This work was sponsored by Voop A/S - www.voop.com
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@36055 65c4cc65-6c06-0410-ace0-fbb531ad65f3
2006-06-26 16:43:21 +00:00
2007-06-14 19:39:12 +00:00
ast_debug ( 4 , " Checking state of exten %s in context %s \n " , exten , context ) ;
METERMAIDS:
-----------
- Adding devicestate providers, a new architecture to add non-channel related
device state information, like parking lots, queues, meetmes, vending machines
and Windows 98 reboots (lots of blinking on those lights)
- Adding provider for parking lots, so you can subscribe to the status of a
parking lot
- Adding provider for meetme, so you can have a blinking lamp for a meetme
( Example: exten => edvina,hint,meetme:1234 )
- Adding support for directed parking - set the PARKINGEXTEN before you manually
call Park() and you will be parked on that space. If it's occupied, dialplan
execution will continue.
This work was sponsored by Voop A/S - www.voop.com
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@36055 65c4cc65-6c06-0410-ace0-fbb531ad65f3
2006-06-26 16:43:21 +00:00
2007-07-08 13:22:30 +00:00
if ( ! ast_exists_extension ( NULL , context , exten , 1 , NULL ) )
METERMAIDS:
-----------
- Adding devicestate providers, a new architecture to add non-channel related
device state information, like parking lots, queues, meetmes, vending machines
and Windows 98 reboots (lots of blinking on those lights)
- Adding provider for parking lots, so you can subscribe to the status of a
parking lot
- Adding provider for meetme, so you can have a blinking lamp for a meetme
( Example: exten => edvina,hint,meetme:1234 )
- Adding support for directed parking - set the PARKINGEXTEN before you manually
call Park() and you will be parked on that space. If it's occupied, dialplan
execution will continue.
This work was sponsored by Voop A/S - www.voop.com
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@36055 65c4cc65-6c06-0410-ace0-fbb531ad65f3
2006-06-26 16:43:21 +00:00
return AST_DEVICE_NOT_INUSE ;
2007-07-08 13:22:30 +00:00
return AST_DEVICE_INUSE ;
METERMAIDS:
-----------
- Adding devicestate providers, a new architecture to add non-channel related
device state information, like parking lots, queues, meetmes, vending machines
and Windows 98 reboots (lots of blinking on those lights)
- Adding provider for parking lots, so you can subscribe to the status of a
parking lot
- Adding provider for meetme, so you can have a blinking lamp for a meetme
( Example: exten => edvina,hint,meetme:1234 )
- Adding support for directed parking - set the PARKINGEXTEN before you manually
call Park() and you will be parked on that space. If it's occupied, dialplan
execution will continue.
This work was sponsored by Voop A/S - www.voop.com
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@36055 65c4cc65-6c06-0410-ace0-fbb531ad65f3
2006-06-26 16:43:21 +00:00
}
2008-04-25 18:18:27 +00:00
/*! Options to pass to ast_park_call_full */
enum ast_park_call_options {
/*! Provide ringing to the parked caller instead of music on hold */
AST_PARK_OPT_RINGING = ( 1 < < 0 ) ,
/*! Randomly choose a parking spot for the caller instead of choosing
* the first one that is available . */
AST_PARK_OPT_RANDOMIZE = ( 1 < < 1 ) ,
2008-08-29 17:53:32 +00:00
/*! Do not announce the parking number */
AST_PARK_OPT_SILENCE = ( 1 < < 2 ) ,
2008-04-25 18:18:27 +00:00
} ;
struct ast_park_call_args {
/*! How long to wait in the parking lot before the call gets sent back
* to the specified return extension ( or a best guess at where it came
* from if not explicitly specified ) . */
int timeout ;
/*! An output parameter to store the parking space where the parked caller
* was placed . */
int * extout ;
const char * orig_chan_name ;
const char * return_con ;
const char * return_ext ;
int return_pri ;
uint32_t flags ;
} ;
2007-08-07 23:04:01 +00:00
/* Park a call */
2008-04-25 18:18:27 +00:00
static int ast_park_call_full ( struct ast_channel * chan , struct ast_channel * peer ,
struct ast_park_call_args * args )
2001-12-27 11:07:33 +00:00
{
2008-04-25 18:18:27 +00:00
struct parkeduser * pu ;
METERMAIDS:
-----------
- Adding devicestate providers, a new architecture to add non-channel related
device state information, like parking lots, queues, meetmes, vending machines
and Windows 98 reboots (lots of blinking on those lights)
- Adding provider for parking lots, so you can subscribe to the status of a
parking lot
- Adding provider for meetme, so you can have a blinking lamp for a meetme
( Example: exten => edvina,hint,meetme:1234 )
- Adding support for directed parking - set the PARKINGEXTEN before you manually
call Park() and you will be parked on that space. If it's occupied, dialplan
execution will continue.
This work was sponsored by Voop A/S - www.voop.com
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@36055 65c4cc65-6c06-0410-ace0-fbb531ad65f3
2006-06-26 16:43:21 +00:00
int i , x = - 1 , parking_range ;
2004-08-03 06:31:20 +00:00
struct ast_context * con ;
2008-06-06 17:50:05 +00:00
const char * parkinglotname = NULL ;
METERMAIDS:
-----------
- Adding devicestate providers, a new architecture to add non-channel related
device state information, like parking lots, queues, meetmes, vending machines
and Windows 98 reboots (lots of blinking on those lights)
- Adding provider for parking lots, so you can subscribe to the status of a
parking lot
- Adding provider for meetme, so you can have a blinking lamp for a meetme
( Example: exten => edvina,hint,meetme:1234 )
- Adding support for directed parking - set the PARKINGEXTEN before you manually
call Park() and you will be parked on that space. If it's occupied, dialplan
execution will continue.
This work was sponsored by Voop A/S - www.voop.com
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@36055 65c4cc65-6c06-0410-ace0-fbb531ad65f3
2006-06-26 16:43:21 +00:00
const char * parkingexten ;
2008-05-14 16:52:30 +00:00
struct ast_parkinglot * parkinglot = NULL ;
2006-01-21 22:09:06 +00:00
2008-06-06 17:50:05 +00:00
if ( peer )
parkinglotname = findparkinglotname ( peer ) ;
2008-04-21 23:42:45 +00:00
if ( parkinglotname ) {
if ( option_debug )
ast_log ( LOG_DEBUG , " Found chanvar Parkinglot: %s \n " , parkinglotname ) ;
2008-05-14 16:52:30 +00:00
parkinglot = find_parkinglot ( parkinglotname ) ;
2008-04-21 23:42:45 +00:00
}
2008-05-14 16:52:30 +00:00
if ( ! parkinglot )
parkinglot = default_parkinglot ;
2008-04-21 23:42:45 +00:00
2008-05-14 16:52:30 +00:00
parkinglot_addref ( parkinglot ) ;
2008-04-21 23:42:45 +00:00
if ( option_debug )
2008-05-14 16:52:30 +00:00
ast_log ( LOG_DEBUG , " Parkinglot: %s \n " , parkinglot - > name ) ;
2008-04-21 23:42:45 +00:00
METERMAIDS:
-----------
- Adding devicestate providers, a new architecture to add non-channel related
device state information, like parking lots, queues, meetmes, vending machines
and Windows 98 reboots (lots of blinking on those lights)
- Adding provider for parking lots, so you can subscribe to the status of a
parking lot
- Adding provider for meetme, so you can have a blinking lamp for a meetme
( Example: exten => edvina,hint,meetme:1234 )
- Adding support for directed parking - set the PARKINGEXTEN before you manually
call Park() and you will be parked on that space. If it's occupied, dialplan
execution will continue.
This work was sponsored by Voop A/S - www.voop.com
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@36055 65c4cc65-6c06-0410-ace0-fbb531ad65f3
2006-06-26 16:43:21 +00:00
/* Allocate memory for parking data */
2008-04-21 23:42:45 +00:00
if ( ! ( pu = ast_calloc ( 1 , sizeof ( * pu ) ) ) ) {
2008-05-14 16:52:30 +00:00
parkinglot_unref ( parkinglot ) ;
2005-07-25 17:31:53 +00:00
return - 1 ;
2008-04-21 23:42:45 +00:00
}
2006-06-21 07:49:29 +00:00
2008-04-21 23:42:45 +00:00
/* Lock parking list */
2008-05-14 16:52:30 +00:00
AST_LIST_LOCK ( & parkinglot - > parkings ) ;
METERMAIDS:
-----------
- Adding devicestate providers, a new architecture to add non-channel related
device state information, like parking lots, queues, meetmes, vending machines
and Windows 98 reboots (lots of blinking on those lights)
- Adding provider for parking lots, so you can subscribe to the status of a
parking lot
- Adding provider for meetme, so you can have a blinking lamp for a meetme
( Example: exten => edvina,hint,meetme:1234 )
- Adding support for directed parking - set the PARKINGEXTEN before you manually
call Park() and you will be parked on that space. If it's occupied, dialplan
execution will continue.
This work was sponsored by Voop A/S - www.voop.com
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@36055 65c4cc65-6c06-0410-ace0-fbb531ad65f3
2006-06-26 16:43:21 +00:00
/* Check for channel variable PARKINGEXTEN */
parkingexten = pbx_builtin_getvar_helper ( chan , " PARKINGEXTEN " ) ;
if ( ! ast_strlen_zero ( parkingexten ) ) {
2008-06-12 23:08:37 +00:00
/*!\note The API forces us to specify a numeric parking slot, even
* though the architecture would tend to support non - numeric extensions
* ( as are possible with SIP , for example ) . Hence , we enforce that
* limitation here . If extout was not numeric , we could permit
* arbitrary non - numeric extensions .
*/
if ( sscanf ( parkingexten , " %d " , & x ) ! = 1 | | x < 0 ) {
AST_LIST_UNLOCK ( & parkinglot - > parkings ) ;
parkinglot_unref ( parkinglot ) ;
free ( pu ) ;
ast_log ( LOG_WARNING , " PARKINGEXTEN does not indicate a valid parking slot: '%s'. \n " , parkingexten ) ;
return 1 ; /* Continue execution if possible */
}
snprintf ( pu - > parkingexten , sizeof ( pu - > parkingexten ) , " %d " , x ) ;
if ( ast_exists_extension ( NULL , parkinglot - > parking_con , pu - > parkingexten , 1 , NULL ) ) {
2008-05-14 16:52:30 +00:00
AST_LIST_UNLOCK ( & parkinglot - > parkings ) ;
parkinglot_unref ( parkinglot ) ;
2007-06-06 21:20:11 +00:00
ast_free ( pu ) ;
2008-05-14 16:52:30 +00:00
ast_log ( LOG_WARNING , " Requested parking extension already exists: %s@%s \n " , parkingexten , parkinglot - > parking_con ) ;
2008-01-04 22:57:56 +00:00
return 1 ; /* Continue execution if possible */
METERMAIDS:
-----------
- Adding devicestate providers, a new architecture to add non-channel related
device state information, like parking lots, queues, meetmes, vending machines
and Windows 98 reboots (lots of blinking on those lights)
- Adding provider for parking lots, so you can subscribe to the status of a
parking lot
- Adding provider for meetme, so you can have a blinking lamp for a meetme
( Example: exten => edvina,hint,meetme:1234 )
- Adding support for directed parking - set the PARKINGEXTEN before you manually
call Park() and you will be parked on that space. If it's occupied, dialplan
execution will continue.
This work was sponsored by Voop A/S - www.voop.com
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@36055 65c4cc65-6c06-0410-ace0-fbb531ad65f3
2006-06-26 16:43:21 +00:00
}
} else {
2008-04-25 18:18:27 +00:00
int start ;
struct parkeduser * cur = NULL ;
METERMAIDS:
-----------
- Adding devicestate providers, a new architecture to add non-channel related
device state information, like parking lots, queues, meetmes, vending machines
and Windows 98 reboots (lots of blinking on those lights)
- Adding provider for parking lots, so you can subscribe to the status of a
parking lot
- Adding provider for meetme, so you can have a blinking lamp for a meetme
( Example: exten => edvina,hint,meetme:1234 )
- Adding support for directed parking - set the PARKINGEXTEN before you manually
call Park() and you will be parked on that space. If it's occupied, dialplan
execution will continue.
This work was sponsored by Voop A/S - www.voop.com
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@36055 65c4cc65-6c06-0410-ace0-fbb531ad65f3
2006-06-26 16:43:21 +00:00
/* Select parking space within range */
2008-05-14 16:52:30 +00:00
parking_range = parkinglot - > parking_stop - parkinglot - > parking_start + 1 ;
2008-04-25 18:18:27 +00:00
if ( ast_test_flag ( args , AST_PARK_OPT_RANDOMIZE ) ) {
2008-05-14 16:52:30 +00:00
start = ast_random ( ) % ( parkinglot - > parking_stop - parkinglot - > parking_start + 1 ) ;
2008-04-25 18:18:27 +00:00
} else {
2008-05-14 16:52:30 +00:00
start = parkinglot - > parking_start ;
2008-04-25 18:18:27 +00:00
}
for ( i = start ; 1 ; i + + ) {
2008-05-14 16:52:30 +00:00
if ( i = = parkinglot - > parking_stop + 1 ) {
i = parkinglot - > parking_start - 1 ;
2008-04-25 18:18:27 +00:00
continue ;
}
2008-05-14 16:52:30 +00:00
AST_LIST_TRAVERSE ( & parkinglot - > parkings , cur , list ) {
2008-04-25 18:18:27 +00:00
if ( cur - > parkingnum = = i ) {
METERMAIDS:
-----------
- Adding devicestate providers, a new architecture to add non-channel related
device state information, like parking lots, queues, meetmes, vending machines
and Windows 98 reboots (lots of blinking on those lights)
- Adding provider for parking lots, so you can subscribe to the status of a
parking lot
- Adding provider for meetme, so you can have a blinking lamp for a meetme
( Example: exten => edvina,hint,meetme:1234 )
- Adding support for directed parking - set the PARKINGEXTEN before you manually
call Park() and you will be parked on that space. If it's occupied, dialplan
execution will continue.
This work was sponsored by Voop A/S - www.voop.com
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@36055 65c4cc65-6c06-0410-ace0-fbb531ad65f3
2006-06-26 16:43:21 +00:00
break ;
2008-04-25 18:18:27 +00:00
}
METERMAIDS:
-----------
- Adding devicestate providers, a new architecture to add non-channel related
device state information, like parking lots, queues, meetmes, vending machines
and Windows 98 reboots (lots of blinking on those lights)
- Adding provider for parking lots, so you can subscribe to the status of a
parking lot
- Adding provider for meetme, so you can have a blinking lamp for a meetme
( Example: exten => edvina,hint,meetme:1234 )
- Adding support for directed parking - set the PARKINGEXTEN before you manually
call Park() and you will be parked on that space. If it's occupied, dialplan
execution will continue.
This work was sponsored by Voop A/S - www.voop.com
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@36055 65c4cc65-6c06-0410-ace0-fbb531ad65f3
2006-06-26 16:43:21 +00:00
}
2008-04-25 18:18:27 +00:00
if ( ! cur | | i = = start - 1 ) {
2008-05-14 16:52:30 +00:00
x = i ;
2001-12-27 11:07:33 +00:00
break ;
2008-04-25 18:18:27 +00:00
}
2001-12-27 11:07:33 +00:00
}
2005-04-27 03:58:40 +00:00
2008-04-25 18:18:27 +00:00
if ( i = = start - 1 & & cur ) {
METERMAIDS:
-----------
- Adding devicestate providers, a new architecture to add non-channel related
device state information, like parking lots, queues, meetmes, vending machines
and Windows 98 reboots (lots of blinking on those lights)
- Adding provider for parking lots, so you can subscribe to the status of a
parking lot
- Adding provider for meetme, so you can have a blinking lamp for a meetme
( Example: exten => edvina,hint,meetme:1234 )
- Adding support for directed parking - set the PARKINGEXTEN before you manually
call Park() and you will be parked on that space. If it's occupied, dialplan
execution will continue.
This work was sponsored by Voop A/S - www.voop.com
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@36055 65c4cc65-6c06-0410-ace0-fbb531ad65f3
2006-06-26 16:43:21 +00:00
ast_log ( LOG_WARNING , " No more parking spaces \n " ) ;
2007-06-06 21:20:11 +00:00
ast_free ( pu ) ;
2008-05-14 16:52:30 +00:00
AST_LIST_UNLOCK ( & parkinglot - > parkings ) ;
parkinglot_unref ( parkinglot ) ;
METERMAIDS:
-----------
- Adding devicestate providers, a new architecture to add non-channel related
device state information, like parking lots, queues, meetmes, vending machines
and Windows 98 reboots (lots of blinking on those lights)
- Adding provider for parking lots, so you can subscribe to the status of a
parking lot
- Adding provider for meetme, so you can have a blinking lamp for a meetme
( Example: exten => edvina,hint,meetme:1234 )
- Adding support for directed parking - set the PARKINGEXTEN before you manually
call Park() and you will be parked on that space. If it's occupied, dialplan
execution will continue.
This work was sponsored by Voop A/S - www.voop.com
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@36055 65c4cc65-6c06-0410-ace0-fbb531ad65f3
2006-06-26 16:43:21 +00:00
return - 1 ;
}
/* Set pointer for next parking */
2008-05-14 16:52:30 +00:00
if ( parkinglot - > parkfindnext )
parkinglot - > parking_offset = x - parkinglot - > parking_start + 1 ;
2008-06-12 23:08:37 +00:00
snprintf ( pu - > parkingexten , sizeof ( pu - > parkingexten ) , " %d " , x ) ;
2005-07-25 17:31:53 +00:00
}
METERMAIDS:
-----------
- Adding devicestate providers, a new architecture to add non-channel related
device state information, like parking lots, queues, meetmes, vending machines
and Windows 98 reboots (lots of blinking on those lights)
- Adding provider for parking lots, so you can subscribe to the status of a
parking lot
- Adding provider for meetme, so you can have a blinking lamp for a meetme
( Example: exten => edvina,hint,meetme:1234 )
- Adding support for directed parking - set the PARKINGEXTEN before you manually
call Park() and you will be parked on that space. If it's occupied, dialplan
execution will continue.
This work was sponsored by Voop A/S - www.voop.com
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@36055 65c4cc65-6c06-0410-ace0-fbb531ad65f3
2006-06-26 16:43:21 +00:00
2005-07-25 17:31:53 +00:00
chan - > appl = " Parked Call " ;
chan - > data = NULL ;
pu - > chan = chan ;
METERMAIDS:
-----------
- Adding devicestate providers, a new architecture to add non-channel related
device state information, like parking lots, queues, meetmes, vending machines
and Windows 98 reboots (lots of blinking on those lights)
- Adding provider for parking lots, so you can subscribe to the status of a
parking lot
- Adding provider for meetme, so you can have a blinking lamp for a meetme
( Example: exten => edvina,hint,meetme:1234 )
- Adding support for directed parking - set the PARKINGEXTEN before you manually
call Park() and you will be parked on that space. If it's occupied, dialplan
execution will continue.
This work was sponsored by Voop A/S - www.voop.com
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@36055 65c4cc65-6c06-0410-ace0-fbb531ad65f3
2006-06-26 16:43:21 +00:00
2006-07-19 20:44:39 +00:00
/* Put the parked channel on hold if we have two different channels */
2005-07-25 17:31:53 +00:00
if ( chan ! = peer ) {
2008-04-25 18:18:27 +00:00
if ( ast_test_flag ( args , AST_PARK_OPT_RINGING ) ) {
ast_indicate ( pu - > chan , AST_CONTROL_RINGING ) ;
} else {
ast_indicate_data ( pu - > chan , AST_CONTROL_HOLD ,
2008-05-14 16:52:30 +00:00
S_OR ( parkinglot - > mohclass , NULL ) ,
! ast_strlen_zero ( parkinglot - > mohclass ) ? strlen ( parkinglot - > mohclass ) + 1 : 0 ) ;
2008-04-25 18:18:27 +00:00
}
2005-07-25 17:31:53 +00:00
}
2006-07-19 20:44:39 +00:00
2005-07-25 17:31:53 +00:00
pu - > start = ast_tvnow ( ) ;
pu - > parkingnum = x ;
2008-05-14 16:52:30 +00:00
pu - > parkinglot = parkinglot ;
pu - > parkingtime = ( args - > timeout > 0 ) ? args - > timeout : parkinglot - > parkingtime ;
2008-04-25 18:18:27 +00:00
if ( args - > extout )
* ( args - > extout ) = x ;
2007-12-26 17:26:04 +00:00
if ( peer )
2005-07-25 17:31:53 +00:00
ast_copy_string ( pu - > peername , peer - > name , sizeof ( pu - > peername ) ) ;
/* Remember what had been dialed, so that if the parking
expires , we try to come back to the same place */
2008-04-25 18:18:27 +00:00
ast_copy_string ( pu - > context ,
S_OR ( args - > return_con , S_OR ( chan - > macrocontext , chan - > context ) ) ,
sizeof ( pu - > context ) ) ;
ast_copy_string ( pu - > exten ,
S_OR ( args - > return_ext , S_OR ( chan - > macroexten , chan - > exten ) ) ,
sizeof ( pu - > exten ) ) ;
pu - > priority = pu - > priority ? pu - > priority :
( chan - > macropriority ? chan - > macropriority : chan - > priority ) ;
2008-05-14 16:52:30 +00:00
AST_LIST_INSERT_TAIL ( & parkinglot - > parkings , pu , list ) ;
METERMAIDS:
-----------
- Adding devicestate providers, a new architecture to add non-channel related
device state information, like parking lots, queues, meetmes, vending machines
and Windows 98 reboots (lots of blinking on those lights)
- Adding provider for parking lots, so you can subscribe to the status of a
parking lot
- Adding provider for meetme, so you can have a blinking lamp for a meetme
( Example: exten => edvina,hint,meetme:1234 )
- Adding support for directed parking - set the PARKINGEXTEN before you manually
call Park() and you will be parked on that space. If it's occupied, dialplan
execution will continue.
This work was sponsored by Voop A/S - www.voop.com
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@36055 65c4cc65-6c06-0410-ace0-fbb531ad65f3
2006-06-26 16:43:21 +00:00
2005-07-25 17:31:53 +00:00
/* If parking a channel directly, don't quiet yet get parking running on it */
if ( peer = = chan )
pu - > notquiteyet = 1 ;
2008-05-14 16:52:30 +00:00
AST_LIST_UNLOCK ( & parkinglot - > parkings ) ;
2008-04-21 23:42:45 +00:00
2005-07-25 17:31:53 +00:00
/* Wake up the (presumably select()ing) thread */
pthread_kill ( parking_thread , SIGURG ) ;
2008-05-14 16:52:30 +00:00
ast_verb ( 2 , " Parked %s on %d (lot %s). Will timeout back to extension [%s] %s, %d in %d seconds \n " , pu - > chan - > name , pu - > parkingnum , parkinglot - > name , pu - > context , pu - > exten , pu - > priority , ( pu - > parkingtime / 1000 ) ) ;
2005-07-25 17:31:53 +00:00
manager_event ( EVENT_FLAG_CALL , " ParkedCall " ,
METERMAIDS:
-----------
- Adding devicestate providers, a new architecture to add non-channel related
device state information, like parking lots, queues, meetmes, vending machines
and Windows 98 reboots (lots of blinking on those lights)
- Adding provider for parking lots, so you can subscribe to the status of a
parking lot
- Adding provider for meetme, so you can have a blinking lamp for a meetme
( Example: exten => edvina,hint,meetme:1234 )
- Adding support for directed parking - set the PARKINGEXTEN before you manually
call Park() and you will be parked on that space. If it's occupied, dialplan
execution will continue.
This work was sponsored by Voop A/S - www.voop.com
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@36055 65c4cc65-6c06-0410-ace0-fbb531ad65f3
2006-06-26 16:43:21 +00:00
" Exten: %s \r \n "
2005-07-25 17:31:53 +00:00
" Channel: %s \r \n "
2008-04-21 23:42:45 +00:00
" Parkinglot: %s \r \n "
2005-07-25 17:31:53 +00:00
" From: %s \r \n "
" Timeout: %ld \r \n "
2006-10-02 20:35:16 +00:00
" CallerIDNum: %s \r \n "
2008-08-17 14:12:11 +00:00
" CallerIDName: %s \r \n "
" Uniqueid: %s \r \n " ,
pu - > parkingexten , pu - > chan - > name , pu - > parkinglot - > name , peer ? peer - > name : " " ,
2006-04-21 10:47:07 +00:00
( long ) pu - > start . tv_sec + ( long ) ( pu - > parkingtime / 1000 ) - ( long ) time ( NULL ) ,
S_OR ( pu - > chan - > cid . cid_num , " <unknown> " ) ,
2008-08-17 14:12:11 +00:00
S_OR ( pu - > chan - > cid . cid_name , " <unknown> " ) ,
pu - > chan - > uniqueid
2005-07-25 17:31:53 +00:00
) ;
2003-07-02 14:06:12 +00:00
2006-09-20 04:34:51 +00:00
if ( peer & & adsipark & & ast_adsi_available ( peer ) ) {
METERMAIDS:
-----------
- Adding devicestate providers, a new architecture to add non-channel related
device state information, like parking lots, queues, meetmes, vending machines
and Windows 98 reboots (lots of blinking on those lights)
- Adding provider for parking lots, so you can subscribe to the status of a
parking lot
- Adding provider for meetme, so you can have a blinking lamp for a meetme
( Example: exten => edvina,hint,meetme:1234 )
- Adding support for directed parking - set the PARKINGEXTEN before you manually
call Park() and you will be parked on that space. If it's occupied, dialplan
execution will continue.
This work was sponsored by Voop A/S - www.voop.com
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@36055 65c4cc65-6c06-0410-ace0-fbb531ad65f3
2006-06-26 16:43:21 +00:00
adsi_announce_park ( peer , pu - > parkingexten ) ; /* Only supports parking numbers */
2006-09-20 04:34:51 +00:00
ast_adsi_unload_session ( peer ) ;
2005-07-25 17:31:53 +00:00
}
2006-06-21 07:49:29 +00:00
2008-05-14 16:52:30 +00:00
con = ast_context_find_or_create ( NULL , NULL , parkinglot - > parking_con , registrar ) ;
2006-06-21 07:49:29 +00:00
if ( ! con ) /* Still no context? Bad */
2008-05-14 16:52:30 +00:00
ast_log ( LOG_ERROR , " Parking context '%s' does not exist and unable to create \n " , parkinglot - > parking_con ) ;
2006-06-21 07:49:29 +00:00
/* Tell the peer channel the number of the parking space */
2008-08-29 17:53:32 +00:00
if ( peer & & ! ast_test_flag ( args , AST_PARK_OPT_SILENCE ) & & ( ast_strlen_zero ( args - > orig_chan_name ) | | ! strcasecmp ( peer - > name , args - > orig_chan_name ) ) ) { /* Only say number if it's a number and the channel hasn't been masqueraded away */
2008-03-11 15:05:17 +00:00
/* If a channel is masqueraded into peer while playing back the parking slot number do not continue playing it back. This is the case if an attended transfer occurs. */
2007-09-05 20:58:19 +00:00
ast_set_flag ( peer , AST_FLAG_MASQ_NOSTREAM ) ;
2005-07-25 17:31:53 +00:00
ast_say_digits ( peer , pu - > parkingnum , " " , peer - > language ) ;
2007-09-05 20:58:19 +00:00
ast_clear_flag ( peer , AST_FLAG_MASQ_NOSTREAM ) ;
}
2007-06-19 13:04:24 +00:00
if ( con ) {
2007-09-17 18:57:56 +00:00
if ( ! ast_add_extension2 ( con , 1 , pu - > parkingexten , 1 , NULL , NULL , parkedcall , ast_strdup ( pu - > parkingexten ) , ast_free_ptr , registrar ) )
2008-05-14 16:52:30 +00:00
notify_metermaids ( pu - > parkingexten , parkinglot - > parking_con , AST_DEVICE_INUSE ) ;
2007-06-19 13:04:24 +00:00
}
2005-07-25 17:31:53 +00:00
if ( pu - > notquiteyet ) {
/* Wake up parking thread if we're really done */
2006-07-19 20:44:39 +00:00
ast_indicate_data ( pu - > chan , AST_CONTROL_HOLD ,
2008-05-14 16:52:30 +00:00
S_OR ( parkinglot - > mohclass , NULL ) ,
! ast_strlen_zero ( parkinglot - > mohclass ) ? strlen ( parkinglot - > mohclass ) + 1 : 0 ) ;
2005-07-25 17:31:53 +00:00
pu - > notquiteyet = 0 ;
pthread_kill ( parking_thread , SIGURG ) ;
2001-12-27 11:07:33 +00:00
}
return 0 ;
}
2007-11-21 19:20:33 +00:00
/*! \brief Park a call */
int ast_park_call ( struct ast_channel * chan , struct ast_channel * peer , int timeout , int * extout )
{
2008-04-25 18:18:27 +00:00
struct ast_park_call_args args = {
. timeout = timeout ,
. extout = extout ,
} ;
return ast_park_call_full ( chan , peer , & args ) ;
2007-11-21 19:20:33 +00:00
}
2007-08-07 23:04:01 +00:00
/* Park call via masquraded channel */
2003-02-02 19:37:23 +00:00
int ast_masq_park_call ( struct ast_channel * rchan , struct ast_channel * peer , int timeout , int * extout )
2001-12-27 11:07:33 +00:00
{
struct ast_channel * chan ;
struct ast_frame * f ;
2008-01-28 18:41:23 +00:00
char * orig_chan_name = NULL ;
2008-06-12 23:08:37 +00:00
int park_status ;
2005-07-25 17:31:53 +00:00
2001-12-27 11:07:33 +00:00
/* Make a new, fake channel that we'll use to masquerade in the real one */
2007-04-10 05:41:34 +00:00
if ( ! ( chan = ast_channel_alloc ( 0 , AST_STATE_DOWN , 0 , 0 , rchan - > accountcode , rchan - > exten , rchan - > context , rchan - > amaflags , " Parked/%s " , rchan - > name ) ) ) {
2001-12-27 11:07:33 +00:00
ast_log ( LOG_WARNING , " Unable to create parked channel \n " ) ;
return - 1 ;
}
2006-06-21 07:49:29 +00:00
/* Make formats okay */
chan - > readformat = rchan - > readformat ;
chan - > writeformat = rchan - > writeformat ;
ast_channel_masquerade ( chan , rchan ) ;
/* Setup the extensions and such */
set_c_e_p ( chan , rchan - > context , rchan - > exten , rchan - > priority ) ;
/* Make the masq execute */
2008-01-24 20:32:05 +00:00
if ( ( f = ast_read ( chan ) ) )
2006-06-21 07:49:29 +00:00
ast_frfree ( f ) ;
2008-01-28 18:41:23 +00:00
orig_chan_name = ast_strdupa ( chan - > name ) ;
2008-04-25 18:18:27 +00:00
{
struct ast_park_call_args args = {
. timeout = timeout ,
. extout = extout ,
. orig_chan_name = orig_chan_name ,
} ;
2008-06-12 23:08:37 +00:00
park_status = ast_park_call_full ( chan , peer , & args ) ;
if ( park_status = = 1 ) {
/* would be nice to play "invalid parking extension" */
ast_hangup ( chan ) ;
return - 1 ;
}
2008-04-25 18:18:27 +00:00
}
2008-01-28 18:41:23 +00:00
2001-12-27 11:07:33 +00:00
return 0 ;
}
2005-01-04 04:01:40 +00:00
# define FEATURE_SENSE_CHAN (1 << 0)
# define FEATURE_SENSE_PEER (1 << 1)
2005-08-23 02:22:33 +00:00
2007-08-07 23:04:01 +00:00
/*!
* \ brief set caller and callee according to the direction
* \ param caller , callee , peer , chan , sense
2007-09-05 16:31:39 +00:00
*
2007-08-07 23:04:01 +00:00
* Detect who triggered feature and set callee / caller variables accordingly
*/
2006-04-16 19:26:57 +00:00
static void set_peers ( struct ast_channel * * caller , struct ast_channel * * callee ,
struct ast_channel * peer , struct ast_channel * chan , int sense )
{
if ( sense = = FEATURE_SENSE_PEER ) {
* caller = peer ;
* callee = chan ;
} else {
* callee = peer ;
* caller = chan ;
}
}
2005-01-04 04:01:40 +00:00
2007-08-07 23:04:01 +00:00
/*!
* \ brief support routing for one touch call parking
* \ param chan channel parking call
* \ param peer channel to be parked
* \ param config unsed
* \ param code unused
2007-09-05 16:31:39 +00:00
* \ param sense feature options
*
2007-08-23 20:20:17 +00:00
* \ param data
2007-08-07 23:04:01 +00:00
* Setup channel , set return exten , priority to ' s , 1 '
* answer chan , sleep chan , park call
*/
2007-08-23 20:20:17 +00:00
static int builtin_parkcall ( struct ast_channel * chan , struct ast_channel * peer , struct ast_bridge_config * config , char * code , int sense , void * data )
2006-05-22 16:43:43 +00:00
{
struct ast_channel * parker ;
2008-03-04 23:04:29 +00:00
struct ast_channel * parkee ;
2006-08-21 02:11:39 +00:00
int res = 0 ;
2006-05-22 16:43:43 +00:00
set_peers ( & parker , & parkee , peer , chan , sense ) ;
/* Setup the exten/priority to be s/1 since we don't know
where this call should return */
strcpy ( chan - > exten , " s " ) ;
chan - > priority = 1 ;
if ( chan - > _state ! = AST_STATE_UP )
res = ast_answer ( chan ) ;
if ( ! res )
res = ast_safe_sleep ( chan , 1000 ) ;
if ( ! res )
res = ast_park_call ( parkee , parker , 0 , NULL ) ;
2006-08-21 02:11:39 +00:00
2006-05-22 16:43:43 +00:00
if ( ! res ) {
if ( sense = = FEATURE_SENSE_CHAN )
res = AST_PBX_NO_HANGUP_PEER ;
else
res = AST_PBX_KEEPALIVE ;
}
return res ;
}
2008-05-12 18:39:09 +00:00
/*! \brief Play message to both caller and callee in bridged call, plays synchronously, autoservicing the
other channel during the message , so please don ' t use this for very long messages
*/
static int play_message_in_bridged_call ( struct ast_channel * caller_chan , struct ast_channel * callee_chan , const char * audiofile )
{
/* First play for caller, put other channel on auto service */
if ( ast_autoservice_start ( callee_chan ) )
return - 1 ;
if ( ast_stream_and_wait ( caller_chan , audiofile , " " ) ) {
ast_log ( LOG_WARNING , " Failed to play automon message! \n " ) ;
ast_autoservice_stop ( callee_chan ) ;
return - 1 ;
}
if ( ast_autoservice_stop ( callee_chan ) )
return - 1 ;
/* Then play for callee, put other channel on auto service */
if ( ast_autoservice_start ( caller_chan ) )
return - 1 ;
if ( ast_stream_and_wait ( callee_chan , audiofile , " " ) ) {
ast_log ( LOG_WARNING , " Failed to play automon message ! \n " ) ;
ast_autoservice_stop ( caller_chan ) ;
return - 1 ;
}
if ( ast_autoservice_stop ( caller_chan ) )
return - 1 ;
return ( 0 ) ;
}
2007-08-07 23:04:01 +00:00
/*!
* \ brief Monitor a channel by DTMF
* \ param chan channel requesting monitor
* \ param peer channel to be monitored
* \ param config
* \ param code
2007-09-05 16:31:39 +00:00
* \ param sense feature options
*
2007-08-23 20:20:17 +00:00
* \ param data
2007-08-07 23:04:01 +00:00
* Check monitor app enabled , setup channels , both caller / callee chans not null
* get TOUCH_MONITOR variable for filename if exists , exec monitor app .
2008-04-08 17:32:42 +00:00
* \ retval AST_FEATURE_RETURN_SUCCESS on success .
2007-08-07 23:04:01 +00:00
* \ retval - 1 on error .
*/
2007-08-23 20:20:17 +00:00
static int builtin_automonitor ( struct ast_channel * chan , struct ast_channel * peer , struct ast_bridge_config * config , char * code , int sense , void * data )
2005-01-05 19:56:47 +00:00
{
2005-12-08 18:18:59 +00:00
char * caller_chan_id = NULL , * callee_chan_id = NULL , * args = NULL , * touch_filename = NULL ;
2005-01-10 04:03:30 +00:00
int x = 0 ;
size_t len ;
2006-04-18 13:05:48 +00:00
struct ast_channel * caller_chan , * callee_chan ;
2008-05-12 18:39:09 +00:00
const char * automon_message_start = NULL ;
const char * automon_message_stop = NULL ;
2005-01-11 18:24:27 +00:00
2005-01-10 04:03:30 +00:00
if ( ! monitor_ok ) {
ast_log ( LOG_ERROR , " Cannot record the call. The monitor application is disabled. \n " ) ;
return - 1 ;
}
2005-01-05 19:56:47 +00:00
2006-04-16 18:37:01 +00:00
if ( ! monitor_app & & ! ( monitor_app = pbx_findapp ( " Monitor " ) ) ) {
METERMAIDS:
-----------
- Adding devicestate providers, a new architecture to add non-channel related
device state information, like parking lots, queues, meetmes, vending machines
and Windows 98 reboots (lots of blinking on those lights)
- Adding provider for parking lots, so you can subscribe to the status of a
parking lot
- Adding provider for meetme, so you can have a blinking lamp for a meetme
( Example: exten => edvina,hint,meetme:1234 )
- Adding support for directed parking - set the PARKINGEXTEN before you manually
call Park() and you will be parked on that space. If it's occupied, dialplan
execution will continue.
This work was sponsored by Voop A/S - www.voop.com
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@36055 65c4cc65-6c06-0410-ace0-fbb531ad65f3
2006-06-26 16:43:21 +00:00
monitor_ok = 0 ;
2006-04-16 18:37:01 +00:00
ast_log ( LOG_ERROR , " Cannot record the call. The monitor application is disabled. \n " ) ;
return - 1 ;
2005-01-10 04:03:30 +00:00
}
2006-04-16 19:26:57 +00:00
set_peers ( & caller_chan , & callee_chan , peer , chan , sense ) ;
2008-05-12 18:39:09 +00:00
if ( caller_chan ) { /* Find extra messages */
automon_message_start = pbx_builtin_getvar_helper ( caller_chan , " TOUCH_MONITOR_MESSAGE_START " ) ;
automon_message_stop = pbx_builtin_getvar_helper ( caller_chan , " TOUCH_MONITOR_MESSAGE_STOP " ) ;
}
2006-04-16 19:26:57 +00:00
2008-05-12 18:39:09 +00:00
if ( ! ast_strlen_zero ( courtesytone ) ) { /* Play courtesy tone if configured */
if ( play_message_in_bridged_call ( caller_chan , callee_chan , courtesytone ) = = - 1 ) {
2006-04-16 22:46:00 +00:00
return - 1 ;
2005-01-05 22:38:07 +00:00
}
2005-01-10 04:03:30 +00:00
}
2005-01-11 18:24:27 +00:00
if ( callee_chan - > monitor ) {
2007-07-26 15:49:18 +00:00
ast_verb ( 4 , " User hit '%s' to stop recording call. \n " , code ) ;
2008-05-12 18:39:09 +00:00
if ( ! ast_strlen_zero ( automon_message_stop ) ) {
play_message_in_bridged_call ( caller_chan , callee_chan , automon_message_stop ) ;
}
2008-01-23 23:09:11 +00:00
callee_chan - > monitor - > stop ( callee_chan , 1 ) ;
2008-04-08 17:32:42 +00:00
return AST_FEATURE_RETURN_SUCCESS ;
2005-01-05 19:56:47 +00:00
}
2005-01-11 18:24:27 +00:00
if ( caller_chan & & callee_chan ) {
2005-12-03 19:25:33 +00:00
const char * touch_format = pbx_builtin_getvar_helper ( caller_chan , " TOUCH_MONITOR_FORMAT " ) ;
const char * touch_monitor = pbx_builtin_getvar_helper ( caller_chan , " TOUCH_MONITOR " ) ;
2007-10-15 20:08:04 +00:00
const char * touch_monitor_prefix = pbx_builtin_getvar_helper ( caller_chan , " TOUCH_MONITOR_PREFIX " ) ;
2005-12-03 19:25:33 +00:00
2005-05-16 00:43:16 +00:00
if ( ! touch_format )
touch_format = pbx_builtin_getvar_helper ( callee_chan , " TOUCH_MONITOR_FORMAT " ) ;
2005-01-10 04:03:30 +00:00
if ( ! touch_monitor )
2005-01-11 18:24:27 +00:00
touch_monitor = pbx_builtin_getvar_helper ( callee_chan , " TOUCH_MONITOR " ) ;
2005-12-08 18:18:59 +00:00
2007-10-15 20:08:04 +00:00
if ( ! touch_monitor_prefix )
touch_monitor_prefix = pbx_builtin_getvar_helper ( callee_chan , " TOUCH_MONITOR_PREFIX " ) ;
2005-01-10 04:03:30 +00:00
if ( touch_monitor ) {
len = strlen ( touch_monitor ) + 50 ;
args = alloca ( len ) ;
2005-12-08 18:18:59 +00:00
touch_filename = alloca ( len ) ;
2007-10-15 20:08:04 +00:00
snprintf ( touch_filename , len , " %s-%ld-%s " , S_OR ( touch_monitor_prefix , " auto " ) , ( long ) time ( NULL ) , touch_monitor ) ;
2008-02-26 14:51:21 +00:00
snprintf ( args , len , " %s,%s,m " , S_OR ( touch_format , " wav " ) , touch_filename ) ;
2005-01-10 04:03:30 +00:00
} else {
2006-04-21 10:47:07 +00:00
caller_chan_id = ast_strdupa ( S_OR ( caller_chan - > cid . cid_num , caller_chan - > name ) ) ;
callee_chan_id = ast_strdupa ( S_OR ( callee_chan - > cid . cid_num , callee_chan - > name ) ) ;
2005-01-11 18:24:27 +00:00
len = strlen ( caller_chan_id ) + strlen ( callee_chan_id ) + 50 ;
2005-01-10 04:03:30 +00:00
args = alloca ( len ) ;
2005-12-08 18:18:59 +00:00
touch_filename = alloca ( len ) ;
2007-10-15 20:08:04 +00:00
snprintf ( touch_filename , len , " %s-%ld-%s-%s " , S_OR ( touch_monitor_prefix , " auto " ) , ( long ) time ( NULL ) , caller_chan_id , callee_chan_id ) ;
2008-02-26 14:51:21 +00:00
snprintf ( args , len , " %s,%s,m " , S_OR ( touch_format , " wav " ) , touch_filename ) ;
2005-01-10 04:03:30 +00:00
}
Merge changes from team/russell/issue_5841:
This patch adds a "Bridge" Manager action, as well as a "Bridge" dialplan
application. The manager action will allow you to steal two active channels
in the system and bridge them together. Then, the one that did not hang up
will continue in the dialplan. Using the application will bridge the calling
channel to an arbitrary channel in the system. Whichever channel does not
hang up here will continue in the dialplan, as well.
This patch has been touched by a bunch of people over the course of a couple
years. Please forgive me if I have missed your name in the history of things.
The most recent patch came from issue #5841, but there is also a reference to
an earlier version of this patch from issue #4297. The people involved in writing
and/or reviewing the code include at least: twisted, mflorrel, heath1444, davetroy,
tim_ringenbach, moy, tmancill, serge-v, and me. There are also positive test
reports from many people.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@61281 65c4cc65-6c06-0410-ace0-fbb531ad65f3
2007-04-10 20:44:44 +00:00
for ( x = 0 ; x < strlen ( args ) ; x + + ) {
2005-01-10 04:03:30 +00:00
if ( args [ x ] = = ' / ' )
args [ x ] = ' - ' ;
2006-04-14 23:20:29 +00:00
}
2005-01-10 04:03:30 +00:00
2007-07-26 15:49:18 +00:00
ast_verb ( 4 , " User hit '%s' to record call. filename: %s \n " , code , args ) ;
2005-01-10 04:03:30 +00:00
2006-03-30 21:29:39 +00:00
pbx_exec ( callee_chan , monitor_app , args ) ;
2005-12-08 18:18:59 +00:00
pbx_builtin_setvar_helper ( callee_chan , " TOUCH_MONITOR_OUTPUT " , touch_filename ) ;
pbx_builtin_setvar_helper ( caller_chan , " TOUCH_MONITOR_OUTPUT " , touch_filename ) ;
2008-05-12 18:39:09 +00:00
if ( ! ast_strlen_zero ( automon_message_start ) ) { /* Play start message for both channels */
play_message_in_bridged_call ( caller_chan , callee_chan , automon_message_start ) ;
}
2005-12-08 18:18:59 +00:00
2008-04-08 17:32:42 +00:00
return AST_FEATURE_RETURN_SUCCESS ;
2005-01-10 04:03:30 +00:00
}
ast_log ( LOG_NOTICE , " Cannot record the call. One or both channels have gone away. \n " ) ;
2005-01-05 19:56:47 +00:00
return - 1 ;
}
2007-11-30 21:19:57 +00:00
static int builtin_automixmonitor ( struct ast_channel * chan , struct ast_channel * peer , struct ast_bridge_config * config , char * code , int sense , void * data )
{
char * caller_chan_id = NULL , * callee_chan_id = NULL , * args = NULL , * touch_filename = NULL ;
int x = 0 ;
size_t len ;
struct ast_channel * caller_chan , * callee_chan ;
const char * mixmonitor_spy_type = " MixMonitor " ;
int count = 0 ;
if ( ! mixmonitor_ok ) {
ast_log ( LOG_ERROR , " Cannot record the call. The mixmonitor application is disabled. \n " ) ;
return - 1 ;
}
if ( ! ( mixmonitor_app = pbx_findapp ( " MixMonitor " ) ) ) {
mixmonitor_ok = 0 ;
ast_log ( LOG_ERROR , " Cannot record the call. The mixmonitor application is disabled. \n " ) ;
return - 1 ;
}
set_peers ( & caller_chan , & callee_chan , peer , chan , sense ) ;
if ( ! ast_strlen_zero ( courtesytone ) ) {
if ( ast_autoservice_start ( callee_chan ) )
return - 1 ;
if ( ast_stream_and_wait ( caller_chan , courtesytone , " " ) ) {
ast_log ( LOG_WARNING , " Failed to play courtesy tone! \n " ) ;
ast_autoservice_stop ( callee_chan ) ;
return - 1 ;
}
if ( ast_autoservice_stop ( callee_chan ) )
return - 1 ;
}
ast_channel_lock ( callee_chan ) ;
count = ast_channel_audiohook_count_by_source ( callee_chan , mixmonitor_spy_type , AST_AUDIOHOOK_TYPE_SPY ) ;
ast_channel_unlock ( callee_chan ) ;
2008-04-21 23:42:45 +00:00
/* This means a mixmonitor is attached to the channel, running or not is unknown. */
2007-11-30 21:19:57 +00:00
if ( count > 0 ) {
2007-12-14 14:48:38 +00:00
ast_verb ( 3 , " User hit '%s' to stop recording call. \n " , code ) ;
2007-11-30 21:19:57 +00:00
2008-04-21 23:42:45 +00:00
/* Make sure they are running */
2007-11-30 21:19:57 +00:00
ast_channel_lock ( callee_chan ) ;
count = ast_channel_audiohook_count_by_source_running ( callee_chan , mixmonitor_spy_type , AST_AUDIOHOOK_TYPE_SPY ) ;
ast_channel_unlock ( callee_chan ) ;
if ( count > 0 ) {
if ( ! stopmixmonitor_ok ) {
ast_log ( LOG_ERROR , " Cannot stop recording the call. The stopmixmonitor application is disabled. \n " ) ;
return - 1 ;
}
if ( ! ( stopmixmonitor_app = pbx_findapp ( " StopMixMonitor " ) ) ) {
stopmixmonitor_ok = 0 ;
ast_log ( LOG_ERROR , " Cannot stop recording the call. The stopmixmonitor application is disabled. \n " ) ;
return - 1 ;
} else {
pbx_exec ( callee_chan , stopmixmonitor_app , " " ) ;
2008-04-08 17:32:42 +00:00
return AST_FEATURE_RETURN_SUCCESS ;
2007-11-30 21:19:57 +00:00
}
}
ast_log ( LOG_WARNING , " Stopped MixMonitors are attached to the channel. \n " ) ;
}
if ( caller_chan & & callee_chan ) {
const char * touch_format = pbx_builtin_getvar_helper ( caller_chan , " TOUCH_MIXMONITOR_FORMAT " ) ;
const char * touch_monitor = pbx_builtin_getvar_helper ( caller_chan , " TOUCH_MIXMONITOR " ) ;
if ( ! touch_format )
touch_format = pbx_builtin_getvar_helper ( callee_chan , " TOUCH_MIXMONITOR_FORMAT " ) ;
if ( ! touch_monitor )
touch_monitor = pbx_builtin_getvar_helper ( callee_chan , " TOUCH_MIXMONITOR " ) ;
if ( touch_monitor ) {
len = strlen ( touch_monitor ) + 50 ;
args = alloca ( len ) ;
touch_filename = alloca ( len ) ;
snprintf ( touch_filename , len , " auto-%ld-%s " , ( long ) time ( NULL ) , touch_monitor ) ;
snprintf ( args , len , " %s.%s,b " , touch_filename , ( touch_format ) ? touch_format : " wav " ) ;
} else {
caller_chan_id = ast_strdupa ( S_OR ( caller_chan - > cid . cid_num , caller_chan - > name ) ) ;
callee_chan_id = ast_strdupa ( S_OR ( callee_chan - > cid . cid_num , callee_chan - > name ) ) ;
len = strlen ( caller_chan_id ) + strlen ( callee_chan_id ) + 50 ;
args = alloca ( len ) ;
touch_filename = alloca ( len ) ;
snprintf ( touch_filename , len , " auto-%ld-%s-%s " , ( long ) time ( NULL ) , caller_chan_id , callee_chan_id ) ;
snprintf ( args , len , " %s.%s,b " , touch_filename , S_OR ( touch_format , " wav " ) ) ;
}
for ( x = 0 ; x < strlen ( args ) ; x + + ) {
if ( args [ x ] = = ' / ' )
args [ x ] = ' - ' ;
}
2007-12-14 14:48:38 +00:00
ast_verb ( 3 , " User hit '%s' to record call. filename: %s \n " , code , touch_filename ) ;
2007-11-30 21:19:57 +00:00
pbx_exec ( callee_chan , mixmonitor_app , args ) ;
pbx_builtin_setvar_helper ( callee_chan , " TOUCH_MIXMONITOR_OUTPUT " , touch_filename ) ;
pbx_builtin_setvar_helper ( caller_chan , " TOUCH_MIXMONITOR_OUTPUT " , touch_filename ) ;
2008-04-08 17:32:42 +00:00
return AST_FEATURE_RETURN_SUCCESS ;
2007-11-30 21:19:57 +00:00
}
ast_log ( LOG_NOTICE , " Cannot record the call. One or both channels have gone away. \n " ) ;
return - 1 ;
}
2007-08-23 20:20:17 +00:00
static int builtin_disconnect ( struct ast_channel * chan , struct ast_channel * peer , struct ast_bridge_config * config , char * code , int sense , void * data )
2005-01-04 04:01:40 +00:00
{
2007-07-26 15:49:18 +00:00
ast_verb ( 4 , " User hit '%s' to disconnect call. \n " , code ) ;
2008-04-08 17:32:42 +00:00
return AST_FEATURE_RETURN_HANGUP ;
2005-01-04 04:01:40 +00:00
}
2006-04-16 19:26:57 +00:00
static int finishup ( struct ast_channel * chan )
{
2008-03-04 23:04:29 +00:00
ast_indicate ( chan , AST_CONTROL_UNHOLD ) ;
return ast_autoservice_stop ( chan ) ;
2006-04-16 19:26:57 +00:00
}
2007-08-07 23:04:01 +00:00
/*!
* \ brief Find the context for the transfer
* \ param transferer
* \ param transferee
2007-09-05 16:31:39 +00:00
*
2007-08-07 23:04:01 +00:00
* Grab the TRANSFER_CONTEXT , if fails try grabbing macrocontext .
* \ return a context string
*/
2006-04-16 19:26:57 +00:00
static const char * real_ctx ( struct ast_channel * transferer , struct ast_channel * transferee )
{
2008-03-04 23:04:29 +00:00
const char * s = pbx_builtin_getvar_helper ( transferer , " TRANSFER_CONTEXT " ) ;
if ( ast_strlen_zero ( s ) ) {
s = pbx_builtin_getvar_helper ( transferee , " TRANSFER_CONTEXT " ) ;
}
if ( ast_strlen_zero ( s ) ) { /* Use the non-macro context to transfer the call XXX ? */
s = transferer - > macrocontext ;
}
if ( ast_strlen_zero ( s ) ) {
s = transferer - > context ;
}
return s ;
2006-04-16 19:26:57 +00:00
}
2007-08-07 23:04:01 +00:00
/*!
* \ brief Blind transfer user to another extension
2007-09-05 16:31:39 +00:00
* \ param chan channel to be transfered
* \ param peer channel initiated blind transfer
2007-08-07 23:04:01 +00:00
* \ param config
* \ param code
2007-08-23 20:20:17 +00:00
* \ param data
2007-09-05 16:31:39 +00:00
* \ param sense feature options
*
* Place chan on hold , check if transferred to parkinglot extension ,
2007-08-07 23:04:01 +00:00
* otherwise check extension exists and transfer caller .
2008-04-08 17:32:42 +00:00
* \ retval AST_FEATURE_RETURN_SUCCESS .
2007-08-07 23:04:01 +00:00
* \ retval - 1 on failure .
*/
2007-08-23 20:20:17 +00:00
static int builtin_blindtransfer ( struct ast_channel * chan , struct ast_channel * peer , struct ast_bridge_config * config , char * code , int sense , void * data )
2005-01-04 04:01:40 +00:00
{
struct ast_channel * transferer ;
struct ast_channel * transferee ;
2005-12-03 19:25:33 +00:00
const char * transferer_real_context ;
2006-04-16 19:56:08 +00:00
char xferto [ 256 ] ;
2005-01-04 04:01:40 +00:00
int res ;
2006-04-16 19:26:57 +00:00
set_peers ( & transferer , & transferee , peer , chan , sense ) ;
transferer_real_context = real_ctx ( transferer , transferee ) ;
2006-04-16 19:41:12 +00:00
/* Start autoservice on chan while we talk to the originator */
2005-01-04 04:01:40 +00:00
ast_autoservice_start ( transferee ) ;
2006-07-19 20:44:39 +00:00
ast_indicate ( transferee , AST_CONTROL_HOLD ) ;
2005-01-04 04:01:40 +00:00
2006-04-16 19:56:08 +00:00
memset ( xferto , 0 , sizeof ( xferto ) ) ;
2005-02-17 20:04:10 +00:00
2005-01-04 04:01:40 +00:00
/* Transfer */
2006-11-17 23:18:51 +00:00
res = ast_stream_and_wait ( transferer , " pbx-transfer " , AST_DIGIT_ANY ) ;
2006-04-16 21:41:06 +00:00
if ( res < 0 ) {
finishup ( transferee ) ;
return - 1 ; /* error ? */
2005-01-04 04:01:40 +00:00
}
2006-04-18 13:05:48 +00:00
if ( res > 0 ) /* If they've typed a digit already, handle it */
xferto [ 0 ] = ( char ) res ;
2005-01-04 04:01:40 +00:00
2005-02-17 20:04:10 +00:00
ast_stopstream ( transferer ) ;
2006-04-16 19:56:08 +00:00
res = ast_app_dtget ( transferer , transferer_real_context , xferto , sizeof ( xferto ) , 100 , transferdigittimeout ) ;
2006-04-16 21:41:06 +00:00
if ( res < 0 ) { /* hangup, would be 0 for invalid and 1 for valid */
finishup ( transferee ) ;
2005-01-04 04:01:40 +00:00
return res ;
}
2006-04-16 19:56:08 +00:00
if ( ! strcmp ( xferto , ast_parking_ext ( ) ) ) {
2006-04-16 21:41:06 +00:00
res = finishup ( transferee ) ;
2005-01-17 12:37:55 +00:00
if ( res )
2005-01-04 04:01:40 +00:00
res = - 1 ;
2006-04-16 21:41:06 +00:00
else if ( ! ast_park_call ( transferee , transferer , 0 , NULL ) ) { /* success */
2005-01-04 04:01:40 +00:00
/* We return non-zero, but tell the PBX not to hang the channel when
the thread dies - - We have to be careful now though . We are responsible for
hanging up the channel , else it will never be hung up ! */
2007-11-21 15:17:12 +00:00
2006-04-14 23:20:29 +00:00
return ( transferer = = peer ) ? AST_PBX_KEEPALIVE : AST_PBX_NO_HANGUP_PEER ;
2005-01-04 04:01:40 +00:00
} else {
ast_log ( LOG_WARNING , " Unable to park call %s \n " , transferee - > name ) ;
}
2006-04-17 04:31:21 +00:00
/*! \todo XXX Maybe we should have another message here instead of invalid extension XXX */
2006-04-16 19:56:08 +00:00
} else if ( ast_exists_extension ( transferee , transferer_real_context , xferto , 1 , transferer - > cid . cid_num ) ) {
2008-07-18 15:38:22 +00:00
pbx_builtin_setvar_helper ( transferer , " BLINDTRANSFER " , transferee - > name ) ;
pbx_builtin_setvar_helper ( transferee , " BLINDTRANSFER " , transferer - > name ) ;
2006-04-16 21:41:06 +00:00
res = finishup ( transferee ) ;
2007-03-30 14:37:21 +00:00
if ( ! transferer - > cdr ) {
transferer - > cdr = ast_cdr_alloc ( ) ;
2007-03-30 17:57:47 +00:00
if ( transferer ) {
ast_cdr_init ( transferer - > cdr , transferer ) ; /* initilize our channel's cdr */
ast_cdr_start ( transferer - > cdr ) ;
}
}
if ( transferer - > cdr ) {
ast_cdr_setdestchan ( transferer - > cdr , transferee - > name ) ;
ast_cdr_setapp ( transferer - > cdr , " BLINDTRANSFER " , " " ) ;
2007-03-30 14:37:21 +00:00
}
2007-08-14 15:30:03 +00:00
if ( ! transferee - > pbx ) {
/* Doh! Use our handy async_goto functions */
2007-12-14 14:48:38 +00:00
ast_verb ( 3 , " Transferring %s to '%s' (context %s) priority 1 \n "
2007-08-14 15:30:03 +00:00
, transferee - > name , xferto , transferer_real_context ) ;
if ( ast_async_goto ( transferee , transferer_real_context , xferto , 1 ) )
ast_log ( LOG_WARNING , " Async goto failed :-( \n " ) ;
} else {
/* Set the channel's new extension, since it exists, using transferer context */
set_c_e_p ( transferee , transferer_real_context , xferto , 0 ) ;
}
2005-04-22 02:55:14 +00:00
check_goto_on_transfer ( transferer ) ;
2005-01-04 04:01:40 +00:00
return res ;
} else {
2007-07-26 15:49:18 +00:00
ast_verb ( 3 , " Unable to find extension '%s' in context '%s' \n " , xferto , transferer_real_context ) ;
2005-01-04 04:01:40 +00:00
}
Merge changes from team/russell/issue_5841:
This patch adds a "Bridge" Manager action, as well as a "Bridge" dialplan
application. The manager action will allow you to steal two active channels
in the system and bridge them together. Then, the one that did not hang up
will continue in the dialplan. Using the application will bridge the calling
channel to an arbitrary channel in the system. Whichever channel does not
hang up here will continue in the dialplan, as well.
This patch has been touched by a bunch of people over the course of a couple
years. Please forgive me if I have missed your name in the history of things.
The most recent patch came from issue #5841, but there is also a reference to
an earlier version of this patch from issue #4297. The people involved in writing
and/or reviewing the code include at least: twisted, mflorrel, heath1444, davetroy,
tim_ringenbach, moy, tmancill, serge-v, and me. There are also positive test
reports from many people.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@61281 65c4cc65-6c06-0410-ace0-fbb531ad65f3
2007-04-10 20:44:44 +00:00
if ( ast_stream_and_wait ( transferer , xferfailsound , AST_DIGIT_ANY ) < 0 ) {
2006-04-16 21:41:06 +00:00
finishup ( transferee ) ;
return - 1 ;
2005-01-04 04:01:40 +00:00
}
ast_stopstream ( transferer ) ;
2006-04-16 21:41:06 +00:00
res = finishup ( transferee ) ;
2005-01-04 04:01:40 +00:00
if ( res ) {
2007-07-26 15:49:18 +00:00
ast_verb ( 2 , " Hungup during autoservice stop on '%s' \n " , transferee - > name ) ;
2005-01-04 04:01:40 +00:00
return res ;
}
2008-04-08 17:32:42 +00:00
return AST_FEATURE_RETURN_SUCCESS ;
2005-01-04 04:01:40 +00:00
}
2007-08-07 23:04:01 +00:00
/*!
* \ brief make channels compatible
* \ param c
* \ param newchan
* \ retval 0 on success .
* \ retval - 1 on failure .
*/
2006-04-18 13:05:48 +00:00
static int check_compat ( struct ast_channel * c , struct ast_channel * newchan )
{
if ( ast_channel_make_compatible ( c , newchan ) < 0 ) {
ast_log ( LOG_WARNING , " Had to drop call because I couldn't make %s compatible with %s \n " ,
c - > name , newchan - > name ) ;
ast_hangup ( newchan ) ;
return - 1 ;
}
return 0 ;
}
2007-08-07 23:04:01 +00:00
/*!
* \ brief Attended transfer
2007-09-05 16:31:39 +00:00
* \ param chan transfered user
* \ param peer person transfering call
2007-08-07 23:04:01 +00:00
* \ param config
* \ param code
2007-09-05 16:31:39 +00:00
* \ param sense feature options
*
2007-08-23 20:20:17 +00:00
* \ param data
2007-08-07 23:04:01 +00:00
* Get extension to transfer to , if you cannot generate channel ( or find extension )
* return to host channel . After called channel answered wait for hangup of transferer ,
* bridge call between transfer peer ( taking them off hold ) to attended transfer channel .
2007-09-05 16:31:39 +00:00
*
* \ return - 1 on failure
2007-08-07 23:04:01 +00:00
*/
2007-08-23 20:20:17 +00:00
static int builtin_atxfer ( struct ast_channel * chan , struct ast_channel * peer , struct ast_bridge_config * config , char * code , int sense , void * data )
2005-01-05 19:56:47 +00:00
{
struct ast_channel * transferer ;
struct ast_channel * transferee ;
2005-12-03 19:25:33 +00:00
const char * transferer_real_context ;
2006-07-19 20:44:39 +00:00
char xferto [ 256 ] = " " ;
2005-01-05 19:56:47 +00:00
int res ;
2006-04-18 13:05:48 +00:00
int outstate = 0 ;
struct ast_channel * newchan ;
struct ast_channel * xferchan ;
2005-01-05 19:56:47 +00:00
struct ast_bridge_thread_obj * tobj ;
2006-04-18 13:05:48 +00:00
struct ast_bridge_config bconfig ;
struct ast_frame * f ;
int l ;
2005-01-05 19:56:47 +00:00
2007-06-14 19:39:12 +00:00
ast_debug ( 1 , " Executing Attended Transfer %s, %s (sense=%d) \n " , chan - > name , peer - > name , sense ) ;
2006-04-16 19:26:57 +00:00
set_peers ( & transferer , & transferee , peer , chan , sense ) ;
2008-03-04 23:04:29 +00:00
transferer_real_context = real_ctx ( transferer , transferee ) ;
2006-04-16 19:41:12 +00:00
/* Start autoservice on chan while we talk to the originator */
2005-01-05 19:56:47 +00:00
ast_autoservice_start ( transferee ) ;
2006-07-19 20:44:39 +00:00
ast_indicate ( transferee , AST_CONTROL_HOLD ) ;
2005-01-05 19:56:47 +00:00
/* Transfer */
2006-11-17 23:18:51 +00:00
res = ast_stream_and_wait ( transferer , " pbx-transfer " , AST_DIGIT_ANY ) ;
2006-04-16 22:22:53 +00:00
if ( res < 0 ) {
finishup ( transferee ) ;
return res ;
2006-04-18 13:05:48 +00:00
}
if ( res > 0 ) /* If they've typed a digit already, handle it */
2006-04-16 22:22:53 +00:00
xferto [ 0 ] = ( char ) res ;
2006-04-16 19:26:57 +00:00
2006-04-16 22:22:53 +00:00
/* this is specific of atxfer */
res = ast_app_dtget ( transferer , transferer_real_context , xferto , sizeof ( xferto ) , 100 , transferdigittimeout ) ;
2008-03-04 23:04:29 +00:00
if ( res < 0 ) { /* hangup, would be 0 for invalid and 1 for valid */
finishup ( transferee ) ;
return res ;
}
2006-04-16 23:05:42 +00:00
if ( res = = 0 ) {
2006-04-16 22:22:53 +00:00
ast_log ( LOG_WARNING , " Did not read data. \n " ) ;
2006-04-16 23:05:42 +00:00
finishup ( transferee ) ;
2006-11-17 23:18:51 +00:00
if ( ast_stream_and_wait ( transferer , " beeperr " , " " ) )
2006-04-16 22:22:53 +00:00
return - 1 ;
2008-04-08 17:32:42 +00:00
return AST_FEATURE_RETURN_SUCCESS ;
2006-04-16 23:05:42 +00:00
}
2006-04-18 13:05:48 +00:00
2006-04-16 23:05:42 +00:00
/* valid extension, res == 1 */
2006-04-18 13:05:48 +00:00
if ( ! ast_exists_extension ( transferer , transferer_real_context , xferto , 1 , transferer - > cid . cid_num ) ) {
ast_log ( LOG_WARNING , " Extension %s does not exist in context %s \n " , xferto , transferer_real_context ) ;
finishup ( transferee ) ;
2006-11-17 23:18:51 +00:00
if ( ast_stream_and_wait ( transferer , " beeperr " , " " ) )
2006-04-18 13:05:48 +00:00
return - 1 ;
2008-04-08 17:32:42 +00:00
return AST_FEATURE_RETURN_SUCCESS ;
2006-04-18 13:05:48 +00:00
}
l = strlen ( xferto ) ;
snprintf ( xferto + l , sizeof ( xferto ) - l , " @%s/n " , transferer_real_context ) ; /* append context */
2008-07-30 16:40:43 +00:00
/* If we are performing an attended transfer and we have two channels involved then
copy sound file information to play upon attended transfer completion */
if ( transferee ) {
const char * chan1_attended_sound = pbx_builtin_getvar_helper ( transferer , " ATTENDED_TRANSFER_COMPLETE_SOUND " ) ;
const char * chan2_attended_sound = pbx_builtin_getvar_helper ( transferee , " ATTENDED_TRANSFER_COMPLETE_SOUND " ) ;
if ( ! ast_strlen_zero ( chan1_attended_sound ) ) {
pbx_builtin_setvar_helper ( transferer , " BRIDGE_PLAY_SOUND " , chan1_attended_sound ) ;
}
if ( ! ast_strlen_zero ( chan2_attended_sound ) ) {
pbx_builtin_setvar_helper ( transferee , " BRIDGE_PLAY_SOUND " , chan2_attended_sound ) ;
}
}
2007-05-01 22:24:51 +00:00
newchan = ast_feature_request_and_dial ( transferer , transferee , " Local " , ast_best_codec ( transferer - > nativeformats ) ,
2008-02-27 17:31:31 +00:00
xferto , atxfernoanswertimeout , & outstate , transferer - > cid . cid_num , transferer - > cid . cid_name , 1 , transferer - > language ) ;
2007-05-01 22:24:51 +00:00
if ( ! ast_check_hangup ( transferer ) ) {
/* Transferer is up - old behaviour */
ast_indicate ( transferer , - 1 ) ;
if ( ! newchan ) {
finishup ( transferee ) ;
/* any reason besides user requested cancel and busy triggers the failed sound */
if ( outstate ! = AST_CONTROL_UNHOLD & & outstate ! = AST_CONTROL_BUSY & &
2006-11-17 23:18:51 +00:00
ast_stream_and_wait ( transferer , xferfailsound , " " ) )
2007-05-01 22:24:51 +00:00
return - 1 ;
if ( ast_stream_and_wait ( transferer , xfersound , " " ) )
ast_log ( LOG_WARNING , " Failed to play transfer sound! \n " ) ;
2008-04-08 17:32:42 +00:00
return AST_FEATURE_RETURN_SUCCESS ;
2007-05-01 22:24:51 +00:00
}
2007-10-02 18:59:39 +00:00
if ( check_compat ( transferer , newchan ) ) {
/* we do mean transferee here, NOT transferer */
finishup ( transferee ) ;
2006-04-18 13:05:48 +00:00
return - 1 ;
2007-10-02 18:59:39 +00:00
}
2007-05-01 22:24:51 +00:00
memset ( & bconfig , 0 , sizeof ( struct ast_bridge_config ) ) ;
ast_set_flag ( & ( bconfig . features_caller ) , AST_FEATURE_DISCONNECT ) ;
ast_set_flag ( & ( bconfig . features_callee ) , AST_FEATURE_DISCONNECT ) ;
res = ast_bridge_call ( transferer , newchan , & bconfig ) ;
2007-08-01 15:39:54 +00:00
if ( ast_check_hangup ( newchan ) | | ! ast_check_hangup ( transferer ) ) {
2007-05-01 22:24:51 +00:00
ast_hangup ( newchan ) ;
if ( ast_stream_and_wait ( transferer , xfersound , " " ) )
ast_log ( LOG_WARNING , " Failed to play transfer sound! \n " ) ;
finishup ( transferee ) ;
transferer - > _softhangup = 0 ;
2008-04-08 17:32:42 +00:00
return AST_FEATURE_RETURN_SUCCESS ;
2007-05-01 22:24:51 +00:00
}
2007-10-02 18:59:39 +00:00
if ( check_compat ( transferee , newchan ) ) {
finishup ( transferee ) ;
2007-05-01 22:24:51 +00:00
return - 1 ;
2007-10-02 18:59:39 +00:00
}
2007-05-01 22:24:51 +00:00
ast_indicate ( transferee , AST_CONTROL_UNHOLD ) ;
if ( ( ast_autoservice_stop ( transferee ) < 0 )
| | ( ast_waitfordigit ( transferee , 100 ) < 0 )
| | ( ast_waitfordigit ( newchan , 100 ) < 0 )
| | ast_check_hangup ( transferee )
| | ast_check_hangup ( newchan ) ) {
ast_hangup ( newchan ) ;
return - 1 ;
}
xferchan = ast_channel_alloc ( 0 , AST_STATE_DOWN , 0 , 0 , " " , " " , " " , 0 , " Transfered/%s " , transferee - > name ) ;
if ( ! xferchan ) {
ast_hangup ( newchan ) ;
return - 1 ;
}
/* Make formats okay */
2008-03-11 19:23:28 +00:00
xferchan - > visible_indication = transferer - > visible_indication ;
2007-05-01 22:24:51 +00:00
xferchan - > readformat = transferee - > readformat ;
xferchan - > writeformat = transferee - > writeformat ;
ast_channel_masquerade ( xferchan , transferee ) ;
ast_explicit_goto ( xferchan , transferee - > context , transferee - > exten , transferee - > priority ) ;
xferchan - > _state = AST_STATE_UP ;
ast_clear_flag ( xferchan , AST_FLAGS_ALL ) ;
xferchan - > _softhangup = 0 ;
if ( ( f = ast_read ( xferchan ) ) )
ast_frfree ( f ) ;
newchan - > _state = AST_STATE_UP ;
ast_clear_flag ( newchan , AST_FLAGS_ALL ) ;
newchan - > _softhangup = 0 ;
if ( ! ( tobj = ast_calloc ( 1 , sizeof ( * tobj ) ) ) ) {
ast_hangup ( xferchan ) ;
ast_hangup ( newchan ) ;
return - 1 ;
}
2008-01-18 16:58:50 +00:00
tobj - > chan = newchan ;
tobj - > peer = xferchan ;
2007-05-01 22:24:51 +00:00
tobj - > bconfig = * config ;
2006-04-18 13:05:48 +00:00
2007-05-01 22:24:51 +00:00
if ( ast_stream_and_wait ( newchan , xfersound , " " ) )
2006-05-08 11:22:00 +00:00
ast_log ( LOG_WARNING , " Failed to play transfer sound! \n " ) ;
2007-05-01 22:24:51 +00:00
ast_bridge_call_thread_launch ( tobj ) ;
return - 1 ; /* XXX meaning the channel is bridged ? */
} else if ( ! ast_check_hangup ( transferee ) ) {
/* act as blind transfer */
if ( ast_autoservice_stop ( transferee ) < 0 ) {
ast_hangup ( newchan ) ;
return - 1 ;
}
2006-04-18 13:05:48 +00:00
2007-05-01 22:24:51 +00:00
if ( ! newchan ) {
unsigned int tries = 0 ;
2007-11-06 20:32:49 +00:00
char * transferer_tech , * transferer_name = ast_strdupa ( transferer - > name ) ;
2005-01-05 19:56:47 +00:00
2007-11-06 20:32:49 +00:00
transferer_tech = strsep ( & transferer_name , " / " ) ;
transferer_name = strsep ( & transferer_name , " - " ) ;
if ( ast_strlen_zero ( transferer_name ) | | ast_strlen_zero ( transferer_tech ) ) {
ast_log ( LOG_WARNING , " Transferer has invalid channel name: '%s' \n " , transferer - > name ) ;
2007-05-01 22:24:51 +00:00
if ( ast_stream_and_wait ( transferee , " beeperr " , " " ) )
return - 1 ;
2008-04-08 17:32:42 +00:00
return AST_FEATURE_RETURN_SUCCESS ;
2007-05-01 22:24:51 +00:00
}
2007-11-06 20:32:49 +00:00
ast_log ( LOG_NOTICE , " We're trying to call %s/%s \n " , transferer_tech , transferer_name ) ;
newchan = ast_feature_request_and_dial ( transferee , NULL , transferer_tech , ast_best_codec ( transferee - > nativeformats ) ,
2008-02-27 17:31:31 +00:00
transferer_name , atxfernoanswertimeout , & outstate , transferee - > cid . cid_num , transferee - > cid . cid_name , 0 , transferer - > language ) ;
2007-05-01 22:24:51 +00:00
while ( ! newchan & & ! atxferdropcall & & tries < atxfercallbackretries ) {
/* Trying to transfer again */
ast_autoservice_start ( transferee ) ;
ast_indicate ( transferee , AST_CONTROL_HOLD ) ;
newchan = ast_feature_request_and_dial ( transferer , transferee , " Local " , ast_best_codec ( transferer - > nativeformats ) ,
2008-02-27 17:31:31 +00:00
xferto , atxfernoanswertimeout , & outstate , transferer - > cid . cid_num , transferer - > cid . cid_name , 1 , transferer - > language ) ;
2007-05-01 22:24:51 +00:00
if ( ast_autoservice_stop ( transferee ) < 0 ) {
2007-09-17 02:20:40 +00:00
if ( newchan )
ast_hangup ( newchan ) ;
2007-05-01 22:24:51 +00:00
return - 1 ;
}
if ( ! newchan ) {
/* Transfer failed, sleeping */
2007-06-14 19:39:12 +00:00
ast_debug ( 1 , " Sleeping for %d ms before callback. \n " , atxferloopdelay ) ;
2007-05-01 22:24:51 +00:00
ast_safe_sleep ( transferee , atxferloopdelay ) ;
2007-06-14 19:39:12 +00:00
ast_debug ( 1 , " Trying to callback... \n " ) ;
2007-11-06 20:32:49 +00:00
newchan = ast_feature_request_and_dial ( transferee , NULL , transferer_tech , ast_best_codec ( transferee - > nativeformats ) ,
2008-02-27 17:31:31 +00:00
transferer_name , atxfernoanswertimeout , & outstate , transferee - > cid . cid_num , transferee - > cid . cid_name , 0 , transferer - > language ) ;
2007-05-01 22:24:51 +00:00
}
tries + + ;
}
}
if ( ! newchan )
return - 1 ;
2006-04-18 13:05:48 +00:00
2007-05-01 22:24:51 +00:00
/* newchan is up, we should prepare transferee and bridge them */
2007-10-02 18:59:39 +00:00
if ( check_compat ( transferee , newchan ) ) {
finishup ( transferee ) ;
2007-05-01 22:24:51 +00:00
return - 1 ;
2007-10-02 18:59:39 +00:00
}
2007-05-01 22:24:51 +00:00
ast_indicate ( transferee , AST_CONTROL_UNHOLD ) ;
2006-04-18 13:05:48 +00:00
2007-05-01 22:24:51 +00:00
if ( ( ast_waitfordigit ( transferee , 100 ) < 0 )
| | ( ast_waitfordigit ( newchan , 100 ) < 0 )
| | ast_check_hangup ( transferee )
| | ast_check_hangup ( newchan ) ) {
ast_hangup ( newchan ) ;
return - 1 ;
}
2006-04-18 13:05:48 +00:00
2007-05-01 22:24:51 +00:00
xferchan = ast_channel_alloc ( 0 , AST_STATE_DOWN , 0 , 0 , " " , " " , " " , 0 , " Transfered/%s " , transferee - > name ) ;
if ( ! xferchan ) {
ast_hangup ( newchan ) ;
return - 1 ;
}
/* Make formats okay */
2008-03-11 19:23:28 +00:00
xferchan - > visible_indication = transferer - > visible_indication ;
2007-05-01 22:24:51 +00:00
xferchan - > readformat = transferee - > readformat ;
xferchan - > writeformat = transferee - > writeformat ;
ast_channel_masquerade ( xferchan , transferee ) ;
ast_explicit_goto ( xferchan , transferee - > context , transferee - > exten , transferee - > priority ) ;
xferchan - > _state = AST_STATE_UP ;
ast_clear_flag ( xferchan , AST_FLAGS_ALL ) ;
xferchan - > _softhangup = 0 ;
if ( ( f = ast_read ( xferchan ) ) )
ast_frfree ( f ) ;
newchan - > _state = AST_STATE_UP ;
ast_clear_flag ( newchan , AST_FLAGS_ALL ) ;
newchan - > _softhangup = 0 ;
if ( ! ( tobj = ast_calloc ( 1 , sizeof ( * tobj ) ) ) ) {
ast_hangup ( xferchan ) ;
ast_hangup ( newchan ) ;
return - 1 ;
}
2008-01-18 16:58:50 +00:00
tobj - > chan = newchan ;
tobj - > peer = xferchan ;
2007-05-01 22:24:51 +00:00
tobj - > bconfig = * config ;
if ( ast_stream_and_wait ( newchan , xfersound , " " ) )
ast_log ( LOG_WARNING , " Failed to play transfer sound! \n " ) ;
ast_bridge_call_thread_launch ( tobj ) ;
return - 1 ; /* XXX meaning the channel is bridged ? */
} else {
/* Transferee hung up */
finishup ( transferee ) ;
2006-04-18 13:05:48 +00:00
return - 1 ;
}
2005-01-05 19:56:47 +00:00
}
/* add atxfer and automon as undefined so you can only use em if you configure them */
2007-05-01 22:24:51 +00:00
# define FEATURES_COUNT ARRAY_LEN(builtin_features)
2006-01-19 22:09:18 +00:00
2007-05-08 16:31:16 +00:00
AST_RWLOCK_DEFINE_STATIC ( features_lock ) ;
static struct ast_call_feature builtin_features [ ] =
2007-05-31 18:21:47 +00:00
{
2006-08-29 21:20:43 +00:00
{ AST_FEATURE_REDIRECT , " Blind Transfer " , " blindxfer " , " # " , " # " , builtin_blindtransfer , AST_FEATURE_FLAG_NEEDSDTMF , " " } ,
{ AST_FEATURE_REDIRECT , " Attended Transfer " , " atxfer " , " " , " " , builtin_atxfer , AST_FEATURE_FLAG_NEEDSDTMF , " " } ,
{ AST_FEATURE_AUTOMON , " One Touch Monitor " , " automon " , " " , " " , builtin_automonitor , AST_FEATURE_FLAG_NEEDSDTMF , " " } ,
{ AST_FEATURE_DISCONNECT , " Disconnect Call " , " disconnect " , " * " , " * " , builtin_disconnect , AST_FEATURE_FLAG_NEEDSDTMF , " " } ,
{ AST_FEATURE_PARKCALL , " Park Call " , " parkcall " , " " , " " , builtin_parkcall , AST_FEATURE_FLAG_NEEDSDTMF , " " } ,
2007-11-30 21:19:57 +00:00
{ AST_FEATURE_AUTOMIXMON , " One Touch MixMonitor " , " automixmon " , " " , " " , builtin_automixmonitor , AST_FEATURE_FLAG_NEEDSDTMF , " " } ,
2005-01-04 04:01:40 +00:00
} ;
2005-08-23 02:22:33 +00:00
2006-05-11 20:07:44 +00:00
static AST_LIST_HEAD_STATIC ( feature_list , ast_call_feature ) ;
2005-08-23 02:22:33 +00:00
2006-01-19 22:09:18 +00:00
/*! \brief register new feature into feature_list*/
2005-08-23 02:22:33 +00:00
void ast_register_feature ( struct ast_call_feature * feature )
{
if ( ! feature ) {
ast_log ( LOG_NOTICE , " You didn't pass a feature! \n " ) ;
2007-06-06 18:43:12 +00:00
return ;
2005-08-23 02:22:33 +00:00
}
AST_LIST_LOCK ( & feature_list ) ;
AST_LIST_INSERT_HEAD ( & feature_list , feature , feature_entry ) ;
AST_LIST_UNLOCK ( & feature_list ) ;
2007-07-26 15:49:18 +00:00
ast_verb ( 2 , " Registered Feature '%s' \n " , feature - > sname ) ;
2005-08-23 02:22:33 +00:00
}
2007-08-07 23:04:01 +00:00
/*!
* \ brief Add new feature group
2007-09-05 16:31:39 +00:00
* \ param fgname feature group name .
*
2007-08-07 23:04:01 +00:00
* Add new feature group to the feature group list insert at head of list .
* \ note This function MUST be called while feature_groups is locked .
*/
2007-05-31 18:21:47 +00:00
static struct feature_group * register_group ( const char * fgname )
{
struct feature_group * fg ;
if ( ! fgname ) {
ast_log ( LOG_NOTICE , " You didn't pass a new group name! \n " ) ;
return NULL ;
}
if ( ! ( fg = ast_calloc ( 1 , sizeof ( * fg ) ) ) )
return NULL ;
if ( ast_string_field_init ( fg , 128 ) ) {
2007-06-06 21:20:11 +00:00
ast_free ( fg ) ;
2007-05-31 18:21:47 +00:00
return NULL ;
}
ast_string_field_set ( fg , gname , fgname ) ;
AST_LIST_INSERT_HEAD ( & feature_groups , fg , entry ) ;
2007-07-26 15:49:18 +00:00
ast_verb ( 2 , " Registered group '%s' \n " , fg - > gname ) ;
2007-05-31 18:21:47 +00:00
return fg ;
}
2007-08-07 23:04:01 +00:00
/*!
* \ brief Add feature to group
* \ param fg feature group
* \ param exten
2007-09-05 16:31:39 +00:00
* \ param feature feature to add .
*
2007-08-07 23:04:01 +00:00
* Check fg and feature specified , add feature to list
* \ note This function MUST be called while feature_groups is locked .
*/
2007-05-31 18:21:47 +00:00
static void register_group_feature ( struct feature_group * fg , const char * exten , struct ast_call_feature * feature )
{
struct feature_group_exten * fge ;
if ( ! fg ) {
ast_log ( LOG_NOTICE , " You didn't pass a group! \n " ) ;
return ;
}
if ( ! feature ) {
ast_log ( LOG_NOTICE , " You didn't pass a feature! \n " ) ;
return ;
}
2008-07-17 18:14:42 +00:00
if ( ! ( fge = ast_calloc ( 1 , sizeof ( * fge ) ) ) )
return ;
if ( ast_string_field_init ( fge , 128 ) ) {
ast_free ( fge ) ;
return ;
}
ast_string_field_set ( fge , exten , S_OR ( exten , feature - > exten ) ) ;
2007-05-31 18:21:47 +00:00
fge - > feature = feature ;
AST_LIST_INSERT_HEAD ( & fg - > features , fge , entry ) ;
2007-07-26 15:49:18 +00:00
ast_verb ( 2 , " Registered feature '%s' for group '%s' at exten '%s' \n " ,
2007-05-31 18:21:47 +00:00
feature - > sname , fg - > gname , exten ) ;
}
2005-08-23 02:22:33 +00:00
void ast_unregister_feature ( struct ast_call_feature * feature )
{
2006-04-16 18:37:01 +00:00
if ( ! feature )
return ;
2005-08-23 02:22:33 +00:00
AST_LIST_LOCK ( & feature_list ) ;
AST_LIST_REMOVE ( & feature_list , feature , feature_entry ) ;
AST_LIST_UNLOCK ( & feature_list ) ;
2007-06-06 21:20:11 +00:00
ast_free ( feature ) ;
2005-08-23 02:22:33 +00:00
}
METERMAIDS:
-----------
- Adding devicestate providers, a new architecture to add non-channel related
device state information, like parking lots, queues, meetmes, vending machines
and Windows 98 reboots (lots of blinking on those lights)
- Adding provider for parking lots, so you can subscribe to the status of a
parking lot
- Adding provider for meetme, so you can have a blinking lamp for a meetme
( Example: exten => edvina,hint,meetme:1234 )
- Adding support for directed parking - set the PARKINGEXTEN before you manually
call Park() and you will be parked on that space. If it's occupied, dialplan
execution will continue.
This work was sponsored by Voop A/S - www.voop.com
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@36055 65c4cc65-6c06-0410-ace0-fbb531ad65f3
2006-06-26 16:43:21 +00:00
/*! \brief Remove all features in the list */
2005-08-23 14:40:03 +00:00
static void ast_unregister_features ( void )
{
struct ast_call_feature * feature ;
AST_LIST_LOCK ( & feature_list ) ;
while ( ( feature = AST_LIST_REMOVE_HEAD ( & feature_list , feature_entry ) ) )
2007-06-06 21:20:11 +00:00
ast_free ( feature ) ;
2005-08-23 14:40:03 +00:00
AST_LIST_UNLOCK ( & feature_list ) ;
}
2005-08-23 02:22:33 +00:00
2007-05-04 17:49:20 +00:00
/*! \brief find a call feature by name */
2007-05-08 16:54:02 +00:00
static struct ast_call_feature * find_dynamic_feature ( const char * name )
2005-08-23 02:22:33 +00:00
{
struct ast_call_feature * tmp ;
2005-09-07 21:36:30 +00:00
AST_LIST_TRAVERSE ( & feature_list , tmp , feature_entry ) {
if ( ! strcasecmp ( tmp - > sname , name ) )
break ;
2005-08-23 02:22:33 +00:00
}
return tmp ;
}
2007-08-07 23:04:01 +00:00
/*! \brief Remove all feature groups in the list */
2007-05-31 18:21:47 +00:00
static void ast_unregister_groups ( void )
{
struct feature_group * fg ;
struct feature_group_exten * fge ;
AST_RWLIST_WRLOCK ( & feature_groups ) ;
while ( ( fg = AST_LIST_REMOVE_HEAD ( & feature_groups , entry ) ) ) {
while ( ( fge = AST_LIST_REMOVE_HEAD ( & fg - > features , entry ) ) ) {
2007-11-04 19:44:31 +00:00
ast_string_field_free_memory ( fge ) ;
2007-06-06 21:20:11 +00:00
ast_free ( fge ) ;
2007-05-31 18:21:47 +00:00
}
2007-11-04 19:44:31 +00:00
ast_string_field_free_memory ( fg ) ;
2007-06-06 21:20:11 +00:00
ast_free ( fg ) ;
2007-05-31 18:21:47 +00:00
}
AST_RWLIST_UNLOCK ( & feature_groups ) ;
}
2007-08-07 23:04:01 +00:00
/*!
* \ brief Find a group by name
* \ param name feature name
* \ retval feature group on success .
* \ retval NULL on failure .
*/
2007-05-31 18:21:47 +00:00
static struct feature_group * find_group ( const char * name ) {
struct feature_group * fg = NULL ;
AST_LIST_TRAVERSE ( & feature_groups , fg , entry ) {
if ( ! strcasecmp ( fg - > gname , name ) )
break ;
}
return fg ;
}
2007-05-08 16:41:35 +00:00
void ast_rdlock_call_features ( void )
{
ast_rwlock_rdlock ( & features_lock ) ;
}
void ast_unlock_call_features ( void )
{
ast_rwlock_unlock ( & features_lock ) ;
}
struct ast_call_feature * ast_find_call_feature ( const char * name )
2007-05-04 18:47:19 +00:00
{
int x ;
for ( x = 0 ; x < FEATURES_COUNT ; x + + ) {
2007-05-08 16:41:35 +00:00
if ( ! strcasecmp ( name , builtin_features [ x ] . sname ) )
2007-05-04 18:47:19 +00:00
return & builtin_features [ x ] ;
}
return NULL ;
}
2007-08-07 23:04:01 +00:00
/*!
* \ brief exec an app by feature
2007-09-05 16:31:39 +00:00
* \ param chan , peer , config , code , sense , data
*
2007-08-07 23:04:01 +00:00
* Find a feature , determine which channel activated
2008-04-08 17:32:42 +00:00
* \ retval AST_FEATURE_RETURN_PBX_KEEPALIVE , AST_FEATURE_RETURN_NO_HANGUP_PEER
2007-08-07 23:04:01 +00:00
* \ retval - 1 error .
* \ retval - 2 when an application cannot be found .
*/
2007-08-23 20:20:17 +00:00
static int feature_exec_app ( struct ast_channel * chan , struct ast_channel * peer , struct ast_bridge_config * config , char * code , int sense , void * data )
2005-08-23 02:22:33 +00:00
{
struct ast_app * app ;
2007-08-23 20:20:17 +00:00
struct ast_call_feature * feature = data ;
2006-08-29 21:20:43 +00:00
struct ast_channel * work , * idle ;
2005-08-23 02:22:33 +00:00
int res ;
if ( ! feature ) { /* shouldn't ever happen! */
ast_log ( LOG_NOTICE , " Found feature before, but at execing we've lost it?? \n " ) ;
return - 1 ;
}
2006-08-07 04:15:52 +00:00
if ( sense = = FEATURE_SENSE_CHAN ) {
if ( ! ast_test_flag ( feature , AST_FEATURE_FLAG_BYCALLER ) )
2008-04-08 17:32:42 +00:00
return AST_FEATURE_RETURN_KEEPTRYING ;
2006-08-29 21:20:43 +00:00
if ( ast_test_flag ( feature , AST_FEATURE_FLAG_ONSELF ) ) {
work = chan ;
idle = peer ;
} else {
work = peer ;
idle = chan ;
}
2005-08-23 02:22:33 +00:00
} else {
2006-08-07 04:15:52 +00:00
if ( ! ast_test_flag ( feature , AST_FEATURE_FLAG_BYCALLEE ) )
2008-04-08 17:32:42 +00:00
return AST_FEATURE_RETURN_KEEPTRYING ;
2006-08-29 21:20:43 +00:00
if ( ast_test_flag ( feature , AST_FEATURE_FLAG_ONSELF ) ) {
work = peer ;
idle = chan ;
} else {
work = chan ;
idle = peer ;
}
2006-08-07 04:15:52 +00:00
}
if ( ! ( app = pbx_findapp ( feature - > app ) ) ) {
2005-08-23 02:22:33 +00:00
ast_log ( LOG_WARNING , " Could not find application (%s) \n " , feature - > app ) ;
2006-01-05 23:08:55 +00:00
return - 2 ;
2005-08-23 02:22:33 +00:00
}
2006-08-07 04:15:52 +00:00
2006-08-29 21:20:43 +00:00
ast_autoservice_start ( idle ) ;
if ( ! ast_strlen_zero ( feature - > moh_class ) )
ast_moh_start ( idle , feature - > moh_class , NULL ) ;
2006-08-07 04:15:52 +00:00
res = pbx_exec ( work , app , feature - > app_args ) ;
2006-08-29 21:20:43 +00:00
if ( ! ast_strlen_zero ( feature - > moh_class ) )
ast_moh_stop ( idle ) ;
ast_autoservice_stop ( idle ) ;
2008-09-04 17:27:56 +00:00
if ( res = = AST_PBX_KEEPALIVE ) {
/* do not hangup peer if feature is to be activated on it */
if ( ( ast_test_flag ( feature , AST_FEATURE_FLAG_ONPEER ) & & sense = = FEATURE_SENSE_CHAN ) | | ( ast_test_flag ( feature , AST_FEATURE_FLAG_ONSELF ) & & sense = = FEATURE_SENSE_PEER ) )
return AST_FEATURE_RETURN_NO_HANGUP_PEER ;
else
return AST_FEATURE_RETURN_PBX_KEEPALIVE ;
}
2006-08-07 04:15:52 +00:00
else if ( res = = AST_PBX_NO_HANGUP_PEER )
2008-04-08 17:32:42 +00:00
return AST_FEATURE_RETURN_NO_HANGUP_PEER ;
2006-08-07 04:15:52 +00:00
else if ( res )
2008-04-08 17:32:42 +00:00
return AST_FEATURE_RETURN_SUCCESSBREAK ;
2005-08-23 02:22:33 +00:00
2008-04-08 17:32:42 +00:00
return AST_FEATURE_RETURN_SUCCESS ; /*! \todo XXX should probably return res */
2005-08-23 02:22:33 +00:00
}
2005-01-04 04:01:40 +00:00
static void unmap_features ( void )
{
int x ;
2007-05-08 16:31:16 +00:00
ast_rwlock_wrlock ( & features_lock ) ;
2005-07-25 17:31:53 +00:00
for ( x = 0 ; x < FEATURES_COUNT ; x + + )
2005-01-04 04:01:40 +00:00
strcpy ( builtin_features [ x ] . exten , builtin_features [ x ] . default_exten ) ;
2007-05-08 16:31:16 +00:00
ast_rwlock_unlock ( & features_lock ) ;
2005-01-04 04:01:40 +00:00
}
static int remap_feature ( const char * name , const char * value )
{
2007-05-08 16:54:02 +00:00
int x , res = - 1 ;
2007-05-08 16:31:16 +00:00
ast_rwlock_wrlock ( & features_lock ) ;
2007-05-08 16:54:02 +00:00
for ( x = 0 ; x < FEATURES_COUNT ; x + + ) {
if ( strcasecmp ( builtin_features [ x ] . sname , name ) )
continue ;
ast_copy_string ( builtin_features [ x ] . exten , value , sizeof ( builtin_features [ x ] . exten ) ) ;
2007-05-08 16:31:16 +00:00
res = 0 ;
2007-05-08 16:54:02 +00:00
break ;
2005-01-04 04:01:40 +00:00
}
2007-05-08 16:31:16 +00:00
ast_rwlock_unlock ( & features_lock ) ;
2005-01-04 04:01:40 +00:00
return res ;
}
2007-08-07 23:04:01 +00:00
/*!
* \ brief Check the dynamic features
* \ param chan , peer , config , code , sense
2007-09-05 16:31:39 +00:00
*
2007-08-07 23:04:01 +00:00
* Lock features list , browse for code , unlock list
* \ retval res on success .
* \ retval - 1 on failure .
*/
2005-01-04 04:01:40 +00:00
static int ast_feature_interpret ( struct ast_channel * chan , struct ast_channel * peer , struct ast_bridge_config * config , char * code , int sense )
{
int x ;
2005-01-10 14:46:59 +00:00
struct ast_flags features ;
2005-08-23 02:22:33 +00:00
struct ast_call_feature * feature ;
2007-05-31 18:21:47 +00:00
struct feature_group * fg = NULL ;
struct feature_group_exten * fge ;
2007-12-12 19:50:32 +00:00
const char * dynamic_features ;
2007-05-08 16:31:16 +00:00
char * tmp , * tok ;
2008-09-04 17:27:56 +00:00
int res = AST_FEATURE_RETURN_PASSDIGITS ;
int feature_detected = 0 ;
2005-01-04 04:01:40 +00:00
2007-12-12 17:51:50 +00:00
if ( sense = = FEATURE_SENSE_CHAN ) {
2007-05-31 18:21:47 +00:00
ast_copy_flags ( & features , & ( config - > features_caller ) , AST_FLAGS_ALL ) ;
2007-12-12 17:51:50 +00:00
dynamic_features = pbx_builtin_getvar_helper ( chan , " DYNAMIC_FEATURES " ) ;
}
else {
2007-05-31 18:21:47 +00:00
ast_copy_flags ( & features , & ( config - > features_callee ) , AST_FLAGS_ALL ) ;
2007-12-12 17:51:50 +00:00
dynamic_features = pbx_builtin_getvar_helper ( peer , " DYNAMIC_FEATURES " ) ;
}
2008-02-07 20:02:17 +00:00
ast_debug ( 3 , " Feature interpret: chan=%s, peer=%s, code=%s, sense=%d, features=%d, dynamic=%s \n " , chan - > name , peer - > name , code , sense , features . flags , dynamic_features ) ;
2005-09-07 21:36:30 +00:00
2007-05-08 16:31:16 +00:00
ast_rwlock_rdlock ( & features_lock ) ;
for ( x = 0 ; x < FEATURES_COUNT ; x + + ) {
2005-01-10 14:46:59 +00:00
if ( ( ast_test_flag ( & features , builtin_features [ x ] . feature_mask ) ) & &
2005-01-04 04:01:40 +00:00
! ast_strlen_zero ( builtin_features [ x ] . exten ) ) {
/* Feature is up for consideration */
if ( ! strcmp ( builtin_features [ x ] . exten , code ) ) {
2007-08-23 20:20:17 +00:00
res = builtin_features [ x ] . operation ( chan , peer , config , code , sense , NULL ) ;
2008-09-04 17:27:56 +00:00
feature_detected = 1 ;
2005-01-04 04:01:40 +00:00
break ;
} else if ( ! strncmp ( builtin_features [ x ] . exten , code , strlen ( code ) ) ) {
2008-04-08 17:32:42 +00:00
if ( res = = AST_FEATURE_RETURN_PASSDIGITS )
res = AST_FEATURE_RETURN_STOREDIGITS ;
2005-08-23 02:22:33 +00:00
}
}
}
2007-05-08 16:31:16 +00:00
ast_rwlock_unlock ( & features_lock ) ;
2005-08-23 02:22:33 +00:00
2008-09-04 17:27:56 +00:00
if ( ast_strlen_zero ( dynamic_features ) | | feature_detected )
2007-05-08 16:31:16 +00:00
return res ;
2005-08-23 02:22:33 +00:00
2007-05-08 16:31:16 +00:00
tmp = ast_strdupa ( dynamic_features ) ;
2005-09-07 21:36:30 +00:00
2007-05-08 16:31:16 +00:00
while ( ( tok = strsep ( & tmp , " # " ) ) ) {
2007-05-31 18:21:47 +00:00
AST_RWLIST_RDLOCK ( & feature_groups ) ;
fg = find_group ( tok ) ;
2007-09-17 16:58:23 +00:00
if ( fg ) {
AST_LIST_TRAVERSE ( & fg - > features , fge , entry ) {
if ( strcasecmp ( fge - > exten , code ) )
continue ;
res = fge - > feature - > operation ( chan , peer , config , code , sense , fge - > feature ) ;
2008-04-08 17:32:42 +00:00
if ( res ! = AST_FEATURE_RETURN_KEEPTRYING ) {
2007-09-17 16:58:23 +00:00
AST_RWLIST_UNLOCK ( & feature_groups ) ;
break ;
}
2008-04-08 17:32:42 +00:00
res = AST_FEATURE_RETURN_PASSDIGITS ;
2007-09-17 16:58:23 +00:00
}
if ( fge )
break ;
2007-05-31 18:21:47 +00:00
}
AST_RWLIST_UNLOCK ( & feature_groups ) ;
AST_LIST_LOCK ( & feature_list ) ;
if ( ! ( feature = find_dynamic_feature ( tok ) ) ) {
AST_LIST_UNLOCK ( & feature_list ) ;
continue ;
}
2007-05-08 16:31:16 +00:00
/* Feature is up for consideration */
if ( ! strcmp ( feature - > exten , code ) ) {
2007-07-26 15:49:18 +00:00
ast_verb ( 3 , " Feature Found: %s exten: %s \n " , feature - > sname , tok ) ;
2007-08-23 20:20:17 +00:00
res = feature - > operation ( chan , peer , config , code , sense , feature ) ;
2008-04-08 17:32:42 +00:00
if ( res ! = AST_FEATURE_RETURN_KEEPTRYING ) {
2007-09-17 16:58:23 +00:00
AST_LIST_UNLOCK ( & feature_list ) ;
break ;
}
2008-04-08 17:32:42 +00:00
res = AST_FEATURE_RETURN_PASSDIGITS ;
2007-05-08 16:31:16 +00:00
} else if ( ! strncmp ( feature - > exten , code , strlen ( code ) ) )
2008-04-08 17:32:42 +00:00
res = AST_FEATURE_RETURN_STOREDIGITS ;
2007-05-08 16:31:16 +00:00
2007-05-08 16:54:02 +00:00
AST_LIST_UNLOCK ( & feature_list ) ;
2005-01-04 04:01:40 +00:00
}
2005-08-23 02:22:33 +00:00
2005-01-04 04:01:40 +00:00
return res ;
}
2005-09-07 21:36:30 +00:00
static void set_config_flags ( struct ast_channel * chan , struct ast_channel * peer , struct ast_bridge_config * config )
2005-01-04 04:01:40 +00:00
{
int x ;
2005-09-07 21:36:30 +00:00
2007-05-08 16:31:16 +00:00
ast_clear_flag ( config , AST_FLAGS_ALL ) ;
ast_rwlock_rdlock ( & features_lock ) ;
2005-08-23 15:33:27 +00:00
for ( x = 0 ; x < FEATURES_COUNT ; x + + ) {
2007-05-08 16:31:16 +00:00
if ( ! ast_test_flag ( builtin_features + x , AST_FEATURE_FLAG_NEEDSDTMF ) )
continue ;
2005-09-07 21:36:30 +00:00
2007-05-08 16:31:16 +00:00
if ( ast_test_flag ( & ( config - > features_caller ) , builtin_features [ x ] . feature_mask ) )
ast_set_flag ( config , AST_BRIDGE_DTMF_CHANNEL_0 ) ;
if ( ast_test_flag ( & ( config - > features_callee ) , builtin_features [ x ] . feature_mask ) )
ast_set_flag ( config , AST_BRIDGE_DTMF_CHANNEL_1 ) ;
2005-01-04 04:01:40 +00:00
}
2007-05-08 16:31:16 +00:00
ast_rwlock_unlock ( & features_lock ) ;
2005-09-07 21:36:30 +00:00
if ( chan & & peer & & ! ( ast_test_flag ( config , AST_BRIDGE_DTMF_CHANNEL_0 ) & & ast_test_flag ( config , AST_BRIDGE_DTMF_CHANNEL_1 ) ) ) {
2005-12-03 19:25:33 +00:00
const char * dynamic_features = pbx_builtin_getvar_helper ( chan , " DYNAMIC_FEATURES " ) ;
2005-09-07 21:36:30 +00:00
if ( dynamic_features ) {
char * tmp = ast_strdupa ( dynamic_features ) ;
char * tok ;
struct ast_call_feature * feature ;
/* while we have a feature */
2006-05-10 13:22:15 +00:00
while ( ( tok = strsep ( & tmp , " # " ) ) ) {
2007-05-08 16:54:02 +00:00
AST_LIST_LOCK ( & feature_list ) ;
if ( ( feature = find_dynamic_feature ( tok ) ) & & ast_test_flag ( feature , AST_FEATURE_FLAG_NEEDSDTMF ) ) {
2006-08-07 04:15:52 +00:00
if ( ast_test_flag ( feature , AST_FEATURE_FLAG_BYCALLER ) )
2006-04-16 18:37:01 +00:00
ast_set_flag ( config , AST_BRIDGE_DTMF_CHANNEL_0 ) ;
2006-08-07 04:15:52 +00:00
if ( ast_test_flag ( feature , AST_FEATURE_FLAG_BYCALLEE ) )
2006-04-16 18:37:01 +00:00
ast_set_flag ( config , AST_BRIDGE_DTMF_CHANNEL_1 ) ;
2005-09-07 21:36:30 +00:00
}
2007-05-08 16:54:02 +00:00
AST_LIST_UNLOCK ( & feature_list ) ;
2005-09-07 21:36:30 +00:00
}
}
}
2005-01-04 04:01:40 +00:00
}
2007-08-07 23:04:01 +00:00
/*!
2007-09-05 16:31:39 +00:00
* \ brief Get feature and dial
2007-08-07 23:04:01 +00:00
* \ param caller , transferee , type , format , data , timeout , outstate , cid_num , cid_name , igncallerstate
2007-09-05 16:31:39 +00:00
*
2007-08-07 23:04:01 +00:00
* Request channel , set channel variables , initiate call , check if they want to disconnect
* go into loop , check if timeout has elapsed , check if person to be transfered hung up ,
* check for answer break loop , set cdr return channel .
2007-09-05 16:31:39 +00:00
*
2007-08-07 23:04:01 +00:00
* \ todo XXX Check - this is very similar to the code in channel . c
* \ return always a channel
*/
2008-02-27 17:31:31 +00:00
static struct ast_channel * ast_feature_request_and_dial ( struct ast_channel * caller , struct ast_channel * transferee , const char * type , int format , void * data , int timeout , int * outstate , const char * cid_num , const char * cid_name , int igncallerstate , const char * language )
2005-06-23 22:12:01 +00:00
{
int state = 0 ;
int cause = 0 ;
int to ;
struct ast_channel * chan ;
struct ast_channel * monitor_chans [ 2 ] ;
struct ast_channel * active_channel ;
int res = 0 , ready = 0 ;
2008-02-27 17:31:31 +00:00
2005-06-23 22:12:01 +00:00
if ( ( chan = ast_request ( type , format , data , & cause ) ) ) {
ast_set_callerid ( chan , cid_num , cid_name , cid_num ) ;
2008-02-27 17:31:31 +00:00
ast_string_field_set ( chan , language , language ) ;
2005-11-01 20:29:36 +00:00
ast_channel_inherit_variables ( caller , chan ) ;
2006-05-26 17:59:29 +00:00
pbx_builtin_setvar_helper ( chan , " TRANSFERERNAME " , caller - > name ) ;
2007-03-30 14:37:21 +00:00
2005-06-23 22:12:01 +00:00
if ( ! ast_call ( chan , data , timeout ) ) {
2005-07-15 23:00:47 +00:00
struct timeval started ;
2005-06-23 22:12:01 +00:00
int x , len = 0 ;
char * disconnect_code = NULL , * dialed_code = NULL ;
ast_indicate ( caller , AST_CONTROL_RINGING ) ;
/* support dialing of the featuremap disconnect code while performing an attended tranfer */
2007-05-08 16:31:16 +00:00
ast_rwlock_rdlock ( & features_lock ) ;
for ( x = 0 ; x < FEATURES_COUNT ; x + + ) {
2005-06-23 22:12:01 +00:00
if ( strcasecmp ( builtin_features [ x ] . sname , " disconnect " ) )
continue ;
disconnect_code = builtin_features [ x ] . exten ;
len = strlen ( disconnect_code ) + 1 ;
dialed_code = alloca ( len ) ;
memset ( dialed_code , 0 , len ) ;
break ;
}
2007-05-08 16:31:16 +00:00
ast_rwlock_unlock ( & features_lock ) ;
2005-06-23 22:12:01 +00:00
x = 0 ;
2005-07-15 23:00:47 +00:00
started = ast_tvnow ( ) ;
2005-06-23 22:12:01 +00:00
to = timeout ;
2007-08-28 14:37:09 +00:00
ast_poll_channel_add ( caller , chan ) ;
2007-08-01 15:39:54 +00:00
while ( ! ( ( transferee & & ast_check_hangup ( transferee ) ) & & ( ! igncallerstate & & ast_check_hangup ( caller ) ) ) & & timeout & & ( chan - > _state ! = AST_STATE_UP ) ) {
2006-04-16 20:09:01 +00:00
struct ast_frame * f = NULL ;
2005-06-23 22:12:01 +00:00
monitor_chans [ 0 ] = caller ;
monitor_chans [ 1 ] = chan ;
active_channel = ast_waitfor_n ( monitor_chans , 2 , & to ) ;
/* see if the timeout has been violated */
2005-07-15 23:00:47 +00:00
if ( ast_tvdiff_ms ( ast_tvnow ( ) , started ) > timeout ) {
2005-06-23 22:12:01 +00:00
state = AST_CONTROL_UNHOLD ;
ast_log ( LOG_NOTICE , " We exceeded our AT-timeout \n " ) ;
break ; /*doh! timeout*/
}
2006-04-16 20:09:01 +00:00
if ( ! active_channel )
2005-06-23 22:12:01 +00:00
continue ;
if ( chan & & ( chan = = active_channel ) ) {
f = ast_read ( chan ) ;
if ( f = = NULL ) { /*doh! where'd he go?*/
state = AST_CONTROL_HANGUP ;
res = 0 ;
break ;
}
if ( f - > frametype = = AST_FRAME_CONTROL | | f - > frametype = = AST_FRAME_DTMF | | f - > frametype = = AST_FRAME_TEXT ) {
if ( f - > subclass = = AST_CONTROL_RINGING ) {
state = f - > subclass ;
2007-07-26 15:49:18 +00:00
ast_verb ( 3 , " %s is ringing \n " , chan - > name ) ;
2005-06-23 22:12:01 +00:00
ast_indicate ( caller , AST_CONTROL_RINGING ) ;
} else if ( ( f - > subclass = = AST_CONTROL_BUSY ) | | ( f - > subclass = = AST_CONTROL_CONGESTION ) ) {
state = f - > subclass ;
2007-07-26 15:49:18 +00:00
ast_verb ( 3 , " %s is busy \n " , chan - > name ) ;
2006-03-23 22:00:11 +00:00
ast_indicate ( caller , AST_CONTROL_BUSY ) ;
2005-06-23 22:12:01 +00:00
ast_frfree ( f ) ;
f = NULL ;
break ;
} else if ( f - > subclass = = AST_CONTROL_ANSWER ) {
/* This is what we are hoping for */
state = f - > subclass ;
ast_frfree ( f ) ;
f = NULL ;
ready = 1 ;
break ;
2007-08-31 14:40:21 +00:00
} else if ( f - > subclass ! = - 1 ) {
2005-06-23 22:12:01 +00:00
ast_log ( LOG_NOTICE , " Don't know what to do about control frame: %d \n " , f - > subclass ) ;
}
/* else who cares */
}
} else if ( caller & & ( active_channel = = caller ) ) {
f = ast_read ( caller ) ;
if ( f = = NULL ) { /*doh! where'd he go?*/
2007-05-01 22:24:51 +00:00
if ( ! igncallerstate ) {
2007-08-01 15:39:54 +00:00
if ( ast_check_hangup ( caller ) & & ! ast_check_hangup ( chan ) ) {
2007-05-01 22:24:51 +00:00
/* make this a blind transfer */
ready = 1 ;
break ;
}
state = AST_CONTROL_HANGUP ;
res = 0 ;
2005-06-23 22:12:01 +00:00
break ;
}
2007-05-01 22:24:51 +00:00
} else {
2005-06-23 22:12:01 +00:00
2007-05-01 22:24:51 +00:00
if ( f - > frametype = = AST_FRAME_DTMF ) {
dialed_code [ x + + ] = f - > subclass ;
2005-06-23 22:12:01 +00:00
dialed_code [ x ] = ' \0 ' ;
2007-05-01 22:24:51 +00:00
if ( strlen ( dialed_code ) = = len ) {
x = 0 ;
} else if ( x & & strncmp ( dialed_code , disconnect_code , x ) ) {
x = 0 ;
dialed_code [ x ] = ' \0 ' ;
}
if ( * dialed_code & & ! strcmp ( dialed_code , disconnect_code ) ) {
/* Caller Canceled the call */
state = AST_CONTROL_UNHOLD ;
ast_frfree ( f ) ;
f = NULL ;
break ;
}
2005-06-23 22:12:01 +00:00
}
}
}
2006-04-16 20:09:01 +00:00
if ( f )
2005-06-23 22:12:01 +00:00
ast_frfree ( f ) ;
2006-04-16 20:09:01 +00:00
} /* end while */
2007-08-28 14:37:09 +00:00
ast_poll_channel_del ( caller , chan ) ;
2005-06-23 22:12:01 +00:00
} else
ast_log ( LOG_NOTICE , " Unable to call channel %s/%s \n " , type , ( char * ) data ) ;
} else {
ast_log ( LOG_NOTICE , " Unable to request channel %s/%s \n " , type , ( char * ) data ) ;
switch ( cause ) {
case AST_CAUSE_BUSY :
state = AST_CONTROL_BUSY ;
break ;
case AST_CAUSE_CONGESTION :
state = AST_CONTROL_CONGESTION ;
break ;
}
}
ast_indicate ( caller , - 1 ) ;
if ( chan & & ready ) {
if ( chan - > _state = = AST_STATE_UP )
state = AST_CONTROL_ANSWER ;
res = 0 ;
} else if ( chan ) {
res = - 1 ;
ast_hangup ( chan ) ;
chan = NULL ;
} else {
res = - 1 ;
}
if ( outstate )
* outstate = state ;
return chan ;
}
Merged revisions 142575 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r142575 | murf | 2008-09-11 16:55:49 -0600 (Thu, 11 Sep 2008) | 20 lines
(closes issue #13364)
Reported by: mdu113
Well, fundamentally, the problems revealed in 13364 are
because of the ForkCDR call that is done before the dial.
When the bridge is in place, it's dealing with the first
(and wrong) cdr in the list.
So, I wrote a little func to zip down to the first non-locked
cdr in the chain, and thru-out the ast_bridge_call, these
results are used instead of raw chan->cdr and peer->cdr pointers.
This shouldn't affect anyone who isn't forking cdrs before a
dial, and should correct the cdr's of those that do.
So, this change ends up correcting the dstchannel
and userfield; the disposition was fixed by a previous
patch, it was OK coming into this problem.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@142576 65c4cc65-6c06-0410-ace0-fbb531ad65f3
2008-09-11 23:12:53 +00:00
/*!
* \ brief return the first unlocked cdr in a possible chain
*/
static struct ast_cdr * pick_unlocked_cdr ( struct ast_cdr * cdr )
{
struct ast_cdr * cdr_orig = cdr ;
while ( cdr ) {
if ( ! ast_test_flag ( cdr , AST_CDR_FLAG_LOCKED ) )
return cdr ;
cdr = cdr - > next ;
}
return cdr_orig ; /* everybody LOCKED or some other weirdness, like a NULL */
}
2007-08-07 23:04:01 +00:00
/*!
* \ brief bridge the call and set CDR
* \ param chan , peer , config
2007-09-05 16:31:39 +00:00
*
2007-08-07 23:04:01 +00:00
* Set start time , check for two channels , check if monitor on
* check for feature activation , create new CDR
* \ retval res on success .
* \ retval - 1 on failure to bridge .
*/
2004-04-26 23:22:34 +00:00
int ast_bridge_call ( struct ast_channel * chan , struct ast_channel * peer , struct ast_bridge_config * config )
2001-12-27 11:07:33 +00:00
{
/* Copy voice back and forth between the two channels. Give the peer
the ability to transfer calls with ' # < extension ' syntax . */
struct ast_frame * f ;
struct ast_channel * who ;
2005-01-04 04:01:40 +00:00
char chan_featurecode [ FEATURE_MAX_LEN + 1 ] = " " ;
char peer_featurecode [ FEATURE_MAX_LEN + 1 ] = " " ;
2008-07-03 17:16:44 +00:00
char orig_channame [ AST_MAX_EXTENSION ] ;
char orig_peername [ AST_MAX_EXTENSION ] ;
2001-12-27 11:07:33 +00:00
int res ;
2004-08-06 13:54:07 +00:00
int diff ;
2005-01-04 04:01:40 +00:00
int hasfeatures = 0 ;
int hadfeatures = 0 ;
2001-12-27 11:07:33 +00:00
struct ast_option_header * aoh ;
2005-01-04 04:01:40 +00:00
struct ast_bridge_config backup_config ;
2008-07-03 17:16:44 +00:00
struct ast_cdr * bridge_cdr = NULL ;
Merged revisions 134883 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r134883 | murf | 2008-07-31 13:23:42 -0600 (Thu, 31 Jul 2008) | 51 lines
(closes issue #11849)
Reported by: greyvoip
Tested by: murf
OK, a few days of debugging, a bunch of instrumentation
in chan_sip, main/channel.c, main/pbx.c, etc. and 5 solid
notebook pages of notes later, I have made the small
tweek necc. to get the start time right on the second
CDR when:
A Calls B
B answ.
A hits Xfer button on sip phone,
A dials C and hits the OK button,
A hangs up
C answers ringing phone
B and C converse
B and/or C hangs up
But does not harm the scenario where:
A Calls B
B answ.
B hits xfer button on sip phone,
B dials C and hits the OK button,
B hangs up
C answers ringing phone
A and C converse
A and/or C hangs up
The difference in start times on the second CDR is because
of a Masquerade on the B channel when the xfer number is
sent. It ends up replacing the CDR on the B channel with
a duplicate, which ends up getting tossed out. We keep
a pointer to the first CDR, and update *that* after the
bridge closes. But, only if the CDR has changed.
I hope this change is specific enough not to muck
up any current CDR-based apps. In my defence, I
assert that the previous information was wrong,
and this change fixes it, and possibly other
similar scenarios.
I wonder if I should be doing the same thing
for the channel, as I did for the peer, but
I can't think of a scenario this might affect.
I leave it, then, as an exersize for the users,
to find the scenario where the chan's CDR
changes and loses the proper start time.
........
and as to 1.4 to trunk; have I expressed my
feelings about code shifting from one file
to another? Good.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@134922 65c4cc65-6c06-0410-ace0-fbb531ad65f3
2008-07-31 19:48:08 +00:00
struct ast_cdr * orig_peer_cdr = NULL ;
Merged revisions 142575 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r142575 | murf | 2008-09-11 16:55:49 -0600 (Thu, 11 Sep 2008) | 20 lines
(closes issue #13364)
Reported by: mdu113
Well, fundamentally, the problems revealed in 13364 are
because of the ForkCDR call that is done before the dial.
When the bridge is in place, it's dealing with the first
(and wrong) cdr in the list.
So, I wrote a little func to zip down to the first non-locked
cdr in the chain, and thru-out the ast_bridge_call, these
results are used instead of raw chan->cdr and peer->cdr pointers.
This shouldn't affect anyone who isn't forking cdrs before a
dial, and should correct the cdr's of those that do.
So, this change ends up correcting the dstchannel
and userfield; the disposition was fixed by a previous
patch, it was OK coming into this problem.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@142576 65c4cc65-6c06-0410-ace0-fbb531ad65f3
2008-09-11 23:12:53 +00:00
struct ast_cdr * chan_cdr = pick_unlocked_cdr ( chan - > cdr ) ; /* the proper chan cdr, if there are forked cdrs */
struct ast_cdr * peer_cdr = pick_unlocked_cdr ( peer - > cdr ) ; /* the proper chan cdr, if there are forked cdrs */
2008-09-23 16:52:32 +00:00
struct ast_cdr * new_chan_cdr = NULL ; /* the proper chan cdr, if there are forked cdrs */
struct ast_cdr * new_peer_cdr = NULL ; /* the proper chan cdr, if there are forked cdrs */
2004-09-17 03:49:57 +00:00
2005-01-04 04:01:40 +00:00
memset ( & backup_config , 0 , sizeof ( backup_config ) ) ;
2005-08-03 04:42:59 +00:00
config - > start_time = ast_tvnow ( ) ;
2004-10-27 22:01:33 +00:00
if ( chan & & peer ) {
2004-10-28 15:53:36 +00:00
pbx_builtin_setvar_helper ( chan , " BRIDGEPEER " , peer - > name ) ;
pbx_builtin_setvar_helper ( peer , " BRIDGEPEER " , chan - > name ) ;
} else if ( chan )
2004-10-27 22:01:33 +00:00
pbx_builtin_setvar_helper ( chan , " BLINDTRANSFER " , NULL ) ;
2004-09-17 14:15:11 +00:00
if ( monitor_ok ) {
2005-12-03 19:25:33 +00:00
const char * monitor_exec ;
struct ast_channel * src = NULL ;
2004-09-17 14:15:11 +00:00
if ( ! monitor_app ) {
if ( ! ( monitor_app = pbx_findapp ( " Monitor " ) ) )
2004-09-17 03:49:57 +00:00
monitor_ok = 0 ;
2004-09-17 14:15:11 +00:00
}
if ( ( monitor_exec = pbx_builtin_getvar_helper ( chan , " AUTO_MONITOR " ) ) )
2005-12-03 19:25:33 +00:00
src = chan ;
2004-09-17 14:15:11 +00:00
else if ( ( monitor_exec = pbx_builtin_getvar_helper ( peer , " AUTO_MONITOR " ) ) )
2005-12-03 19:25:33 +00:00
src = peer ;
2006-01-17 18:20:33 +00:00
if ( monitor_app & & src ) {
2005-12-03 19:25:33 +00:00
char * tmp = ast_strdupa ( monitor_exec ) ;
2006-05-10 13:22:15 +00:00
pbx_exec ( src , monitor_app , tmp ) ;
2005-12-03 19:25:33 +00:00
}
2004-09-17 03:49:57 +00:00
}
2005-09-07 21:36:30 +00:00
set_config_flags ( chan , peer , config ) ;
2004-08-06 14:43:25 +00:00
config - > firstpass = 1 ;
2003-07-02 14:06:12 +00:00
2001-12-27 11:07:33 +00:00
/* Answer if need be */
2003-02-02 19:37:23 +00:00
if ( ast_answer ( chan ) )
return - 1 ;
2007-03-30 14:37:21 +00:00
2008-07-03 17:16:44 +00:00
ast_copy_string ( orig_channame , chan - > name , sizeof ( orig_channame ) ) ;
ast_copy_string ( orig_peername , peer - > name , sizeof ( orig_peername ) ) ;
Merged revisions 142575 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r142575 | murf | 2008-09-11 16:55:49 -0600 (Thu, 11 Sep 2008) | 20 lines
(closes issue #13364)
Reported by: mdu113
Well, fundamentally, the problems revealed in 13364 are
because of the ForkCDR call that is done before the dial.
When the bridge is in place, it's dealing with the first
(and wrong) cdr in the list.
So, I wrote a little func to zip down to the first non-locked
cdr in the chain, and thru-out the ast_bridge_call, these
results are used instead of raw chan->cdr and peer->cdr pointers.
This shouldn't affect anyone who isn't forking cdrs before a
dial, and should correct the cdr's of those that do.
So, this change ends up correcting the dstchannel
and userfield; the disposition was fixed by a previous
patch, it was OK coming into this problem.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@142576 65c4cc65-6c06-0410-ace0-fbb531ad65f3
2008-09-11 23:12:53 +00:00
orig_peer_cdr = peer_cdr ;
2008-07-03 17:16:44 +00:00
Merged revisions 142575 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r142575 | murf | 2008-09-11 16:55:49 -0600 (Thu, 11 Sep 2008) | 20 lines
(closes issue #13364)
Reported by: mdu113
Well, fundamentally, the problems revealed in 13364 are
because of the ForkCDR call that is done before the dial.
When the bridge is in place, it's dealing with the first
(and wrong) cdr in the list.
So, I wrote a little func to zip down to the first non-locked
cdr in the chain, and thru-out the ast_bridge_call, these
results are used instead of raw chan->cdr and peer->cdr pointers.
This shouldn't affect anyone who isn't forking cdrs before a
dial, and should correct the cdr's of those that do.
So, this change ends up correcting the dstchannel
and userfield; the disposition was fixed by a previous
patch, it was OK coming into this problem.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@142576 65c4cc65-6c06-0410-ace0-fbb531ad65f3
2008-09-11 23:12:53 +00:00
if ( ! chan_cdr | | ( chan_cdr & & ! ast_test_flag ( chan_cdr , AST_CDR_FLAG_POST_DISABLED ) ) ) {
2008-07-03 17:16:44 +00:00
Merged revisions 142575 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r142575 | murf | 2008-09-11 16:55:49 -0600 (Thu, 11 Sep 2008) | 20 lines
(closes issue #13364)
Reported by: mdu113
Well, fundamentally, the problems revealed in 13364 are
because of the ForkCDR call that is done before the dial.
When the bridge is in place, it's dealing with the first
(and wrong) cdr in the list.
So, I wrote a little func to zip down to the first non-locked
cdr in the chain, and thru-out the ast_bridge_call, these
results are used instead of raw chan->cdr and peer->cdr pointers.
This shouldn't affect anyone who isn't forking cdrs before a
dial, and should correct the cdr's of those that do.
So, this change ends up correcting the dstchannel
and userfield; the disposition was fixed by a previous
patch, it was OK coming into this problem.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@142576 65c4cc65-6c06-0410-ace0-fbb531ad65f3
2008-09-11 23:12:53 +00:00
if ( chan_cdr ) {
ast_set_flag ( chan_cdr , AST_CDR_FLAG_MAIN ) ;
2008-07-03 17:16:44 +00:00
ast_cdr_update ( chan ) ;
Merged revisions 142575 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r142575 | murf | 2008-09-11 16:55:49 -0600 (Thu, 11 Sep 2008) | 20 lines
(closes issue #13364)
Reported by: mdu113
Well, fundamentally, the problems revealed in 13364 are
because of the ForkCDR call that is done before the dial.
When the bridge is in place, it's dealing with the first
(and wrong) cdr in the list.
So, I wrote a little func to zip down to the first non-locked
cdr in the chain, and thru-out the ast_bridge_call, these
results are used instead of raw chan->cdr and peer->cdr pointers.
This shouldn't affect anyone who isn't forking cdrs before a
dial, and should correct the cdr's of those that do.
So, this change ends up correcting the dstchannel
and userfield; the disposition was fixed by a previous
patch, it was OK coming into this problem.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@142576 65c4cc65-6c06-0410-ace0-fbb531ad65f3
2008-09-11 23:12:53 +00:00
bridge_cdr = ast_cdr_dup ( chan_cdr ) ;
2008-07-03 17:16:44 +00:00
ast_copy_string ( bridge_cdr - > lastapp , chan - > appl , sizeof ( bridge_cdr - > lastapp ) ) ;
ast_copy_string ( bridge_cdr - > lastdata , chan - > data , sizeof ( bridge_cdr - > lastdata ) ) ;
} else {
/* better yet, in a xfer situation, find out why the chan cdr got zapped (pun unintentional) */
bridge_cdr = ast_cdr_alloc ( ) ; /* this should be really, really rare/impossible? */
ast_copy_string ( bridge_cdr - > channel , chan - > name , sizeof ( bridge_cdr - > channel ) ) ;
ast_copy_string ( bridge_cdr - > dstchannel , peer - > name , sizeof ( bridge_cdr - > dstchannel ) ) ;
ast_copy_string ( bridge_cdr - > uniqueid , chan - > uniqueid , sizeof ( bridge_cdr - > uniqueid ) ) ;
ast_copy_string ( bridge_cdr - > lastapp , chan - > appl , sizeof ( bridge_cdr - > lastapp ) ) ;
ast_copy_string ( bridge_cdr - > lastdata , chan - > data , sizeof ( bridge_cdr - > lastdata ) ) ;
ast_cdr_setcid ( bridge_cdr , chan ) ;
bridge_cdr - > disposition = ( chan - > _state = = AST_STATE_UP ) ? AST_CDR_ANSWERED : AST_CDR_NULL ;
bridge_cdr - > amaflags = chan - > amaflags ? chan - > amaflags : ast_default_amaflags ;
ast_copy_string ( bridge_cdr - > accountcode , chan - > accountcode , sizeof ( bridge_cdr - > accountcode ) ) ;
/* Destination information */
ast_copy_string ( bridge_cdr - > dst , chan - > exten , sizeof ( bridge_cdr - > dst ) ) ;
ast_copy_string ( bridge_cdr - > dcontext , chan - > context , sizeof ( bridge_cdr - > dcontext ) ) ;
Merged revisions 142575 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r142575 | murf | 2008-09-11 16:55:49 -0600 (Thu, 11 Sep 2008) | 20 lines
(closes issue #13364)
Reported by: mdu113
Well, fundamentally, the problems revealed in 13364 are
because of the ForkCDR call that is done before the dial.
When the bridge is in place, it's dealing with the first
(and wrong) cdr in the list.
So, I wrote a little func to zip down to the first non-locked
cdr in the chain, and thru-out the ast_bridge_call, these
results are used instead of raw chan->cdr and peer->cdr pointers.
This shouldn't affect anyone who isn't forking cdrs before a
dial, and should correct the cdr's of those that do.
So, this change ends up correcting the dstchannel
and userfield; the disposition was fixed by a previous
patch, it was OK coming into this problem.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@142576 65c4cc65-6c06-0410-ace0-fbb531ad65f3
2008-09-11 23:12:53 +00:00
if ( peer_cdr ) {
bridge_cdr - > start = peer_cdr - > start ;
ast_copy_string ( bridge_cdr - > userfield , peer_cdr - > userfield , sizeof ( bridge_cdr - > userfield ) ) ;
2008-07-03 17:16:44 +00:00
} else {
ast_cdr_start ( bridge_cdr ) ;
}
}
2008-08-07 20:25:43 +00:00
ast_debug ( 4 , " bridge answer set, chan answer set \n " ) ;
Merged revisions 142575 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r142575 | murf | 2008-09-11 16:55:49 -0600 (Thu, 11 Sep 2008) | 20 lines
(closes issue #13364)
Reported by: mdu113
Well, fundamentally, the problems revealed in 13364 are
because of the ForkCDR call that is done before the dial.
When the bridge is in place, it's dealing with the first
(and wrong) cdr in the list.
So, I wrote a little func to zip down to the first non-locked
cdr in the chain, and thru-out the ast_bridge_call, these
results are used instead of raw chan->cdr and peer->cdr pointers.
This shouldn't affect anyone who isn't forking cdrs before a
dial, and should correct the cdr's of those that do.
So, this change ends up correcting the dstchannel
and userfield; the disposition was fixed by a previous
patch, it was OK coming into this problem.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@142576 65c4cc65-6c06-0410-ace0-fbb531ad65f3
2008-09-11 23:12:53 +00:00
/* peer_cdr->answer will be set when a macro runs on the peer;
Merged revisions 135799 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r135799 | murf | 2008-08-05 17:13:20 -0600 (Tue, 05 Aug 2008) | 34 lines
(closes issue #12982)
Reported by: bcnit
Tested by: murf
I discovered that also, in the previous bug fixes and changes,
the cdr.conf 'unanswered' option is not being obeyed, so
I fixed this.
And, yes, there are two 'answer' times involved in this
scenario, and I would agree with you, that the first
answer time is the time that should appear in the CDR.
(the second 'answer' time is the time that the bridge
was begun).
I made the necessary adjustments, recording the first
answer time into the peer cdr, and then using that to
override the bridge cdr's value.
To get the 'unanswered' CDRs to appear, I purposely
output them, using the dial cmd to mark them as
DIALED (with a new flag), and outputting them if
they bear that flag, and you are in the right mode.
I also corrected one small mention of the Zap device
to equally consider the dahdi device.
I heavily tested 10-sec-wait macros in dial, and
without the macro call; I tested hangups while the
macro was running vs. letting the macro complete
and the bridge form. Looks OK. Removed all the
instrumentation and debug.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@135821 65c4cc65-6c06-0410-ace0-fbb531ad65f3
2008-08-05 23:45:32 +00:00
in that case , the bridge answer will be delayed while the
macro plays on the peer channel . The peer answered the call
before the macro started playing . To the phone system ,
this is billable time for the call , even tho the caller
hears nothing but ringing while the macro does its thing . */
Merged revisions 142575 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r142575 | murf | 2008-09-11 16:55:49 -0600 (Thu, 11 Sep 2008) | 20 lines
(closes issue #13364)
Reported by: mdu113
Well, fundamentally, the problems revealed in 13364 are
because of the ForkCDR call that is done before the dial.
When the bridge is in place, it's dealing with the first
(and wrong) cdr in the list.
So, I wrote a little func to zip down to the first non-locked
cdr in the chain, and thru-out the ast_bridge_call, these
results are used instead of raw chan->cdr and peer->cdr pointers.
This shouldn't affect anyone who isn't forking cdrs before a
dial, and should correct the cdr's of those that do.
So, this change ends up correcting the dstchannel
and userfield; the disposition was fixed by a previous
patch, it was OK coming into this problem.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@142576 65c4cc65-6c06-0410-ace0-fbb531ad65f3
2008-09-11 23:12:53 +00:00
if ( peer_cdr & & ! ast_tvzero ( peer_cdr - > answer ) ) {
bridge_cdr - > answer = peer_cdr - > answer ;
chan_cdr - > answer = peer_cdr - > answer ;
bridge_cdr - > disposition = peer_cdr - > disposition ;
chan_cdr - > disposition = peer_cdr - > disposition ;
Merged revisions 135799 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r135799 | murf | 2008-08-05 17:13:20 -0600 (Tue, 05 Aug 2008) | 34 lines
(closes issue #12982)
Reported by: bcnit
Tested by: murf
I discovered that also, in the previous bug fixes and changes,
the cdr.conf 'unanswered' option is not being obeyed, so
I fixed this.
And, yes, there are two 'answer' times involved in this
scenario, and I would agree with you, that the first
answer time is the time that should appear in the CDR.
(the second 'answer' time is the time that the bridge
was begun).
I made the necessary adjustments, recording the first
answer time into the peer cdr, and then using that to
override the bridge cdr's value.
To get the 'unanswered' CDRs to appear, I purposely
output them, using the dial cmd to mark them as
DIALED (with a new flag), and outputting them if
they bear that flag, and you are in the right mode.
I also corrected one small mention of the Zap device
to equally consider the dahdi device.
I heavily tested 10-sec-wait macros in dial, and
without the macro call; I tested hangups while the
macro was running vs. letting the macro complete
and the bridge form. Looks OK. Removed all the
instrumentation and debug.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@135821 65c4cc65-6c06-0410-ace0-fbb531ad65f3
2008-08-05 23:45:32 +00:00
} else {
ast_cdr_answer ( bridge_cdr ) ;
Merged revisions 142575 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r142575 | murf | 2008-09-11 16:55:49 -0600 (Thu, 11 Sep 2008) | 20 lines
(closes issue #13364)
Reported by: mdu113
Well, fundamentally, the problems revealed in 13364 are
because of the ForkCDR call that is done before the dial.
When the bridge is in place, it's dealing with the first
(and wrong) cdr in the list.
So, I wrote a little func to zip down to the first non-locked
cdr in the chain, and thru-out the ast_bridge_call, these
results are used instead of raw chan->cdr and peer->cdr pointers.
This shouldn't affect anyone who isn't forking cdrs before a
dial, and should correct the cdr's of those that do.
So, this change ends up correcting the dstchannel
and userfield; the disposition was fixed by a previous
patch, it was OK coming into this problem.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@142576 65c4cc65-6c06-0410-ace0-fbb531ad65f3
2008-09-11 23:12:53 +00:00
ast_cdr_answer ( chan_cdr ) ; /* for the sake of cli status checks */
Merged revisions 135799 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r135799 | murf | 2008-08-05 17:13:20 -0600 (Tue, 05 Aug 2008) | 34 lines
(closes issue #12982)
Reported by: bcnit
Tested by: murf
I discovered that also, in the previous bug fixes and changes,
the cdr.conf 'unanswered' option is not being obeyed, so
I fixed this.
And, yes, there are two 'answer' times involved in this
scenario, and I would agree with you, that the first
answer time is the time that should appear in the CDR.
(the second 'answer' time is the time that the bridge
was begun).
I made the necessary adjustments, recording the first
answer time into the peer cdr, and then using that to
override the bridge cdr's value.
To get the 'unanswered' CDRs to appear, I purposely
output them, using the dial cmd to mark them as
DIALED (with a new flag), and outputting them if
they bear that flag, and you are in the right mode.
I also corrected one small mention of the Zap device
to equally consider the dahdi device.
I heavily tested 10-sec-wait macros in dial, and
without the macro call; I tested hangups while the
macro was running vs. letting the macro complete
and the bridge form. Looks OK. Removed all the
instrumentation and debug.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@135821 65c4cc65-6c06-0410-ace0-fbb531ad65f3
2008-08-05 23:45:32 +00:00
}
Merged revisions 142575 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r142575 | murf | 2008-09-11 16:55:49 -0600 (Thu, 11 Sep 2008) | 20 lines
(closes issue #13364)
Reported by: mdu113
Well, fundamentally, the problems revealed in 13364 are
because of the ForkCDR call that is done before the dial.
When the bridge is in place, it's dealing with the first
(and wrong) cdr in the list.
So, I wrote a little func to zip down to the first non-locked
cdr in the chain, and thru-out the ast_bridge_call, these
results are used instead of raw chan->cdr and peer->cdr pointers.
This shouldn't affect anyone who isn't forking cdrs before a
dial, and should correct the cdr's of those that do.
So, this change ends up correcting the dstchannel
and userfield; the disposition was fixed by a previous
patch, it was OK coming into this problem.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@142576 65c4cc65-6c06-0410-ace0-fbb531ad65f3
2008-09-11 23:12:53 +00:00
ast_set_flag ( chan_cdr , AST_CDR_FLAG_BRIDGED ) ;
if ( peer_cdr ) {
ast_set_flag ( peer_cdr , AST_CDR_FLAG_BRIDGED ) ;
Merged revisions 134883 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r134883 | murf | 2008-07-31 13:23:42 -0600 (Thu, 31 Jul 2008) | 51 lines
(closes issue #11849)
Reported by: greyvoip
Tested by: murf
OK, a few days of debugging, a bunch of instrumentation
in chan_sip, main/channel.c, main/pbx.c, etc. and 5 solid
notebook pages of notes later, I have made the small
tweek necc. to get the start time right on the second
CDR when:
A Calls B
B answ.
A hits Xfer button on sip phone,
A dials C and hits the OK button,
A hangs up
C answers ringing phone
B and C converse
B and/or C hangs up
But does not harm the scenario where:
A Calls B
B answ.
B hits xfer button on sip phone,
B dials C and hits the OK button,
B hangs up
C answers ringing phone
A and C converse
A and/or C hangs up
The difference in start times on the second CDR is because
of a Masquerade on the B channel when the xfer number is
sent. It ends up replacing the CDR on the B channel with
a duplicate, which ends up getting tossed out. We keep
a pointer to the first CDR, and update *that* after the
bridge closes. But, only if the CDR has changed.
I hope this change is specific enough not to muck
up any current CDR-based apps. In my defence, I
assert that the previous information was wrong,
and this change fixes it, and possibly other
similar scenarios.
I wonder if I should be doing the same thing
for the channel, as I did for the peer, but
I can't think of a scenario this might affect.
I leave it, then, as an exersize for the users,
to find the scenario where the chan's CDR
changes and loses the proper start time.
........
and as to 1.4 to trunk; have I expressed my
feelings about code shifting from one file
to another? Good.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@134922 65c4cc65-6c06-0410-ace0-fbb531ad65f3
2008-07-31 19:48:08 +00:00
}
2008-07-03 17:16:44 +00:00
}
2001-12-27 11:07:33 +00:00
for ( ; ; ) {
2006-04-14 23:20:29 +00:00
struct ast_channel * other ; /* used later */
2008-07-03 17:16:44 +00:00
2005-07-25 17:31:53 +00:00
res = ast_channel_bridge ( chan , peer , config , & f , & who ) ;
2005-08-03 04:42:59 +00:00
if ( config - > feature_timer ) {
2004-08-06 13:54:07 +00:00
/* Update time limit for next pass */
Merged revisions 43779 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
................
r43779 | russell | 2006-09-27 12:55:49 -0400 (Wed, 27 Sep 2006) | 50 lines
Merged revisions 43778 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.2
........
r43778 | russell | 2006-09-27 12:54:30 -0400 (Wed, 27 Sep 2006) | 42 lines
Fix a problem that occurred if a user entered a digit that matched a bridge
feature that was configured using multiple digits, and the digit that was
pressed timed out in the feature digit timeout period. For example, if blind
transfer is configured as '##', and a user presses just '#'. In this situation,
the call would lock up and no longer pass any frames.
(issue #7977 reported by festr, and issue #7982 reported by michaels and
valuable input provided by mneuhauser and kuj. Fixed by me, with testing help
and peer review from Joshua Colp).
There are a couple of issues involved in this fix:
1) When ast_generic_bridge determines that there has been a timeout, it returned
AST_BRIDGE_RETRY. Then, when ast_channel_bridge gets this result, it calls
ast_generic_bridge over again with the same timestamp for the next event.
This results in an endless loop of nothing until the call is terminated.
This is resolved by simply changing ast_generic_bridge to return
AST_BRIDGE_COMPLETE when it sees a timeout.
2) I also changed ast_channel_bridge such that if in the process of calculating
the time until the next event, it knows a timeout has already occured, to
immediately return AST_BRIDGE_COMPLETE instead of attempting to bridge the
channels anyway.
3) In the process of testing the previous two changes, I ran into a problem in
res_features where ast_channel_bridge would return because it determined
that there was a timeout. However, ast_bridge_call in res_features would
then determine by its own calculation that there was still 1 ms before the
timeout really occurs. It would then proceed, and since the bridge broke
out and did *not* return a frame, it interpreted this as the call was over
and hung up the channels.
The reason for this was because ast_bridge_call in res_features and
ast_channel_bridge in channel.c were using different times for their
calculations. channel.c uses the start_time on the bridge config, which
is the time that the feature digit was recieved. However, res_features
had another time, 'start', which was set right before calling
ast_channel_bridge. 'start' will always be slightly after start_time in the
bridge config, and sometimes enough to round up to one ms.
This is fixed by making ast_bridge_call use the same time as
ast_channel_bridge for the timeout calculation.
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@43780 65c4cc65-6c06-0410-ace0-fbb531ad65f3
2006-09-27 16:57:44 +00:00
diff = ast_tvdiff_ms ( ast_tvnow ( ) , config - > start_time ) ;
2005-08-03 04:42:59 +00:00
config - > feature_timer - = diff ;
2005-01-04 04:01:40 +00:00
if ( hasfeatures ) {
/* Running on backup config, meaning a feature might be being
activated , but that ' s no excuse to keep things going
indefinitely ! */
2005-08-03 04:42:59 +00:00
if ( backup_config . feature_timer & & ( ( backup_config . feature_timer - = diff ) < = 0 ) ) {
2007-06-14 19:39:12 +00:00
ast_debug ( 1 , " Timed out, realtime this time! \n " ) ;
2005-08-03 04:42:59 +00:00
config - > feature_timer = 0 ;
2005-01-04 04:01:40 +00:00
who = chan ;
if ( f )
ast_frfree ( f ) ;
f = NULL ;
res = 0 ;
2005-08-03 04:42:59 +00:00
} else if ( config - > feature_timer < = 0 ) {
2005-01-04 04:01:40 +00:00
/* Not *really* out of time, just out of time for
digits to come in for features . */
2007-06-14 19:39:12 +00:00
ast_debug ( 1 , " Timed out for feature! \n " ) ;
2005-01-04 04:01:40 +00:00
if ( ! ast_strlen_zero ( peer_featurecode ) ) {
2007-08-06 21:52:30 +00:00
ast_dtmf_stream ( chan , peer , peer_featurecode , 0 , 0 ) ;
2005-01-04 04:01:40 +00:00
memset ( peer_featurecode , 0 , sizeof ( peer_featurecode ) ) ;
}
if ( ! ast_strlen_zero ( chan_featurecode ) ) {
2007-08-06 21:52:30 +00:00
ast_dtmf_stream ( peer , chan , chan_featurecode , 0 , 0 ) ;
2005-01-04 04:01:40 +00:00
memset ( chan_featurecode , 0 , sizeof ( chan_featurecode ) ) ;
}
if ( f )
ast_frfree ( f ) ;
hasfeatures = ! ast_strlen_zero ( chan_featurecode ) | | ! ast_strlen_zero ( peer_featurecode ) ;
if ( ! hasfeatures ) {
/* Restore original (possibly time modified) bridge config */
memcpy ( config , & backup_config , sizeof ( struct ast_bridge_config ) ) ;
memset ( & backup_config , 0 , sizeof ( backup_config ) ) ;
}
hadfeatures = hasfeatures ;
/* Continue as we were */
continue ;
Merged revisions 43779 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
................
r43779 | russell | 2006-09-27 12:55:49 -0400 (Wed, 27 Sep 2006) | 50 lines
Merged revisions 43778 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.2
........
r43778 | russell | 2006-09-27 12:54:30 -0400 (Wed, 27 Sep 2006) | 42 lines
Fix a problem that occurred if a user entered a digit that matched a bridge
feature that was configured using multiple digits, and the digit that was
pressed timed out in the feature digit timeout period. For example, if blind
transfer is configured as '##', and a user presses just '#'. In this situation,
the call would lock up and no longer pass any frames.
(issue #7977 reported by festr, and issue #7982 reported by michaels and
valuable input provided by mneuhauser and kuj. Fixed by me, with testing help
and peer review from Joshua Colp).
There are a couple of issues involved in this fix:
1) When ast_generic_bridge determines that there has been a timeout, it returned
AST_BRIDGE_RETRY. Then, when ast_channel_bridge gets this result, it calls
ast_generic_bridge over again with the same timestamp for the next event.
This results in an endless loop of nothing until the call is terminated.
This is resolved by simply changing ast_generic_bridge to return
AST_BRIDGE_COMPLETE when it sees a timeout.
2) I also changed ast_channel_bridge such that if in the process of calculating
the time until the next event, it knows a timeout has already occured, to
immediately return AST_BRIDGE_COMPLETE instead of attempting to bridge the
channels anyway.
3) In the process of testing the previous two changes, I ran into a problem in
res_features where ast_channel_bridge would return because it determined
that there was a timeout. However, ast_bridge_call in res_features would
then determine by its own calculation that there was still 1 ms before the
timeout really occurs. It would then proceed, and since the bridge broke
out and did *not* return a frame, it interpreted this as the call was over
and hung up the channels.
The reason for this was because ast_bridge_call in res_features and
ast_channel_bridge in channel.c were using different times for their
calculations. channel.c uses the start_time on the bridge config, which
is the time that the feature digit was recieved. However, res_features
had another time, 'start', which was set right before calling
ast_channel_bridge. 'start' will always be slightly after start_time in the
bridge config, and sometimes enough to round up to one ms.
This is fixed by making ast_bridge_call use the same time as
ast_channel_bridge for the timeout calculation.
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@43780 65c4cc65-6c06-0410-ace0-fbb531ad65f3
2006-09-27 16:57:44 +00:00
} else if ( ! f ) {
/* The bridge returned without a frame and there is a feature in progress.
* However , we don ' t think the feature has quite yet timed out , so just
* go back into the bridge . */
continue ;
}
2005-01-04 04:01:40 +00:00
} else {
2005-08-03 04:42:59 +00:00
if ( config - > feature_timer < = 0 ) {
2005-01-04 04:01:40 +00:00
/* We ran out of time */
2005-08-03 04:42:59 +00:00
config - > feature_timer = 0 ;
2005-01-04 04:01:40 +00:00
who = chan ;
if ( f )
ast_frfree ( f ) ;
f = NULL ;
res = 0 ;
}
2004-08-06 13:54:07 +00:00
}
}
2001-12-27 11:07:33 +00:00
if ( res < 0 ) {
2007-10-30 16:15:23 +00:00
if ( ! ast_test_flag ( chan , AST_FLAG_ZOMBIE ) & & ! ast_test_flag ( peer , AST_FLAG_ZOMBIE ) & & ! ast_check_hangup ( chan ) & & ! ast_check_hangup ( peer ) )
ast_log ( LOG_WARNING , " Bridge failed on channels %s and %s \n " , chan - > name , peer - > name ) ;
Merged revisions 135799 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r135799 | murf | 2008-08-05 17:13:20 -0600 (Tue, 05 Aug 2008) | 34 lines
(closes issue #12982)
Reported by: bcnit
Tested by: murf
I discovered that also, in the previous bug fixes and changes,
the cdr.conf 'unanswered' option is not being obeyed, so
I fixed this.
And, yes, there are two 'answer' times involved in this
scenario, and I would agree with you, that the first
answer time is the time that should appear in the CDR.
(the second 'answer' time is the time that the bridge
was begun).
I made the necessary adjustments, recording the first
answer time into the peer cdr, and then using that to
override the bridge cdr's value.
To get the 'unanswered' CDRs to appear, I purposely
output them, using the dial cmd to mark them as
DIALED (with a new flag), and outputting them if
they bear that flag, and you are in the right mode.
I also corrected one small mention of the Zap device
to equally consider the dahdi device.
I heavily tested 10-sec-wait macros in dial, and
without the macro call; I tested hangups while the
macro was running vs. letting the macro complete
and the bridge form. Looks OK. Removed all the
instrumentation and debug.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@135821 65c4cc65-6c06-0410-ace0-fbb531ad65f3
2008-08-05 23:45:32 +00:00
goto before_you_go ;
2001-12-27 11:07:33 +00:00
}
2006-04-16 18:37:01 +00:00
if ( ! f | | ( f - > frametype = = AST_FRAME_CONTROL & &
( f - > subclass = = AST_CONTROL_HANGUP | | f - > subclass = = AST_CONTROL_BUSY | |
Merge changes from team/russell/issue_5841:
This patch adds a "Bridge" Manager action, as well as a "Bridge" dialplan
application. The manager action will allow you to steal two active channels
in the system and bridge them together. Then, the one that did not hang up
will continue in the dialplan. Using the application will bridge the calling
channel to an arbitrary channel in the system. Whichever channel does not
hang up here will continue in the dialplan, as well.
This patch has been touched by a bunch of people over the course of a couple
years. Please forgive me if I have missed your name in the history of things.
The most recent patch came from issue #5841, but there is also a reference to
an earlier version of this patch from issue #4297. The people involved in writing
and/or reviewing the code include at least: twisted, mflorrel, heath1444, davetroy,
tim_ringenbach, moy, tmancill, serge-v, and me. There are also positive test
reports from many people.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@61281 65c4cc65-6c06-0410-ace0-fbb531ad65f3
2007-04-10 20:44:44 +00:00
f - > subclass = = AST_CONTROL_CONGESTION ) ) ) {
2006-04-16 18:37:01 +00:00
res = - 1 ;
break ;
2001-12-27 11:07:33 +00:00
}
2006-04-14 23:20:29 +00:00
/* many things should be sent to the 'other' channel */
other = ( who = = chan ) ? peer : chan ;
if ( f - > frametype = = AST_FRAME_CONTROL ) {
2007-07-05 20:51:08 +00:00
switch ( f - > subclass ) {
case AST_CONTROL_RINGING :
case AST_CONTROL_FLASH :
case - 1 :
ast_indicate ( other , f - > subclass ) ;
break ;
case AST_CONTROL_HOLD :
case AST_CONTROL_UNHOLD :
2008-05-22 16:29:54 +00:00
ast_indicate_data ( other , f - > subclass , f - > data . ptr , f - > datalen ) ;
2007-07-05 20:51:08 +00:00
break ;
case AST_CONTROL_OPTION :
2008-05-22 16:29:54 +00:00
aoh = f - > data . ptr ;
2006-04-14 23:20:29 +00:00
/* Forward option Requests */
2007-07-05 20:51:08 +00:00
if ( aoh & & aoh - > flag = = AST_OPTION_FLAG_REQUEST ) {
ast_channel_setoption ( other , ntohs ( aoh - > option ) , aoh - > data ,
f - > datalen - sizeof ( struct ast_option_header ) , 0 ) ;
}
break ;
2001-12-27 11:07:33 +00:00
}
2006-08-31 01:59:02 +00:00
} else if ( f - > frametype = = AST_FRAME_DTMF_BEGIN ) {
/* eat it */
} else if ( f - > frametype = = AST_FRAME_DTMF ) {
2005-01-04 04:01:40 +00:00
char * featurecode ;
int sense ;
2005-07-25 17:31:53 +00:00
2005-01-04 04:01:40 +00:00
hadfeatures = hasfeatures ;
/* This cannot overrun because the longest feature is one shorter than our buffer */
if ( who = = chan ) {
sense = FEATURE_SENSE_CHAN ;
featurecode = chan_featurecode ;
} else {
sense = FEATURE_SENSE_PEER ;
featurecode = peer_featurecode ;
}
2006-04-17 04:31:21 +00:00
/*! append the event to featurecode. we rely on the string being zero-filled, and
* not overflowing it .
* \ todo XXX how do we guarantee the latter ?
2006-04-14 23:20:29 +00:00
*/
2005-01-04 04:01:40 +00:00
featurecode [ strlen ( featurecode ) ] = f - > subclass ;
2006-05-23 16:37:40 +00:00
/* Get rid of the frame before we start doing "stuff" with the channels */
ast_frfree ( f ) ;
f = NULL ;
2005-08-03 04:42:59 +00:00
config - > feature_timer = backup_config . feature_timer ;
2005-01-04 04:01:40 +00:00
res = ast_feature_interpret ( chan , peer , config , featurecode , sense ) ;
switch ( res ) {
2008-04-08 17:32:42 +00:00
case AST_FEATURE_RETURN_PASSDIGITS :
2007-08-06 21:52:30 +00:00
ast_dtmf_stream ( other , who , featurecode , 0 , 0 ) ;
2005-01-04 04:01:40 +00:00
/* Fall through */
2008-04-08 17:32:42 +00:00
case AST_FEATURE_RETURN_SUCCESS :
2005-01-04 04:01:40 +00:00
memset ( featurecode , 0 , sizeof ( chan_featurecode ) ) ;
break ;
}
2008-04-08 17:32:42 +00:00
if ( res > = AST_FEATURE_RETURN_PASSDIGITS ) {
2001-12-27 11:07:33 +00:00
res = 0 ;
2006-05-23 16:37:40 +00:00
} else
2005-01-04 04:01:40 +00:00
break ;
hasfeatures = ! ast_strlen_zero ( chan_featurecode ) | | ! ast_strlen_zero ( peer_featurecode ) ;
if ( hadfeatures & & ! hasfeatures ) {
/* Restore backup */
memcpy ( config , & backup_config , sizeof ( struct ast_bridge_config ) ) ;
memset ( & backup_config , 0 , sizeof ( struct ast_bridge_config ) ) ;
} else if ( hasfeatures ) {
if ( ! hadfeatures ) {
/* Backup configuration */
memcpy ( & backup_config , config , sizeof ( struct ast_bridge_config ) ) ;
/* Setup temporary config options */
config - > play_warning = 0 ;
2005-01-10 14:46:59 +00:00
ast_clear_flag ( & ( config - > features_caller ) , AST_FEATURE_PLAY_WARNING ) ;
2005-07-25 17:31:53 +00:00
ast_clear_flag ( & ( config - > features_callee ) , AST_FEATURE_PLAY_WARNING ) ;
2005-01-04 04:01:40 +00:00
config - > warning_freq = 0 ;
config - > warning_sound = NULL ;
config - > end_sound = NULL ;
config - > start_sound = NULL ;
config - > firstpass = 0 ;
}
2006-08-01 23:09:28 +00:00
config - > start_time = ast_tvnow ( ) ;
2005-08-03 04:42:59 +00:00
config - > feature_timer = featuredigittimeout ;
2007-06-14 19:39:12 +00:00
ast_debug ( 1 , " Set time limit to %ld \n " , config - > feature_timer ) ;
2001-12-27 11:07:33 +00:00
}
2005-01-04 04:01:40 +00:00
}
if ( f )
ast_frfree ( f ) ;
2007-04-10 05:41:34 +00:00
2001-12-27 11:07:33 +00:00
}
Merged revisions 135799 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r135799 | murf | 2008-08-05 17:13:20 -0600 (Tue, 05 Aug 2008) | 34 lines
(closes issue #12982)
Reported by: bcnit
Tested by: murf
I discovered that also, in the previous bug fixes and changes,
the cdr.conf 'unanswered' option is not being obeyed, so
I fixed this.
And, yes, there are two 'answer' times involved in this
scenario, and I would agree with you, that the first
answer time is the time that should appear in the CDR.
(the second 'answer' time is the time that the bridge
was begun).
I made the necessary adjustments, recording the first
answer time into the peer cdr, and then using that to
override the bridge cdr's value.
To get the 'unanswered' CDRs to appear, I purposely
output them, using the dial cmd to mark them as
DIALED (with a new flag), and outputting them if
they bear that flag, and you are in the right mode.
I also corrected one small mention of the Zap device
to equally consider the dahdi device.
I heavily tested 10-sec-wait macros in dial, and
without the macro call; I tested hangups while the
macro was running vs. letting the macro complete
and the bridge form. Looks OK. Removed all the
instrumentation and debug.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@135821 65c4cc65-6c06-0410-ace0-fbb531ad65f3
2008-08-05 23:45:32 +00:00
before_you_go :
2008-09-23 16:52:32 +00:00
new_chan_cdr = pick_unlocked_cdr ( chan - > cdr ) ; /* the proper chan cdr, if there are forked cdrs */
new_peer_cdr = pick_unlocked_cdr ( peer - > cdr ) ; /* the proper chan cdr, if there are forked cdrs */
Merged revisions 142675 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r142675 | murf | 2008-09-11 22:29:34 -0600 (Thu, 11 Sep 2008) | 29 lines
Tested by: sergee, murf, chris-mac, andrew, KNK
This is a "second attempt" to restore the previous "endbeforeh" behavior
in 1.4 and up. In order to capture information concerning all the
legs of transfers in all their infinite combinations, I was forced
to this particular solution by a chain of logical necessities, the
first being that I was not allowed to rewrite the CDR mechanism from
the ground up!
This change basically leaves the original machinery alone, which allows
IVR and local channel type situations to generate CDR's as normal, but
a channel flag can be set to suppress the normal running of the h exten.
That flag would be set by the code that runs the h exten from the
ast_bridge_call routine, to prevent the h exten from being run twice.
Also, a flag in the ast_bridge_config struct passed into ast_bridge_call
can be used to suppress the running of the h exten in that routine. This
would happen, for instance, if you use the 'g' option in the Dial app.
Running this routine 'early' allows not only the CDR() func to be used
in the h extension for reading CDR variables, but also allows them to
be modified before the CDR is posted to the backends.
While I dearly hope that this patch overcomes all problems, and
introduces no new problems, reality suggests that surely someone
will have problems. In this case, please re-open 13251 (or 13289),
and we'll see if we can't fix any remaining issues.
** trunk note: some code to suppress the h exten being run
from app_queue was added; for the 'continue' option available
only in trunk/1.6.x.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@142676 65c4cc65-6c06-0410-ace0-fbb531ad65f3
2008-09-12 04:50:48 +00:00
if ( ! ast_test_flag ( & ( config - > features_caller ) , AST_FEATURE_NO_H_EXTEN ) & & ast_exists_extension ( chan , chan - > context , " h " , 1 , chan - > cid . cid_num ) ) {
struct ast_cdr * swapper ;
char savelastapp [ AST_MAX_EXTENSION ] ;
char savelastdata [ AST_MAX_EXTENSION ] ;
char save_exten [ AST_MAX_EXTENSION ] ;
int save_prio ;
int found = 0 ; /* set if we find at least one match */
2008-09-23 16:52:32 +00:00
if ( ast_opt_end_cdr_before_h_exten ) {
Merged revisions 142675 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r142675 | murf | 2008-09-11 22:29:34 -0600 (Thu, 11 Sep 2008) | 29 lines
Tested by: sergee, murf, chris-mac, andrew, KNK
This is a "second attempt" to restore the previous "endbeforeh" behavior
in 1.4 and up. In order to capture information concerning all the
legs of transfers in all their infinite combinations, I was forced
to this particular solution by a chain of logical necessities, the
first being that I was not allowed to rewrite the CDR mechanism from
the ground up!
This change basically leaves the original machinery alone, which allows
IVR and local channel type situations to generate CDR's as normal, but
a channel flag can be set to suppress the normal running of the h exten.
That flag would be set by the code that runs the h exten from the
ast_bridge_call routine, to prevent the h exten from being run twice.
Also, a flag in the ast_bridge_config struct passed into ast_bridge_call
can be used to suppress the running of the h exten in that routine. This
would happen, for instance, if you use the 'g' option in the Dial app.
Running this routine 'early' allows not only the CDR() func to be used
in the h extension for reading CDR variables, but also allows them to
be modified before the CDR is posted to the backends.
While I dearly hope that this patch overcomes all problems, and
introduces no new problems, reality suggests that surely someone
will have problems. In this case, please re-open 13251 (or 13289),
and we'll see if we can't fix any remaining issues.
** trunk note: some code to suppress the h exten being run
from app_queue was added; for the 'continue' option available
only in trunk/1.6.x.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@142676 65c4cc65-6c06-0410-ace0-fbb531ad65f3
2008-09-12 04:50:48 +00:00
ast_cdr_end ( bridge_cdr ) ;
}
/* swap the bridge cdr and the chan cdr for a moment, and let the endbridge
dialplan code operate on it */
swapper = chan - > cdr ;
ast_copy_string ( savelastapp , bridge_cdr - > lastapp , sizeof ( bridge_cdr - > lastapp ) ) ;
ast_copy_string ( savelastdata , bridge_cdr - > lastdata , sizeof ( bridge_cdr - > lastdata ) ) ;
ast_channel_lock ( chan ) ;
chan - > cdr = bridge_cdr ;
ast_copy_string ( save_exten , chan - > exten , sizeof ( save_exten ) ) ;
save_prio = chan - > priority ;
ast_copy_string ( chan - > exten , " h " , sizeof ( chan - > exten ) ) ;
chan - > priority = 1 ;
ast_channel_unlock ( chan ) ;
2008-10-01 21:06:26 +00:00
while ( ! ( res = ast_spawn_extension ( chan , chan - > context , chan - > exten , chan - > priority , chan - > cid . cid_num , & found , 1 ) ) = = 0 ) {
Merged revisions 142675 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r142675 | murf | 2008-09-11 22:29:34 -0600 (Thu, 11 Sep 2008) | 29 lines
Tested by: sergee, murf, chris-mac, andrew, KNK
This is a "second attempt" to restore the previous "endbeforeh" behavior
in 1.4 and up. In order to capture information concerning all the
legs of transfers in all their infinite combinations, I was forced
to this particular solution by a chain of logical necessities, the
first being that I was not allowed to rewrite the CDR mechanism from
the ground up!
This change basically leaves the original machinery alone, which allows
IVR and local channel type situations to generate CDR's as normal, but
a channel flag can be set to suppress the normal running of the h exten.
That flag would be set by the code that runs the h exten from the
ast_bridge_call routine, to prevent the h exten from being run twice.
Also, a flag in the ast_bridge_config struct passed into ast_bridge_call
can be used to suppress the running of the h exten in that routine. This
would happen, for instance, if you use the 'g' option in the Dial app.
Running this routine 'early' allows not only the CDR() func to be used
in the h extension for reading CDR variables, but also allows them to
be modified before the CDR is posted to the backends.
While I dearly hope that this patch overcomes all problems, and
introduces no new problems, reality suggests that surely someone
will have problems. In this case, please re-open 13251 (or 13289),
and we'll see if we can't fix any remaining issues.
** trunk note: some code to suppress the h exten being run
from app_queue was added; for the 'continue' option available
only in trunk/1.6.x.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@142676 65c4cc65-6c06-0410-ace0-fbb531ad65f3
2008-09-12 04:50:48 +00:00
chan - > priority + + ;
}
if ( found & & res )
{
/* Something bad happened, or a hangup has been requested. */
ast_debug ( 1 , " Spawn extension (%s,%s,%d) exited non-zero on '%s' \n " , chan - > context , chan - > exten , chan - > priority , chan - > name ) ;
ast_verb ( 2 , " Spawn extension (%s, %s, %d) exited non-zero on '%s' \n " , chan - > context , chan - > exten , chan - > priority , chan - > name ) ;
}
/* swap it back */
ast_channel_lock ( chan ) ;
ast_copy_string ( chan - > exten , save_exten , sizeof ( chan - > exten ) ) ;
chan - > priority = save_prio ;
chan - > cdr = swapper ;
ast_set_flag ( chan , AST_FLAG_BRIDGE_HANGUP_RUN ) ;
ast_channel_unlock ( chan ) ;
/* protect the lastapp/lastdata against the effects of the hangup/dialplan code */
ast_copy_string ( bridge_cdr - > lastapp , savelastapp , sizeof ( bridge_cdr - > lastapp ) ) ;
ast_copy_string ( bridge_cdr - > lastdata , savelastdata , sizeof ( bridge_cdr - > lastdata ) ) ;
}
2008-07-03 17:16:44 +00:00
/* obey the NoCDR() wishes. */
2008-09-23 16:52:32 +00:00
if ( new_chan_cdr & & ast_test_flag ( new_chan_cdr , AST_CDR_FLAG_POST_DISABLED ) & & new_peer_cdr & & ! ast_test_flag ( new_peer_cdr , AST_CDR_FLAG_POST_DISABLED ) )
ast_set_flag ( new_peer_cdr , AST_CDR_FLAG_POST_DISABLED ) ; /* DISABLED is viral-- it will propagate across a bridge */
if ( ! new_chan_cdr | | ( new_chan_cdr & & ! ast_test_flag ( new_chan_cdr , AST_CDR_FLAG_POST_DISABLED ) ) ) {
struct ast_channel * chan_ptr = NULL ;
2008-07-03 17:16:44 +00:00
ast_cdr_end ( bridge_cdr ) ;
ast_cdr_detach ( bridge_cdr ) ;
2008-09-23 16:52:32 +00:00
/* do a specialized reset on the beginning channel
CDR ' s , if they still exist , so as not to mess up
issues in future bridges ;
Here are the rules of the game :
1. The chan and peer channel pointers will not change
during the life of the bridge .
2. But , in transfers , the channel names will change .
between the time the bridge is started , and the
time the channel ends .
Usually , when a channel changes names , it will
also change CDR pointers .
3. Usually , only one of the two channels ( chan or peer )
will change names .
4. Usually , if a channel changes names during a bridge ,
it is because of a transfer . Usually , in these situations ,
it is normal to see 2 bridges running simultaneously , and
it is not unusual to see the two channels that change
swapped between bridges .
5. After a bridge occurs , we have 2 or 3 channels ' CDRs
to attend to ; if the chan or peer changed names ,
we have the before and after attached CDR ' s .
*/
if ( strcasecmp ( orig_channame , chan - > name ) ! = 0 ) {
/* old channel */
chan_ptr = ast_get_channel_by_name_locked ( orig_channame ) ;
if ( chan_ptr ) {
if ( ! ast_bridged_channel ( chan_ptr ) ) {
struct ast_cdr * cur ;
for ( cur = chan_ptr - > cdr ; cur ; cur = cur - > next ) {
if ( cur = = chan_cdr ) {
break ;
}
}
if ( cur )
ast_cdr_specialized_reset ( chan_cdr , 0 ) ;
}
ast_channel_unlock ( chan_ptr ) ;
}
/* new channel */
ast_cdr_specialized_reset ( new_chan_cdr , 0 ) ;
} else {
ast_cdr_specialized_reset ( chan_cdr , 0 ) ; /* nothing changed, reset the chan_cdr */
}
if ( strcasecmp ( orig_peername , peer - > name ) ! = 0 ) {
/* old channel */
chan_ptr = ast_get_channel_by_name_locked ( orig_peername ) ;
if ( chan_ptr ) {
if ( ! ast_bridged_channel ( chan_ptr ) ) {
struct ast_cdr * cur ;
for ( cur = chan_ptr - > cdr ; cur ; cur = cur - > next ) {
if ( cur = = peer_cdr ) {
break ;
}
}
if ( cur )
ast_cdr_specialized_reset ( peer_cdr , 0 ) ;
}
ast_channel_unlock ( chan_ptr ) ;
}
/* new channel */
ast_cdr_specialized_reset ( new_peer_cdr , 0 ) ;
} else {
ast_cdr_specialized_reset ( peer_cdr , 0 ) ; /* nothing changed, reset the peer_cdr */
}
Merged revisions 135799 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r135799 | murf | 2008-08-05 17:13:20 -0600 (Tue, 05 Aug 2008) | 34 lines
(closes issue #12982)
Reported by: bcnit
Tested by: murf
I discovered that also, in the previous bug fixes and changes,
the cdr.conf 'unanswered' option is not being obeyed, so
I fixed this.
And, yes, there are two 'answer' times involved in this
scenario, and I would agree with you, that the first
answer time is the time that should appear in the CDR.
(the second 'answer' time is the time that the bridge
was begun).
I made the necessary adjustments, recording the first
answer time into the peer cdr, and then using that to
override the bridge cdr's value.
To get the 'unanswered' CDRs to appear, I purposely
output them, using the dial cmd to mark them as
DIALED (with a new flag), and outputting them if
they bear that flag, and you are in the right mode.
I also corrected one small mention of the Zap device
to equally consider the dahdi device.
I heavily tested 10-sec-wait macros in dial, and
without the macro call; I tested hangups while the
macro was running vs. letting the macro complete
and the bridge form. Looks OK. Removed all the
instrumentation and debug.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@135821 65c4cc65-6c06-0410-ace0-fbb531ad65f3
2008-08-05 23:45:32 +00:00
}
2001-12-27 11:07:33 +00:00
return res ;
}
2007-02-18 15:01:07 +00:00
/*! \brief Output parking event to manager */
static void post_manager_event ( const char * s , struct parkeduser * pu )
2006-04-21 16:04:25 +00:00
{
manager_event ( EVENT_FLAG_CALL , s ,
METERMAIDS:
-----------
- Adding devicestate providers, a new architecture to add non-channel related
device state information, like parking lots, queues, meetmes, vending machines
and Windows 98 reboots (lots of blinking on those lights)
- Adding provider for parking lots, so you can subscribe to the status of a
parking lot
- Adding provider for meetme, so you can have a blinking lamp for a meetme
( Example: exten => edvina,hint,meetme:1234 )
- Adding support for directed parking - set the PARKINGEXTEN before you manually
call Park() and you will be parked on that space. If it's occupied, dialplan
execution will continue.
This work was sponsored by Voop A/S - www.voop.com
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@36055 65c4cc65-6c06-0410-ace0-fbb531ad65f3
2006-06-26 16:43:21 +00:00
" Exten: %s \r \n "
2006-04-21 16:04:25 +00:00
" Channel: %s \r \n "
2008-04-21 23:42:45 +00:00
" Parkinglot: %s \r \n "
2006-10-02 20:35:16 +00:00
" CallerIDNum: %s \r \n "
2008-08-22 21:52:20 +00:00
" CallerIDName: %s \r \n "
2008-08-22 20:02:35 +00:00
" UniqueID: %s \r \n \r \n " ,
2007-02-18 15:01:07 +00:00
pu - > parkingexten ,
pu - > chan - > name ,
2008-04-21 23:42:45 +00:00
pu - > parkinglot - > name ,
2007-02-18 15:01:07 +00:00
S_OR ( pu - > chan - > cid . cid_num , " <unknown> " ) ,
2008-08-22 20:02:35 +00:00
S_OR ( pu - > chan - > cid . cid_name , " <unknown> " ) ,
pu - > chan - > uniqueid
2006-04-21 16:04:25 +00:00
) ;
}
2008-04-21 23:42:45 +00:00
/*! \brief Run management on parkinglots, collad once per parkinglot */
int manage_parkinglot ( struct ast_parkinglot * curlot , fd_set * rfds , fd_set * efds , fd_set * nrfds , fd_set * nefds , int * ms , int * max )
2001-12-27 11:07:33 +00:00
{
2006-11-01 17:09:47 +00:00
2008-04-21 23:42:45 +00:00
struct parkeduser * pu ;
int res = 0 ;
char parkingslot [ AST_MAX_EXTENSION ] ;
2004-12-09 22:39:14 +00:00
2008-04-21 23:42:45 +00:00
/* TODO: I believe this reference increase is not necessary since the iterator in the calling function already did so */
//parkinglot_addref(curlot);
/* Lock parking list */
AST_LIST_LOCK ( & curlot - > parkings ) ;
AST_LIST_TRAVERSE_SAFE_BEGIN ( & curlot - > parkings , pu , list ) {
struct ast_channel * chan = pu - > chan ; /* shorthand */
int tms ; /* timeout for this item */
int x ; /* fd index in channel */
struct ast_context * con ;
if ( pu - > notquiteyet ) { /* Pretend this one isn't here yet */
continue ;
}
tms = ast_tvdiff_ms ( ast_tvnow ( ) , pu - > start ) ;
if ( tms > pu - > parkingtime ) {
/* Stop music on hold */
ast_indicate ( pu - > chan , AST_CONTROL_UNHOLD ) ;
/* Get chan, exten from derived kludge */
if ( pu - > peername [ 0 ] ) {
char * peername = ast_strdupa ( pu - > peername ) ;
char * cp = strrchr ( peername , ' - ' ) ;
2008-06-12 17:27:55 +00:00
char peername_flat [ AST_MAX_EXTENSION ] ; /* using something like DAHDI/52 for an extension name is NOT a good idea */
2008-04-21 23:42:45 +00:00
int i ;
if ( cp )
* cp = 0 ;
ast_copy_string ( peername_flat , peername , sizeof ( peername_flat ) ) ;
for ( i = 0 ; peername_flat [ i ] & & i < AST_MAX_EXTENSION ; i + + ) {
if ( peername_flat [ i ] = = ' / ' )
peername_flat [ i ] = ' 0 ' ;
}
con = ast_context_find_or_create ( NULL , NULL , pu - > parkinglot - > parking_con_dial , registrar ) ;
if ( ! con ) {
ast_log ( LOG_ERROR , " Parking dial context '%s' does not exist and unable to create \n " , pu - > parkinglot - > parking_con_dial ) ;
}
if ( con ) {
char returnexten [ AST_MAX_EXTENSION ] ;
struct ast_datastore * features_datastore ;
struct ast_dial_features * dialfeatures = NULL ;
2008-03-01 01:30:37 +00:00
2008-04-21 23:42:45 +00:00
ast_channel_lock ( chan ) ;
2008-03-01 01:30:37 +00:00
2008-04-21 23:42:45 +00:00
if ( ( features_datastore = ast_channel_datastore_find ( chan , & dial_features_info , NULL ) ) )
dialfeatures = features_datastore - > data ;
2008-03-01 01:30:37 +00:00
2008-04-21 23:42:45 +00:00
ast_channel_unlock ( chan ) ;
2008-03-01 01:30:37 +00:00
2008-04-21 23:42:45 +00:00
if ( dialfeatures )
snprintf ( returnexten , sizeof ( returnexten ) , " %s,,%s " , peername , dialfeatures - > options ) ;
else /* Existing default */
snprintf ( returnexten , sizeof ( returnexten ) , " %s,,t " , peername ) ;
2008-03-01 01:30:37 +00:00
2008-04-21 23:42:45 +00:00
ast_add_extension2 ( con , 1 , peername_flat , 1 , NULL , NULL , " Dial " , ast_strdup ( returnexten ) , ast_free_ptr , registrar ) ;
}
if ( comebacktoorigin ) {
set_c_e_p ( chan , pu - > parkinglot - > parking_con_dial , peername_flat , 1 ) ;
2004-12-09 22:39:14 +00:00
} else {
2008-04-21 23:42:45 +00:00
ast_log ( LOG_WARNING , " now going to parkedcallstimeout,s,1 | ps is %d \n " , pu - > parkingnum ) ;
snprintf ( parkingslot , sizeof ( parkingslot ) , " %d " , pu - > parkingnum ) ;
pbx_builtin_setvar_helper ( chan , " PARKINGSLOT " , parkingslot ) ;
set_c_e_p ( chan , " parkedcallstimeout " , peername_flat , 1 ) ;
2004-12-09 22:39:14 +00:00
}
2008-04-21 23:42:45 +00:00
} else {
/* They've been waiting too long, send them back to where they came. Theoretically they
should have their original extensions and such , but we copy to be on the safe side */
set_c_e_p ( chan , pu - > context , pu - > exten , pu - > priority ) ;
}
post_manager_event ( " ParkedCallTimeOut " , pu ) ;
ast_verb ( 2 , " Timeout for %s parked on %d (%s). Returning to %s,%s,%d \n " , pu - > chan - > name , pu - > parkingnum , pu - > parkinglot - > name , pu - > chan - > context , pu - > chan - > exten , pu - > chan - > priority ) ;
/* Start up the PBX, or hang them up */
if ( ast_pbx_start ( chan ) ) {
ast_log ( LOG_WARNING , " Unable to restart the PBX for user on '%s', hanging them up... \n " , pu - > chan - > name ) ;
ast_hangup ( chan ) ;
}
/* And take them out of the parking lot */
con = ast_context_find ( pu - > parkinglot - > parking_con ) ;
if ( con ) {
2008-06-16 20:43:46 +00:00
if ( ast_context_remove_extension2 ( con , pu - > parkingexten , 1 , NULL , 0 ) )
2008-04-21 23:42:45 +00:00
ast_log ( LOG_WARNING , " Whoa, failed to remove the parking extension! \n " ) ;
else
notify_metermaids ( pu - > parkingexten , curlot - > parking_con , AST_DEVICE_NOT_INUSE ) ;
} else
ast_log ( LOG_WARNING , " Whoa, no parking context? \n " ) ;
AST_LIST_REMOVE_CURRENT ( list ) ;
parkinglot_unref ( curlot ) ;
} else { /* still within parking time, process descriptors */
for ( x = 0 ; x < AST_MAX_FDS ; x + + ) {
struct ast_frame * f ;
2005-02-26 07:54:28 +00:00
2008-04-29 18:58:48 +00:00
if ( ( chan - > fds [ x ] = = - 1 ) | | ( ! FD_ISSET ( chan - > fds [ x ] , rfds ) & & ! FD_ISSET ( pu - > chan - > fds [ x ] , efds ) ) )
2008-04-21 23:42:45 +00:00
continue ;
if ( FD_ISSET ( chan - > fds [ x ] , efds ) )
ast_set_flag ( chan , AST_FLAG_EXCEPTION ) ;
else
ast_clear_flag ( chan , AST_FLAG_EXCEPTION ) ;
chan - > fdno = x ;
/* See if they need servicing */
f = ast_read ( pu - > chan ) ;
/* Hangup? */
if ( ! f | | ( ( f - > frametype = = AST_FRAME_CONTROL ) & & ( f - > subclass = = AST_CONTROL_HANGUP ) ) ) {
if ( f )
ast_frfree ( f ) ;
post_manager_event ( " ParkedCallGiveUp " , pu ) ;
2005-02-26 07:54:28 +00:00
2008-04-21 23:42:45 +00:00
/* There's a problem, hang them up*/
ast_verb ( 2 , " %s got tired of being parked \n " , chan - > name ) ;
2006-04-16 21:41:06 +00:00
ast_hangup ( chan ) ;
2008-04-21 23:42:45 +00:00
/* And take them out of the parking lot */
con = ast_context_find ( curlot - > parking_con ) ;
if ( con ) {
2008-06-16 20:43:46 +00:00
if ( ast_context_remove_extension2 ( con , pu - > parkingexten , 1 , NULL , 0 ) )
2008-04-21 23:42:45 +00:00
ast_log ( LOG_WARNING , " Whoa, failed to remove the extension! \n " ) ;
else
notify_metermaids ( pu - > parkingexten , curlot - > parking_con , AST_DEVICE_NOT_INUSE ) ;
} else
ast_log ( LOG_WARNING , " Whoa, no parking context for parking lot %s? \n " , curlot - > name ) ;
AST_LIST_REMOVE_CURRENT ( list ) ;
parkinglot_unref ( curlot ) ;
break ;
} else {
/* XXX Maybe we could do something with packets, like dial "0" for operator or something XXX */
ast_frfree ( f ) ;
if ( pu - > moh_trys < 3 & & ! chan - > generatordata ) {
ast_debug ( 1 , " MOH on parked call stopped by outside source. Restarting on channel %s. \n " , chan - > name ) ;
ast_indicate_data ( chan , AST_CONTROL_HOLD ,
S_OR ( curlot - > mohclass , NULL ) ,
( ! ast_strlen_zero ( curlot - > mohclass ) ? strlen ( curlot - > mohclass ) + 1 : 0 ) ) ;
pu - > moh_trys + + ;
2006-04-16 19:12:51 +00:00
}
2008-04-21 23:42:45 +00:00
goto std ; /* XXX Ick: jumping into an else statement??? XXX */
}
} /* End for */
if ( x > = AST_MAX_FDS ) {
std : for ( x = 0 ; x < AST_MAX_FDS ; x + + ) { /* mark fds for next round */
if ( chan - > fds [ x ] > - 1 ) {
FD_SET ( chan - > fds [ x ] , nrfds ) ;
FD_SET ( chan - > fds [ x ] , nefds ) ;
if ( chan - > fds [ x ] > * max )
* max = chan - > fds [ x ] ;
2001-12-27 11:07:33 +00:00
}
}
2008-04-21 23:42:45 +00:00
/* Keep track of our shortest wait */
if ( tms < * ms | | * ms < 0 )
* ms = tms ;
2001-12-27 11:07:33 +00:00
}
2008-04-21 23:42:45 +00:00
}
}
AST_LIST_TRAVERSE_SAFE_END ;
AST_LIST_UNLOCK ( & curlot - > parkings ) ;
return res ;
}
/*!
* \ brief Take care of parked calls and unpark them if needed
* \ param ignore unused var .
*
* Start inf loop , lock parking lot , check if any parked channels have gone above timeout
* if so , remove channel from parking lot and return it to the extension that parked it .
* Check if parked channel decided to hangup , wait until next FD via select ( ) .
*/
static void * do_parking_thread ( void * ignore )
{
fd_set rfds , efds ; /* results from previous select, to be preserved across loops. */
fd_set nrfds , nefds ; /* args for the next select */
2008-05-29 19:10:31 +00:00
FD_ZERO ( & rfds ) ;
FD_ZERO ( & efds ) ;
2008-04-21 23:42:45 +00:00
for ( ; ; ) {
int res = 0 ;
int ms = - 1 ; /* select timeout, uninitialized */
int max = - 1 ; /* max fd, none there yet */
struct ao2_iterator iter ;
struct ast_parkinglot * curlot ;
2008-05-29 19:10:31 +00:00
FD_ZERO ( & nrfds ) ;
FD_ZERO ( & nefds ) ;
2008-04-21 23:42:45 +00:00
iter = ao2_iterator_init ( parkinglots , 0 ) ;
while ( ( curlot = ao2_iterator_next ( & iter ) ) ) {
res = manage_parkinglot ( curlot , & rfds , & efds , & nrfds , & nefds , & ms , & max ) ;
ao2_ref ( curlot , - 1 ) ;
}
2001-12-27 11:07:33 +00:00
rfds = nrfds ;
efds = nefds ;
2006-04-16 20:32:14 +00:00
{
2008-08-10 19:35:50 +00:00
struct timeval wait = ast_samp2tv ( ms , 1000 ) ;
2006-04-16 20:32:14 +00:00
/* Wait for something to happen */
2008-08-10 19:35:50 +00:00
ast_select ( max + 1 , & rfds , NULL , & efds , ( ms > - 1 ) ? & wait : NULL ) ;
2006-04-16 20:32:14 +00:00
}
2001-12-27 11:07:33 +00:00
pthread_testcancel ( ) ;
}
return NULL ; /* Never reached */
}
2008-04-21 23:42:45 +00:00
/*! \brief Find parkinglot by name */
struct ast_parkinglot * find_parkinglot ( const char * name )
{
struct ast_parkinglot * parkinglot = NULL ;
struct ast_parkinglot tmp_parkinglot ;
if ( ast_strlen_zero ( name ) )
return NULL ;
ast_copy_string ( tmp_parkinglot . name , name , sizeof ( tmp_parkinglot . name ) ) ;
parkinglot = ao2_find ( parkinglots , & tmp_parkinglot , OBJ_POINTER ) ;
if ( parkinglot & & option_debug )
ast_log ( LOG_DEBUG , " Found Parkinglot: %s \n " , parkinglot - > name ) ;
return parkinglot ;
}
2008-04-25 18:18:27 +00:00
AST_APP_OPTIONS ( park_call_options , BEGIN_OPTIONS
AST_APP_OPTION ( ' r ' , AST_PARK_OPT_RINGING ) ,
AST_APP_OPTION ( ' R ' , AST_PARK_OPT_RANDOMIZE ) ,
2008-08-29 17:53:32 +00:00
AST_APP_OPTION ( ' s ' , AST_PARK_OPT_SILENCE ) ,
2008-04-25 18:18:27 +00:00
END_OPTIONS ) ;
METERMAIDS:
-----------
- Adding devicestate providers, a new architecture to add non-channel related
device state information, like parking lots, queues, meetmes, vending machines
and Windows 98 reboots (lots of blinking on those lights)
- Adding provider for parking lots, so you can subscribe to the status of a
parking lot
- Adding provider for meetme, so you can have a blinking lamp for a meetme
( Example: exten => edvina,hint,meetme:1234 )
- Adding support for directed parking - set the PARKINGEXTEN before you manually
call Park() and you will be parked on that space. If it's occupied, dialplan
execution will continue.
This work was sponsored by Voop A/S - www.voop.com
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@36055 65c4cc65-6c06-0410-ace0-fbb531ad65f3
2006-06-26 16:43:21 +00:00
/*! \brief Park a call */
2004-08-03 06:31:20 +00:00
static int park_call_exec ( struct ast_channel * chan , void * data )
{
2007-11-21 19:20:33 +00:00
/* Cache the original channel name in case we get masqueraded in the middle
* of a park - - it is still theoretically possible for a transfer to happen before
* we get here , but it is _really_ unlikely */
char * orig_chan_name = ast_strdupa ( chan - > name ) ;
2008-01-04 22:57:56 +00:00
char orig_exten [ AST_MAX_EXTENSION ] ;
int orig_priority = chan - > priority ;
2004-08-03 06:31:20 +00:00
/* Data is unused at the moment but could contain a parking
lot context eventually */
2006-08-21 02:11:39 +00:00
int res = 0 ;
2008-05-24 00:37:01 +00:00
char * parse = NULL ;
2008-04-25 18:18:27 +00:00
AST_DECLARE_APP_ARGS ( app_args ,
AST_APP_ARG ( timeout ) ;
AST_APP_ARG ( return_con ) ;
AST_APP_ARG ( return_ext ) ;
AST_APP_ARG ( return_pri ) ;
AST_APP_ARG ( options ) ;
) ;
if ( ! ast_strlen_zero ( data ) ) {
parse = ast_strdupa ( data ) ;
AST_STANDARD_APP_ARGS ( app_args , parse ) ;
}
2008-01-04 22:57:56 +00:00
ast_copy_string ( orig_exten , chan - > exten , sizeof ( orig_exten ) ) ;
2004-08-03 06:31:20 +00:00
/* Setup the exten/priority to be s/1 since we don't know
where this call should return */
strcpy ( chan - > exten , " s " ) ;
chan - > priority = 1 ;
2008-04-25 18:18:27 +00:00
METERMAIDS:
-----------
- Adding devicestate providers, a new architecture to add non-channel related
device state information, like parking lots, queues, meetmes, vending machines
and Windows 98 reboots (lots of blinking on those lights)
- Adding provider for parking lots, so you can subscribe to the status of a
parking lot
- Adding provider for meetme, so you can have a blinking lamp for a meetme
( Example: exten => edvina,hint,meetme:1234 )
- Adding support for directed parking - set the PARKINGEXTEN before you manually
call Park() and you will be parked on that space. If it's occupied, dialplan
execution will continue.
This work was sponsored by Voop A/S - www.voop.com
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@36055 65c4cc65-6c06-0410-ace0-fbb531ad65f3
2006-06-26 16:43:21 +00:00
/* Answer if call is not up */
2004-08-03 06:31:20 +00:00
if ( chan - > _state ! = AST_STATE_UP )
res = ast_answer ( chan ) ;
2008-04-25 18:18:27 +00:00
METERMAIDS:
-----------
- Adding devicestate providers, a new architecture to add non-channel related
device state information, like parking lots, queues, meetmes, vending machines
and Windows 98 reboots (lots of blinking on those lights)
- Adding provider for parking lots, so you can subscribe to the status of a
parking lot
- Adding provider for meetme, so you can have a blinking lamp for a meetme
( Example: exten => edvina,hint,meetme:1234 )
- Adding support for directed parking - set the PARKINGEXTEN before you manually
call Park() and you will be parked on that space. If it's occupied, dialplan
execution will continue.
This work was sponsored by Voop A/S - www.voop.com
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@36055 65c4cc65-6c06-0410-ace0-fbb531ad65f3
2006-06-26 16:43:21 +00:00
/* Sleep to allow VoIP streams to settle down */
2004-08-03 06:31:20 +00:00
if ( ! res )
res = ast_safe_sleep ( chan , 1000 ) ;
2008-04-25 18:18:27 +00:00
METERMAIDS:
-----------
- Adding devicestate providers, a new architecture to add non-channel related
device state information, like parking lots, queues, meetmes, vending machines
and Windows 98 reboots (lots of blinking on those lights)
- Adding provider for parking lots, so you can subscribe to the status of a
parking lot
- Adding provider for meetme, so you can have a blinking lamp for a meetme
( Example: exten => edvina,hint,meetme:1234 )
- Adding support for directed parking - set the PARKINGEXTEN before you manually
call Park() and you will be parked on that space. If it's occupied, dialplan
execution will continue.
This work was sponsored by Voop A/S - www.voop.com
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@36055 65c4cc65-6c06-0410-ace0-fbb531ad65f3
2006-06-26 16:43:21 +00:00
/* Park the call */
2008-01-04 22:57:56 +00:00
if ( ! res ) {
2008-04-25 18:18:27 +00:00
struct ast_park_call_args args = {
. orig_chan_name = orig_chan_name ,
} ;
struct ast_flags flags = { 0 } ;
2008-05-24 00:37:01 +00:00
if ( parse & & ! ast_strlen_zero ( app_args . timeout ) ) {
2008-04-25 18:18:27 +00:00
if ( sscanf ( app_args . timeout , " %d " , & args . timeout ) ! = 1 ) {
ast_log ( LOG_WARNING , " Invalid timeout '%s' provided \n " , app_args . timeout ) ;
args . timeout = 0 ;
}
}
args . return_con = app_args . return_con ;
args . return_ext = app_args . return_ext ;
2008-05-24 00:37:01 +00:00
if ( parse & & ! ast_strlen_zero ( app_args . return_pri ) ) {
2008-04-25 18:18:27 +00:00
if ( sscanf ( app_args . return_pri , " %d " , & args . return_pri ) ! = 1 ) {
ast_log ( LOG_WARNING , " Invalid priority '%s' specified \n " , app_args . return_pri ) ;
args . return_pri = 0 ;
}
}
2008-08-29 17:53:32 +00:00
ast_app_parse_options ( park_call_options , & flags , NULL , app_args . options ) ;
2008-04-25 18:18:27 +00:00
args . flags = flags . flags ;
res = ast_park_call_full ( chan , chan , & args ) ;
2008-01-04 22:57:56 +00:00
/* Continue on in the dialplan */
if ( res = = 1 ) {
ast_copy_string ( chan - > exten , orig_exten , sizeof ( chan - > exten ) ) ;
chan - > priority = orig_priority ;
res = 0 ;
} else if ( ! res )
res = AST_PBX_KEEPALIVE ;
}
2006-08-21 02:11:39 +00:00
2008-01-04 22:57:56 +00:00
return res ;
2004-08-03 06:31:20 +00:00
}
METERMAIDS:
-----------
- Adding devicestate providers, a new architecture to add non-channel related
device state information, like parking lots, queues, meetmes, vending machines
and Windows 98 reboots (lots of blinking on those lights)
- Adding provider for parking lots, so you can subscribe to the status of a
parking lot
- Adding provider for meetme, so you can have a blinking lamp for a meetme
( Example: exten => edvina,hint,meetme:1234 )
- Adding support for directed parking - set the PARKINGEXTEN before you manually
call Park() and you will be parked on that space. If it's occupied, dialplan
execution will continue.
This work was sponsored by Voop A/S - www.voop.com
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@36055 65c4cc65-6c06-0410-ace0-fbb531ad65f3
2006-06-26 16:43:21 +00:00
/*! \brief Pickup parked call */
2008-04-21 23:42:45 +00:00
static int park_exec_full ( struct ast_channel * chan , void * data , struct ast_parkinglot * parkinglot )
2001-12-27 11:07:33 +00:00
{
2006-08-21 02:11:39 +00:00
int res = 0 ;
2001-12-27 11:07:33 +00:00
struct ast_channel * peer = NULL ;
2007-07-09 02:29:00 +00:00
struct parkeduser * pu ;
2004-08-03 06:31:20 +00:00
struct ast_context * con ;
2007-11-13 20:30:13 +00:00
int park = 0 ;
2004-04-26 23:22:34 +00:00
struct ast_bridge_config config ;
2007-11-13 20:56:32 +00:00
if ( data )
2007-11-13 20:30:13 +00:00
park = atoi ( ( char * ) data ) ;
2007-07-09 02:29:00 +00:00
2008-04-21 23:42:45 +00:00
parkinglot = find_parkinglot ( findparkinglotname ( chan ) ) ;
if ( ! parkinglot )
parkinglot = default_parkinglot ;
AST_LIST_LOCK ( & parkinglot - > parkings ) ;
AST_LIST_TRAVERSE_SAFE_BEGIN ( & parkinglot - > parkings , pu , list ) {
2007-11-13 20:30:13 +00:00
if ( ! data | | pu - > parkingnum = = park ) {
2007-11-08 05:28:47 +00:00
AST_LIST_REMOVE_CURRENT ( list ) ;
2001-12-27 11:07:33 +00:00
break ;
}
}
2007-07-09 02:29:00 +00:00
AST_LIST_TRAVERSE_SAFE_END
2008-04-21 23:42:45 +00:00
AST_LIST_UNLOCK ( & parkinglot - > parkings ) ;
2007-07-09 02:29:00 +00:00
2001-12-27 11:07:33 +00:00
if ( pu ) {
peer = pu - > chan ;
2008-04-21 23:42:45 +00:00
con = ast_context_find ( parkinglot - > parking_con ) ;
2004-08-03 06:31:20 +00:00
if ( con ) {
2008-06-16 20:43:46 +00:00
if ( ast_context_remove_extension2 ( con , pu - > parkingexten , 1 , NULL , 0 ) )
2004-08-03 06:31:20 +00:00
ast_log ( LOG_WARNING , " Whoa, failed to remove the extension! \n " ) ;
METERMAIDS:
-----------
- Adding devicestate providers, a new architecture to add non-channel related
device state information, like parking lots, queues, meetmes, vending machines
and Windows 98 reboots (lots of blinking on those lights)
- Adding provider for parking lots, so you can subscribe to the status of a
parking lot
- Adding provider for meetme, so you can have a blinking lamp for a meetme
( Example: exten => edvina,hint,meetme:1234 )
- Adding support for directed parking - set the PARKINGEXTEN before you manually
call Park() and you will be parked on that space. If it's occupied, dialplan
execution will continue.
This work was sponsored by Voop A/S - www.voop.com
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@36055 65c4cc65-6c06-0410-ace0-fbb531ad65f3
2006-06-26 16:43:21 +00:00
else
2008-04-21 23:42:45 +00:00
notify_metermaids ( pu - > parkingexten , parkinglot - > parking_con , AST_DEVICE_NOT_INUSE ) ;
2004-08-03 06:31:20 +00:00
} else
ast_log ( LOG_WARNING , " Whoa, no parking context? \n " ) ;
2005-02-26 07:54:28 +00:00
manager_event ( EVENT_FLAG_CALL , " UnParkedCall " ,
METERMAIDS:
-----------
- Adding devicestate providers, a new architecture to add non-channel related
device state information, like parking lots, queues, meetmes, vending machines
and Windows 98 reboots (lots of blinking on those lights)
- Adding provider for parking lots, so you can subscribe to the status of a
parking lot
- Adding provider for meetme, so you can have a blinking lamp for a meetme
( Example: exten => edvina,hint,meetme:1234 )
- Adding support for directed parking - set the PARKINGEXTEN before you manually
call Park() and you will be parked on that space. If it's occupied, dialplan
execution will continue.
This work was sponsored by Voop A/S - www.voop.com
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@36055 65c4cc65-6c06-0410-ace0-fbb531ad65f3
2006-06-26 16:43:21 +00:00
" Exten: %s \r \n "
2005-02-26 07:54:28 +00:00
" Channel: %s \r \n "
" From: %s \r \n "
2006-10-02 20:35:16 +00:00
" CallerIDNum: %s \r \n "
2006-04-21 10:47:07 +00:00
" CallerIDName: %s \r \n " ,
METERMAIDS:
-----------
- Adding devicestate providers, a new architecture to add non-channel related
device state information, like parking lots, queues, meetmes, vending machines
and Windows 98 reboots (lots of blinking on those lights)
- Adding provider for parking lots, so you can subscribe to the status of a
parking lot
- Adding provider for meetme, so you can have a blinking lamp for a meetme
( Example: exten => edvina,hint,meetme:1234 )
- Adding support for directed parking - set the PARKINGEXTEN before you manually
call Park() and you will be parked on that space. If it's occupied, dialplan
execution will continue.
This work was sponsored by Voop A/S - www.voop.com
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@36055 65c4cc65-6c06-0410-ace0-fbb531ad65f3
2006-06-26 16:43:21 +00:00
pu - > parkingexten , pu - > chan - > name , chan - > name ,
2006-04-21 10:47:07 +00:00
S_OR ( pu - > chan - > cid . cid_num , " <unknown> " ) ,
S_OR ( pu - > chan - > cid . cid_name , " <unknown> " )
2005-02-26 07:54:28 +00:00
) ;
2007-06-06 21:20:11 +00:00
ast_free ( pu ) ;
2001-12-27 11:07:33 +00:00
}
2003-02-02 19:37:23 +00:00
/* JK02: it helps to answer the channel if not already up */
2006-04-16 20:32:14 +00:00
if ( chan - > _state ! = AST_STATE_UP )
2003-02-02 19:37:23 +00:00
ast_answer ( chan ) ;
2008-04-21 23:42:45 +00:00
//XXX Why do we unlock here ?
// uncomment it for now, till my setup with debug_threads and detect_deadlocks starts to complain
//ASTOBJ_UNLOCK(parkinglot);
2001-12-27 11:07:33 +00:00
if ( peer ) {
2006-01-08 00:25:31 +00:00
/* Play a courtesy to the source(s) configured to prefix the bridge connecting */
2004-08-31 13:32:11 +00:00
if ( ! ast_strlen_zero ( courtesytone ) ) {
2006-04-16 20:32:14 +00:00
int error = 0 ;
ast_indicate ( peer , AST_CONTROL_UNHOLD ) ;
2006-01-08 00:25:31 +00:00
if ( parkedplay = = 0 ) {
2006-11-17 23:18:51 +00:00
error = ast_stream_and_wait ( chan , courtesytone , " " ) ;
2006-04-16 21:41:06 +00:00
} else if ( parkedplay = = 1 ) {
2006-11-17 23:18:51 +00:00
error = ast_stream_and_wait ( peer , courtesytone , " " ) ;
2006-04-16 20:32:14 +00:00
} else if ( parkedplay = = 2 ) {
if ( ! ast_streamfile ( chan , courtesytone , chan - > language ) & &
! ast_streamfile ( peer , courtesytone , chan - > language ) ) {
2006-04-17 04:31:21 +00:00
/*! \todo XXX we would like to wait on both! */
2006-04-16 20:32:14 +00:00
res = ast_waitstream ( chan , " " ) ;
if ( res > = 0 )
res = ast_waitstream ( peer , " " ) ;
if ( res < 0 )
error = 1 ;
2004-08-31 13:32:11 +00:00
}
2008-03-04 23:04:29 +00:00
}
2006-04-16 20:32:14 +00:00
if ( error ) {
ast_log ( LOG_WARNING , " Failed to play courtesy tone! \n " ) ;
ast_hangup ( peer ) ;
return - 1 ;
2004-08-31 13:32:11 +00:00
}
2006-07-19 20:44:39 +00:00
} else
2006-05-03 21:39:24 +00:00
ast_indicate ( peer , AST_CONTROL_UNHOLD ) ;
2001-12-27 11:07:33 +00:00
res = ast_channel_make_compatible ( chan , peer ) ;
if ( res < 0 ) {
ast_log ( LOG_WARNING , " Could not make channels %s and %s compatible for bridge \n " , chan - > name , peer - > name ) ;
ast_hangup ( peer ) ;
return - 1 ;
}
/* This runs sorta backwards, since we give the incoming channel control, as if it
were the person called . */
2007-07-26 15:49:18 +00:00
ast_verb ( 3 , " Channel %s connected to parked call %d \n " , chan - > name , park ) ;
2004-04-26 23:22:34 +00:00
2007-03-30 14:37:21 +00:00
pbx_builtin_setvar_helper ( chan , " PARKEDCHANNEL " , peer - > name ) ;
ast_cdr_setdestchan ( chan - > cdr , peer - > name ) ;
2005-07-25 17:31:53 +00:00
memset ( & config , 0 , sizeof ( struct ast_bridge_config ) ) ;
2008-04-21 23:42:45 +00:00
if ( ( parkinglot - > parkedcalltransfers = = AST_FEATURE_FLAG_BYCALLEE ) | | ( parkinglot - > parkedcalltransfers = = AST_FEATURE_FLAG_BYBOTH ) )
2007-01-16 17:50:25 +00:00
ast_set_flag ( & ( config . features_callee ) , AST_FEATURE_REDIRECT ) ;
2008-04-21 23:42:45 +00:00
if ( ( parkinglot - > parkedcalltransfers = = AST_FEATURE_FLAG_BYCALLER ) | | ( parkinglot - > parkedcalltransfers = = AST_FEATURE_FLAG_BYBOTH ) )
2007-01-16 17:50:25 +00:00
ast_set_flag ( & ( config . features_caller ) , AST_FEATURE_REDIRECT ) ;
2008-04-21 23:42:45 +00:00
if ( ( parkinglot - > parkedcallreparking = = AST_FEATURE_FLAG_BYCALLEE ) | | ( parkinglot - > parkedcallreparking = = AST_FEATURE_FLAG_BYBOTH ) )
2007-02-16 17:41:27 +00:00
ast_set_flag ( & ( config . features_callee ) , AST_FEATURE_PARKCALL ) ;
2008-04-21 23:42:45 +00:00
if ( ( parkinglot - > parkedcallreparking = = AST_FEATURE_FLAG_BYCALLER ) | | ( parkinglot - > parkedcallreparking = = AST_FEATURE_FLAG_BYBOTH ) )
2007-02-16 17:41:27 +00:00
ast_set_flag ( & ( config . features_caller ) , AST_FEATURE_PARKCALL ) ;
2005-07-25 17:31:53 +00:00
res = ast_bridge_call ( chan , peer , & config ) ;
2004-04-26 23:22:34 +00:00
2007-01-23 20:36:08 +00:00
pbx_builtin_setvar_helper ( chan , " PARKEDCHANNEL " , peer - > name ) ;
ast_cdr_setdestchan ( chan - > cdr , peer - > name ) ;
2001-12-27 11:07:33 +00:00
/* Simulate the PBX hanging up */
2004-04-07 04:11:00 +00:00
if ( res ! = AST_PBX_NO_HANGUP_PEER )
2001-12-27 11:07:33 +00:00
ast_hangup ( peer ) ;
2004-04-07 04:11:00 +00:00
return res ;
2001-12-27 11:07:33 +00:00
} else {
2006-04-17 04:31:21 +00:00
/*! \todo XXX Play a message XXX */
2006-11-17 23:18:51 +00:00
if ( ast_stream_and_wait ( chan , " pbx-invalidpark " , " " ) )
2004-12-28 23:49:46 +00:00
ast_log ( LOG_WARNING , " ast_streamfile of %s failed on %s \n " , " pbx-invalidpark " , chan - > name ) ;
2007-07-26 15:49:18 +00:00
ast_verb ( 3 , " Channel %s tried to talk to nonexistent parked call %d \n " , chan - > name , park ) ;
2001-12-27 11:07:33 +00:00
res = - 1 ;
}
2006-08-21 02:11:39 +00:00
2001-12-27 11:07:33 +00:00
return res ;
}
2008-04-21 23:42:45 +00:00
static int park_exec ( struct ast_channel * chan , void * data )
{
return park_exec_full ( chan , data , default_parkinglot ) ;
}
/*! \brief Unreference parkinglot object. If no more references,
then go ahead and delete it */
static void parkinglot_unref ( struct ast_parkinglot * parkinglot )
{
int refcount = ao2_ref ( parkinglot , - 1 ) ;
if ( option_debug > 2 )
ast_log ( LOG_DEBUG , " Multiparking: %s refcount now %d \n " , parkinglot - > name , refcount - 1 ) ;
}
static struct ast_parkinglot * parkinglot_addref ( struct ast_parkinglot * parkinglot )
{
int refcount = ao2_ref ( parkinglot , + 1 ) ;
if ( option_debug > 2 )
ast_log ( LOG_DEBUG , " Multiparking: %s refcount now %d \n " , parkinglot - > name , refcount + 1 ) ;
return parkinglot ;
}
/*! \brief Allocate parking lot structure */
static struct ast_parkinglot * create_parkinglot ( char * name )
{
struct ast_parkinglot * newlot = ( struct ast_parkinglot * ) NULL ;
if ( ! name )
return NULL ;
newlot = ao2_alloc ( sizeof ( * newlot ) , parkinglot_destroy ) ;
if ( ! newlot )
return NULL ;
ast_copy_string ( newlot - > name , name , sizeof ( newlot - > name ) ) ;
return newlot ;
}
/*! \brief Destroy a parking lot */
static void parkinglot_destroy ( void * obj )
{
struct ast_parkinglot * ruin = obj ;
struct ast_context * con ;
con = ast_context_find ( ruin - > parking_con ) ;
if ( con )
ast_context_destroy ( con , registrar ) ;
ao2_unlink ( parkinglots , ruin ) ;
}
/*! \brief Build parkinglot from configuration and chain it in */
static struct ast_parkinglot * build_parkinglot ( char * name , struct ast_variable * var )
{
struct ast_parkinglot * parkinglot ;
struct ast_context * con = NULL ;
struct ast_variable * confvar = var ;
int error = 0 ;
int start = 0 , end = 0 ;
int oldparkinglot = 0 ;
parkinglot = find_parkinglot ( name ) ;
if ( parkinglot )
oldparkinglot = 1 ;
else
parkinglot = create_parkinglot ( name ) ;
if ( ! parkinglot )
return NULL ;
ao2_lock ( parkinglot ) ;
if ( option_debug )
ast_log ( LOG_DEBUG , " Building parking lot %s \n " , name ) ;
/* Do some config stuff */
while ( confvar ) {
if ( ! strcasecmp ( confvar - > name , " context " ) ) {
ast_copy_string ( parkinglot - > parking_con , confvar - > value , sizeof ( parkinglot - > parking_con ) ) ;
} else if ( ! strcasecmp ( confvar - > name , " parkingtime " ) ) {
if ( ( sscanf ( confvar - > value , " %d " , & parkinglot - > parkingtime ) ! = 1 ) | | ( parkinglot - > parkingtime < 1 ) ) {
ast_log ( LOG_WARNING , " %s is not a valid parkingtime \n " , confvar - > value ) ;
parkinglot - > parkingtime = DEFAULT_PARK_TIME ;
} else
parkinglot - > parkingtime = parkinglot - > parkingtime * 1000 ;
} else if ( ! strcasecmp ( confvar - > name , " parkpos " ) ) {
if ( sscanf ( confvar - > value , " %d-%d " , & start , & end ) ! = 2 ) {
ast_log ( LOG_WARNING , " Format for parking positions is a-b, where a and b are numbers at line %d of parking.conf \n " , confvar - > lineno ) ;
error = 1 ;
} else {
parkinglot - > parking_start = start ;
parkinglot - > parking_stop = end ;
}
} else if ( ! strcasecmp ( confvar - > name , " findslot " ) ) {
parkinglot - > parkfindnext = ( ! strcasecmp ( confvar - > value , " next " ) ) ;
}
confvar = confvar - > next ;
}
/* make sure parkingtime is set if not specified */
if ( parkinglot - > parkingtime = = 0 ) {
parkinglot - > parkingtime = DEFAULT_PARK_TIME ;
}
if ( ! var ) { /* Default parking lot */
ast_copy_string ( parkinglot - > parking_con , " parkedcalls " , sizeof ( parkinglot - > parking_con ) ) ;
ast_copy_string ( parkinglot - > parking_con_dial , " park-dial " , sizeof ( parkinglot - > parking_con_dial ) ) ;
ast_copy_string ( parkinglot - > mohclass , " default " , sizeof ( parkinglot - > mohclass ) ) ;
}
/* Check for errors */
if ( ast_strlen_zero ( parkinglot - > parking_con ) ) {
ast_log ( LOG_WARNING , " Parking lot %s lacks context \n " , name ) ;
error = 1 ;
}
/* Create context */
if ( ! error & & ! ( con = ast_context_find_or_create ( NULL , NULL , parkinglot - > parking_con , registrar ) ) ) {
ast_log ( LOG_ERROR , " Parking context '%s' does not exist and unable to create \n " , parkinglot - > parking_con ) ;
error = 1 ;
}
/* Add a parking extension into the context */
if ( ! oldparkinglot ) {
(closes issue #13202)
Reported by: falves11
Tested by: murf
falves11 ==
The changes I introduce here seem to clear up the problem
for me. However, if they do not for you, please reopen this
bug, and we'll keep digging.
The root of this problem seems to be a subtle memory corruption
introduced when creating an extension with an empty extension
name. While valgrind cannot detect it outside of DEBUG_MALLOC
mode, when compiled with DEBUG_MALLOC, this is certain death.
The code in main/features.c is a puzzle to me. On the initial
module load, the code is attempting to add the parking extension
before the features.conf file has even been opened!
I just wrapped the offending call with an if() that will not
try to add the extension if the extension name is empty. THis
seems to solve the corruption, and let the "memory show allocations"
work as one would expect.
But, really, adding an extension with an empty name is a seriously
bad thing to allow, as it will mess up all the pattern matching
algorithms, etc. So, I added a statement to the add_extension2 code to return
a -1 if this is attempted.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@135265 65c4cc65-6c06-0410-ace0-fbb531ad65f3
2008-08-02 04:51:29 +00:00
if ( ! ast_strlen_zero ( ast_parking_ext ( ) ) ) {
if ( ast_add_extension2 ( con , 1 , ast_parking_ext ( ) , 1 , NULL , NULL , parkcall , strdup ( " " ) , ast_free , registrar ) = = - 1 )
error = 1 ;
}
2008-04-21 23:42:45 +00:00
}
ao2_unlock ( parkinglot ) ;
if ( error ) {
ast_log ( LOG_WARNING , " Parking %s not open for business. Configuration error. \n " , name ) ;
parkinglot_destroy ( parkinglot ) ;
return NULL ;
}
if ( option_debug )
ast_log ( LOG_DEBUG , " Parking %s now open for business. (start exten %d end %d) \n " , name , start , end ) ;
/* Move it into the list, if it wasn't already there */
if ( ! oldparkinglot ) {
ao2_link ( parkinglots , parkinglot ) ;
}
parkinglot_unref ( parkinglot ) ;
return parkinglot ;
}
2008-01-23 23:09:11 +00:00
/*!
* \ brief Add parking hints for all defined parking lots
* \ param context
* \ param start starting parkinglot number
* \ param stop ending parkinglot number
2007-08-07 23:04:01 +00:00
*/
2008-01-23 23:09:11 +00:00
static void park_add_hints ( char * context , int start , int stop )
Merge changes from team/russell/issue_5841:
This patch adds a "Bridge" Manager action, as well as a "Bridge" dialplan
application. The manager action will allow you to steal two active channels
in the system and bridge them together. Then, the one that did not hang up
will continue in the dialplan. Using the application will bridge the calling
channel to an arbitrary channel in the system. Whichever channel does not
hang up here will continue in the dialplan, as well.
This patch has been touched by a bunch of people over the course of a couple
years. Please forgive me if I have missed your name in the history of things.
The most recent patch came from issue #5841, but there is also a reference to
an earlier version of this patch from issue #4297. The people involved in writing
and/or reviewing the code include at least: twisted, mflorrel, heath1444, davetroy,
tim_ringenbach, moy, tmancill, serge-v, and me. There are also positive test
reports from many people.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@61281 65c4cc65-6c06-0410-ace0-fbb531ad65f3
2007-04-10 20:44:44 +00:00
{
2008-01-23 23:09:11 +00:00
int numext ;
char device [ AST_MAX_EXTENSION ] ;
char exten [ 10 ] ;
Merge changes from team/russell/issue_5841:
This patch adds a "Bridge" Manager action, as well as a "Bridge" dialplan
application. The manager action will allow you to steal two active channels
in the system and bridge them together. Then, the one that did not hang up
will continue in the dialplan. Using the application will bridge the calling
channel to an arbitrary channel in the system. Whichever channel does not
hang up here will continue in the dialplan, as well.
This patch has been touched by a bunch of people over the course of a couple
years. Please forgive me if I have missed your name in the history of things.
The most recent patch came from issue #5841, but there is also a reference to
an earlier version of this patch from issue #4297. The people involved in writing
and/or reviewing the code include at least: twisted, mflorrel, heath1444, davetroy,
tim_ringenbach, moy, tmancill, serge-v, and me. There are also positive test
reports from many people.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@61281 65c4cc65-6c06-0410-ace0-fbb531ad65f3
2007-04-10 20:44:44 +00:00
2008-01-23 23:09:11 +00:00
for ( numext = start ; numext < = stop ; numext + + ) {
snprintf ( exten , sizeof ( exten ) , " %d " , numext ) ;
snprintf ( device , sizeof ( device ) , " park:%s@%s " , exten , context ) ;
ast_add_extension ( context , 1 , exten , PRIORITY_HINT , NULL , NULL , device , NULL , NULL , registrar ) ;
Merge changes from team/russell/issue_5841:
This patch adds a "Bridge" Manager action, as well as a "Bridge" dialplan
application. The manager action will allow you to steal two active channels
in the system and bridge them together. Then, the one that did not hang up
will continue in the dialplan. Using the application will bridge the calling
channel to an arbitrary channel in the system. Whichever channel does not
hang up here will continue in the dialplan, as well.
This patch has been touched by a bunch of people over the course of a couple
years. Please forgive me if I have missed your name in the history of things.
The most recent patch came from issue #5841, but there is also a reference to
an earlier version of this patch from issue #4297. The people involved in writing
and/or reviewing the code include at least: twisted, mflorrel, heath1444, davetroy,
tim_ringenbach, moy, tmancill, serge-v, and me. There are also positive test
reports from many people.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@61281 65c4cc65-6c06-0410-ace0-fbb531ad65f3
2007-04-10 20:44:44 +00:00
}
2008-01-23 23:09:11 +00:00
}
Merge changes from team/russell/issue_5841:
This patch adds a "Bridge" Manager action, as well as a "Bridge" dialplan
application. The manager action will allow you to steal two active channels
in the system and bridge them together. Then, the one that did not hang up
will continue in the dialplan. Using the application will bridge the calling
channel to an arbitrary channel in the system. Whichever channel does not
hang up here will continue in the dialplan, as well.
This patch has been touched by a bunch of people over the course of a couple
years. Please forgive me if I have missed your name in the history of things.
The most recent patch came from issue #5841, but there is also a reference to
an earlier version of this patch from issue #4297. The people involved in writing
and/or reviewing the code include at least: twisted, mflorrel, heath1444, davetroy,
tim_ringenbach, moy, tmancill, serge-v, and me. There are also positive test
reports from many people.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@61281 65c4cc65-6c06-0410-ace0-fbb531ad65f3
2007-04-10 20:44:44 +00:00
2008-01-23 23:09:11 +00:00
static int load_config ( void )
{
int start = 0 , end = 0 ;
int res ;
int i ;
struct ast_context * con = NULL ;
struct ast_config * cfg = NULL ;
struct ast_variable * var = NULL ;
struct feature_group * fg = NULL ;
struct ast_flags config_flags = { 0 } ;
char old_parking_ext [ AST_MAX_EXTENSION ] ;
char old_parking_con [ AST_MAX_EXTENSION ] = " " ;
char * ctg ;
static const char * categories [ ] = {
/* Categories in features.conf that are not
* to be parsed as group categories
*/
" general " ,
" featuremap " ,
" applicationmap "
} ;
Merge changes from team/russell/issue_5841:
This patch adds a "Bridge" Manager action, as well as a "Bridge" dialplan
application. The manager action will allow you to steal two active channels
in the system and bridge them together. Then, the one that did not hang up
will continue in the dialplan. Using the application will bridge the calling
channel to an arbitrary channel in the system. Whichever channel does not
hang up here will continue in the dialplan, as well.
This patch has been touched by a bunch of people over the course of a couple
years. Please forgive me if I have missed your name in the history of things.
The most recent patch came from issue #5841, but there is also a reference to
an earlier version of this patch from issue #4297. The people involved in writing
and/or reviewing the code include at least: twisted, mflorrel, heath1444, davetroy,
tim_ringenbach, moy, tmancill, serge-v, and me. There are also positive test
reports from many people.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@61281 65c4cc65-6c06-0410-ace0-fbb531ad65f3
2007-04-10 20:44:44 +00:00
2008-04-21 23:42:45 +00:00
if ( default_parkinglot ) {
strcpy ( old_parking_con , default_parkinglot - > parking_con ) ;
2008-01-23 23:09:11 +00:00
strcpy ( old_parking_ext , parking_ext ) ;
2008-04-21 23:42:45 +00:00
} else {
default_parkinglot = build_parkinglot ( DEFAULT_PARKINGLOT , NULL ) ;
if ( default_parkinglot ) {
ao2_lock ( default_parkinglot ) ;
default_parkinglot - > parking_start = 701 ;
default_parkinglot - > parking_stop = 750 ;
default_parkinglot - > parking_offset = 0 ;
default_parkinglot - > parkfindnext = 0 ;
2008-06-11 21:38:40 +00:00
default_parkinglot - > parkingtime = DEFAULT_PARK_TIME ;
2008-04-21 23:42:45 +00:00
ao2_unlock ( default_parkinglot ) ;
}
}
if ( default_parkinglot ) {
if ( option_debug )
ast_log ( LOG_DEBUG , " Configuration of default parkinglot done. \n " ) ;
} else {
ast_log ( LOG_ERROR , " Configuration of default parkinglot failed. \n " ) ;
return - 1 ;
}
Merge changes from team/russell/issue_5841:
This patch adds a "Bridge" Manager action, as well as a "Bridge" dialplan
application. The manager action will allow you to steal two active channels
in the system and bridge them together. Then, the one that did not hang up
will continue in the dialplan. Using the application will bridge the calling
channel to an arbitrary channel in the system. Whichever channel does not
hang up here will continue in the dialplan, as well.
This patch has been touched by a bunch of people over the course of a couple
years. Please forgive me if I have missed your name in the history of things.
The most recent patch came from issue #5841, but there is also a reference to
an earlier version of this patch from issue #4297. The people involved in writing
and/or reviewing the code include at least: twisted, mflorrel, heath1444, davetroy,
tim_ringenbach, moy, tmancill, serge-v, and me. There are also positive test
reports from many people.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@61281 65c4cc65-6c06-0410-ace0-fbb531ad65f3
2007-04-10 20:44:44 +00:00
2008-01-23 23:09:11 +00:00
/* Reset to defaults */
strcpy ( parking_ext , " 700 " ) ;
strcpy ( pickup_ext , " *8 " ) ;
courtesytone [ 0 ] = ' \0 ' ;
strcpy ( xfersound , " beep " ) ;
strcpy ( xferfailsound , " pbx-invalid " ) ;
adsipark = 0 ;
comebacktoorigin = 1 ;
2008-04-21 23:42:45 +00:00
default_parkinglot - > parkaddhints = 0 ;
default_parkinglot - > parkedcalltransfers = 0 ;
default_parkinglot - > parkedcallreparking = 0 ;
Merge changes from team/russell/issue_5841:
This patch adds a "Bridge" Manager action, as well as a "Bridge" dialplan
application. The manager action will allow you to steal two active channels
in the system and bridge them together. Then, the one that did not hang up
will continue in the dialplan. Using the application will bridge the calling
channel to an arbitrary channel in the system. Whichever channel does not
hang up here will continue in the dialplan, as well.
This patch has been touched by a bunch of people over the course of a couple
years. Please forgive me if I have missed your name in the history of things.
The most recent patch came from issue #5841, but there is also a reference to
an earlier version of this patch from issue #4297. The people involved in writing
and/or reviewing the code include at least: twisted, mflorrel, heath1444, davetroy,
tim_ringenbach, moy, tmancill, serge-v, and me. There are also positive test
reports from many people.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@61281 65c4cc65-6c06-0410-ace0-fbb531ad65f3
2007-04-10 20:44:44 +00:00
2008-01-23 23:09:11 +00:00
transferdigittimeout = DEFAULT_TRANSFER_DIGIT_TIMEOUT ;
featuredigittimeout = DEFAULT_FEATURE_DIGIT_TIMEOUT ;
atxfernoanswertimeout = DEFAULT_NOANSWER_TIMEOUT_ATTENDED_TRANSFER ;
atxferloopdelay = DEFAULT_ATXFER_LOOP_DELAY ;
atxferdropcall = DEFAULT_ATXFER_DROP_CALL ;
atxfercallbackretries = DEFAULT_ATXFER_CALLBACK_RETRIES ;
Merge changes from team/russell/issue_5841:
This patch adds a "Bridge" Manager action, as well as a "Bridge" dialplan
application. The manager action will allow you to steal two active channels
in the system and bridge them together. Then, the one that did not hang up
will continue in the dialplan. Using the application will bridge the calling
channel to an arbitrary channel in the system. Whichever channel does not
hang up here will continue in the dialplan, as well.
This patch has been touched by a bunch of people over the course of a couple
years. Please forgive me if I have missed your name in the history of things.
The most recent patch came from issue #5841, but there is also a reference to
an earlier version of this patch from issue #4297. The people involved in writing
and/or reviewing the code include at least: twisted, mflorrel, heath1444, davetroy,
tim_ringenbach, moy, tmancill, serge-v, and me. There are also positive test
reports from many people.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@61281 65c4cc65-6c06-0410-ace0-fbb531ad65f3
2007-04-10 20:44:44 +00:00
2008-03-26 18:39:06 +00:00
cfg = ast_config_load2 ( " features.conf " , " features " , config_flags ) ;
2008-09-12 23:30:03 +00:00
if ( cfg = = CONFIG_STATUS_FILEMISSING | | cfg = = CONFIG_STATUS_FILEUNCHANGED | | cfg = = CONFIG_STATUS_FILEINVALID ) {
2008-01-23 23:09:11 +00:00
ast_log ( LOG_WARNING , " Could not load features.conf \n " ) ;
return 0 ;
Merge changes from team/russell/issue_5841:
This patch adds a "Bridge" Manager action, as well as a "Bridge" dialplan
application. The manager action will allow you to steal two active channels
in the system and bridge them together. Then, the one that did not hang up
will continue in the dialplan. Using the application will bridge the calling
channel to an arbitrary channel in the system. Whichever channel does not
hang up here will continue in the dialplan, as well.
This patch has been touched by a bunch of people over the course of a couple
years. Please forgive me if I have missed your name in the history of things.
The most recent patch came from issue #5841, but there is also a reference to
an earlier version of this patch from issue #4297. The people involved in writing
and/or reviewing the code include at least: twisted, mflorrel, heath1444, davetroy,
tim_ringenbach, moy, tmancill, serge-v, and me. There are also positive test
reports from many people.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@61281 65c4cc65-6c06-0410-ace0-fbb531ad65f3
2007-04-10 20:44:44 +00:00
}
2008-01-23 23:09:11 +00:00
for ( var = ast_variable_browse ( cfg , " general " ) ; var ; var = var - > next ) {
if ( ! strcasecmp ( var - > name , " parkext " ) ) {
ast_copy_string ( parking_ext , var - > value , sizeof ( parking_ext ) ) ;
} else if ( ! strcasecmp ( var - > name , " context " ) ) {
2008-04-21 23:42:45 +00:00
ast_copy_string ( default_parkinglot - > parking_con , var - > value , sizeof ( default_parkinglot - > parking_con ) ) ;
2008-01-23 23:09:11 +00:00
} else if ( ! strcasecmp ( var - > name , " parkingtime " ) ) {
2008-04-21 23:42:45 +00:00
if ( ( sscanf ( var - > value , " %d " , & default_parkinglot - > parkingtime ) ! = 1 ) | | ( default_parkinglot - > parkingtime < 1 ) ) {
2008-01-23 23:09:11 +00:00
ast_log ( LOG_WARNING , " %s is not a valid parkingtime \n " , var - > value ) ;
2008-04-21 23:42:45 +00:00
default_parkinglot - > parkingtime = DEFAULT_PARK_TIME ;
2008-01-23 23:09:11 +00:00
} else
2008-04-21 23:42:45 +00:00
default_parkinglot - > parkingtime = default_parkinglot - > parkingtime * 1000 ;
2008-01-23 23:09:11 +00:00
} else if ( ! strcasecmp ( var - > name , " parkpos " ) ) {
if ( sscanf ( var - > value , " %d-%d " , & start , & end ) ! = 2 ) {
ast_log ( LOG_WARNING , " Format for parking positions is a-b, where a and b are numbers at line %d of features.conf \n " , var - > lineno ) ;
2008-04-21 23:42:45 +00:00
} else if ( default_parkinglot ) {
default_parkinglot - > parking_start = start ;
default_parkinglot - > parking_stop = end ;
2008-01-23 23:09:11 +00:00
} else {
2008-04-21 23:42:45 +00:00
ast_log ( LOG_WARNING , " No default parking lot! \n " ) ;
2008-01-23 23:09:11 +00:00
}
} else if ( ! strcasecmp ( var - > name , " findslot " ) ) {
2008-04-21 23:42:45 +00:00
default_parkinglot - > parkfindnext = ( ! strcasecmp ( var - > value , " next " ) ) ;
2008-01-23 23:09:11 +00:00
} else if ( ! strcasecmp ( var - > name , " parkinghints " ) ) {
2008-04-21 23:42:45 +00:00
default_parkinglot - > parkaddhints = ast_true ( var - > value ) ;
2008-01-23 23:09:11 +00:00
} else if ( ! strcasecmp ( var - > name , " parkedcalltransfers " ) ) {
if ( ! strcasecmp ( var - > value , " both " ) )
2008-04-21 23:42:45 +00:00
default_parkinglot - > parkedcalltransfers = AST_FEATURE_FLAG_BYBOTH ;
2008-01-23 23:09:11 +00:00
else if ( ! strcasecmp ( var - > value , " caller " ) )
2008-04-21 23:42:45 +00:00
default_parkinglot - > parkedcalltransfers = AST_FEATURE_FLAG_BYCALLER ;
2008-01-23 23:09:11 +00:00
else if ( ! strcasecmp ( var - > value , " callee " ) )
2008-04-21 23:42:45 +00:00
default_parkinglot - > parkedcalltransfers = AST_FEATURE_FLAG_BYCALLEE ;
2008-01-23 23:09:11 +00:00
} else if ( ! strcasecmp ( var - > name , " parkedcallreparking " ) ) {
if ( ! strcasecmp ( var - > value , " both " ) )
2008-04-21 23:42:45 +00:00
default_parkinglot - > parkedcallreparking = AST_FEATURE_FLAG_BYBOTH ;
2008-01-23 23:09:11 +00:00
else if ( ! strcasecmp ( var - > value , " caller " ) )
2008-04-21 23:42:45 +00:00
default_parkinglot - > parkedcallreparking = AST_FEATURE_FLAG_BYCALLER ;
2008-01-23 23:09:11 +00:00
else if ( ! strcasecmp ( var - > value , " callee " ) )
2008-04-21 23:42:45 +00:00
default_parkinglot - > parkedcallreparking = AST_FEATURE_FLAG_BYCALLEE ;
2008-01-23 23:09:11 +00:00
} else if ( ! strcasecmp ( var - > name , " adsipark " ) ) {
adsipark = ast_true ( var - > value ) ;
} else if ( ! strcasecmp ( var - > name , " transferdigittimeout " ) ) {
if ( ( sscanf ( var - > value , " %d " , & transferdigittimeout ) ! = 1 ) | | ( transferdigittimeout < 1 ) ) {
ast_log ( LOG_WARNING , " %s is not a valid transferdigittimeout \n " , var - > value ) ;
transferdigittimeout = DEFAULT_TRANSFER_DIGIT_TIMEOUT ;
} else
transferdigittimeout = transferdigittimeout * 1000 ;
} else if ( ! strcasecmp ( var - > name , " featuredigittimeout " ) ) {
if ( ( sscanf ( var - > value , " %d " , & featuredigittimeout ) ! = 1 ) | | ( featuredigittimeout < 1 ) ) {
ast_log ( LOG_WARNING , " %s is not a valid featuredigittimeout \n " , var - > value ) ;
featuredigittimeout = DEFAULT_FEATURE_DIGIT_TIMEOUT ;
}
} else if ( ! strcasecmp ( var - > name , " atxfernoanswertimeout " ) ) {
if ( ( sscanf ( var - > value , " %d " , & atxfernoanswertimeout ) ! = 1 ) | | ( atxfernoanswertimeout < 1 ) ) {
ast_log ( LOG_WARNING , " %s is not a valid atxfernoanswertimeout \n " , var - > value ) ;
atxfernoanswertimeout = DEFAULT_NOANSWER_TIMEOUT_ATTENDED_TRANSFER ;
} else
atxfernoanswertimeout = atxfernoanswertimeout * 1000 ;
} else if ( ! strcasecmp ( var - > name , " atxferloopdelay " ) ) {
if ( ( sscanf ( var - > value , " %u " , & atxferloopdelay ) ! = 1 ) ) {
ast_log ( LOG_WARNING , " %s is not a valid atxferloopdelay \n " , var - > value ) ;
atxferloopdelay = DEFAULT_ATXFER_LOOP_DELAY ;
} else
atxferloopdelay * = 1000 ;
} else if ( ! strcasecmp ( var - > name , " atxferdropcall " ) ) {
atxferdropcall = ast_true ( var - > value ) ;
} else if ( ! strcasecmp ( var - > name , " atxfercallbackretries " ) ) {
if ( ( sscanf ( var - > value , " %u " , & atxferloopdelay ) ! = 1 ) ) {
ast_log ( LOG_WARNING , " %s is not a valid atxfercallbackretries \n " , var - > value ) ;
atxfercallbackretries = DEFAULT_ATXFER_CALLBACK_RETRIES ;
}
} else if ( ! strcasecmp ( var - > name , " courtesytone " ) ) {
ast_copy_string ( courtesytone , var - > value , sizeof ( courtesytone ) ) ;
} else if ( ! strcasecmp ( var - > name , " parkedplay " ) ) {
if ( ! strcasecmp ( var - > value , " both " ) )
parkedplay = 2 ;
else if ( ! strcasecmp ( var - > value , " parked " ) )
parkedplay = 1 ;
else
parkedplay = 0 ;
} else if ( ! strcasecmp ( var - > name , " xfersound " ) ) {
ast_copy_string ( xfersound , var - > value , sizeof ( xfersound ) ) ;
} else if ( ! strcasecmp ( var - > name , " xferfailsound " ) ) {
ast_copy_string ( xferfailsound , var - > value , sizeof ( xferfailsound ) ) ;
} else if ( ! strcasecmp ( var - > name , " pickupexten " ) ) {
ast_copy_string ( pickup_ext , var - > value , sizeof ( pickup_ext ) ) ;
} else if ( ! strcasecmp ( var - > name , " comebacktoorigin " ) ) {
comebacktoorigin = ast_true ( var - > value ) ;
} else if ( ! strcasecmp ( var - > name , " parkedmusicclass " ) ) {
2008-04-21 23:42:45 +00:00
ast_copy_string ( default_parkinglot - > mohclass , var - > value , sizeof ( default_parkinglot - > mohclass ) ) ;
2008-01-23 23:09:11 +00:00
}
}
unmap_features ( ) ;
for ( var = ast_variable_browse ( cfg , " featuremap " ) ; var ; var = var - > next ) {
if ( remap_feature ( var - > name , var - > value ) )
ast_log ( LOG_NOTICE , " Unknown feature '%s' \n " , var - > name ) ;
}
/* Map a key combination to an application*/
ast_unregister_features ( ) ;
for ( var = ast_variable_browse ( cfg , " applicationmap " ) ; var ; var = var - > next ) {
char * tmp_val = ast_strdupa ( var - > value ) ;
char * exten , * activateon , * activatedby , * app , * app_args , * moh_class ;
struct ast_call_feature * feature ;
/* strsep() sets the argument to NULL if match not found, and it
* is safe to use it with a NULL argument , so we don ' t check
* between calls .
*/
exten = strsep ( & tmp_val , " , " ) ;
activatedby = strsep ( & tmp_val , " , " ) ;
app = strsep ( & tmp_val , " , " ) ;
app_args = strsep ( & tmp_val , " , " ) ;
moh_class = strsep ( & tmp_val , " , " ) ;
activateon = strsep ( & activatedby , " / " ) ;
/*! \todo XXX var_name or app_args ? */
if ( ast_strlen_zero ( app ) | | ast_strlen_zero ( exten ) | | ast_strlen_zero ( activateon ) | | ast_strlen_zero ( var - > name ) ) {
ast_log ( LOG_NOTICE , " Please check the feature Mapping Syntax, either extension, name, or app aren't provided %s %s %s %s \n " ,
app , exten , activateon , var - > name ) ;
continue ;
}
AST_LIST_LOCK ( & feature_list ) ;
if ( ( feature = find_dynamic_feature ( var - > name ) ) ) {
AST_LIST_UNLOCK ( & feature_list ) ;
ast_log ( LOG_WARNING , " Dynamic Feature '%s' specified more than once! \n " , var - > name ) ;
continue ;
}
AST_LIST_UNLOCK ( & feature_list ) ;
if ( ! ( feature = ast_calloc ( 1 , sizeof ( * feature ) ) ) )
continue ;
ast_copy_string ( feature - > sname , var - > name , FEATURE_SNAME_LEN ) ;
ast_copy_string ( feature - > app , app , FEATURE_APP_LEN ) ;
ast_copy_string ( feature - > exten , exten , FEATURE_EXTEN_LEN ) ;
if ( app_args )
ast_copy_string ( feature - > app_args , app_args , FEATURE_APP_ARGS_LEN ) ;
if ( moh_class )
ast_copy_string ( feature - > moh_class , moh_class , FEATURE_MOH_LEN ) ;
ast_copy_string ( feature - > exten , exten , sizeof ( feature - > exten ) ) ;
feature - > operation = feature_exec_app ;
ast_set_flag ( feature , AST_FEATURE_FLAG_NEEDSDTMF ) ;
/* Allow caller and calle to be specified for backwards compatability */
if ( ! strcasecmp ( activateon , " self " ) | | ! strcasecmp ( activateon , " caller " ) )
ast_set_flag ( feature , AST_FEATURE_FLAG_ONSELF ) ;
else if ( ! strcasecmp ( activateon , " peer " ) | | ! strcasecmp ( activateon , " callee " ) )
ast_set_flag ( feature , AST_FEATURE_FLAG_ONPEER ) ;
else {
ast_log ( LOG_NOTICE , " Invalid 'ActivateOn' specification for feature '%s', "
" must be 'self', or 'peer' \n " , var - > name ) ;
continue ;
}
if ( ast_strlen_zero ( activatedby ) )
ast_set_flag ( feature , AST_FEATURE_FLAG_BYBOTH ) ;
else if ( ! strcasecmp ( activatedby , " caller " ) )
ast_set_flag ( feature , AST_FEATURE_FLAG_BYCALLER ) ;
else if ( ! strcasecmp ( activatedby , " callee " ) )
ast_set_flag ( feature , AST_FEATURE_FLAG_BYCALLEE ) ;
else if ( ! strcasecmp ( activatedby , " both " ) )
ast_set_flag ( feature , AST_FEATURE_FLAG_BYBOTH ) ;
else {
ast_log ( LOG_NOTICE , " Invalid 'ActivatedBy' specification for feature '%s', "
" must be 'caller', or 'callee', or 'both' \n " , var - > name ) ;
continue ;
}
ast_register_feature ( feature ) ;
ast_verb ( 2 , " Mapping Feature '%s' to app '%s(%s)' with code '%s' \n " , var - > name , app , app_args , exten ) ;
}
ast_unregister_groups ( ) ;
AST_RWLIST_WRLOCK ( & feature_groups ) ;
ctg = NULL ;
while ( ( ctg = ast_category_browse ( cfg , ctg ) ) ) {
2008-04-21 23:42:45 +00:00
/* Is this a parkinglot definition ? */
if ( ! strncasecmp ( ctg , " parkinglot_ " , strlen ( " parkinglot_ " ) ) ) {
ast_debug ( 2 , " Found configuration section %s, assume parking context \n " , ctg ) ;
if ( ! build_parkinglot ( ctg , ast_variable_browse ( cfg , ctg ) ) )
ast_log ( LOG_ERROR , " Could not build parking lot %s. Configuration error. \n " , ctg ) ;
else
ast_debug ( 1 , " Configured parking context %s \n " , ctg ) ;
continue ;
}
/* No, check if it's a group */
2008-01-23 23:09:11 +00:00
for ( i = 0 ; i < ARRAY_LEN ( categories ) ; i + + ) {
if ( ! strcasecmp ( categories [ i ] , ctg ) )
break ;
}
if ( i < ARRAY_LEN ( categories ) )
continue ;
if ( ! ( fg = register_group ( ctg ) ) )
continue ;
for ( var = ast_variable_browse ( cfg , ctg ) ; var ; var = var - > next ) {
struct ast_call_feature * feature ;
AST_LIST_LOCK ( & feature_list ) ;
if ( ! ( feature = find_dynamic_feature ( var - > name ) ) & &
! ( feature = ast_find_call_feature ( var - > name ) ) ) {
AST_LIST_UNLOCK ( & feature_list ) ;
ast_log ( LOG_WARNING , " Feature '%s' was not found. \n " , var - > name ) ;
continue ;
}
AST_LIST_UNLOCK ( & feature_list ) ;
register_group_feature ( fg , var - > value , feature ) ;
}
}
AST_RWLIST_UNLOCK ( & feature_groups ) ;
ast_config_destroy ( cfg ) ;
/* Remove the old parking extension */
if ( ! ast_strlen_zero ( old_parking_con ) & & ( con = ast_context_find ( old_parking_con ) ) ) {
2008-06-16 20:43:46 +00:00
if ( ast_context_remove_extension2 ( con , old_parking_ext , 1 , registrar , 0 ) )
2008-01-23 23:09:11 +00:00
notify_metermaids ( old_parking_ext , old_parking_con , AST_DEVICE_NOT_INUSE ) ;
ast_debug ( 1 , " Removed old parking extension %s@%s \n " , old_parking_ext , old_parking_con ) ;
}
2008-04-21 23:42:45 +00:00
if ( ! ( con = ast_context_find_or_create ( NULL , NULL , default_parkinglot - > parking_con , registrar ) ) ) {
ast_log ( LOG_ERROR , " Parking context '%s' does not exist and unable to create \n " , default_parkinglot - > parking_con ) ;
2008-01-23 23:09:11 +00:00
return - 1 ;
}
res = ast_add_extension2 ( con , 1 , ast_parking_ext ( ) , 1 , NULL , NULL , parkcall , NULL , NULL , registrar ) ;
2008-04-21 23:42:45 +00:00
if ( default_parkinglot - > parkaddhints )
park_add_hints ( default_parkinglot - > parking_con , default_parkinglot - > parking_start , default_parkinglot - > parking_stop ) ;
2008-01-23 23:09:11 +00:00
if ( ! res )
2008-04-21 23:42:45 +00:00
notify_metermaids ( ast_parking_ext ( ) , default_parkinglot - > parking_con , AST_DEVICE_INUSE ) ;
2008-01-23 23:09:11 +00:00
return res ;
}
2007-08-07 23:04:01 +00:00
/*!
2008-01-23 23:09:11 +00:00
* \ brief CLI command to list configured features
* \ param e
2007-08-07 23:04:01 +00:00
* \ param cmd
* \ param a
2008-01-23 23:09:11 +00:00
*
2007-08-07 23:04:01 +00:00
* \ retval CLI_SUCCESS on success .
* \ retval NULL when tab completion is used .
2008-01-23 23:09:11 +00:00
*/
static char * handle_feature_show ( struct ast_cli_entry * e , int cmd , struct ast_cli_args * a )
2003-07-02 14:06:12 +00:00
{
2008-01-23 23:09:11 +00:00
int i ;
struct ast_call_feature * feature ;
2008-04-21 23:42:45 +00:00
struct ao2_iterator iter ;
struct ast_parkinglot * curlot ;
2008-03-18 15:43:34 +00:00
# define HFS_FORMAT "%-25s %-7s %-7s\n"
2003-07-02 14:06:12 +00:00
2007-06-06 14:45:29 +00:00
switch ( cmd ) {
2008-01-23 23:09:11 +00:00
2007-06-06 14:45:29 +00:00
case CLI_INIT :
2008-01-23 23:09:11 +00:00
e - > command = " features show " ;
2007-06-06 14:45:29 +00:00
e - > usage =
2008-01-23 23:09:11 +00:00
" Usage: features show \n "
" Lists configured features \n " ;
2007-06-06 14:45:29 +00:00
return NULL ;
case CLI_GENERATE :
return NULL ;
2008-03-04 23:04:29 +00:00
}
2007-06-06 14:45:29 +00:00
2008-03-18 15:43:34 +00:00
ast_cli ( a - > fd , HFS_FORMAT , " Builtin Feature " , " Default " , " Current " ) ;
ast_cli ( a - > fd , HFS_FORMAT , " --------------- " , " ------- " , " ------- " ) ;
2007-06-06 14:45:29 +00:00
2008-03-18 15:43:34 +00:00
ast_cli ( a - > fd , HFS_FORMAT , " Pickup " , " *8 " , ast_pickup_ext ( ) ) ; /* default hardcoded above, so we'll hardcode it here */
2003-07-02 14:06:12 +00:00
2008-01-23 23:09:11 +00:00
ast_rwlock_rdlock ( & features_lock ) ;
for ( i = 0 ; i < FEATURES_COUNT ; i + + )
2008-03-18 15:43:34 +00:00
ast_cli ( a - > fd , HFS_FORMAT , builtin_features [ i ] . fname , builtin_features [ i ] . default_exten , builtin_features [ i ] . exten ) ;
2008-01-23 23:09:11 +00:00
ast_rwlock_unlock ( & features_lock ) ;
2003-07-02 14:06:12 +00:00
2008-01-23 23:09:11 +00:00
ast_cli ( a - > fd , " \n " ) ;
2008-03-18 15:43:34 +00:00
ast_cli ( a - > fd , HFS_FORMAT , " Dynamic Feature " , " Default " , " Current " ) ;
ast_cli ( a - > fd , HFS_FORMAT , " --------------- " , " ------- " , " ------- " ) ;
2008-01-23 23:09:11 +00:00
if ( AST_LIST_EMPTY ( & feature_list ) )
ast_cli ( a - > fd , " (none) \n " ) ;
else {
AST_LIST_LOCK ( & feature_list ) ;
AST_LIST_TRAVERSE ( & feature_list , feature , feature_entry )
2008-03-18 15:43:34 +00:00
ast_cli ( a - > fd , HFS_FORMAT , feature - > sname , " no def " , feature - > exten ) ;
2008-01-23 23:09:11 +00:00
AST_LIST_UNLOCK ( & feature_list ) ;
2003-07-02 14:06:12 +00:00
}
2008-04-21 23:42:45 +00:00
// loop through all the parking lots
iter = ao2_iterator_init ( parkinglots , 0 ) ;
while ( ( curlot = ao2_iterator_next ( & iter ) ) ) {
ast_cli ( a - > fd , " \n Call parking (Parking lot: %s) \n " , curlot - > name ) ;
ast_cli ( a - > fd , " ------------ \n " ) ;
ast_cli ( a - > fd , " %-22s: %s \n " , " Parking extension " , parking_ext ) ;
ast_cli ( a - > fd , " %-22s: %s \n " , " Parking context " , curlot - > parking_con ) ;
ast_cli ( a - > fd , " %-22s: %d-%d \n " , " Parked call extensions " , curlot - > parking_start , curlot - > parking_stop ) ;
ast_cli ( a - > fd , " \n " ) ;
ao2_ref ( curlot , - 1 ) ;
}
2003-07-02 14:06:12 +00:00
2007-06-06 14:45:29 +00:00
return CLI_SUCCESS ;
}
2008-01-23 23:09:11 +00:00
int ast_features_reload ( void )
2007-06-06 14:45:29 +00:00
{
2008-04-21 23:42:45 +00:00
int res ;
/* Release parking lot list */
//ASTOBJ_CONTAINER_MARKALL(&parkinglots);
// TODO: I don't think any marking is necessary
2008-01-23 23:09:11 +00:00
2008-04-21 23:42:45 +00:00
/* Reload configuration */
res = load_config ( ) ;
//ASTOBJ_CONTAINER_PRUNE_MARKED(&parkinglots, parkinglot_destroy);
return res ;
2003-07-02 14:06:12 +00:00
}
2008-01-23 23:09:11 +00:00
static char * handle_features_reload ( struct ast_cli_entry * e , int cmd , struct ast_cli_args * a )
{
switch ( cmd ) {
case CLI_INIT :
e - > command = " features reload " ;
e - > usage =
" Usage: features reload \n "
" Reloads configured call features from features.conf \n " ;
return NULL ;
case CLI_GENERATE :
return NULL ;
2008-03-04 23:04:29 +00:00
}
2008-04-21 23:42:45 +00:00
ast_features_reload ( ) ;
2003-07-02 14:06:12 +00:00
2008-01-23 23:09:11 +00:00
return CLI_SUCCESS ;
}
2005-07-25 17:31:53 +00:00
2008-01-23 23:09:11 +00:00
static char mandescr_bridge [ ] =
" Description: Bridge together two channels already in the PBX \n "
" Variables: ( Headers marked with * are required ) \n "
" *Channel1: Channel to Bridge to Channel2 \n "
" *Channel2: Channel to Bridge to Channel1 \n "
" Tone: (Yes|No) Play courtesy tone to Channel 2 \n "
" \n " ;
/*!
* \ brief Actual bridge
* \ param chan
* \ param tmpchan
2007-09-05 16:31:39 +00:00
*
2008-01-23 23:09:11 +00:00
* Stop hold music , lock both channels , masq channels ,
* after bridge return channel to next priority .
2007-08-07 23:04:01 +00:00
*/
2008-01-23 23:09:11 +00:00
static void do_bridge_masquerade ( struct ast_channel * chan , struct ast_channel * tmpchan )
2004-01-30 05:49:44 +00:00
{
2008-01-23 23:09:11 +00:00
ast_moh_stop ( chan ) ;
ast_channel_lock ( chan ) ;
ast_setstate ( tmpchan , chan - > _state ) ;
tmpchan - > readformat = chan - > readformat ;
tmpchan - > writeformat = chan - > writeformat ;
ast_channel_masquerade ( tmpchan , chan ) ;
ast_channel_lock ( tmpchan ) ;
ast_do_masquerade ( tmpchan ) ;
/* when returning from bridge, the channel will continue at the next priority */
ast_explicit_goto ( tmpchan , chan - > context , chan - > exten , chan - > priority + 1 ) ;
ast_channel_unlock ( tmpchan ) ;
ast_channel_unlock ( chan ) ;
2004-01-30 05:49:44 +00:00
}
2007-08-07 23:04:01 +00:00
/*!
2008-01-23 23:09:11 +00:00
* \ brief Bridge channels together
2007-08-07 23:04:01 +00:00
* \ param s
* \ param m
2008-01-23 23:09:11 +00:00
*
* Make sure valid channels were specified ,
* send errors if any of the channels could not be found / locked , answer channels if needed ,
* create the placeholder channels and grab the other channels
* make the channels compatible , send error if we fail doing so
* setup the bridge thread object and start the bridge .
*
* \ retval 0 on success or on incorrect use .
* \ retval 1 on failure to bridge channels .
2007-08-07 23:04:01 +00:00
*/
2008-01-23 23:09:11 +00:00
static int action_bridge ( struct mansession * s , const struct message * m )
2006-03-06 23:12:48 +00:00
{
2008-01-23 23:09:11 +00:00
const char * channela = astman_get_header ( m , " Channel1 " ) ;
const char * channelb = astman_get_header ( m , " Channel2 " ) ;
const char * playtone = astman_get_header ( m , " Tone " ) ;
struct ast_channel * chana = NULL , * chanb = NULL ;
struct ast_channel * tmpchana = NULL , * tmpchanb = NULL ;
struct ast_bridge_thread_obj * tobj = NULL ;
2006-03-06 23:12:48 +00:00
2008-01-23 23:09:11 +00:00
/* make sure valid channels were specified */
if ( ! ast_strlen_zero ( channela ) & & ! ast_strlen_zero ( channelb ) ) {
chana = ast_get_channel_by_name_prefix_locked ( channela , strlen ( channela ) ) ;
chanb = ast_get_channel_by_name_prefix_locked ( channelb , strlen ( channelb ) ) ;
if ( chana )
ast_channel_unlock ( chana ) ;
if ( chanb )
ast_channel_unlock ( chanb ) ;
/* send errors if any of the channels could not be found/locked */
if ( ! chana ) {
char buf [ 256 ] ;
snprintf ( buf , sizeof ( buf ) , " Channel1 does not exists: %s " , channela ) ;
astman_send_error ( s , m , buf ) ;
return 0 ;
}
if ( ! chanb ) {
char buf [ 256 ] ;
snprintf ( buf , sizeof ( buf ) , " Channel2 does not exists: %s " , channelb ) ;
astman_send_error ( s , m , buf ) ;
return 0 ;
}
} else {
astman_send_error ( s , m , " Missing channel parameter in request " ) ;
2006-03-06 23:12:48 +00:00
return 0 ;
}
2008-01-23 23:09:11 +00:00
/* Answer the channels if needed */
if ( chana - > _state ! = AST_STATE_UP )
ast_answer ( chana ) ;
if ( chanb - > _state ! = AST_STATE_UP )
ast_answer ( chanb ) ;
/* create the placeholder channels and grab the other channels */
if ( ! ( tmpchana = ast_channel_alloc ( 0 , AST_STATE_DOWN , NULL , NULL , NULL ,
NULL , NULL , 0 , " Bridge/%s " , chana - > name ) ) ) {
astman_send_error ( s , m , " Unable to create temporary channel! " ) ;
return 1 ;
2006-03-06 23:12:48 +00:00
}
2008-01-23 23:09:11 +00:00
if ( ! ( tmpchanb = ast_channel_alloc ( 0 , AST_STATE_DOWN , NULL , NULL , NULL ,
NULL , NULL , 0 , " Bridge/%s " , chanb - > name ) ) ) {
astman_send_error ( s , m , " Unable to create temporary channels! " ) ;
ast_channel_free ( tmpchana ) ;
return 1 ;
2006-03-06 23:12:48 +00:00
}
2008-01-23 23:09:11 +00:00
do_bridge_masquerade ( chana , tmpchana ) ;
do_bridge_masquerade ( chanb , tmpchanb ) ;
/* make the channels compatible, send error if we fail doing so */
if ( ast_channel_make_compatible ( tmpchana , tmpchanb ) ) {
ast_log ( LOG_WARNING , " Could not make channels %s and %s compatible for manager bridge \n " , tmpchana - > name , tmpchanb - > name ) ;
astman_send_error ( s , m , " Could not make channels compatible for manager bridge " ) ;
ast_hangup ( tmpchana ) ;
ast_hangup ( tmpchanb ) ;
return 1 ;
2006-03-06 23:12:48 +00:00
}
2008-01-23 23:09:11 +00:00
/* setup the bridge thread object and start the bridge */
if ( ! ( tobj = ast_calloc ( 1 , sizeof ( * tobj ) ) ) ) {
ast_log ( LOG_WARNING , " Unable to spawn a new bridge thread on %s and %s: %s \n " , tmpchana - > name , tmpchanb - > name , strerror ( errno ) ) ;
astman_send_error ( s , m , " Unable to spawn a new bridge thread " ) ;
ast_hangup ( tmpchana ) ;
ast_hangup ( tmpchanb ) ;
return 1 ;
2006-03-06 23:12:48 +00:00
}
2008-01-23 23:09:11 +00:00
tobj - > chan = tmpchana ;
tobj - > peer = tmpchanb ;
tobj - > return_to_pbx = 1 ;
if ( ast_true ( playtone ) ) {
if ( ! ast_strlen_zero ( xfersound ) & & ! ast_streamfile ( tmpchanb , xfersound , tmpchanb - > language ) ) {
if ( ast_waitstream ( tmpchanb , " " ) < 0 )
ast_log ( LOG_WARNING , " Failed to play a courtesy tone on chan %s \n " , tmpchanb - > name ) ;
}
2006-03-06 23:12:48 +00:00
}
2008-01-23 23:09:11 +00:00
ast_bridge_call_thread_launch ( tobj ) ;
astman_send_ack ( s , m , " Launched bridge thread with success " ) ;
2006-03-06 23:12:48 +00:00
return 0 ;
}
2007-08-07 23:04:01 +00:00
/*!
2008-01-23 23:09:11 +00:00
* \ brief CLI command to list parked calls
* \ param e
* \ param cmd
* \ param a
*
* Check right usage , lock parking lot , display parked calls , unlock parking lot list .
* \ retval CLI_SUCCESS on success .
* \ retval CLI_SHOWUSAGE on incorrect number of arguments .
* \ retval NULL when tab completion is used .
2007-08-07 23:04:01 +00:00
*/
2008-01-23 23:09:11 +00:00
static char * handle_parkedcalls ( struct ast_cli_entry * e , int cmd , struct ast_cli_args * a )
METERMAIDS:
-----------
- Adding devicestate providers, a new architecture to add non-channel related
device state information, like parking lots, queues, meetmes, vending machines
and Windows 98 reboots (lots of blinking on those lights)
- Adding provider for parking lots, so you can subscribe to the status of a
parking lot
- Adding provider for meetme, so you can have a blinking lamp for a meetme
( Example: exten => edvina,hint,meetme:1234 )
- Adding support for directed parking - set the PARKINGEXTEN before you manually
call Park() and you will be parked on that space. If it's occupied, dialplan
execution will continue.
This work was sponsored by Voop A/S - www.voop.com
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@36055 65c4cc65-6c06-0410-ace0-fbb531ad65f3
2006-06-26 16:43:21 +00:00
{
2008-01-23 23:09:11 +00:00
struct parkeduser * cur ;
int numparked = 0 ;
2008-04-21 23:42:45 +00:00
struct ao2_iterator iter ;
struct ast_parkinglot * curlot ;
METERMAIDS:
-----------
- Adding devicestate providers, a new architecture to add non-channel related
device state information, like parking lots, queues, meetmes, vending machines
and Windows 98 reboots (lots of blinking on those lights)
- Adding provider for parking lots, so you can subscribe to the status of a
parking lot
- Adding provider for meetme, so you can have a blinking lamp for a meetme
( Example: exten => edvina,hint,meetme:1234 )
- Adding support for directed parking - set the PARKINGEXTEN before you manually
call Park() and you will be parked on that space. If it's occupied, dialplan
execution will continue.
This work was sponsored by Voop A/S - www.voop.com
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@36055 65c4cc65-6c06-0410-ace0-fbb531ad65f3
2006-06-26 16:43:21 +00:00
2008-01-23 23:09:11 +00:00
switch ( cmd ) {
case CLI_INIT :
e - > command = " parkedcalls show " ;
e - > usage =
" Usage: parkedcalls show \n "
" List currently parked calls \n " ;
return NULL ;
case CLI_GENERATE :
return NULL ;
METERMAIDS:
-----------
- Adding devicestate providers, a new architecture to add non-channel related
device state information, like parking lots, queues, meetmes, vending machines
and Windows 98 reboots (lots of blinking on those lights)
- Adding provider for parking lots, so you can subscribe to the status of a
parking lot
- Adding provider for meetme, so you can have a blinking lamp for a meetme
( Example: exten => edvina,hint,meetme:1234 )
- Adding support for directed parking - set the PARKINGEXTEN before you manually
call Park() and you will be parked on that space. If it's occupied, dialplan
execution will continue.
This work was sponsored by Voop A/S - www.voop.com
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@36055 65c4cc65-6c06-0410-ace0-fbb531ad65f3
2006-06-26 16:43:21 +00:00
}
2005-10-13 23:58:33 +00:00
2008-01-23 23:09:11 +00:00
if ( a - > argc > e - > args )
return CLI_SHOWUSAGE ;
2005-10-13 23:58:33 +00:00
2008-01-23 23:09:11 +00:00
ast_cli ( a - > fd , " %4s %25s (%-15s %-12s %-4s) %-6s \n " , " Num " , " Channel "
, " Context " , " Extension " , " Pri " , " Timeout " ) ;
2005-01-04 04:01:40 +00:00
2008-04-21 23:42:45 +00:00
iter = ao2_iterator_init ( parkinglots , 0 ) ;
while ( ( curlot = ao2_iterator_next ( & iter ) ) ) {
int lotparked = 0 ;
ast_cli ( a - > fd , " *** Parking lot: %s \n " , curlot - > name ) ;
AST_LIST_LOCK ( & curlot - > parkings ) ;
AST_LIST_TRAVERSE ( & curlot - > parkings , cur , list ) {
ast_cli ( a - > fd , " %-10.10s %25s (%-15s %-12s %-4d) %6lds \n "
, cur - > parkingexten , cur - > chan - > name , cur - > context , cur - > exten
2008-05-15 10:56:29 +00:00
, cur - > priority ,
( long ) ( cur - > start . tv_sec + ( cur - > parkingtime / 1000 ) - time ( NULL ) ) ) ;
2008-04-21 23:42:45 +00:00
numparked + + ;
numparked + = lotparked ;
}
AST_LIST_UNLOCK ( & curlot - > parkings ) ;
if ( lotparked )
ast_cli ( a - > fd , " %d parked call%s in parking lot %s \n " , lotparked , ESS ( lotparked ) , curlot - > name ) ;
2005-08-23 02:22:33 +00:00
2008-04-21 23:42:45 +00:00
ao2_ref ( curlot , - 1 ) ;
2006-08-31 21:00:20 +00:00
}
2008-04-21 23:42:45 +00:00
ast_cli ( a - > fd , " --- \n %d parked call%s in total. \n " , numparked , ESS ( numparked ) ) ;
2006-08-31 21:00:20 +00:00
2008-01-23 23:09:11 +00:00
return CLI_SUCCESS ;
}
2006-08-31 21:00:20 +00:00
2008-01-23 23:09:11 +00:00
static struct ast_cli_entry cli_features [ ] = {
AST_CLI_DEFINE ( handle_feature_show , " Lists configured features " ) ,
AST_CLI_DEFINE ( handle_features_reload , " Reloads configured features " ) ,
2008-07-10 16:21:16 +00:00
AST_CLI_DEFINE ( handle_parkedcalls , " List currently parked calls " ) ,
2008-01-23 23:09:11 +00:00
} ;
2005-08-23 02:22:33 +00:00
2008-01-23 23:09:11 +00:00
/*!
* \ brief Dump parking lot status
* \ param s
* \ param m
*
* Lock parking lot , iterate list and append parked calls status , unlock parking lot .
* \ return Always RESULT_SUCCESS
*/
static int manager_parking_status ( struct mansession * s , const struct message * m )
{
struct parkeduser * cur ;
const char * id = astman_get_header ( m , " ActionID " ) ;
char idText [ 256 ] = " " ;
2008-04-21 23:42:45 +00:00
struct ao2_iterator iter ;
struct ast_parkinglot * curlot ;
2005-08-23 02:22:33 +00:00
2008-01-23 23:09:11 +00:00
if ( ! ast_strlen_zero ( id ) )
snprintf ( idText , sizeof ( idText ) , " ActionID: %s \r \n " , id ) ;
2006-08-31 21:00:20 +00:00
2008-01-23 23:09:11 +00:00
astman_send_ack ( s , m , " Parked calls will follow " ) ;
2005-08-23 02:22:33 +00:00
2008-04-21 23:42:45 +00:00
iter = ao2_iterator_init ( parkinglots , 0 ) ;
while ( ( curlot = ao2_iterator_next ( & iter ) ) ) {
AST_LIST_LOCK ( & curlot - > parkings ) ;
AST_LIST_TRAVERSE ( & curlot - > parkings , cur , list ) {
astman_append ( s , " Event: ParkedCall \r \n "
" Exten: %d \r \n "
" Channel: %s \r \n "
" From: %s \r \n "
" Timeout: %ld \r \n "
" CallerIDNum: %s \r \n "
" CallerIDName: %s \r \n "
" %s "
" \r \n " ,
cur - > parkingnum , cur - > chan - > name , cur - > peername ,
( long ) cur - > start . tv_sec + ( long ) ( cur - > parkingtime / 1000 ) - ( long ) time ( NULL ) ,
S_OR ( cur - > chan - > cid . cid_num , " " ) , /* XXX in other places it is <unknown> */
S_OR ( cur - > chan - > cid . cid_name , " " ) ,
idText ) ;
}
AST_LIST_UNLOCK ( & curlot - > parkings ) ;
ao2_ref ( curlot , - 1 ) ;
2007-05-31 18:21:47 +00:00
}
2008-01-23 23:09:11 +00:00
astman_append ( s ,
" Event: ParkedCallsComplete \r \n "
" %s "
" \r \n " , idText ) ;
2007-05-31 18:21:47 +00:00
2008-01-23 23:09:11 +00:00
return RESULT_SUCCESS ;
}
2007-05-31 18:21:47 +00:00
2008-01-23 23:09:11 +00:00
static char mandescr_park [ ] =
" Description: Park a channel. \n "
" Variables: (Names marked with * are required) \n "
" *Channel: Channel name to park \n "
" *Channel2: Channel to announce park info to (and return to if timeout) \n "
" Timeout: Number of milliseconds to wait before callback. \n " ;
2007-05-31 18:21:47 +00:00
2008-01-23 23:09:11 +00:00
/*!
* \ brief Create manager event for parked calls
* \ param s
* \ param m
*
* Get channels involved in park , create event .
* \ return Always 0
*/
static int manager_park ( struct mansession * s , const struct message * m )
{
const char * channel = astman_get_header ( m , " Channel " ) ;
const char * channel2 = astman_get_header ( m , " Channel2 " ) ;
const char * timeout = astman_get_header ( m , " Timeout " ) ;
char buf [ BUFSIZ ] ;
int to = 0 ;
int res = 0 ;
int parkExt = 0 ;
struct ast_channel * ch1 , * ch2 ;
2007-06-28 19:02:31 +00:00
2008-01-23 23:09:11 +00:00
if ( ast_strlen_zero ( channel ) ) {
astman_send_error ( s , m , " Channel not specified " ) ;
return 0 ;
}
2007-05-31 18:21:47 +00:00
2008-01-23 23:09:11 +00:00
if ( ast_strlen_zero ( channel2 ) ) {
astman_send_error ( s , m , " Channel2 not specified " ) ;
return 0 ;
2007-05-31 18:21:47 +00:00
}
2008-01-23 23:09:11 +00:00
ch1 = ast_get_channel_by_name_locked ( channel ) ;
if ( ! ch1 ) {
snprintf ( buf , sizeof ( buf ) , " Channel does not exist: %s " , channel ) ;
astman_send_error ( s , m , buf ) ;
return 0 ;
}
2007-05-31 18:21:47 +00:00
2008-01-23 23:09:11 +00:00
ch2 = ast_get_channel_by_name_locked ( channel2 ) ;
if ( ! ch2 ) {
snprintf ( buf , sizeof ( buf ) , " Channel does not exist: %s " , channel2 ) ;
astman_send_error ( s , m , buf ) ;
ast_channel_unlock ( ch1 ) ;
return 0 ;
}
2005-08-23 02:22:33 +00:00
2008-01-23 23:09:11 +00:00
if ( ! ast_strlen_zero ( timeout ) ) {
sscanf ( timeout , " %d " , & to ) ;
2005-10-13 23:58:33 +00:00
}
2008-01-23 23:09:11 +00:00
res = ast_masq_park_call ( ch1 , ch2 , to , & parkExt ) ;
if ( ! res ) {
ast_softhangup ( ch2 , AST_SOFTHANGUP_EXPLICIT ) ;
astman_send_ack ( s , m , " Park successful " ) ;
} else {
astman_send_error ( s , m , " Park failure " ) ;
2001-12-27 11:07:33 +00:00
}
METERMAIDS:
-----------
- Adding devicestate providers, a new architecture to add non-channel related
device state information, like parking lots, queues, meetmes, vending machines
and Windows 98 reboots (lots of blinking on those lights)
- Adding provider for parking lots, so you can subscribe to the status of a
parking lot
- Adding provider for meetme, so you can have a blinking lamp for a meetme
( Example: exten => edvina,hint,meetme:1234 )
- Adding support for directed parking - set the PARKINGEXTEN before you manually
call Park() and you will be parked on that space. If it's occupied, dialplan
execution will continue.
This work was sponsored by Voop A/S - www.voop.com
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@36055 65c4cc65-6c06-0410-ace0-fbb531ad65f3
2006-06-26 16:43:21 +00:00
2008-01-23 23:09:11 +00:00
ast_channel_unlock ( ch1 ) ;
ast_channel_unlock ( ch2 ) ;
return 0 ;
}
/*!
* \ brief Pickup a call
* \ param chan channel that initiated pickup .
*
* Walk list of channels , checking it is not itself , channel is pbx one ,
* check that the callgroup for both channels are the same and the channel is ringing .
* Answer calling channel , flag channel as answered on queue , masq channels together .
*/
int ast_pickup_call ( struct ast_channel * chan )
{
struct ast_channel * cur = NULL ;
int res = - 1 ;
while ( ( cur = ast_channel_walk_locked ( cur ) ) ! = NULL ) {
if ( ! cur - > pbx & &
( cur ! = chan ) & &
( chan - > pickupgroup & cur - > callgroup ) & &
( ( cur - > _state = = AST_STATE_RINGING ) | |
( cur - > _state = = AST_STATE_RING ) ) ) {
break ;
}
ast_channel_unlock ( cur ) ;
}
if ( cur ) {
ast_debug ( 1 , " Call pickup on chan '%s' by '%s' \n " , cur - > name , chan - > name ) ;
res = ast_answer ( chan ) ;
if ( res )
ast_log ( LOG_WARNING , " Unable to answer '%s' \n " , chan - > name ) ;
res = ast_queue_control ( chan , AST_CONTROL_ANSWER ) ;
if ( res )
ast_log ( LOG_WARNING , " Unable to queue answer on '%s' \n " , chan - > name ) ;
res = ast_channel_masquerade ( cur , chan ) ;
if ( res )
ast_log ( LOG_WARNING , " Unable to masquerade '%s' into '%s' \n " , chan - > name , cur - > name ) ; /* Done */
ast_channel_unlock ( cur ) ;
} else {
ast_debug ( 1 , " No call pickup possible... \n " ) ;
}
return res ;
2005-01-10 04:03:30 +00:00
}
Merge changes from team/russell/issue_5841:
This patch adds a "Bridge" Manager action, as well as a "Bridge" dialplan
application. The manager action will allow you to steal two active channels
in the system and bridge them together. Then, the one that did not hang up
will continue in the dialplan. Using the application will bridge the calling
channel to an arbitrary channel in the system. Whichever channel does not
hang up here will continue in the dialplan, as well.
This patch has been touched by a bunch of people over the course of a couple
years. Please forgive me if I have missed your name in the history of things.
The most recent patch came from issue #5841, but there is also a reference to
an earlier version of this patch from issue #4297. The people involved in writing
and/or reviewing the code include at least: twisted, mflorrel, heath1444, davetroy,
tim_ringenbach, moy, tmancill, serge-v, and me. There are also positive test
reports from many people.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@61281 65c4cc65-6c06-0410-ace0-fbb531ad65f3
2007-04-10 20:44:44 +00:00
static char * app_bridge = " Bridge " ;
static char * bridge_synopsis = " Bridge two channels " ;
static char * bridge_descrip =
2007-11-06 19:04:45 +00:00
" Usage: Bridge(channel[,options]) \n "
Merge changes from team/russell/issue_5841:
This patch adds a "Bridge" Manager action, as well as a "Bridge" dialplan
application. The manager action will allow you to steal two active channels
in the system and bridge them together. Then, the one that did not hang up
will continue in the dialplan. Using the application will bridge the calling
channel to an arbitrary channel in the system. Whichever channel does not
hang up here will continue in the dialplan, as well.
This patch has been touched by a bunch of people over the course of a couple
years. Please forgive me if I have missed your name in the history of things.
The most recent patch came from issue #5841, but there is also a reference to
an earlier version of this patch from issue #4297. The people involved in writing
and/or reviewing the code include at least: twisted, mflorrel, heath1444, davetroy,
tim_ringenbach, moy, tmancill, serge-v, and me. There are also positive test
reports from many people.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@61281 65c4cc65-6c06-0410-ace0-fbb531ad65f3
2007-04-10 20:44:44 +00:00
" Allows the ability to bridge two channels via the dialplan. \n "
" The current channel is bridged to the specified 'channel'. \n "
2007-11-06 19:04:45 +00:00
" Options: \n "
" p - Play a courtesy tone to 'channel'. \n "
" This application sets the following channel variable upon completion: \n "
" BRIDGERESULT The result of the bridge attempt as a text string, one of \n "
" SUCCESS | FAILURE | LOOP | NONEXISTENT | INCOMPATIBLE \n " ;
Merge changes from team/russell/issue_5841:
This patch adds a "Bridge" Manager action, as well as a "Bridge" dialplan
application. The manager action will allow you to steal two active channels
in the system and bridge them together. Then, the one that did not hang up
will continue in the dialplan. Using the application will bridge the calling
channel to an arbitrary channel in the system. Whichever channel does not
hang up here will continue in the dialplan, as well.
This patch has been touched by a bunch of people over the course of a couple
years. Please forgive me if I have missed your name in the history of things.
The most recent patch came from issue #5841, but there is also a reference to
an earlier version of this patch from issue #4297. The people involved in writing
and/or reviewing the code include at least: twisted, mflorrel, heath1444, davetroy,
tim_ringenbach, moy, tmancill, serge-v, and me. There are also positive test
reports from many people.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@61281 65c4cc65-6c06-0410-ace0-fbb531ad65f3
2007-04-10 20:44:44 +00:00
enum {
BRIDGE_OPT_PLAYTONE = ( 1 < < 0 ) ,
} ;
AST_APP_OPTIONS ( bridge_exec_options , BEGIN_OPTIONS
AST_APP_OPTION ( ' p ' , BRIDGE_OPT_PLAYTONE )
END_OPTIONS ) ;
2007-08-07 23:04:01 +00:00
/*!
* \ brief Bridge channels
* \ param chan
2007-09-05 16:31:39 +00:00
* \ param data channel to bridge with .
*
2007-08-07 23:04:01 +00:00
* Split data , check we aren ' t bridging with ourself , check valid channel ,
* answer call if not already , check compatible channels , setup bridge config
* now bridge call , if transfered party hangs up return to PBX extension .
*/
Merge changes from team/russell/issue_5841:
This patch adds a "Bridge" Manager action, as well as a "Bridge" dialplan
application. The manager action will allow you to steal two active channels
in the system and bridge them together. Then, the one that did not hang up
will continue in the dialplan. Using the application will bridge the calling
channel to an arbitrary channel in the system. Whichever channel does not
hang up here will continue in the dialplan, as well.
This patch has been touched by a bunch of people over the course of a couple
years. Please forgive me if I have missed your name in the history of things.
The most recent patch came from issue #5841, but there is also a reference to
an earlier version of this patch from issue #4297. The people involved in writing
and/or reviewing the code include at least: twisted, mflorrel, heath1444, davetroy,
tim_ringenbach, moy, tmancill, serge-v, and me. There are also positive test
reports from many people.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@61281 65c4cc65-6c06-0410-ace0-fbb531ad65f3
2007-04-10 20:44:44 +00:00
static int bridge_exec ( struct ast_channel * chan , void * data )
{
struct ast_channel * current_dest_chan , * final_dest_chan ;
char * tmp_data = NULL ;
struct ast_flags opts = { 0 , } ;
struct ast_bridge_config bconfig = { { 0 , } , } ;
AST_DECLARE_APP_ARGS ( args ,
AST_APP_ARG ( dest_chan ) ;
AST_APP_ARG ( options ) ;
) ;
if ( ast_strlen_zero ( data ) ) {
ast_log ( LOG_WARNING , " Bridge require at least 1 argument specifying the other end of the bridge \n " ) ;
return - 1 ;
}
tmp_data = ast_strdupa ( data ) ;
AST_STANDARD_APP_ARGS ( args , tmp_data ) ;
if ( ! ast_strlen_zero ( args . options ) )
ast_app_parse_options ( bridge_exec_options , & opts , NULL , args . options ) ;
/* avoid bridge with ourselves */
if ( ! strncmp ( chan - > name , args . dest_chan ,
strlen ( chan - > name ) < strlen ( args . dest_chan ) ?
strlen ( chan - > name ) : strlen ( args . dest_chan ) ) ) {
ast_log ( LOG_WARNING , " Unable to bridge channel %s with itself \n " , chan - > name ) ;
manager_event ( EVENT_FLAG_CALL , " BridgeExec " ,
" Response: Failed \r \n "
" Reason: Unable to bridge channel to itself \r \n "
" Channel1: %s \r \n "
" Channel2: %s \r \n " ,
chan - > name , args . dest_chan ) ;
pbx_builtin_setvar_helper ( chan , " BRIDGERESULT " , " LOOP " ) ;
return 0 ;
}
/* make sure we have a valid end point */
if ( ! ( current_dest_chan = ast_get_channel_by_name_prefix_locked ( args . dest_chan ,
strlen ( args . dest_chan ) ) ) ) {
ast_log ( LOG_WARNING , " Bridge failed because channel %s does not exists or we "
" cannot get its lock \n " , args . dest_chan ) ;
manager_event ( EVENT_FLAG_CALL , " BridgeExec " ,
" Response: Failed \r \n "
" Reason: Cannot grab end point \r \n "
" Channel1: %s \r \n "
" Channel2: %s \r \n " , chan - > name , args . dest_chan ) ;
pbx_builtin_setvar_helper ( chan , " BRIDGERESULT " , " NONEXISTENT " ) ;
return 0 ;
}
2007-11-15 16:20:47 +00:00
ast_channel_unlock ( current_dest_chan ) ;
Merge changes from team/russell/issue_5841:
This patch adds a "Bridge" Manager action, as well as a "Bridge" dialplan
application. The manager action will allow you to steal two active channels
in the system and bridge them together. Then, the one that did not hang up
will continue in the dialplan. Using the application will bridge the calling
channel to an arbitrary channel in the system. Whichever channel does not
hang up here will continue in the dialplan, as well.
This patch has been touched by a bunch of people over the course of a couple
years. Please forgive me if I have missed your name in the history of things.
The most recent patch came from issue #5841, but there is also a reference to
an earlier version of this patch from issue #4297. The people involved in writing
and/or reviewing the code include at least: twisted, mflorrel, heath1444, davetroy,
tim_ringenbach, moy, tmancill, serge-v, and me. There are also positive test
reports from many people.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@61281 65c4cc65-6c06-0410-ace0-fbb531ad65f3
2007-04-10 20:44:44 +00:00
/* answer the channel if needed */
if ( current_dest_chan - > _state ! = AST_STATE_UP )
ast_answer ( current_dest_chan ) ;
/* try to allocate a place holder where current_dest_chan will be placed */
if ( ! ( final_dest_chan = ast_channel_alloc ( 0 , AST_STATE_DOWN , NULL , NULL , NULL ,
NULL , NULL , 0 , " Bridge/%s " , current_dest_chan - > name ) ) ) {
ast_log ( LOG_WARNING , " Cannot create placeholder channel for chan %s \n " , args . dest_chan ) ;
manager_event ( EVENT_FLAG_CALL , " BridgeExec " ,
" Response: Failed \r \n "
" Reason: cannot create placeholder \r \n "
" Channel1: %s \r \n "
" Channel2: %s \r \n " , chan - > name , args . dest_chan ) ;
}
do_bridge_masquerade ( current_dest_chan , final_dest_chan ) ;
/* now current_dest_chan is a ZOMBIE and with softhangup set to 1 and final_dest_chan is our end point */
/* try to make compatible, send error if we fail */
if ( ast_channel_make_compatible ( chan , final_dest_chan ) < 0 ) {
ast_log ( LOG_WARNING , " Could not make channels %s and %s compatible for bridge \n " , chan - > name , final_dest_chan - > name ) ;
manager_event ( EVENT_FLAG_CALL , " BridgeExec " ,
" Response: Failed \r \n "
" Reason: Could not make channels compatible for bridge \r \n "
" Channel1: %s \r \n "
" Channel2: %s \r \n " , chan - > name , final_dest_chan - > name ) ;
ast_hangup ( final_dest_chan ) ; /* may be we should return this channel to the PBX? */
pbx_builtin_setvar_helper ( chan , " BRIDGERESULT " , " INCOMPATIBLE " ) ;
return 0 ;
}
/* Report that the bridge will be successfull */
manager_event ( EVENT_FLAG_CALL , " BridgeExec " ,
" Response: Success \r \n "
" Channel1: %s \r \n "
" Channel2: %s \r \n " , chan - > name , final_dest_chan - > name ) ;
/* we have 2 valid channels to bridge, now it is just a matter of setting up the bridge config and starting the bridge */
if ( ast_test_flag ( & opts , BRIDGE_OPT_PLAYTONE ) & & ! ast_strlen_zero ( xfersound ) ) {
if ( ! ast_streamfile ( final_dest_chan , xfersound , final_dest_chan - > language ) ) {
if ( ast_waitstream ( final_dest_chan , " " ) < 0 )
ast_log ( LOG_WARNING , " Failed to play courtesy tone on %s \n " , final_dest_chan - > name ) ;
}
}
/* do the bridge */
ast_bridge_call ( chan , final_dest_chan , & bconfig ) ;
/* the bridge has ended, set BRIDGERESULT to SUCCESS. If the other channel has not been hung up, return it to the PBX */
pbx_builtin_setvar_helper ( chan , " BRIDGERESULT " , " SUCCESS " ) ;
if ( ! ast_check_hangup ( final_dest_chan ) ) {
2007-06-14 19:39:12 +00:00
ast_debug ( 1 , " starting new PBX in %s,%s,%d for chan %s \n " ,
Merge changes from team/russell/issue_5841:
This patch adds a "Bridge" Manager action, as well as a "Bridge" dialplan
application. The manager action will allow you to steal two active channels
in the system and bridge them together. Then, the one that did not hang up
will continue in the dialplan. Using the application will bridge the calling
channel to an arbitrary channel in the system. Whichever channel does not
hang up here will continue in the dialplan, as well.
This patch has been touched by a bunch of people over the course of a couple
years. Please forgive me if I have missed your name in the history of things.
The most recent patch came from issue #5841, but there is also a reference to
an earlier version of this patch from issue #4297. The people involved in writing
and/or reviewing the code include at least: twisted, mflorrel, heath1444, davetroy,
tim_ringenbach, moy, tmancill, serge-v, and me. There are also positive test
reports from many people.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@61281 65c4cc65-6c06-0410-ace0-fbb531ad65f3
2007-04-10 20:44:44 +00:00
final_dest_chan - > context , final_dest_chan - > exten ,
final_dest_chan - > priority , final_dest_chan - > name ) ;
if ( ast_pbx_start ( final_dest_chan ) ! = AST_PBX_SUCCESS ) {
ast_log ( LOG_WARNING , " FAILED continuing PBX on dest chan %s \n " , final_dest_chan - > name ) ;
ast_hangup ( final_dest_chan ) ;
2007-06-14 19:39:12 +00:00
} else
ast_debug ( 1 , " SUCCESS continuing PBX on chan %s \n " , final_dest_chan - > name ) ;
Merge changes from team/russell/issue_5841:
This patch adds a "Bridge" Manager action, as well as a "Bridge" dialplan
application. The manager action will allow you to steal two active channels
in the system and bridge them together. Then, the one that did not hang up
will continue in the dialplan. Using the application will bridge the calling
channel to an arbitrary channel in the system. Whichever channel does not
hang up here will continue in the dialplan, as well.
This patch has been touched by a bunch of people over the course of a couple
years. Please forgive me if I have missed your name in the history of things.
The most recent patch came from issue #5841, but there is also a reference to
an earlier version of this patch from issue #4297. The people involved in writing
and/or reviewing the code include at least: twisted, mflorrel, heath1444, davetroy,
tim_ringenbach, moy, tmancill, serge-v, and me. There are also positive test
reports from many people.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@61281 65c4cc65-6c06-0410-ace0-fbb531ad65f3
2007-04-10 20:44:44 +00:00
} else {
2007-06-14 19:39:12 +00:00
ast_debug ( 1 , " hangup chan %s since the other endpoint has hung up \n " , final_dest_chan - > name ) ;
Merge changes from team/russell/issue_5841:
This patch adds a "Bridge" Manager action, as well as a "Bridge" dialplan
application. The manager action will allow you to steal two active channels
in the system and bridge them together. Then, the one that did not hang up
will continue in the dialplan. Using the application will bridge the calling
channel to an arbitrary channel in the system. Whichever channel does not
hang up here will continue in the dialplan, as well.
This patch has been touched by a bunch of people over the course of a couple
years. Please forgive me if I have missed your name in the history of things.
The most recent patch came from issue #5841, but there is also a reference to
an earlier version of this patch from issue #4297. The people involved in writing
and/or reviewing the code include at least: twisted, mflorrel, heath1444, davetroy,
tim_ringenbach, moy, tmancill, serge-v, and me. There are also positive test
reports from many people.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@61281 65c4cc65-6c06-0410-ace0-fbb531ad65f3
2007-04-10 20:44:44 +00:00
ast_hangup ( final_dest_chan ) ;
}
return 0 ;
}
2008-01-23 23:09:11 +00:00
int ast_features_init ( void )
2005-01-10 04:03:30 +00:00
{
int res ;
Merge changes from team/russell/issue_5841:
This patch adds a "Bridge" Manager action, as well as a "Bridge" dialplan
application. The manager action will allow you to steal two active channels
in the system and bridge them together. Then, the one that did not hang up
will continue in the dialplan. Using the application will bridge the calling
channel to an arbitrary channel in the system. Whichever channel does not
hang up here will continue in the dialplan, as well.
This patch has been touched by a bunch of people over the course of a couple
years. Please forgive me if I have missed your name in the history of things.
The most recent patch came from issue #5841, but there is also a reference to
an earlier version of this patch from issue #4297. The people involved in writing
and/or reviewing the code include at least: twisted, mflorrel, heath1444, davetroy,
tim_ringenbach, moy, tmancill, serge-v, and me. There are also positive test
reports from many people.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@61281 65c4cc65-6c06-0410-ace0-fbb531ad65f3
2007-04-10 20:44:44 +00:00
2008-01-23 23:09:11 +00:00
ast_register_application2 ( app_bridge , bridge_exec , bridge_synopsis , bridge_descrip , NULL ) ;
Merge changes from team/russell/issue_5841:
This patch adds a "Bridge" Manager action, as well as a "Bridge" dialplan
application. The manager action will allow you to steal two active channels
in the system and bridge them together. Then, the one that did not hang up
will continue in the dialplan. Using the application will bridge the calling
channel to an arbitrary channel in the system. Whichever channel does not
hang up here will continue in the dialplan, as well.
This patch has been touched by a bunch of people over the course of a couple
years. Please forgive me if I have missed your name in the history of things.
The most recent patch came from issue #5841, but there is also a reference to
an earlier version of this patch from issue #4297. The people involved in writing
and/or reviewing the code include at least: twisted, mflorrel, heath1444, davetroy,
tim_ringenbach, moy, tmancill, serge-v, and me. There are also positive test
reports from many people.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@61281 65c4cc65-6c06-0410-ace0-fbb531ad65f3
2007-04-10 20:44:44 +00:00
2008-04-21 23:42:45 +00:00
parkinglots = ao2_container_alloc ( 7 , parkinglot_hash_cb , parkinglot_cmp_cb ) ;
2005-08-23 02:22:33 +00:00
2005-01-10 04:03:30 +00:00
if ( ( res = load_config ( ) ) )
return res ;
2006-09-18 19:54:18 +00:00
ast_cli_register_multiple ( cli_features , sizeof ( cli_features ) / sizeof ( struct ast_cli_entry ) ) ;
2004-08-08 17:15:02 +00:00
ast_pthread_create ( & parking_thread , NULL , do_parking_thread , NULL ) ;
2008-01-23 23:09:11 +00:00
res = ast_register_application2 ( parkedcall , park_exec , synopsis , descrip , NULL ) ;
2004-08-03 06:31:20 +00:00
if ( ! res )
2008-01-23 23:09:11 +00:00
res = ast_register_application2 ( parkcall , park_call_exec , synopsis2 , descrip2 , NULL ) ;
2004-01-30 05:49:44 +00:00
if ( ! res ) {
Merge changes from team/russell/issue_5841:
This patch adds a "Bridge" Manager action, as well as a "Bridge" dialplan
application. The manager action will allow you to steal two active channels
in the system and bridge them together. Then, the one that did not hang up
will continue in the dialplan. Using the application will bridge the calling
channel to an arbitrary channel in the system. Whichever channel does not
hang up here will continue in the dialplan, as well.
This patch has been touched by a bunch of people over the course of a couple
years. Please forgive me if I have missed your name in the history of things.
The most recent patch came from issue #5841, but there is also a reference to
an earlier version of this patch from issue #4297. The people involved in writing
and/or reviewing the code include at least: twisted, mflorrel, heath1444, davetroy,
tim_ringenbach, moy, tmancill, serge-v, and me. There are also positive test
reports from many people.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@61281 65c4cc65-6c06-0410-ace0-fbb531ad65f3
2007-04-10 20:44:44 +00:00
ast_manager_register ( " ParkedCalls " , 0 , manager_parking_status , " List parked calls " ) ;
2008-04-21 23:42:45 +00:00
ast_manager_register2 ( " Park " , EVENT_FLAG_CALL , manager_park , " Park a channel " , mandescr_park ) ;
2008-01-10 00:12:35 +00:00
ast_manager_register2 ( " Bridge " , EVENT_FLAG_CALL , action_bridge , " Bridge two channels already in the PBX " , mandescr_bridge ) ;
2004-01-30 05:49:44 +00:00
}
METERMAIDS:
-----------
- Adding devicestate providers, a new architecture to add non-channel related
device state information, like parking lots, queues, meetmes, vending machines
and Windows 98 reboots (lots of blinking on those lights)
- Adding provider for parking lots, so you can subscribe to the status of a
parking lot
- Adding provider for meetme, so you can have a blinking lamp for a meetme
( Example: exten => edvina,hint,meetme:1234 )
- Adding support for directed parking - set the PARKINGEXTEN before you manually
call Park() and you will be parked on that space. If it's occupied, dialplan
execution will continue.
This work was sponsored by Voop A/S - www.voop.com
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@36055 65c4cc65-6c06-0410-ace0-fbb531ad65f3
2006-06-26 16:43:21 +00:00
res | = ast_devstate_prov_add ( " Park " , metermaidstate ) ;
2001-12-27 11:07:33 +00:00
return res ;
}