When code imparts a channel into a bridge to swap with another channel, a
ref needs to be held on the swap channel to ensure that it cannot
dissapear before finding it in the bridge.
* The ast_bridge_join() swap channel parameter now always steals a ref for
the swap channel. This is the only change to the bridge framework's
public API semantics.
* bridge_channel_internal_join() now requires the bridge_channel->swap
channel to pass in a ref.
ASTERISK-24649
Reported by: John Bigelow
Review: https://reviewboard.asterisk.org/r/4354/
........
Merged revisions 430975 from http://svn.asterisk.org/svn/asterisk/branches/13
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@430976 65c4cc65-6c06-0410-ace0-fbb531ad65f3
After a bridge transfer completes where a local replacement
channel is used, a stasis transfer message with the details
of the transfer is sent. This is processed by stasis which
then sets the stasis app name and replaced channel snapshot
on the replacement channel.
However, since a separate thread was already started to run
stasis on the new replacement channel, a race was on to see
if the message processing would be completed before the app
name was needed, otherwise the channel would be hung up.
This change moves the calls used to set the stasis app name
and the replace snapshot to the bridge_stasis_push function
callback from the bridge transfer logic, allowing the steps
to be completed earlier and more deterministically, and the
race elimianted.
NOTE: the swap channel parameter to bridge_stasis_push (and
thus all bridge push callbacks) must always be present when
performing a swap with another channel.
ASTERISK-24649 #close
Reported by: John Bigelow
Review: https://reviewboard.asterisk.org/r/4341/
........
Merged revisions 430939 from http://svn.asterisk.org/svn/asterisk/branches/13
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@430940 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The MixMonitor m() option allows a recording to be pushed to a specific
voicemail mailbox. If the message is delivered to the mailbox's INBOX, however,
no MWI notification is currently raised.
This patch corrects the issue by properly calling notify_new_state from the
msg_create_from_file function. This will cause MWI to be triggered if the
message was placed in the mailbox's INBOX.
ASTERISK-24709 #close
Reported by: Gareth Palmer
patches:
app_voicemail-430919.patch uploaded by Gareth Palmer (License 5169)
........
Merged revisions 430920 from http://svn.asterisk.org/svn/asterisk/branches/11
........
Merged revisions 430921 from http://svn.asterisk.org/svn/asterisk/branches/13
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@430922 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When the SIP registrations were migrated to using ao2 in what was then trunk,
the explicit destruction of the registrations on module reload was removed and
not replaced with an ao2 equivalent. Debugging done by Stefan Engström, the
issue reporter, on ASTERISK-24673 confirmed that the reference in the
registry_list container was being leaked.
Since the purpose of cleanup_all_regs is to prep a registration for
destruction, this function now calls an ao2_callback function callback with the
OBJ_MULTIPLE | OBJ_NODATA | OBJ_UNLINK flags used to remove the registrations.
This cleans up each registration, and also removes it from the registration
container registry_list.
Review: https://reviewboard.asterisk.org/r/4355/
ASTERISK-24640 #close
Reported by: Max Man
ASTERISK-24673 #close
Reported by: Stefan Engström
Tested by: Stefan Engström
........
Merged revisions 430864 from http://svn.asterisk.org/svn/asterisk/branches/13
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@430866 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch adds AMI event documentation for the Cdr and CEL AMI events.
Note that while these events do share fields with each other and with other
channel related events, they do not contain all of the fields in a standard
channel snapshot, nor is the description of the fields identical. As such,
the patch opts for documentation for each field, for each event.
Review: https://reviewboard.asterisk.org/r/4350/
ASTERISK-24671 #close
Reported by: Dan Jenkins
........
Merged revisions 430862 from http://svn.asterisk.org/svn/asterisk/branches/13
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@430863 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The Dial application has some interesting options with the mid-call Macro (M)
and GoSub (U) options. If the MACRO_RESULT/GOSUB_RESULT returns specific
values, the Dial application will take some action upon the channels involved
in the dial operation (such as hanging up a particular party, etc.) The Dial
application ensures that a Stasis message is published in the event that
MACRO_RESULT/GOSUB_RESULT returns a value that kills the dial operation, so
that there is a corresponding DialEnd event published in AMI/ARI for the
DialBegin event that preceeded it.
A bug exists where that same DialEnd event will be published on Stasis even if
the value returned in MACRO_RESULT/GOSUB_RESULT is not one that the Dial
application cares about. This causes two DialEnd events to be published - one
with the MACRO_RESULT/GOSUB_RESULT and another with "ANSWERED" - which is all
sorts of wrong.
This patch fixes the bug by ensuring that we only publish a DialEnd message to
Stasis if the Dial application's mid-call Macro/GoSub returns something that
Dial cares about.
Review: https://reviewboard.asterisk.org/r/4336
ASTERISK-24682 #close
Reported by: Matt Jordan
........
Merged revisions 430842 from http://svn.asterisk.org/svn/asterisk/branches/13
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@430844 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When the RTCP reports are created, the NTP timestamps are stored as strings,
as JSON does not have an integer type long enough to store the value. However,
on 32-bit systems, a signed long may overflow for some portion of the
timestamp.
This patch corrects the overflow by formatting the timestamps as unsigned
longs.
........
Merged revisions 430840 from http://svn.asterisk.org/svn/asterisk/branches/13
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@430841 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Prior to this changeset, posting to the: /ari/bridges/{bridgeId} endpoint without specifying a value for the [name] query parameter, would crash Asterisk if the bridge you are attempting to create (or update) had the same ID as an existing bridge. The internal mechanism of the POST operation interpreted a null value for name, thus resulting in an error condition that crashed Asterisk.
ASTERISK-24560 #close
Reported By: Kinsey Moore
Review: https://reviewboard.asterisk.org/r/4349/
........
Merged revisions 430818 from http://svn.asterisk.org/svn/asterisk/branches/13
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@430820 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Calling ast_channel_bridge_peer() cannot be done while holding any channel
locks. The reported issue hit the deadlock in chan_iax2, but an audit of
the ast_channel_bridge_peer() calls found three more locations where the
same deadlock can occur.
* Made CHANNEL(peer), res_fax, and the SNMP agent not call
ast_channel_bridge_peer() with any channel locked. For CHANNEL(peer) I
had to rework the logic to not hold the channel lock.
* Made chan_iax2 no longer call ast_channel_bridge_peer(). It was done
for legacy reasons that no longer apply.
* Removed the iax.conf forcejitterbuffer option. It is now always enabled
when the jitterbuffer option is enabled. If you put a jitter buffer on a
channel it will be on the channel.
ASTERISK-24600 #close
Reported by: Jeff Collell
Review: https://reviewboard.asterisk.org/r/4342/
........
Merged revisions 430817 from http://svn.asterisk.org/svn/asterisk/branches/13
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@430819 65c4cc65-6c06-0410-ace0-fbb531ad65f3
On Debian based systems, the install_prereq tool uses a search command on
Debian that results in selecting both 64-bit and 32-bit packages. Besides the
waste of disk space, this can actually cause aptitude use 100% of memory on a
VM with 1GB of RAM as it tried to work out all of the 32-bit package
dependencies.
This patch filters out the 32-bit packages on a 64-bit machine, and leaves
32-bit machines alone.
ASTERISK-24048 #close
Reported by: Ben Klang
Tested by: Ben Klang, Matt Jordan
patches:
install_prereq_64-bit_compat.patch uploaded by Ben Klang (License 5876)
........
Merged revisions 430798 from http://svn.asterisk.org/svn/asterisk/branches/11
........
Merged revisions 430799 from http://svn.asterisk.org/svn/asterisk/branches/13
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@430800 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When using ODBC or IMAP storage, temporary files created on the file system
must be disposed of using the DISPOSE macro. The DELETE macro will map to a
deletion function for the backend storage, but does not clean up any local
files created as a result of the operation.
When using voicemail with the operator and review options enabled, pressing
0 to enter the menu, followed by 1 to save the message, followed by any
other DTMF press to delete the message, will result in the temporary file
lingering on the file system.
This patch properly calls DISPOSE after the DELETE. This causes the local
file to be disposed of.
ASTERISK-24288 #close
Reported by: LEI FU
patches:
voicemail_odbc_review_fix.diff uploaded by LEI FU (License 6640)
........
Merged revisions 430795 from http://svn.asterisk.org/svn/asterisk/branches/11
........
Merged revisions 430796 from http://svn.asterisk.org/svn/asterisk/branches/13
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@430797 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When a hint gets created, any subsequent device or presence
state changes result in extension status events getting sent
out to interested parties. However, at the time of hint creation,
no such event gets sent out, so watchers of extension state are
potentially left in the dark until the first state change after
hint creation.
Patch contributed by John Hardin (License #6512)
........
Merged revisions 430776 from http://svn.asterisk.org/svn/asterisk/branches/13
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@430777 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The first thing this patch fixes is UAS dialogs. Previously if a transport was
configured on an endpoint and an inbound session was created there was no guarantee
that requests sent on the dialog would use the correct transport and address
information. This has now been fixed so an explicitly configured transport
is taken into account.
The second thing this patch fixes is res_pjsip_multihomed. The res_pjsip_multihomed
module attempts to determine what transport a message should go out on and what
addressing information should go into the message itself. In a scenario where
multiple transports exist bound to the same IP address but a different port the
code would incorrectly alter the transport and change the message to the wrong
transport. This change makes the res_pjsip_multihomed module smarter so it will
only change the transport and address information in the message when it is
possible and makes sense.
ASTERISK-24615 #close
Reported by: David Justl
Review: https://reviewboard.asterisk.org/r/4331/
........
Merged revisions 430755 from http://svn.asterisk.org/svn/asterisk/branches/13
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@430756 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Different clients react differently to being told that a blind transfer
has failed. Some will simply send a BYE and be done with it. Others will
attempt to reinvite themselves back onto the call.
In the latter case, we were creating a new channel and then leaving it to
sit forever doing nothing. With this code change, that new channel will
not be created and the dialog with the transferring channel will be cleaned
up properly.
ASTERISK-24624 #close
Reported by Zane Conkle
Review: https://reviewboard.asterisk.org/r/4339
........
Merged revisions 430714 from http://svn.asterisk.org/svn/asterisk/branches/13
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@430715 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When FAX was developed, apparently the faxregistry.container used to be a
linked list that was converted to an ao2 container. Some of the
replacement ao2 container operations still had explicit lock/unlocks
around them.
Three off nominal code paths in res_fax.c and res_fax_spandsp.c unlock the
channel even though the routine did not lock the channel and other code
paths in the routine do not unlock the channel.
Review: https://reviewboard.asterisk.org/r/4340/
........
Merged revisions 430687 from http://svn.asterisk.org/svn/asterisk/branches/13
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@430688 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Due to the split of outbound registration state from configuration it is possible during
a reload for a "pjsip show registrations" CLI command to be executed which gets an older
snapshot of the configuration. This configuration may include outbound registrations which
have been removed due to a reload operation occurring at the same time. The code for
printing the outbound registration did not take this into account but now it does.
AST-1506 #close
Review: https://reviewboard.asterisk.org/r/4338/
........
Merged revisions 430664 from http://svn.asterisk.org/svn/asterisk/branches/13
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@430665 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The Asterisk 13 configure.ac checks for HAS_WORKING_SEMAPHORE but does not have
an option for cross-compiling so it fails with an exit. Since we're cross-
compiling, we can't exactly go looking for the header. The semaphore.h header
is relatively common:
* It's part of the POSIX standard
* It's part of GNU C Library
As such, we assume that it will be present when cross-compiling.
As such, this patch defaults "HAS_WORKING_SEMAPHORE" to "1" if cross-compiling
is detected.
If you're cross-compiling to a platform that doesn't support this, then make
sure you re-define this to 0.
ASTERISK-24663 #close
Reported by: abelbeck
patches:
asterisk-13-anonymous-semaphores.patch uploaded by abelbeck (License 5903)
........
Merged revisions 430646 from http://svn.asterisk.org/svn/asterisk/branches/13
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@430647 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The res_pjsip module was previously unloadable. With this patch it can now
be unloaded.
This patch is based off the original patch on the issue (listed below) by Corey
Farrell with a few modifications. Namely, removed a few changes not required to
make the module unloadable and also fixed a bug that would cause asterisk to
crash on unloading.
This patch is the first step (should hopefully be followed by another/others at
some point) in allowing res_pjsip and the modules that depend on it to be
unloadable. At this time, res_pjsip and some of the modules that depend on
res_pjsip cannot be unloaded without causing problems of some sort.
The goal of this patch is to get res_pjsip and only res_pjsip to be able to
unload successfully and/or shutdown without incident (crashes, leaks, etc...).
Other dependent modules may still cause problems on unload.
Basically made sure, with the patch applied, that res_pjsip (with no other
dependent modules loaded) could be succesfully unloaded and Asterisk could
shutdown without any leaks or crashes that pertained directly to res_pjsip.
ASTERISK-24485 #close
Reported by: Corey Farrell
Review: https://reviewboard.asterisk.org/r/4311/
patches:
pjsip_unload-broken-r1.patch submitted by Corey Farrell (license 5909)
........
Merged revisions 430628 from http://svn.asterisk.org/svn/asterisk/branches/13
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@430629 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The code was missing the case for explicitly destroying an outbound publication
when Asterisk had never actually published anything. The result was that Asterisk
would hang for a while on a graceful shutdown.
With this change, the case is taken into account, and on a graceful shutdown, these
publications are destroyed without the need to actually send a PUBLISH request.
ASTERISK-24655 #close
Reported by Kevin Harwell
Review: https://reviewboard.asterisk.org/r/4325
........
Merged revisions 430608 from http://svn.asterisk.org/svn/asterisk/branches/13
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@430609 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The mkpkgconfig script incorrectly concatenates Cflags options together. As an
example, the following:
Cflags: -I/usr/include/libxml2 -g3
Is instead generated as:
Cflags: -I/usr/include/libxml2-g3
This patch corrects the generation of Cflags in mkpkgconfig such that the
Cflags options are output correctly.
Review: https://reviewboard.asterisk.org/r/3707/
ASTERISK-23991 #close
Reported by: Diederik de Groot
patches:
fix_mkpkgconfig.diff uploaded by Diederik de Groot (License 6600)
........
Merged revisions 430589 from http://svn.asterisk.org/svn/asterisk/branches/11
........
Merged revisions 430590 from http://svn.asterisk.org/svn/asterisk/branches/13
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@430591 65c4cc65-6c06-0410-ace0-fbb531ad65f3
v11: If a channel redirect to a macro exten of a macro that is active
happens, the redirect location doesn't get executed. Instead the original
macro location is restored and gets reexecuted.
v13: An additional effect happens if a parked call times out to an
extension in the macro that parked the call then the macro is reexecuted
instead of the expected park return location.
* Made not restore the macro calling location on an
AST_SOFTHANGUP_ASYNCGOTO.
* Increased the locked channel range when setting up the macro execution
environment to cover things that should be done while the channel is
locked.
* Removed unnecessary NULL tests before calling ast_free() in
_macro_exec().
ASTERISK-23850 #close
Reported by: Andrew Nagy
Review: https://reviewboard.asterisk.org/r/4292/
........
Merged revisions 430564 from http://svn.asterisk.org/svn/asterisk/branches/11
........
Merged revisions 430565 from http://svn.asterisk.org/svn/asterisk/branches/13
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@430567 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The 'pjsip_get_dest_info' function is used to determine if the signaling transport
of the dialog is secure or not. This function was added in PJSIP 2.3 and does not
exist in earlier versions.
This configure check allows Asterisk to build and run with older versions at the
loss of the 'secure' argument for the PJSIP CHANNEL dialplan function. Usage of
this argument will require upgrading to PJSIP 2.3.
ASTERISK-24665 #close
Reported by: Mark Michelson
Review: https://reviewboard.asterisk.org/r/4329/
........
Merged revisions 430546 from http://svn.asterisk.org/svn/asterisk/branches/13
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@430547 65c4cc65-6c06-0410-ace0-fbb531ad65f3
* Reverted the change to astman_send_listack() to not use the listflag
parameter and always set the value to "Start" so the start capitalization
is consistent. Unfortunately changing the case of a returned value is not
a backward compatible change so for now FAXSessions is going to have to
remain inconsistent with all of the other AMI list actions.
* Reverted the minor protocol error fix in action_getconfig() when no
requested categories are found. Each line needs to be formatted as
"Header: text".
Caught by the testsuite.
ASTERISK-24049
........
Merged revisions 430528 from http://svn.asterisk.org/svn/asterisk/branches/13
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@430529 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The sample config was missing the configuration options for DTMF attended
transfer completion scenarios. The configuration options 'atxferabort',
'atxfercomplete', 'atxferthreeway', and 'atxferswap' are now documented in the
appropriate configuration file.
ASTERISK-24678 #close
Reported by: Niklas Larsson
patches:
features.conf.sample.diff uploaded by Niklas Larsson (License 5068)
........
Merged revisions 430526 from http://svn.asterisk.org/svn/asterisk/branches/13
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@430527 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The security event log uses a dynamic log level (SECURITY) that is registered
with the Asterisk logging core. Unfortunately, the syslog would ignore log
statements that had a dynamic log level associated with them. Because the
syslog cannot handle ad hoc dynamic log levels, this patch treats any dynamic
log entries sent to the syslog as logs with a level of NOTICE.
ASTERISK-20744 #close
Reported by: Michael Keuter
Tested by: Michael L. Young, Jacek Konieczny
patches:
asterisk-20744-syslog-dynamic-logging_trunk.diff uploaded by Michael L. Young (license 5026)
........
Merged revisions 430506 from http://svn.asterisk.org/svn/asterisk/branches/11
........
Merged revisions 430507 from http://svn.asterisk.org/svn/asterisk/branches/13
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@430508 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When the channel datastore associated with the usage of CURLOPT on a specific
channel is freed, the underlying structure holding the list of options is not
disposed of. This patch properly frees the structure in the datastore .destroy
callback.
ASTERISK-24672 #close
Reported by: Kristian Hogh
patches:
func_curl-memory-leak.diff uploaded by Kristian Hogh (License 6639)
........
Merged revisions 430487 from http://svn.asterisk.org/svn/asterisk/branches/11
........
Merged revisions 430488 from http://svn.asterisk.org/svn/asterisk/branches/13
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@430489 65c4cc65-6c06-0410-ace0-fbb531ad65f3
General improvements to SIP to PJSIP conversion utility:
1) track default section of input file to allow parsing
an include file that doesn't specify a [section]
2) informatively handle case of assignment without [section]
3) correctly handle getting sections from included files
- [section]'s are inherited by included file
4) provide null string as default transport bind ip
5) gracefully handle missing portions of registration string
6) denote steps of operation during conversion and confirm
top level files as a convenience
ASTERISK-24474 #close
Review: https://reviewboard.asterisk.org/r/4280/
Reported by: John Kiniston
........
Merged revisions 430469 from http://svn.asterisk.org/svn/asterisk/branches/13
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@430470 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When app_bridge grabs a channel and puts it into
a bridge, the channel should then continue where
it left off in the dialplan after the bridge has
ended. Although it stores the current dialplan
location as an after bridge goto on the channel,
it was executing the same priority again instead
of going to the next priority. By swapping the
"specific" version of bridge_set_after_goto with
bridge_set_after_go_on, the next priority in the
dialplan is executed instead.
ASTERISK-24637 #close
Review: https://reviewboard.asterisk.org/r/4322/
Reported by: John Bigelow
........
Merged revisions 430467 from http://svn.asterisk.org/svn/asterisk/branches/13
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@430468 65c4cc65-6c06-0410-ace0-fbb531ad65f3
* Made the following AMI actions use list API calls for consistency:
Agents
BridgeInfo
BridgeList
BridgeTechnologyList
ConfbridgeLIst
ConfbridgeLIstRooms
CoreShowChannels
DAHDIShowChannels
DBGet
DeviceStateList
ExtensionStateList
FAXSessions
Hangup
IAXpeerlist
IAXpeers
IAXregistry
MeetmeList
MeetmeListRooms
MWIGet
ParkedCalls
Parkinglots
PJSIPShowEndpoint
PJSIPShowEndpoints
PJSIPShowRegistrationsInbound
PJSIPShowRegistrationsOutbound
PJSIPShowResourceLists
PJSIPShowSubscriptionsInbound
PJSIPShowSubscriptionsOutbound
PresenceStateList
PRIShowSpans
QueueStatus
QueueSummary
ShowDialPlan
SIPpeers
SIPpeerstatus
SIPshowregistry
SKINNYdevices
SKINNYlines
Status
VoicemailUsersList
* Incremented the AMI version to 2.7.0.
* Changed astman_send_listack() to not use the listflag parameter and
always set the value to "Start" so the start capitalization is consistent.
i.e., The FAXSessions used "Start" while the rest of the system used
"start". The corresponding complete event always used "Complete".
* Fixed ami_show_resource_lists() "PJSIPShowResourceLists" to output the
AMI ActionID for all of its list events.
* Fixed off-nominal AMI protocol error in manager_bridge_info(),
manager_parking_status_single_lot(), and
manager_parking_status_all_lots(). Use of astman_send_error() after
responding to the original AMI action request violates the action response
pattern by sending two responses.
* Fixed minor protocol error in action_getconfig() when no requested
categories are found. Each line needs to be formatted as "Header: text".
* Fixed off-nominal memory leak in manager_build_parked_call_string().
* Eliminated unnecessary use of RAII_VAR() in ami_subscription_detail().
ASTERISK-24049 #close
Reported by: Jonathan Rose
Review: https://reviewboard.asterisk.org/r/4315/
........
Merged revisions 430434 from http://svn.asterisk.org/svn/asterisk/branches/13
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@430435 65c4cc65-6c06-0410-ace0-fbb531ad65f3
If you do a 'core (shutdown|restart) graceful' persistent subscriptions won't
survive. If you do a 'core (shutdown|restart) now' or asterisk terminates for
some reason, they do. Here's why...
When asterisk shuts down gracefully, it sends a 'NOTIFY/terminated' to
subscribers for each subscription. This not only tells the subscribers that the
dialog/state machine is done, it also frees the last reference to the
subscription tree which causes the persistent subscription to get deleted from
astdb. When asterisk restarts, nothing's left. Just preventing the delete from
astdb doesn't work because we already told the subscriber to terminate the
dialog so we can't restart it even if it was still in astdb. Everything works
OK if asterisk terminates unexpectedly because we never send the 'terminated'
message so on restart, the subscription is still in astdb and the subscriber is
none the wiser.
This patch suppresses the sending of 'NOTIFY/terminated' on shutdown for
persistent connections.
Tested-by: George Joseph
Review: https://reviewboard.asterisk.org/r/4318/
........
Merged revisions 430397 from http://svn.asterisk.org/svn/asterisk/branches/13
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@430398 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Every time a registration started, sip_outbound_registration_response_cb bumps
the ref count on client_state then pushes a handle_registration_response task.
handle_registration_response never unreffed it though. So every time a
registration goes out, the ref count goes up by one.
This patch adds the unreffs to handle_registration_response.
Tested-by: George Joseph
Review: https://reviewboard.asterisk.org/r/4303/
........
Merged revisions 430395 from http://svn.asterisk.org/svn/asterisk/branches/13
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@430396 65c4cc65-6c06-0410-ace0-fbb531ad65f3
There are 2 issues with reloading registrations...
1. The 'can_reuse_registration' test wasn't considering the intervals or
expiration in its determination of whether a registration changed or not so if
you changed any of the intervals or the expiration and reloaded, the object
would get reloaded but the actual timers wouldn't change.
can_reuse_registration now does a sorcery diff on the old and new objects
instead of discretely testing certain fields. Now if you change expiration for
instance, and reload, the timer is updated and re-registration will occur on the
new value.
2. If you mung up your password on an outbound registration you get a permanent
failure. If you fix the password (on the outbound_auth object) and reload,
nothing tells outbound_registration to try again because the registration itself
didn't change. This patch adds an observer on the "auth" object type and if any
auth changes, existing registration states are searched and those in a
REJECTED_PERMANENT state are retried.
Tested-by: George Joseph
Review: https://reviewboard.asterisk.org/r/4304/
........
Merged revisions 430373 from http://svn.asterisk.org/svn/asterisk/branches/13
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@430374 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When the AMI Redirect action is used with a channel bridged inside
Stasis() and not running a pbx, the channel is hung up instead of
proceeding to the desired location in dialplan. This change allows
such channels to be Redirected properly by detecting the operation
used by Redirect (ASYNCGOTO) and using the code already established
for functionality of the ARI channel continue operation.
ASTERISK-24591 #close
Review: https://reviewboard.asterisk.org/r/4271/
........
Merged revisions 430355 from http://svn.asterisk.org/svn/asterisk/branches/13
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@430356 65c4cc65-6c06-0410-ace0-fbb531ad65f3
With this patch, the following two ARI commands
POST /channels
POST /channels/{id}/continue
Accept a new parameter, label, that can be used to continue to or originate
to a priority label in the dialplan.
Because this is adding a new parameter to ARI commands, the API version of
ARI has been bumped from 1.6.0 to 1.7.0.
This patch comes courtesy of Nir Simionovich from Greenfield Tech. Thanks!
ASTERISK-24412 #close
Reported by Nir Simionovich
Review: https://reviewboard.asterisk.org/r/4285
........
Merged revisions 430337 from http://svn.asterisk.org/svn/asterisk/branches/13
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@430338 65c4cc65-6c06-0410-ace0-fbb531ad65f3