This gets rid of most old libc free/malloc/realloc and replaces them
with ast_free and friends. When compiling with MALLOC_DEBUG you'll
notice it when you're mistakenly using one of the libc variants. For
the legacy cases you can define WRAP_LIBC_MALLOC before including
asterisk.h.
Even better would be if the errors were also enabled when compiling
without MALLOC_DEBUG, but that's a slightly more invasive header
file change.
Those compiling addons/format_mp3 will need to rerun
./contrib/scripts/get_mp3_source.sh.
ASTERISK-24348 #related
Review: https://reviewboard.asterisk.org/r/4015/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@423978 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch gives the optional ability to keep queue rules in RealTime. It is
important to note that with this patch:
(a) Queue rules in RealTime are only examined on module load/reload
(b) Queue rules are loaded both from the queuerules.conf file as well as the
RealTime backend
To inform app_queue to examine RealTime for queue rules, a new setting has been
added to queuerules.conf's general section "realtime_rules". RealTime queue
rules will only be used when this setting is set to "yes".
The schema for the database table supports a rule_name, time, min_penalty, and
max_penalty columns. min_penalty and max_penalty can be relative, if a '-' or
'+' literal is provided. Otherwise, the penalties are treated as constants.
For example:
rule_name, time, min_penalty, max_penalty
'default', '10', '20', '30'
'test2', '20', '30', '55'
'test2', '25', '-11', '+1111'
'test2', '400', '112', '333'
'test3', '0', '4564', '46546'
'test_rule', '40', '15', '50'
which would result in :
Rule: default
- After 10 seconds, adjust QUEUE_MAX_PENALTY to 30 and adjust
QUEUE_MIN_PENALTY to 20
Rule: test2
- After 20 seconds, adjust QUEUE_MAX_PENALTY to 55 and adjust
QUEUE_MIN_PENALTY to 30
- After 25 seconds, adjust QUEUE_MAX_PENALTY by 1111 and adjust
QUEUE_MIN_PENALTY by -11
- After 400 seconds, adjust QUEUE_MAX_PENALTY to 333 and adjust
QUEUE_MIN_PENALTY to 112
Rule: test3
- After 0 seconds, adjust QUEUE_MAX_PENALTY to 46546 and adjust
QUEUE_MIN_PENALTY to 4564
Rule: test_rule
- After 40 seconds, adjust QUEUE_MAX_PENALTY to 50 and adjust
QUEUE_MIN_PENALTY to 15
If you use RealTime, the queue rules will be always reloaded on a module
reload, even if the underlying file did not change. With the option disabled,
the rules will only be reloaded if the file was modified.
Review: https://reviewboard.asterisk.org/r/3607/
ASTERISK-23823 #close
Reported by: Michael K
patches:
app_queue.c_realtime_trunk.patch uploaded by Michael K (License 6621)
........
Merged revisions 420624 from http://svn.asterisk.org/svn/asterisk/branches/13
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@420625 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This introduces stasis.conf and a mechanism to prevent certain message
types from being published. Internally, this works by preventing the
chosen message types from being created which ensures that those
message types can never be published. This patch also adjusts message
publishers such that message payloads are not created if the related
message type is not available.
ASTERISK-23943 #close
Review: https://reviewboard.asterisk.org/r/3823/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@420124 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The previous behavior was to simply set the accountcode of an outgoing
channel to the accountcode of the channel initiating the call. It was
done this way a long time ago to allow the accountcode set on the SIP/100
channel to be propagated to a local channel so the dialplan execution on
the Local;2 channel would have the SIP/100 accountcode available.
SIP/100 -> Local;1/Local;2 -> SIP/200
Propagating the SIP/100 accountcode to the local channels is very useful.
Without any dialplan manipulation, all channels in this call would have
the same accountcode.
Using dialplan, you can set a different accountcode on the SIP/200 channel
either by setting the accountcode on the Local;2 channel or by the Dial
application's b(pre-dial), M(macro) or U(gosub) options, or by the
FollowMe application's b(pre-dial) option, or by the Queue application's
macro or gosub options. Before Asterisk v12, the altered accountcode on
SIP/200 will remain until the local channels optimize out and the
accountcode would change to the SIP/100 accountcode.
Asterisk v1.8 attempted to add peeraccount support but ultimately had to
punt on the support. The peeraccount support was rendered useless because
of how the CDR code needed to unconditionally force the caller's
accountcode onto the peer channel's accountcode. The CEL events were thus
intentionally made to always use the channel's accountcode as the
peeraccount value.
With the arrival of Asterisk v12, the situation has improved somewhat so
peeraccount support can be made to work. Using the indicated example, the
the accountcode values become as follows when the peeraccount is set on
SIP/100 before calling SIP/200:
SIP/100 ---> Local;1 ---- Local;2 ---> SIP/200
acct: 100 \/ acct: 200 \/ acct: 100 \/ acct: 200
peer: 200 /\ peer: 100 /\ peer: 200 /\ peer: 100
If a channel already has an accountcode it can only change by the
following explicit user actions:
1) A channel originate method that can specify an accountcode to use.
2) The calling channel propagating its non-empty peeraccount or its
non-empty accountcode if the peeraccount was empty to the outgoing
channel's accountcode before initiating the dial. e.g., Dial and
FollowMe. The exception to this propagation method is Queue. Queue will
only propagate peeraccounts this way only if the outgoing channel does not
have an accountcode.
3) Dialplan using CHANNEL(accountcode).
4) Dialplan using CHANNEL(peeraccount) on the other end of a local
channel pair.
If a channel does not have an accountcode it can get one from the
following places:
1) The channel driver's configuration at channel creation.
2) Explicit user action as already indicated.
3) Entering a basic or stasis-mixing bridge from a peer channel's
peeraccount value.
You can specify the accountcode for an outgoing channel by setting the
CHANNEL(peeraccount) before using the Dial, FollowMe, and Queue
applications. Queue adds the wrinkle that it will not overwrite an
existing accountcode on the outgoing channel with the calling channels
values.
Accountcode and peeraccount values propagate to an outgoing channel before
dialing. Accountcodes also propagate when channels enter or leave a basic
or stasis-mixing bridge. The peeraccount value only makes sense for
mixing bridges with two channels; it is meaningless otherwise.
* Made peeraccount functional by changing accountcode propagation as
described above.
* Fixed CEL extracting the wrong ie value for the peeraccount. This was
done intentionally in Asterisk v1.8 when that version had to punt on
peeraccount.
* Fixed a few places dealing with accountcodes that were reading from
channels without the lock held.
AFS-65 #close
Review: https://reviewboard.asterisk.org/r/3601/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@419520 65c4cc65-6c06-0410-ace0-fbb531ad65f3
During some performance testing of Asterisk with AGI, ARI, and lots of Local
channels, we noticed that there's quite a hit in performance during channel
creation and releasing to the dialplan (ARI continue). After investigating
the performance spike that occurs during channel creation, we discovered
that we create a lot of channel snapshots that are technically unnecessary.
This includes creating snapshots during:
* AGI execution
* Returning objects for ARI commands
* During some Local channel operations
* During some dialling operations
* During variable setting
* During some bridging operations
And more.
This patch does the following:
- It removes a number of fields from channel snapshots. These fields were
rarely used, were expensive to have on the snapshot, and hurt performance.
This included formats, translation paths, Log Call ID, callgroup, pickup
group, and all channel variables. As a result, AMI Status,
"core show channel", "core show channelvar", and "pjsip show channel" were
modified to either hit the live channel or not show certain pieces of data.
While this is unfortunate, the performance gain from this patch is worth
the loss in behaviour.
- It adds a mechanism to publish a cached snapshot + blob. A large number of
publications were changed to use this, including:
- During Dial begin
- During Variable assignment (if no AMI variables are emitted - if AMI
variables are set, we have to make snapshots when a variable is changed)
- During channel pickup
- When a channel is put on hold/unhold
- When a DTMF digit is begun/ended
- When creating a bridge snapshot
- When an AOC event is raised
- During Local channel optimization/Local bridging
- When endpoint snapshots are generated
- All AGI events
- All ARI responses that return a channel
- Events in the AgentPool, MeetMe, and some in Queue
- Additionally, some extraneous channel snapshots were being made that were
unnecessary. These were removed.
- The result of ast_hashtab_hash_string is now cached in stasis_cache. This
reduces a large number of calls to ast_hashtab_hash_string, which reduced
the amount of time spent in this function in gprof by around 50%.
#ASTERISK-23811 #close
Reported by: Matt Jordan
Review: https://reviewboard.asterisk.org/r/3568/
........
Merged revisions 416211 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@416216 65c4cc65-6c06-0410-ace0-fbb531ad65f3
In app_queue, device state changes arrive in event messages and
update the queue member status value. That value is checked in
get_member_status() to decide that the caller should leave when
there are no available members. Although event messages can be
delayed by other activity, there is no adverse affect by lagged
status except in one specific case: there is only one available
member, it was just rung, and leavewhenempty is enabled set for
ringing members. This change adds a direct check of the device
state only under this condition where the caller may be dropped
incorrectly, resolving this issue without affecting performance
of app_queue normally.
AST-1248 #close
Review: https://reviewboard.asterisk.org/r/3595/
Reported by: Thomas Arimont
........
Merged revisions 415833 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 415835 from http://svn.asterisk.org/svn/asterisk/branches/11
........
Merged revisions 415836 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@415839 65c4cc65-6c06-0410-ace0-fbb531ad65f3
* Fixed ast_channel_publish_dial_forward() not locking the forwarded
channel when taking the channel snapshot.
* Fixed app_dial.c:do_forward() using the wrong channel to get the
original call forwarding string.
* Removed unnecessary locking when calling ast_channel_publish_dial() and
ast_channel_publish_dial_forward() in app_dial and app_queue. Holding
channel locks when calling ast_channel_publish_dial_forward() with a
forwarded channel could result in pausing the system while the stasis bus
completes processsing a forwarded channel subscription.
Review: https://reviewboard.asterisk.org/r/3451/
........
Merged revisions 412579 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@412580 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Add an option to enable a periodic beep to be played into a call if it
is being recorded. If enabled, it uses the PERIODIC_HOOK() function
internally to play the 'beep' prompt into the call at a specified
interval. This option is provided for both Monitor() and
MixMonitor().
Review: https://reviewboard.asterisk.org/r/3424/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@412427 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Much needed was a way to assign id to objects on creation, and
much change was necessary to accomplish it. Channel uniqueids
and linkedids are split into separate string and creation time
components without breaking linkedid propgation. This allowed
the uniqueid to be specified by the user interface - and those
values are now carried through to channel creation, adding the
assignedids value to every function in the chain including the
channel drivers. For local channels, the second channel can be
specified or left to default to a ;2 suffix of first. In ARI,
bridge, playback, and snoop objects can also be created with a
specified uniqueid.
Along the way, the args order to allocating channels was fixed
in chan_mgcp and chan_gtalk, and linkedid is no longer lost as
masquerade occurs.
(closes issue ASTERISK-23120)
Review: https://reviewboard.asterisk.org/r/3191/
........
Merged revisions 410157 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@410158 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Fixes typos of "transfered" instead of "transferred" in various code. Fixes incorrect gosub param help text for app_queue.
Fixes Asterisk man pages containing unquoted minus signs. Adds note about the "textsupport" option in sip.conf.sample.
(issue ASTERISK-23061)
(issue ASTERISK-23028)
(issue ASTERISK-23046)
(issue ASTERISK-23027)
(closes issue ASTERISK-23061)
(closes issue ASTERISK-23028)
(closes issue ASTERISK-23046)
(closes issue ASTERISK-23027)
Reported by: Eugene, Jeremy Laine, Denis Pantsyrev
Patches:
transferred.patch uploaded by Jeremy Laine (license 6561)
hyphen.patch uploaded by Jeremy Laine (license 6561)
sip.conf.sample.patch uploaded by Eugene (license 6360)
........
Merged revisions 405791 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 405792 from http://svn.asterisk.org/svn/asterisk/branches/11
........
Merged revisions 405829 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@405830 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Original commit message by mmichelson (asterisk 12 r403311):
"This adds channel locks around calls to create channel snapshots as well
as other functions which operate on a channel and then end up
creating a channel snapshot. Functions that expect the channel to be
locked prior to being called have had their documentation updated to
indicate such."
The above was initially committed and then reverted at r403398. The problem
was found to be in core_local.c in the publish_local_bridge_message function.
The ast_unreal_lock_all function locks and adds a reference to the returned
channels and while they were being unlocked they were not being unreffed when
no longer needed. Fixed by unreffing the channels.
Also in bridge.c a lock was obtained on "other->chan", but then an attempt was
made to unlock "other" and not the previously locked channel. Fixed by
unlocking "other->chan"
(closes issue ASTERISK-22709)
Reported by: John Bigelow
........
Merged revisions 404237 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@404260 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This change adds an event for when an originated call is redirected to
another target. This event contains the original channel and the newly
created channel. If a stasis subscription exists on the original originated
channel for a stasis application then a new subscription will also be
created on the stasis application to the redirected channel. This allows
the application to follow the call path completely.
(closes issue ASTERISK-22719)
Reported by: Joshua Colp
Review: https://reviewboard.asterisk.org/r/3054/
........
Merged revisions 403808 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@403810 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This adds channel locks around calls to create channel snapshots as well
as other functions which operate on a channel and then end up
creating a channel snapshot. Functions that expect the channel to be
locked prior to being called have had their documentation updated to
indicate such.
........
Merged revisions 403311 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@403314 65c4cc65-6c06-0410-ace0-fbb531ad65f3
If the first agent/member (via CLI "queue show") in a queue is "busy" (dnd,
circuit busy, etc...) and no agents answered then app_queue would crash.
This occurred because while the calling of agent(s) remained valid the channel
on "busy" agent would be set to NULL and then later dereferenced upon a second
"rna" function call. The original intention of the code is to have only valid
"call attempt" objects (channels != NULL) checked while attempting to call
agent(s). It does this by building a "call_next" list of valid "call attempt"
objects. In the case of the "busy" agent subsequent builds of the valid "call
attempt" list would sometimes include (the case mentioned above) an invalid
"call attempt" object.
The fix was to make sure the "call attempt" list was appropriately built on
every iteration. A NULL sanity check was also added at the original offending
spot of the crash just in case another one slipped by somehow.
(closes issue ASTERISK-22644)
Reported by: Marco Signorini
Review: https://reviewboard.asterisk.org/r/2983/
........
Merged revisions 402517 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@402518 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The queue_log entry resulting from CLI "queue remove member" when
log_membername_as_agent is enabled is wrong. It always uses the interface
name instead of the member name in the queue_log entry.
* Get the queue member before removing it from the queue so the member
name is available for the queue_log entry.
(closes issue ASTERISK-21826)
Reported by: Oscar Esteve
Patches:
fix_membername.diff (license #6505) patch uploaded by Oscar Esteve
(modified to fix potential ref leak)
........
Merged revisions 401433 from http://svn.asterisk.org/svn/asterisk/branches/11
........
Merged revisions 401434 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@401435 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The https://reviewboard.asterisk.org/r/2888/ review changes manager to not
subscribe to stasis when it is disabled for performance reasons. When
manager is disabled app_queue and res_agi decline to load and fail to
clean up what they have already allocated.
* Made app_queue and res_agi clean up allocated resources when they
decline to load.
* Made app_queue and res_agi use their own subscriptions to the stasis
topics instead of borrowing manager's message router structure
inappropriately.
(closes issue ASTERISK-22604)
Reported by: rmudgett
Review: https://reviewboard.asterisk.org/r/2902/
........
Merged revisions 400671 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@400672 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Commit r62462 added two extra fields for logging "the original position the
caller entered the queue at, and the amount of time the caller was waiting in
the queue." But when r75969 was merged from 1.4 into trunk (r75977), these two
fields disappeared. Those two extra fields were not logged in 1.4 and when the
patch was merged, those fields went away.
Therefore, this is a regression and was caught by the reporter because he was
reading the awesome "Asterisk: The Definitive Guide" book.
(closes issue ASTERISK-22197)
Reported by: Dalius M.
Tested by: Dalius M.
Patches:
asterisk-22197-q-log-exitwithkey.diff
uploaded by Michael L. Young (license 5026)
Review: https://reviewboard.asterisk.org/r/2901/
........
Merged revisions 400622 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 400623 from http://svn.asterisk.org/svn/asterisk/branches/11
........
Merged revisions 400624 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@400625 65c4cc65-6c06-0410-ace0-fbb531ad65f3
........
r399887 | dlee | 2013-09-26 10:41:47 -0500 (Thu, 26 Sep 2013) | 1 line
Minor performance bump by not allocate manager variable struct if we don't need it
........
r400138 | dlee | 2013-09-30 10:24:00 -0500 (Mon, 30 Sep 2013) | 23 lines
Stasis performance improvements
This patch addresses several performance problems that were found in
the initial performance testing of Asterisk 12.
The Stasis dispatch object was allocated as an AO2 object, even though
it has a very confined lifecycle. This was replaced with a straight
ast_malloc().
The Stasis message router was spending an inordinate amount of time
searching hash tables. In this case, most of our routers had 6 or
fewer routes in them to begin with. This was replaced with an array
that's searched linearly for the route.
We more heavily rely on AO2 objects in Asterisk 12, and the memset()
in ao2_ref() actually became noticeable on the profile. This was
#ifdef'ed to only run when AO2_DEBUG was enabled.
After being misled by an erroneous comment in taskprocessor.c during
profiling, the wrong comment was removed.
Review: https://reviewboard.asterisk.org/r/2873/
........
r400178 | dlee | 2013-09-30 13:26:27 -0500 (Mon, 30 Sep 2013) | 24 lines
Taskprocessor optimization; switch Stasis to use taskprocessors
This patch optimizes taskprocessor to use a semaphore for signaling,
which the OS can do a better job at managing contention and waiting
that we can with a mutex and condition.
The taskprocessor execution was also slightly optimized to reduce the
number of locks taken.
The only observable difference in the taskprocessor implementation is
that when the final reference to the taskprocessor goes away, it will
execute all tasks to completion instead of discarding the unexecuted
tasks.
For systems where unnamed semaphores are not supported, a really
simple semaphore implementation is provided. (Which gives identical
performance as the original taskprocessor implementation).
The way we ended up implementing Stasis caused the threadpool to be a
burden instead of a boost to performance. This was switched to just
use taskprocessors directly for subscriptions.
Review: https://reviewboard.asterisk.org/r/2881/
........
r400180 | dlee | 2013-09-30 13:39:34 -0500 (Mon, 30 Sep 2013) | 28 lines
Optimize how Stasis forwards are dispatched
This patch optimizes how forwards are dispatched in Stasis.
Originally, forwards were dispatched as subscriptions that are invoked
on the publishing thread. This did not account for the vast number of
forwards we would end up having in the system, and the amount of work it
would take to walk though the forward subscriptions.
This patch modifies Stasis so that rather than walking the tree of
forwards on every dispatch, when forwards and subscriptions are changed,
the subscriber list for every topic in the tree is changed.
This has a couple of benefits. First, this reduces the workload of
dispatching messages. It also reduces contention when dispatching to
different topics that happen to forward to the same aggregation topic
(as happens with all of the channel, bridge and endpoint topics).
Since forwards are no longer subscriptions, the bulk of this patch is
simply changing stasis_subscription objects to stasis_forward objects
(which, admittedly, I should have done in the first place.)
Since this required me to yet again put in a growing array, I finally
abstracted that out into a set of ast_vector macros in
asterisk/vector.h.
Review: https://reviewboard.asterisk.org/r/2883/
........
r400181 | dlee | 2013-09-30 13:48:57 -0500 (Mon, 30 Sep 2013) | 28 lines
Remove dispatch object allocation from Stasis publishing
While looking for areas for performance improvement, I realized that an
unused feature in Stasis was negatively impacting performance.
When a message is sent to a subscriber, a dispatch object is allocated
for the dispatch, containing the topic the message was published to, the
subscriber the message is being sent to, and the message itself.
The topic is actually unused by any subscriber in Asterisk today. And
the subscriber is associated with the taskprocessor the message is being
dispatched to.
First, this patch removes the unused topic parameter from Stasis
subscription callbacks.
Second, this patch introduces the concept of taskprocessor local data,
data that may be set on a taskprocessor and provided along with the data
pointer when a task is pushed using the ast_taskprocessor_push_local()
call. This allows the task to have both data specific to that
taskprocessor, in addition to data specific to that invocation.
With those two changes, the dispatch object can be removed completely,
and the message is simply refcounted and sent directly to the
taskprocessor.
Review: https://reviewboard.asterisk.org/r/2884/
........
Merged revisions 399887,400138,400178,400180-400181 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@400186 65c4cc65-6c06-0410-ace0-fbb531ad65f3
app_queue currently attempts to handle Local channel optimizations in an effort
to provide accurate information in Stasis messages (and their corresponding
AMI events) as well as the Queue log. Sometimes, however, things don't go as
planned.
Consider the following scenario:
SIP/foo <-> L;1 <-> L;2 <-> SIP/agent
SIP/agent answers, triggering a Local channel optimization. app_queue will
normally do the following:
* Listen for the Local optimization events and update our agent accordingly
to SIP/agent in the queue log and messages
* When we get a hangup, publish the AgentComplete event based on our
information (SIP/foo and SIP/agent)
However, as with all things that depend on sanity from something as capricious
as Local channels, things can go wrong:
(1) SIP/agent immediately hangs up upon answering. This triggers a race
condition between termination messages coming from SIP/agent and the
ongoing Local channel optimization messages. (Note that this can also
occur with SIP/foo)
(2) In a race condition, Asterisk can (rarely) deliver the hangup messages
prior to the Local channel optimization.
In that case, the messages *may* arrive to app_queue in the following order:
* Hangup SIP/Agent
* Hangup SIP/foo
* Optimize L;1/L;2
* Hangup L;2
* Hangup L;1
When app_queue receives the hangup of the agent or the caller, it will attempt
to publish the AgentComplete event. However, it now has a problem - it thinks
its agent is the ;1 side of the Local channel, as it never received the
optimization event. At the same time, that channel is already gone. This
results in getting NULL from the Stasis cache. What's more, we can't really
wait for the optimization message, as we are currently handling the hangup
of the channel that the optimization event would tell us to use.
This patch modifies the behavior in app_queue such that, since we still have a
lot of pertinent queue information (interface, queue name, etc.), we now raise
the event with what information we know. The channels involved now may or may
not be present. Users will still at least get the "AgentComplete" event, which
"completes" the known Agent information.
Review: https://reviewboard.asterisk.org/r/2878/
(closes issue ASTERISK-22507)
Reported by: Richard Mudgett
........
Merged revisions 400060 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@400061 65c4cc65-6c06-0410-ace0-fbb531ad65f3
If the channel variable MONITOR_EXEC is set, app_queue will pass the specified
execution parameters to the MixMonitor application when a queue is recorded.
If that channel variable is not set, the buffer that holds the escaped value
was not being initialized to NULL, and so would be passed to the MixMonitor
application with garbage. Hilarity ensued as app_mixmonitor attempted to
execute gobeldy-gook.
........
Merged revisions 399681 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@399682 65c4cc65-6c06-0410-ace0-fbb531ad65f3
........
r397921 | mmichelson | 2013-08-29 10:42:10 -0500 (Thu, 29 Aug 2013) | 6 lines
Resolve assumptions that bridge snapshots would be non-NULL for transfer stasis events.
Attempting to transfer an unbridged call would result in crashes in either CEL code or
in the conversion to AMI messages.
........
r397922 | mmichelson | 2013-08-29 10:42:29 -0500 (Thu, 29 Aug 2013) | 3 lines
Remove extra debug message.
........
Merged revisions 397921-397922 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@397923 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This essentially makes app_queue usable again. From reviewboard:
* Reporting of transfers and call completion is done by creating stasis
subscriptions and listening for specific events in order to determine
when the call is finished (either via a transfer or hangup).
* Dial end messages have been added where they were previously missing.
* Queue stats are properly being updated again once calls have finished.
* AgentComplete stasis messages and AMI events are now occurring again.
* Mixmonitor starting has been factored into its own function and uses the
Mixmonitor API now instead of using ast_pbx_run()
In addition to the changes in app_queue, there are several supplementary changes as well:
* Queue logging now differentiates between attended and blind transfers. A
note about this is in the CHANGES file.
* Local channel optimization events now report more information. This
includes which of the two local channels involved is the destination of
the optimization, the channel that is replacing the destination local channel,
and an identifier so that begin and end events can be matched to each other.
The end events are now sent whether the optimization was successful or not and
includes an indicator of whether the optimization was successful.
* Changes were made to features and bridging_basic so that additional flags may
be set on a bridge. This is necessary because the queue requires that its
bridge only allows move-swap local channel optimizations into the bridge.
(closes issue ASTERISK-21517)
Reported by Matt Jordan
(closes issue ASTERISK-21943)
Reported by Matt Jordan
Review: https://reviewboard.asterisk.org/r/2694
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@397451 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Queue members who happen to be in multiple queues at the same time may not
have any wrap up time. This problem occurred due to a code change in Asterisk
11.3.0 that unified device state tracking of Queue members in multiple
Queues (which fixed some other problems, but unfortunately caused this one).
This patch fixes the behavior by having the is_member_available function
check the queue's wrap up time and the time of the member's last call, such
that for a particular queue, the member won't be considered available if their
last call is within the wrap up time.
(closes issue ASTERISK-22189)
Reported by: Tony Lewis
Tested by: Tony Lewis
........
Merged revisions 396948 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@396949 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This removes unused code, event types, IE pltypes, and event IE types
where possible and makes several functions private that were once
public. This includes a renumbering of the remaining event and IE types
which breaks binary compatibility with previous versions. The last
remaining consumers of the old event system (or parts thereof) are
main/security_events.c, res/res_security_log.c, tests/test_cel.c,
tests/test_event.c, main/cel.c, and the CEL backends.
Review: https://reviewboard.asterisk.org/r/2703/
(closes issue ASTERISK-22139)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@396887 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The rna() routine will raise a Stasis message involving both the caller and the
agent. This doesn't work so well if we already hung up the agent channel, as
the channel doesn't quite exist. Not surprisingly, this will crash. This patch
properly runs the rna subroutine (performing all of the Ring-No-Answer logic)
prior to hanging up the agent channel.
(closes issue ASTERISK-22258)
Reported by: Kiril Valchev
Tested by: Kiril Valchev
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@396365 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch adds the ability in Queue to raise a hint when a member's paused
state changes. The hint uses the form 'Queue:{queue_name}_pause_{member_name}',
where {queue_name} and {member_name} are the name of the queue and the name
of the member to subscribe to, respectively.
For example: exten => 8501,hint,Queue:sales_pause_mark.
Members will show as In Use when paused.
Note that the format of the queue pause hint was changed slightly from what
is on the issue to accomodate suggestion on the code review.
Review: https://reviewboard.asterisk.org/r/2254
(closes issue ASTERISK-20842)
Reported by: Philippe Lindheimer
patches:
qpause-10-378206.diff uploaded by Philippe Lindheimer (license 5519)
qpause-11-378206.diff uploaded by Philippe Lindheimer (license 5519)
qpause-trunk-378206.diff uploaded by Philippe Lindheimer (license 5519)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@396010 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This prevents XML documentation duplication by expanding channel and
bridge snapshot tags into channel and bridge snapshot parameter sets
with a given prefix or defaulting to no prefix. This also prevents
documentation from becoming fractured and out of date by keeping all
variations of the documentation in template form such that it only
needs to be updated once and keeps maintenance to a minimum.
Review: https://reviewboard.asterisk.org/r/2708/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@395985 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch renames the bridging* files to bridge*. This may seem pedantic
and silly, but it fits better in line with current Asterisk naming conventions:
* channel is not "channeling"
* monitor is not "monitoring"
etc.
A bridge is an object. It is a first class citizen in Asterisk. "Bridging" is
the act of using a bridge on a set of channels - and the API that fulfills that
role is more than just the action.
(closes issue ASTERISK-22130)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@395378 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This adds CEL support for blind and attended transfers and call pickup.
During the course of adding this functionality I noticed that
CONF_ENTER, CONF_EXIT, and BRIDGE_TO_CONF events are particularly
useless without a bridge identifier, so I added that as well.
This adds tests for blind transfers, several types of attended
transfers, and call pickup.
The extra field in CEL records now consists of a JSON blob whose fields
are defined on a per-event basis.
Review: https://reviewboard.asterisk.org/r/2658/
(closes issue ASTERISK-21565)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@394858 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When QUEUE_MEMBER is used and the member specified is not in the queue,
Asterisk provides an ERROR message that indicates that the option specified
is not valid. This patch now properly displays an ERROR message that the
member is not in the queue if an interface is specified.
(closes issue ASTERISK-21980)
Reported by: Avraam David
........
Merged revisions 394345 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@394346 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This change removes AST_CEL_BRIDGE_UPDATE since it should no longer be
used because masquerade situations are now accounted for in other ways.
This also refactors usage of AST_CEL_FORWARD to be produced by a Dial
message which has been extended with a "forward" field.
(closes issue ASTERISK-21566)
Review: https://reviewboard.asterisk.org/r/2635/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@392829 65c4cc65-6c06-0410-ace0-fbb531ad65f3