The rtpengine configuration parameter was documented in the XML documentation,
but it was not actually registered with the sorcery object. This adds the
parameter with a default of "asterisk", such that res_rtp_asterisk is chosen as
the default RTP implementation.
(closes issue ASTERISK-22380)
Reported by: Rusty Newton
Tested by: Rusty Newton
........
Merged revisions 397621 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@397622 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When originating channels, ast_pbx_outgoing_* caused the dialed channel
reference to be bumped twice. Ostensibly, this routine is bumping the channel
lifetime such that the channel doesn't get nuked in between locks/unlocks;
however, since the routine should return the dialed channel with its
reference bumped, it only needs to do this one time.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@397606 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Starting Asterisk would kick back an ERROR message stating that the Stasis
message type ast_channel_snapshot_type was used prior to initialization.
This occurred due to the caching topic being created prior to the message
type that it depended on.
This patch re-orders the start up such that the message type is initialized
prior to the caching topic. It also checks the return value of the
initialization of the agent login/logoff types.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@397585 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Issuing hold/unhold would lead to odd behavior. Between two chan_sip devices,
a hold could cause an endless chain of updates while with pjsip a similar chain
would begin but then end somewhat randomly. This patch fixes that by no longer
tweaking the RTP glue on both sides of the call for every
HOLD/UNHOLD/UPDATE_RTP_PEER frame.
(issue ASTERISK-22217)
Reported by: Matt Jordan
Review: https://reviewboard.asterisk.org/r/2794/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@397578 65c4cc65-6c06-0410-ace0-fbb531ad65f3
DTMF start/end and hold/unhold events have state because a DTMF begin
event and hold event must be ended by something.
The following cases need to be handled when a channel is moved around in
the system.
* When a channel leaves a bridge it may owe a DTMF end event to the
bridge.
* When a channel leaves a bridge it may owe an UNHOLD event to the bridge.
(This case is explicitly ignored because things like transfers need
explicit control over this.)
* When a channel leaves the bridging system it may need to simulate a DTMF
end event to the channel.
* When a channel leaves the bridging system it may need to simulate an
UNHOLD event to the channel.
The patch also fixes the following:
* Fixes playing a file and restarting MOH using the latest MOH class used.
(closes issue ASTERISK-22043)
Reported by: Matt Jordan
Review: https://reviewboard.asterisk.org/r/2791/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@397577 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When strict XML documentation checking was re-enabled, the test objects used in
sorcery would fail to register as the types were not marked internal and the
nodoc option wasn't used for the options. This fixes that problem, such that,
as one would hope, they once again pass.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@397571 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Review https://reviewboard.asterisk.org/r/2580/ tried to fix the mismatch
in memory pools but had a math error determining the buffer size and
didn't address other similar memory pool mismatches.
* Effectively reverted the previous patch to go in the same direction as
trunk for the returned memory pool of ast_bt_get_symbols().
* Fixed memory leak in ast_bt_get_symbols() when BETTER_BACKTRACES is
defined.
* Fixed some formatting in ast_bt_get_symbols().
* Fixed sig_pri.c freeing memory allocated by libpri when MALLOC_DEBUG is
enabled.
* Fixed __dump_backtrace() freeing memory from ast_bt_get_symbols() when
MALLOC_DEBUG is enabled.
* Moved __dump_backtrace() because of compile issues with the utils
directory.
(closes issue ASTERISK-22221)
Reported by: Matt Jordan
Review: https://reviewboard.asterisk.org/r/2778/
........
Merged revisions 397525 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 397528 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@397570 65c4cc65-6c06-0410-ace0-fbb531ad65f3
If an option is registered to a type and it is the last known type in the list
of registered types, and the option fails to register, an overrun of the types
array can occur due to the index variable having been already incremented.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@397568 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Most, if not all, of the backing features of a conf file should now be
implemented (e.g. multi-line comments, includes, templates, etc...). A
few of the options still need to be mapped. Those are currently listed
in the 'sip_to_res_sip.py' file.
Things to do:
(1) There is more work to do here, at least for the sip.conf items that
aren't currently parsed. An issue will be created for that.
(2) All of the scripts should probably be passed through pylint and have
as many PEP8 issues fixed as possible.
(3) A public review is probably warranted at that point of the entire script.
Reported by: Matt Jordan
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@397567 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch adds error checking to ARI bridge operations, when
adding/removing channels to/from bridges.
In general, the error codes fall out as follows:
* Bridge not found - 404 Not Found
* Bridge not in Stasis - 409 Conflict
* Channel not found - 400 Bad Request
* Channel not in Stasis - 422 Unprocessable Entity
* Channel not in this bridge (on remove) - 422 Unprocessable Entity
(closes issue ASTERISK-22036)
Review: https://reviewboard.asterisk.org/r/2769/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@397565 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch adds pass through support for Opus and VP8. That includes:
* Format attribute negotiation for Opus. Note that unlike some other codecs,
the draft RFC specifies having spaces delimiting the attributes in addition
to ';', so you have "attra=X; attrb=Y". This broke the attribute parsing in
chan_sip, so a small tweak was also included in this patch for that.
* A format attribute negotiation module for Opus, res_format_attr_opus
* Fast picture update for VP8. Since VP8 uses a different RTCP packet number
than FIR, this really is specific to VP8 at this time.
Note that the format attribute negotiation in res_pjsip_sdp_rtp was written
by mjordan. The rest of this patch was written completely by Lorenzo Miniero.
Review: https://reviewboard.asterisk.org/r/2723/
(closes issue ASTERISK-21981)
Reported by: Tzafrir Cohen
patches:
asterisk_opus+vp8_passthrough_20130718.patch uploaded by lminiero (License 6518)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@397526 65c4cc65-6c06-0410-ace0-fbb531ad65f3
There are times when a configuration option should not have documentation.
1. Some options are registered with a particular object merely as a warning to
users. These options aren't even really 'deprecated' - which has its own
separate API call - they are actually provided by a different configuration
file. The options are merely registered so that the user gets a warning that
a different configuration file provides the item.
2. Some object types - most notably some used by modules that use sorcery - are
completely internal and should never be shown to the user.
3. Sorcery itself has several 'hidden' fields that should never be shown to a
user.
This patch updates the configuration framework and sorcery with additional API
calls that allow a module to register types as internal and options as not
requiring documentation. This bypasses the XML documentation checking.
This patch also re-enables the strict XML documentation checking in trunk, as
well as updates some documentation that was missing.
Review: https://reviewboard.asterisk.org/r/2785/
(closes issue ASTERISK-22359)
Reported by: Matt Jordan
(closes issue ASTERISK-22112)
Reported by: Rusty Newton
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@397524 65c4cc65-6c06-0410-ace0-fbb531ad65f3
If a response to an initial incoming INVITE results in a transport error
the INVITE transaction is removed from the INVITE session. Any attempts
to answer the INVITE session after this results in a crash as it requires
the INVITE transaction to exist. This change explicitly locks the dialog
and checks to ensure that the INVITE transaction exists before answering.
(closes issue AST-1203)
Reported by: John Bigelow
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@397515 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Adds ARI functions to be able to turn on/off music on hold in a
bridge. It actually functions more as a background music without
further actions on the bridge since if the rest of the channels
in the bridge aren't explicitly muted, they will still be able
to communicate.
(closes issue ASTERISK-21974)
Reported by: Matt Jordan
Review: https://reviewboard.asterisk.org/r/2688/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@397505 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This adds a new dialplan application, SayAlphaCase, that performs much
the same function as SayAlpha except that it takes additional options
which allow the user to specify whether the case of each letter should
be announced for uppercase, lowercase, or all letters. Similar
functionality has been added to the SAY ALPHA AGI command via an
optional parameter.
Original Patch by: Kevin Scott Adams
Reported by: Kevin Scott Adams
Review: https://reviewboard.asterisk.org/r/2725/
(closes issue ASTERISK-20782)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@397493 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The cause code needs to be passed from the disconnecting channel to the
bridge peers if the disconnecting channel dissolves the bridge.
* Made the call to an app_agent_pool agent disconnect with the busy cause
code if the agent does not ack the call in time or hangs up before acking
the call.
(closes issue ASTERISK-22042)
Reported by: Matt Jordan
Review: https://reviewboard.asterisk.org/r/2772/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@397472 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This essentially makes app_queue usable again. From reviewboard:
* Reporting of transfers and call completion is done by creating stasis
subscriptions and listening for specific events in order to determine
when the call is finished (either via a transfer or hangup).
* Dial end messages have been added where they were previously missing.
* Queue stats are properly being updated again once calls have finished.
* AgentComplete stasis messages and AMI events are now occurring again.
* Mixmonitor starting has been factored into its own function and uses the
Mixmonitor API now instead of using ast_pbx_run()
In addition to the changes in app_queue, there are several supplementary changes as well:
* Queue logging now differentiates between attended and blind transfers. A
note about this is in the CHANGES file.
* Local channel optimization events now report more information. This
includes which of the two local channels involved is the destination of
the optimization, the channel that is replacing the destination local channel,
and an identifier so that begin and end events can be matched to each other.
The end events are now sent whether the optimization was successful or not and
includes an indicator of whether the optimization was successful.
* Changes were made to features and bridging_basic so that additional flags may
be set on a bridge. This is necessary because the queue requires that its
bridge only allows move-swap local channel optimizations into the bridge.
(closes issue ASTERISK-21517)
Reported by Matt Jordan
(closes issue ASTERISK-21943)
Reported by Matt Jordan
Review: https://reviewboard.asterisk.org/r/2694
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@397451 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Prior to this change, we would reject SUBSCRIBE requests that had no Accept
headers. Now event package handlers that handle the default type for the
event package indicate that they do so. Therefore, if we have a handler that
can handle the default type, we can allow SUBSCRIBEs for the handler's event
package that have no Accept headers.
(closes issue ASTERISK-22067)
reported by Mark Michelson
Review: https://reviewboard.asterisk.org/r/2774
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@397441 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Resync the abstract jitter buffer on the following additional control
frames:
AST_CONTROL_HOLD
AST_CONTROL_UNHOLD
AST_CONTROL_T38_PARAMETERS
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@397440 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This modifies the behavior of the CEL engine to conform to documented
behavior for Asterisk 12 as defined on the wiki
https://wiki.asterisk.org/wiki/display/AST/Asterisk+12+CEL+Specification
The primary changes deal with removal of the peer field from function
calls since it is no longer directly relevant to the bridging system
and removal of the layer of CDR-like business logic that was providing
a partial emulation of Asterisk 11 CEL functionality. With this change,
there is no longer a distinction between "bridges" and "conferences"
and all participation changes are denoted with bridge enter and bridge
exit messages.
This updates the CEL unit tests to handle these changes and simplifies
some of the macros used in the process.
This also fixes a segfault when attempting to ref a configuration that
failed to load.
Review: https://reviewboard.asterisk.org/r/2788/
(issue ASTERISK-21567)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@397431 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The --version-script,asterisk.exports linker flag (and the module
exports) didn't provide _IO_stdin_used in the list of exported symbols.
That causes some kind of libc compatibility mode to kick in, where
stdio file structures (stdout/stderr) land somewhere else. In the
case of the Sparc, they landed on misaligned memory.
This became apparent first after r376428 (Reorder startup sequence)
when a lot of ast_log's were replaced with fprintf's. Writing to
stderr triggered a SIGBUS. (Compared to x86 and amd64 architectures,
the Sparc is very picky about memory alignment.)
(issue ASTERISK-21763)
(issue ASTERISK-21665)
Reported by: Jeremy Kister
Review: https://reviewboard.asterisk.org/r/2760/
........
Merged revisions 397377 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 397378 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@397379 65c4cc65-6c06-0410-ace0-fbb531ad65f3
If the file udptl.conf is unavailable at startup, UDPTL will fail to
initialize and while it makes some noise, it isn't immediately
obvious why consumers start to fail when using it. This patch makes
UDPTL load as though an empty config was provided when udptl is
unavailable at startup.
(closes issue ASTERISK-22349)
Reported by: Jonathan Rose
Review: https://reviewboard.asterisk.org/r/2773/
........
Merged revisions 397365 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@397366 65c4cc65-6c06-0410-ace0-fbb531ad65f3
If an endpoint fails to include the T38MaxBitRate attribute during negotiation,
Asterisk will negotiate a bit rate of 2400 instead of the ITU recommended
bit rate of 14400. This patch fixes this by making AST_T38_RATE_14400 the
'default' value of the enum by assigning it a value of 0, such that if an
endpoint fails to include the attribute, the default will be 14400.
Note that Walter Doekes included the nice comment in frame.h about why we are
purposefully assigning AST_T38_RATE_14400 a value of 0.
(closes issue ASTERISK-22275)
Reported by: Andreas Steinmetz
patches:
fax-fix.patch uploaded by anstein (License 6523)
........
Merged revisions 397256 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 397257 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@397307 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Both /asterisk/variable and /channel/{channelId}/variable requires a
?variable parameter to be passed into the query. But we weren't checking
for the parameter being missing, which caused a segfault.
All calls now properly return 400 Bad Request errors when the parameter
is missing. The Swagger api-docs were updated accordingly.
(closes issue ASTERISK-22273)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@397306 65c4cc65-6c06-0410-ace0-fbb531ad65f3
For times when a reference in ARI might be ambiguous, the reference is
built as an URI (such as channel:1376341790.3).
An endpoint's channel list is not ambiguous, and in fact the field is
named 'channel_ids', but it had channel URI's instead of channel id's.
This patch changes the list to be the raw id instead of the URI.
(closes issue ASTERISK-22291)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@397297 65c4cc65-6c06-0410-ace0-fbb531ad65f3
In the shuffling around of res_stasis, control_continue was renamed to
stasis_app_control_continue, but the call in res_stasis wasn't updated.
In looking into it, it turns out it wasn't really the right thing to do
in res_stasis anyways.
This patch changes the handling of received a AST_CONTROL_HANGUP frame
to be the same as receiving a NULL frame, and removed the declaration of
control_continue(), since it doesn't exist any more.
(closes issue ASTERISK-22292)
Reported by: Denis Smirnov
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@397295 65c4cc65-6c06-0410-ace0-fbb531ad65f3
* Added an option flags parameter to interval hooks. Interval hooks now
can specify if the callback will affect the media path or not.
* Added an option flags parameter to the bridge action custom callback.
The action callback now can specify if the callback will affect the media
path or not.
* Made the holding bridge technology reexamine the participant idle mode
option whenever the entertainment is restarted.
* Fixed app_agent_pool waiting agents needlessly starting and stopping MOH
every second by specifying the heartbeat interval hook as not affecting
the media path.
* Fixed app_agent_pool agent alert from restarting the MOH after the alert
beep. The agent entertainment is now changed from MOH to silence after
the alert beep.
* Fixed holding bridge technology to defer starting the entertainment. It
was previously a mixture of immediate and deferred.
* Fixed holding bridge technology to immediately stop the entertainment.
It was previously a mixture of immediate and deferred. If the channel
left the bridging system, any deferred stopping was discarded before
taking effect.
* Miscellaneous holding bridge technology rework coding improvements.
Review: https://reviewboard.asterisk.org/r/2761/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@397294 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Matthew Jordan
Joshua Colp
Mark Michelson
Richard Mudgett
Jonathan Rose
Kevin Harwell
David M. Lee
Kinsey Moore
Rusty Newton
Walter Doekes