During testing, it was discovered that there were a number of side effects
introduced by r346391 and subsequent check-ins related to it (r346429,
r346617, and r346655). This included the /main/stdtime/ test 'hanging',
as well as the remote console option failing to receive the appropriate output
after a period of time.
I only backed out the changes to main/ and utils/, as this was adequate
to reverse the behavior experienced.
(issue ASTERISK-18974)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@347997 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The STUN socket must remain open between polls or the external address
seen by the STUN server is likely to change. However, if the STUN request
poll fails then the STUN server address needs to be re-resolved and the
STUN socket needs to be closed and reopened.
* Re-resolve the STUN server address and create a new socket if the STUN
request poll fails.
* Fix ast_stun_request() return value consistency.
* Fix ast_stun_request() to check the received packet for expected message
type and transaction ID.
* Fix ast_stun_request() to read packets until timeout or an associated
response packet is found. The stun_purge_socket() hack is no longer
required.
* Reduce ast_stun_request() error messages to debug output.
* No longer pass in the destination address to ast_stun_request() if the
socket is already bound or connected to the destination.
(closes issue ASTERISK-18327)
Reported by: Wolfram Joost
Tested by: rmudgett
Review: https://reviewboard.asterisk.org/r/1595/
........
Merged revisions 346700 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 346701 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@346709 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch adds two new menu features to app_confbridge, admin_toggle_menu_
participants and participant_count. The admin action will globally mute /
unmute all non-admin participants on a converence, while the participant
count simply exposes the existing participant count function to the
conference bridge menu.
This also adds configuration options to change the sound played when the
conference is globally muted / unmuted, as well as the necessary config
hooks to place these functions in the DTMF menus.
(closes issue ASTERISK-18204)
Reported by: Kevin Reeves
Tested by: Matt Jordan
Patches:
app_confbridge.c.patch.txt, conf_config_parser.c.patch.txt,
confbridge.h.patch.txt uploaded by Kevin Reeves (license 6281)
Review: https://reviewboard.asterisk.org/r/1518/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@345560 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The recent fix for ASTERISK-17288 to get RFC3578 SIP overlap support
working correctly removed a long standing ability to do overlap dialing
using DTMF in the early media phase of a call.
See ASTERISK-18702 it has a very good description of the issue.
I started with Pavel Troller's chan_sip.diff patch on issue
ASTERISK-18702.
* Added 'dtmf' enum value to sip.conf allowoverlap config option. The new
option value causes the Incomplte application to not send anything with
chan_sip so the caller can supply more digits via DTMF.
* Renames SIP_GET_DEST_PICKUP_EXTEN_FOUND to SIP_GET_DEST_EXTEN_MATCHMORE
since that is what it really means.
* Fixed get_destination() inconsistency with the pickup extension
matching.
* Fixed initialization of PAGE3 of global_flags in reload_config().
(closes issue ASTERISK-18702)
Reported by: Pavel Troller
Review: https://reviewboard.asterisk.org/r/1517/
Review: https://reviewboard.asterisk.org/r/1582/
........
Merged revisions 345273 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 345275 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@345276 65c4cc65-6c06-0410-ace0-fbb531ad65f3
You can now use the built in variables , , and
within a dynamic weight. For example, this could be useful when you want
to pass requested lookup number to the SHELL() function which could be
used to execute a script to dynamically set the weight of the result.
(Closes issue ASTERISK-13657)
Reported by: Joel Vandal
Tested by: Leif Madsen, Russell Bryant
Patches:
asterisk-1.6-dundi-varhead.patch uploaded by Joel Vandal (License #5374)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@343693 65c4cc65-6c06-0410-ace0-fbb531ad65f3
There were several problems with the dynamic realtime peer/user lookup
code. The lookup logic had become rather hard to read due to lots of
incremental changes to the realtime_peer function. And, during the
addition of the sipregs functionality, several possibilities for memory
leaks had been introduced. The insecure=port matching has always been
broken for anyone using the sipregs family. And, related, the broken
implementation forced those using sipregs to *still* have an ipaddr
column on their sippeers table.
Thanks Terry Wilson for comprehensive testing and finding and fixing
unexpected behaviour from the multientry realtime call which caused
the realtime_peer to have a completely unused code path.
This changeset fixes the leaks, the lookup inconsistenties and that
you won't need an ipaddr column on your sippeers table anymore (when
you're using sipregs). Beware that when you're using sipregs, peers
with insecure=port will now start matching!
(closes issue ASTERISK-17792)
(closes issue ASTERISK-18356)
Reported by: marcelloceschia, Walter Doekes
Reviewed by: Terry Wilson
Review: https://reviewboard.asterisk.org/r/1395
........
Merged revisions 342927 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 342929 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@342930 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/10
........
r341599 | irroot | 2011-10-20 20:20:08 +0200 (Thu, 20 Oct 2011) | 8 lines
add documentation for check_state_unknown in configs/queues.conf.sample
app_queue allows calls to members in a "Unknown" state to be treated as available
setting check_state_unknown = yes will cause app_queue to query the channel driver
to better determine the state this only applies to queues with ringinuse or ignorebusy
set appropriately.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@341624 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/10
................
r337775 | russell | 2011-09-22 19:45:35 -0500 (Thu, 22 Sep 2011) | 18 lines
Merged revisions 337774 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r337774 | russell | 2011-09-22 19:44:19 -0500 (Thu, 22 Sep 2011) | 11 lines
Comment out entries in sample res_pktccops.conf.
With these options enabled, they can cause Asterisk to freak out by
SYN flooding a network and eating the CPU. Obviously it would be good to
fix the code so that this can't happen, but we can at least change the default
configuration so it doesn't happen.
This was reported downstream to the Fedora issue tracker:
https://bugzilla.redhat.com/show_bug.cgi?id=658431
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@337776 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/10
........
r337595 | jrose | 2011-09-22 10:35:50 -0500 (Thu, 22 Sep 2011) | 12 lines
Generate Security events in chan_sip using new Security Events Framework
Security Events Framework was added in 1.8 and support was added for AMI to generate
events at that time. This patch adds support for chan_sip to generate security events.
(closes issue ASTERISK-18264)
Reported by: Michael L. Young
Patches:
security_events_chan_sip_v4.patch (license #5026) by Michael L. Young
Review: https://reviewboard.asterisk.org/r/1362/
........
r337597 | jrose | 2011-09-22 10:47:05 -0500 (Thu, 22 Sep 2011) | 10 lines
Forgot to svn add new files to r337595
Part of Generating security events for chan_sip
(issue ASTERISK-18264)
Reported by: Michael L. Young
Patches:
security_events_chan_sip_v4.patch (License #5026) by Michael L. Young
Reviewboard: https://reviewboard.asterisk.org/r/1362/
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@337600 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/10
........
r337219 | oej | 2011-09-21 11:32:50 +0200 (Ons, 21 Sep 2011) | 13 lines
Make ast_pbx_run() not default to s@default if extension is not found
Review: https://reviewboard.asterisk.org/r/1446/
This is a bug - or architecture mistake - that has been in Asterisk for a
very long time. It was exposed by the AMI originate action and possibly
some other applications. Most channel drivers checks if an extension
exists BEFORE starting a pbx on an inbound call, so most calls will
not depend on this issue.
Thanks everyone involved in the review and on IRC and the mailing list
for a quick review and all the feedback.
(closes issue ASTERISK-18578)
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@337220 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/10
........
r337178 | oej | 2011-09-21 10:51:41 +0200 (Ons, 21 Sep 2011) | 14 lines
Change strictrtp option to default to yes in the RTP module
Suggested by Kapejod on Facebook
Review: https://reviewboard.asterisk.org/r/1448/
(closes issue ASTERISK-18587)
Thanks for quick feedback to kpfleming and Tilghman
--Denna och nedanstående rader kommer inte med i loggmeddelandet--
M CHANGES
M configs/rtp.conf.sample
M res/res_rtp_asterisk.c
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@337179 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/10
........
r336936 | irroot | 2011-09-20 18:51:59 +0200 (Tue, 20 Sep 2011) | 14 lines
Allow Setting Auth Tag Bit length Based on invite or config option
Update the SIP SRTP API to allow use of 32 or 80 bit taglen.
Curently only 80 bit is supported.
The outgoing invite will use the taglen of the incoming invite preventing
one-way audio.
(Closes issue ASTERISK-17895)
Review: https://reviewboard.asterisk.org/r/1173/
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@336937 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This permits the list of codecs to be specified in one configuration line,
instead of two or more, generally with the aim of either allowing all codecs
with the exception of a few or disallowing most but permitting a few.
Review: https://reviewboard.asterisk.org/r/1411/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@334574 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch adds a CDR option to cdr.conf that will allow CDR files to log calls ending
with congestion in a way that is unique from other unanswered calls.
(closes issue ASTERISK-14842)
Reported by: Alec Davis
Patches:
cdr_congestion.diff.txt (License #5546) patch uploaded by Alec Davis
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@332760 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/10
................
r332265 | rmudgett | 2011-08-17 11:01:29 -0500 (Wed, 17 Aug 2011) | 33 lines
Merged revisions 332264 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r332264 | rmudgett | 2011-08-17 10:51:08 -0500 (Wed, 17 Aug 2011) | 26 lines
Outgoing BRI calls fail when using Asterisk 1.8 with HA8, HB8, and B410P cards.
France Telecom brings layer 2 and layer 1 down on BRI lines when the line
is idle. When layer 1 goes down Asterisk cannot make outgoing calls and
the HA8 and HB8 cards also get IRQ misses.
The inability to make outgoing calls is because the line is in red alarm
and Asterisk will not make calls over a line it considers unavailable.
The IRQ misses for the HA8 and HB8 card are because the hardware is
switching clock sources from the line which just brought layer 1 down to
internal timing.
There is a DAHDI option for the B410P card to not tell Asterisk that layer
1 went down so Asterisk will allow outgoing calls: "modprobe wcb4xxp
teignored=1". There is a similar DAHDI option for the HA8 and HB8 cards:
"modprobe wctdm24xxp bri_teignored=1". Unfortunately that will not clear
up the IRQ misses when the telco brings layer 1 down.
* Add layer 2 persistence option to customize the layer 2 behavior on BRI
PTMP lines. The new option has three settings: 1) Use libpri default
layer 2 setting. 2) Keep layer 2 up. Bring layer 2 back up when the peer
brings it down. 3) Leave layer 2 down when the peer brings it down.
Layer 2 will be brought up as needed for outgoing calls.
JIRA AST-598
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@332270 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/10
................
r332101 | rmudgett | 2011-08-16 12:17:28 -0500 (Tue, 16 Aug 2011) | 140 lines
Merged revisions 332100 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r332100 | rmudgett | 2011-08-16 11:31:36 -0500 (Tue, 16 Aug 2011) | 133 lines
Fix multiple parking issues.
JIRA ASTERISK-17183
Multi-parkinglot directs calls to wrong parkinglot.
JIRA ASTERISK-17870
Cannot retrieve parked calls.
JIRA ASTERISK-17430
ParkedCall() with no extension should pickup first available call and does not.
JIRA AST-576
Issues with parking lots
* Removed searching for parking lots by extension. Parking lots can only
be found by the parking lot name since parking lot access extensions and
spaces are not guaranteed to be unique.
* Added parking_lot_name option to the Park and ParkedCall applications.
Updated documentation for Park and ParkedCall applications.
* Add parkext_exclusive configuration option to make parking entry
extensions specify which parking lot they access.
(closes issue ASTERISK-17183)
Reported by: David Cabrejos
Tested by: rmudgett, David Cabrejos
(closes issue ASTERISK-17870)
Reported by: Remi Quezada
(closes issue ASTERISK-17430)
Reported by: Philippe Lindheimer
JIRA ASTERISK-17452
Parking_offset not used
JIRA AST-624
'next' setting for findslot does nothing
* Reimplemented since findslot feature option broken by -r114655.
(closes issue ASTERISK-17452)
Reported by: David Woolley
Tested by: rmudgett
JIRA ASTERISK-15792
Dialplan continues execution after transfer to park.
This happens for DTMF attended transfer, DTMF blind transfer, and DTMF
one-touch-parking if the party initiating these features also initiated
the call.
* Fixed the return code from the affected builtin features when parking a
call.
(closes issue ASTERISK-15792)
Reported by: Mat Murdock
Tested by: rmudgett, twilson
JIRA AST-607
The courtesytone is not playing to the expected call when picking up a
parked call.
This is mostly a documentation problem. However, the option is not reset
to the default when features.conf is reloaded.
* Updated features.conf.sample documentation for courtesytone and
parkedplay options.
* Reset the parkedplay option to default when features.conf is reloaded.
JIRA AST-615
AMI Park action followed by features reload results in orphaned channels
in parking lot.
* Reloading features.conf will not touch parking lots that have calls
still parked in them. Reload again at a later time.
Misc additional fixes:
* Added unit test for parking lot dialplan usage checking.
* Made update connected line when a parked call is retrieved from a
parking lot.
* Made retrieved parked call stop ringing or MOH depending upon how the
call was waiting in the parking lot.
* Made CLI "features show" indicate if the parking lot is enabled for use.
* Added PARKINGDYNEXTEN channel variable to allow dynamic parking lots to
specify the parking lot access extension.
* Made AMI ParkedCalls action ParkedCall events have a Parkinglot header.
* Made AMI ParkedCalls action ParkedCallsComplete event have a Total
header.
* Fixed potential deadlock from AMI Park action holding channel locks
while calling masq_park_call().
* Fixed several places where ast_strdupa() were used inside of loops.
(Mostly fixed by refactoring the loop body into its own function.)
* Fixed copy_parkinglot() copying too much from the source parking lot.
Extracted the parking lot configuration settings into struct
parkinglot_cfg.
* Refactored courtesytone playing code to put the channel not playing the
tone in autoservice.
* Fix when pbx-parkingfailed is played that the other channel is put in
autoservice if it exists.
* Fixed parkinglot reference leak in parked_call_exec() error paths.
* Fixed parkinglot_unref() use of parkinglot after it was unreffed.
* Made destroy the struct ast_parkinglot parkings lock when done.
* Refactored the features.conf parking lot configuration code to eliminate
redundancy.
* Fixed feature reload to better protect parking lots.
* Fixed parking lot container reference leak in handle_parkedcalls().
* Fixed the total count in handle_parkedcalls().
Review: https://reviewboard.asterisk.org/r/1358/
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@332117 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/10
................
r332022 | mnicholson | 2011-08-16 09:40:37 -0500 (Tue, 16 Aug 2011) | 16 lines
In 10 and trunk this option is disabled by default.
Merged revisions 332021 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r332021 | mnicholson | 2011-08-16 09:20:43 -0500 (Tue, 16 Aug 2011) | 7 lines
Added the 'storesipcause' option to sip.conf to allow the user to disable the
setting of HASH(SIP_CAUSE,<chan name>) on the channel.
Having chan_sip set HASH(SIP_CAUSE,<chan name>) on the channel carries a
significant performance penalty because of the usage of the MASTER_CHANNEL()
dialplan function.
AST-580
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@332023 65c4cc65-6c06-0410-ace0-fbb531ad65f3
app_queue logs the events ADDMEMBER and REMOVEMEMBER with the agent field set
to the interface value rather than the membername value when a member is added
with a state_interface value set. However all other member related queue
events are logged with the membername when a state_interface is set. This
patch makes these fields optionally more consistent and correct.
(closes issue ASTERISK-14769)
Review: https://reviewboard.asterisk.org/r/1286
Patch-by: Jamuel Starkey
Tested-by: Kinsey Moore <kmoore@digium.com>
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@331037 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/10
........
r329952 | seanbright | 2011-07-28 09:03:58 -0400 (Thu, 28 Jul 2011) | 4 lines
The default conf-usermenu says that '8' can be used to leave the conference, so
put that in the sample user menu. '5' is supposed to extend the conference, but
there doesn't appear to be a concept of that in the menu actions.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@329953 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/10
................
r329528 | jrose | 2011-07-26 08:52:34 -0500 (Tue, 26 Jul 2011) | 24 lines
Merged revisions 329527 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r329527 | jrose | 2011-07-26 08:25:35 -0500 (Tue, 26 Jul 2011) | 17 lines
Fixes some voicemail forwarding behavior based around prepend mode.
Formerly, prepend forwarding would have the user record a message with no useful prompt
and an expectation for the user to push a button on the phone when finished recording.
If a length of silence was detected instead, the recording would be canceled and the user
would re-enter the voicemail forwarding menu. Subsequent time-outs in prepend recording
would also bug out in the sense that they would write over the original message and get
sent to the recipient regardless of whether they timed out or were accepted. This patch
fixes this issue and adds a prompt which will be played after a timeout informing the
user that they needed to press a button. Currently, the sound files that we have are
somewhat inadquate for this, so after the call we simply have Allison say "Please try
again. Then press pound." which actually relies on two separate sound files. Just one
would be more appropriate.
reporter: Vlad Povorozniuc
Review: https://reviewboard.asterisk.org/r/1327/
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@329530 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch adds pass-through support for CELT. CELT
formats are defined in codecs.conf and can be configured
to any sample rate a CELT endpoint supports. This patch also
addresses a crash in channel.c resulting from a frame list being
freed incorrectly. This crash was discovered while testing a CELT
translator which had to split encoded audio into multiple frames.
The codec translator is not a part of this patch, but may be
contributed in the future.
Review: https://reviewboard.asterisk.org/r/1294/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@326855 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r325935 | rmudgett | 2011-06-30 15:39:45 -0500 (Thu, 30 Jun 2011) | 11 lines
Misc minor changes in chan_sip.
* Add load failure exit if primary SIP container(s) could not get created
in chan_sip.c:load_module().
* Removed a redundant static prototype.
* Some typos.
* Some whitespace.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@325936 65c4cc65-6c06-0410-ace0-fbb531ad65f3
* Added general option negative_penalty_invalid default off. when set
members are seen as invalid/logged out when there penalty is negative.
for realtime members when set remove from queue will set penalty to -1.
* Added queue option autopausedelay when autopause is enabled it will be
delayed for this number of seconds since last successful call if there
was no prior call the agent will be autopaused immediately.
* Added member option ignorebusy this when set and ringinuse is not
will allow per member control of multiple calls as ringinuse does for
the Queue.
- Mark QUEUE_MEMBER_PENALTY Deprecated it never worked for realtime members
- QUEUE_MEMBER is now R/W supporting setting paused, ignorebusy and penalty.
(closes issue ASTERISK-17421)
(closes issue ASTERISK-17391)
Reported by: irroot
Tested by: irroot, jrose
Review: https://reviewboard.asterisk.org/r/1119/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@325483 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Asterisk now has protocol independent support for processing text messages
outside of a call. Messages are routed through the Asterisk dialplan.
SIP MESSAGE and XMPP are currently supported. There are options in sip.conf
and jabber.conf that enable these features.
There is a new application, MessageSend(). There are two new functions,
MESSAGE() and MESSAGE_DATA(). Documentation will be available on
the project wiki, wiki.asterisk.org.
Thanks to Terry Wilson for the assistance with development and to David Vossel
for helping with some additional testing.
Review: https://reviewboard.asterisk.org/r/1042/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@321546 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Matthew Jordan
Richard Mudgett
Terry Wilson
Leif Madsen
Tilghman Lesher
Walter Doekes
Gregory Nietsky
Jonathan Rose
Russell Bryant
Olle Johansson
Paul Belanger
Matthew Nicholson
Jason Parker
Kinsey Moore
Sean Bright
Alexandr Anikin
David Vossel