Asterisk does not support any of the transfer encodings specified in
HTTP/1.1, other than the default "identity" encoding.
According to RFC 2616:
A server which receives an entity-body with a transfer-coding it does
not understand SHOULD return 501 (Unimplemented), and close the
connection. A server MUST NOT send transfer-codings to an HTTP/1.0
client.
This patch adds the 501 Unimplemented response, instead of the hard work
of actually implementing other recordings.
This behavior is especially problematic for Node.js clients, which use
chunked encoding by default.
(closes issue ASTERISK-22486)
Review: https://reviewboard.asterisk.org/r/3092/
........
Merged revisions 404565 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@404567 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Implements the following cli commands:
pjsip list aors
pjsip list auths
pjsip list channels
pjsip list contacts
pjsip list endpoints
pjsip show aor(s)
pjsip show auth(s)
pjsip show channels
pjsip show endpoint(s)
Also...
Minor modifications made to the AMI command implementations to facilitate
reuse.
New function ast_variable_list_sort added to config.c and config.h to implement
variable list sorting.
(issue ASTERISK-22610)
patches:
pjsip_cli_v2.patch uploaded by george.joseph (License 6322)
........
Merged revisions 404480 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@404507 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch updates the log messages to include descriptive
names for event types. This is an improvement over having
only cryptic type numbers.
(closes issue ASTERISK-22909)
Reported by: outtolunc
Review: https://reviewboard.asterisk.org/r/3081/
Patches:
svn_security_events.c.names.diff.txt uploaded by outtolunc (license 5198)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@404387 65c4cc65-6c06-0410-ace0-fbb531ad65f3
For the explanation, here is a copy-paste of the review board explanation:
Initially, it was discovered that performing an attended transfer of a
multiparty bridge with a PJSIP channel would cause a deadlock. A PBX thread
started a masquerade and reached the point where it was calling the fixup()
callback on the "original" channel. For chan_pjsip, this involves pushing a
synchronous task to the session's serializer. The problem was that a task ahead
of the fixup task was also attempting to perform a channel masquerade. However,
since masquerades are designed in a way to only allow for one to occur at a
time, the task ahead of the fixup could not continue until the masquerade
already in progress had completed. And of course, the masquerade in progress
could not complete until the task ahead of the fixup task had completed.
Deadlock.
The initial fix was to change the fixup task to be asynchronous. While this
prevented the deadlock from occurring, it had the frightful side effect of
potentially allowing for tasks in the session's serializer to operate on a
zombie channel.
Taking a step back from this particular deadlock, it became clear that the
problem was not really this one particular issue but that masquerades
themselves needed to be addressed. A PJSIP attended transfer operation calls
ast_channel_move(), which attempts to both set up and execute a masquerade. The
problem was that after it had set up the masquerade, the PBX thread had swooped
in and tried to actually perform the masquerade. Looking at changes that had
been made to Asterisk 12, it became clear that there never is any time now that
anyone ever wants to set up a masquerade and allow for the channel thread to
actually perform the masquerade. Everyone always is calling ast_channel_move(),
performs the masquerade itself before returning.
In this patch, I have removed all blocks of code from channel.c that will
attempt to perform a masquerade if ast_channel_masq() returns true. Now, there
is no distinction between setting up a masquerade and performing the
masquerade. It is one operation. The only remaining checks for
ast_channel_masq() and ast_channel_masqr() are in ast_hangup() since we do not
want to interrupt a masquerade by hanging up the channel. Instead, now
ast_hangup() will wait for a masquerade to complete before moving forward with
its operation.
The ast_channel_move() function has been modified to basically in-line the
logic that used to be in ast_channel_masquerade(). ast_channel_masquerade() has
been killed off for real. ast_channel_move() now has a lock associated with it
that is used to prevent any simultaneous moves from occurring at once. This
means there is no need to make sure that ast_channel_masq() or
ast_channel_masqr() are already set on a channel when ast_channel_move() is
called. It also means the channel container lock is not pulling double duty by
both keeping the container locked and preventing multiple masquerades from
occurring simultaneously.
The ast_do_masquerade() function has been renamed to do_channel_masquerade()
and is now internal to channel.c. The function now takes explicit arguments of
which channels are involved in the masquerade instead of a single channel.
While it probably is possible to do some further refactoring of this method, I
feel that I would be treading dangerously. Instead, all I did was change some
comments that no longer are true after this changeset.
The other more minor change introduced in this patch is to res_pjsip.c to make
ast_sip_push_task_synchronous() run the task in-place if we are already a SIP
servant thread. This is related to this patch because even when we isolate the
channel masquerade to only running in the SIP servant thread, we would still
deadlock when the fixup() callback is reached since we would essentially be
waiting forever for ourselves to finish before actually running the fixup. This
makes it so the fixup is run without having to push a task into a serializer at
all.
(closes issue ASTERISK-22936)
Reported by Jonathan Rose
Review: https://reviewboard.asterisk.org/r/3069
........
Merged revisions 404356 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@404368 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This change is in preparation for external MWI support.
Removed code from the system for normal mailbox handling that appends
@default to the mailbox identifier if it does not have a context. The
only exception is the legacy hasvoicemail users.conf option. The legacy
option will only work for app_voicemail mailboxes. The system cannot make
any assumptions about the format of the mailbox identifer used by
app_voicemail.
chan_sip and chan_dahdi/sig_pri had the most changes because they both
tried to interpret the mailbox identifier. chan_sip just stored and
compared the two components. chan_dahdi actually used the box
information.
The ISDN MWI support configuration options had to be reworked because
chan_dahdi was parsing the box@context format to get the box number. As a
result the mwi_vm_boxes chan_dahdi.conf option was added and is documented
in the chan_dahdi.conf.sample file.
Review: https://reviewboard.asterisk.org/r/3072/
........
Merged revisions 404348 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@404350 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When Asterisk is shut down, the astdb_atexit() function releases
(finalize) the previously initiated (prepared) SQL statements in
sqlite3. Another thread making a subsequent request can cause a
crash in sqlite3. This patch eliminates that issue by resetting
the statement pointer after it is released/cleared. The sqlite3
code detects the null pointer, and aborts the operation cleanly.
(closes issue AST-1265)
Reported by: Alexander Hömig
(closes issue ASTERISK-22350)
Reported by: Birger "WIMPy" Harzenetter
Review: https://reviewboard.asterisk.org/r/3078/
........
Merged revisions 404344 from http://svn.asterisk.org/svn/asterisk/branches/11
........
Merged revisions 404345 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@404346 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When doing the rework of the CDR engine that pushed all of the logic into cdr.c
and made it respond to changes in channel state over Stasis, we knew that
accessing the CDR engine from the dialplan would be "slightly"
non-deterministic. Dialplan threads would be accessing CDRs while Stasis
threads would be updating the state of said CDRs - whereas in the past,
everything happened on the dialplan threads. Tests have shown that "slightly"
is in reality "very".
This patch synchronizes things by making the dialplan applications/functions
that manipulate CDRs do so over Stasis. ForkCDR, NoCDR, ResetCDR, CDR, and
CDR_PROP now all use Stasis to send their requests over to the CDR engine,
and synchronize on the channel Stasis topic via a subscription so that they
return their values/control to the dialplan at the appropriate time.
While going through this, the following changes were also made:
* DISA, which can reset the CDR when a user successfully authenticates, now
just uses the ResetCDR app to do this. This prevents having to duplicate
the same Stasis synchronization logic in that application.
* Answer no longer disables CDRs. It actually didn't work anyway - calling
DISABLE on the channel's CDR doesn't stop the CDR from getting the Answer
time - it just kills all CDRs on that channel, which isn't what the caller
would intend.
(closes issue ASTERISK-22884)
(closes issue ASTERISK-22886)
Review: https://reviewboard.asterisk.org/r/3057/
........
Merged revisions 404294 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@404295 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Original commit message by mmichelson (asterisk 12 r403311):
"This adds channel locks around calls to create channel snapshots as well
as other functions which operate on a channel and then end up
creating a channel snapshot. Functions that expect the channel to be
locked prior to being called have had their documentation updated to
indicate such."
The above was initially committed and then reverted at r403398. The problem
was found to be in core_local.c in the publish_local_bridge_message function.
The ast_unreal_lock_all function locks and adds a reference to the returned
channels and while they were being unlocked they were not being unreffed when
no longer needed. Fixed by unreffing the channels.
Also in bridge.c a lock was obtained on "other->chan", but then an attempt was
made to unlock "other" and not the previously locked channel. Fixed by
unlocking "other->chan"
(closes issue ASTERISK-22709)
Reported by: John Bigelow
........
Merged revisions 404237 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@404260 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Bridges have two new optional properties, a creator and a name.
Certain consumers of bridges will automatically provide bridges that
they create with these properties. Examples include app_bridgewait,
res_parking, app_confbridge, and app_agent_pool. In addition, a name
may now be provided as an argument to the POST function for creating
new bridges via ARI.
(closes issue AFS-47)
Review: https://reviewboard.asterisk.org/r/3070/
........
Merged revisions 404042 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@404043 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Framehooks can be used in a reactive manner to execute specific logic
when a frame is received with a certain type and payload. Since it is
possible for framehooks to provide frames it was possible for this
reactive framehook to be unaware of frames it is looking for.
This change makes it so that when framehooks return a modified frame
the code will now re-iterate (from the beginning) and call any
previous framehooks that have not provided a modified frame themselves.
Review: https://reviewboard.asterisk.org/r/3046/
........
Merged revisions 404027 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@404028 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch allows individual dialplan functions to be marked as
'dangerous', to inhibit their execution from external sources.
A 'dangerous' function is one which results in a privilege escalation.
For example, if one were to read the channel variable SHELL(rm -rf /)
Bad Things(TM) could happen; even if the external source has only read
permissions.
Execution from external sources may be enabled by setting
'live_dangerously' to 'yes' in the [options] section of asterisk.conf.
Although doing so is not recommended.
Also, the ABI was changed to something more reasonable, since Asterisk
12 does not yet have a public release.
(closes issue ASTERISK-22905)
Review: http://reviewboard.digium.internal/r/432/
........
Merged revisions 403913 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 403917 from http://svn.asterisk.org/svn/asterisk/branches/11
........
Merged revisions 403959 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@403960 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This change adds an event for when an originated call is redirected to
another target. This event contains the original channel and the newly
created channel. If a stasis subscription exists on the original originated
channel for a stasis application then a new subscription will also be
created on the stasis application to the redirected channel. This allows
the application to follow the call path completely.
(closes issue ASTERISK-22719)
Reported by: Joshua Colp
Review: https://reviewboard.asterisk.org/r/3054/
........
Merged revisions 403808 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@403810 65c4cc65-6c06-0410-ace0-fbb531ad65f3
There were still a few cases in which ATTENDEDTRANSFER and BLINDTRANSFER
wouldn't be set on channels involved with blind and attended transfers.
This would happen with features that were initialized by channel driver
specific mechanisms in multiparty calls. This patch resolves those cases
while attempted to keep the behavior for setting those variables as
consistent as possible.
(closes issue AFS-24)
Review: https://reviewboard.asterisk.org/r/3040/
........
Merged revisions 403781 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@403783 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The change contains a slightly adjusted patch that was on the issue
(submitted by kmoore). A fix was made by adding in a bridge lock
while calling bridge_start/stop from the framehook callback. Since
the framehook callback is not called from the bridging core the bridge
is not locked, but needs to be before calling bridge_start.
(closes issue ASTERISK-22749)
Reported by: Kinsey Moore
Review: https://reviewboard.asterisk.org/r/3066/
Patches:
lock_inversion.diff uploaded by kmoore (license 6273)
........
Merged revisions 403767 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@403768 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Added the ability to specify channel variables when creating/originating a
channel in ARI. The variables are sent in the body of the request and should
be formatted as a single level JSON object. No nested objects allowed.
For example: {"variable1": "foo", "variable2": "bar"}.
(closes issue ASTERISK-22872)
Reported by: Matt Jordan
Review: https://reviewboard.asterisk.org/r/3052/
........
Merged revisions 403752 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@403757 65c4cc65-6c06-0410-ace0-fbb531ad65f3
* The voicemail registration/unregistration functions now take a struct of
callbacks instead of a lengthy parameter list of callbacks.
* The voicemail registration/unregistration functions now prevent a
competing module from interfering with an already registered callback
supplying module.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@403643 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch adds CHANNEL read support for chan_pjsip. This allows the dialplan
to use the CHANNEL function on a chan_pjsip channel to obtain run-time
information about the channel from the PJSIP channel driver and the PJSIP
stack. This includes:
* RTP information, including source/destination media addresses, whether or
not the media is secure, held, and other properties.
* RTCP information. This includes sets of parseable information, as well as
individual statistic attriutes.
* PJSIP information. This includes URIs, local/remote signalling addresses,
whether or not the signalling is secure, and other properties.
* The endpoint name. This can be used in conjunction with the PJSIP_ENDPOINT
function to obtain more detailed endpoint information.
Review: https://reviewboard.asterisk.org/r/3038/
........
Merged revisions 403618 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@403619 65c4cc65-6c06-0410-ace0-fbb531ad65f3
* Eliminated shadowing of the __ast_sorcery_apply_config() name parameter
causing confusion.
* Fix potential crash from sorcery.conf user input in
__ast_sorcery_apply_config() if the user supplied a malformed config line
that is missing the sorcery object type name.
* Remove redundant test in __ast_sorcery_apply_config(). !config and
config == CONFIGS_STATUS_FILEMISSING are identical.
........
Merged revisions 403541 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@403544 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The snapshot process for endpoints uses the channel ids present
on the endpoint itself. Without keeping a reference it was possible
for the strings to be freed underneath any consumer of an endpoint
snapshot.
A reference is now held by the snapshot to the channel ids and
released when the snapshot is destroyed.
(issue ASTERISK-22801)
Reported by: Matt Jordan
........
Merged revisions 403542 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@403543 65c4cc65-6c06-0410-ace0-fbb531ad65f3
* Make ast_sorcery_observer_remove() accept a const callbacks struct.
* Make ast_sorcery_observer_remove() tolerant of the sorcery parameter
being NULL. Now it can be called within a module unload routine if the
sorcery initialization fails.
* Fix ast_sorcery_observer_add() to fail if the container link fails.
........
Merged revisions 403324 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@403327 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This adds channel locks around calls to create channel snapshots as well
as other functions which operate on a channel and then end up
creating a channel snapshot. Functions that expect the channel to be
locked prior to being called have had their documentation updated to
indicate such.
........
Merged revisions 403311 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@403314 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The patch allows ARI to parse request parameters from an incoming JSON
request body, instead of requiring the request to come in as query
parameters (which is just weird for POST and DELETE) or form
parameters (which is okay, but a bit asymmetric given that all of our
responses are JSON).
For any operation that does _not_ have a parameter defined of type
body (i.e. "paramType": "body" in the API declaration), if a request
provides a request body with a Content type of "application/json", the
provided JSON document is parsed and searched for parameters.
The expected fields in the provided JSON document should match the
query parameters defined for the operation. If the parameter has
'allowMultiple' set, then the field in the JSON document may
optionally be an array of values.
(closes issue ASTERISK-22685)
Review: https://reviewboard.asterisk.org/r/2994/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@403177 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Created a data model and implemented functionality for an ARI device state
resource. The following operations have been added that allow a user to
manipulate an ARI controlled device:
Create/Change the state of an ARI controlled device
PUT /deviceStates/{deviceName}&{deviceState}
Retrieve all ARI controlled devices
GET /deviceStates
Retrieve the current state of a device
GET /deviceStates/{deviceName}
Destroy a device-state controlled by ARI
DELETE /deviceStates/{deviceName}
The ARI controlled device must begin with 'Stasis:'. An example controlled
device name would be Stasis:Example. A 'DeviceStateChanged' event has also
been added so that an application can subscribe and receive device change
events. Any device state, ARI controlled or not, can be subscribed to.
While adding the event, the underlying subscription control mechanism was
refactored so that all current and future resource subscriptions would be
the same. Each event resource must now register itself in order to be able
to properly handle [un]subscribes.
(issue ASTERISK-22838)
Reported by: Matt Jordan
Review: https://reviewboard.asterisk.org/r/3025/
........
Merged revisions 403134 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@403135 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Created the following AMI commands and corresponding events for res_pjsip:
PJSIPShowEndpoints - Provides a listing of all pjsip endpoints and a few
select attributes on each.
Events:
EndpointList - for each endpoint a few attributes.
EndpointlistComplete - after all endpoints have been listed.
PJSIPShowEndpoint - Provides a detail list of attributes for a specified
endpoint.
Events:
EndpointDetail - attributes on an endpoint.
AorDetail - raised for each AOR on an endpoint.
AuthDetail - raised for each associated inbound and outbound auth
TransportDetail - transport attributes.
IdentifyDetail - attributes for the identify object associated with
the endpoint.
EndpointDetailComplete - last event raised after all detail events.
PJSIPShowRegistrationsInbound - Provides a detail listing of all inbound
registrations.
Events:
InboundRegistrationDetail - inbound registration attributes for each
registration.
InboundRegistrationDetailComplete - raised after all detail records have
been listed.
PJSIPShowRegistrationsOutbound - Provides a detail listing of all outbound
registrations.
Events:
OutboundRegistrationDetail - outbound registration attributes for each
registration.
OutboundRegistrationDetailComplete - raised after all detail records
have been listed.
PJSIPShowSubscriptionsInbound - A detail listing of all inbound subscriptions
and their attributes.
Events:
SubscriptionDetail - on each subscription detailed attributes
SubscriptionDetailComplete - raised after all detail records have
been listed.
PJSIPShowSubscriptionsOutbound - A detail listing of all outboundbound
subscriptions and their attributes.
Events:
SubscriptionDetail - on each subscription detailed attributes
SubscriptionDetailComplete - raised after all detail records have
been listed.
(issue ASTERISK-22609)
Reported by: Matt Jordan
Review: https://reviewboard.asterisk.org/r/2959/
........
Merged revisions 403131 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@403133 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This change prevents channels used as implementation details from
leaking out to ARI. It does this by preventing creation of JSON blobs
of channel snapshots created from those channels and sanitizing JSON
blobs of bridge snapshots as they are created. This introduces a
framework for excluding information from output targeted at Stasis
applications on a consumer-by-consumer basis using channel sanitization
callbacks which could be extended to bridges or endpoints if necessary.
This prevents unhelpful error messages from being generated by
ast_json_pack.
This also corrects a bug where BridgeCreated events would not be
created.
(closes issue ASTERISK-22744)
Review: https://reviewboard.asterisk.org/r/2987/
Reported by: David M. Lee
........
Merged revisions 403069 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@403070 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When translating from one format to another it is possible
to inform the translation function that the source frame should
be freed. This was previously done immediately but shortly
afterwards the frame that was freed was accessed and used again.
This change moves code around a bit so that the frame is now
freed after it has been completely used.
(closes issue ASTERISK-22788)
Reported by: Corey Farrell
Patches:
translate-access-after-free-11up.patch uploaded by coreyfarrell (license 5909)
translate-access-after-free-1.8.patch uploaded by coreyfarrell (license 5909)
........
Merged revisions 403014 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 403015 from http://svn.asterisk.org/svn/asterisk/branches/11
........
Merged revisions 403016 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@403017 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This fixes a crash when CELGenUserEvent is called from the dialplan
while CEL is disabled. Currently, CEL does not create its topics and
forwards if it is not enabled and external entities may depend on
these topics blindly since they should always be available. This patch
breaks up route creation and topic/forward creation such that the CEL
topics and forwards will always exist while the router and its
associated routes will be torn down and recreated as necessary.
(closes issue ASTERISK-22799)
Review: https://reviewboard.asterisk.org/r/3010/
Reported by: Matt Jordan
........
Merged revisions 402838 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@402839 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Similar to how background works, if a say application is called with
this variable set to 'true', 'yes', 'on', etc. then using DTMF while
the say action is in progress will result in the channel jumping to
that extension in the dialplan.
Review: https://reviewboard.asterisk.org/r/3011/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@402819 65c4cc65-6c06-0410-ace0-fbb531ad65f3
