* app_minivm: Use built-in completion facilities to complete optional
arguments.
* app_voicemail: Use built-in completion facilities to complete
optional arguments.
* app_confbridge: Add missing colons after 'Usage' text.
* chan_alsa: Use built-in completion facilities to complete optional
arguments.
* chan_sip: Use built-in completion facilities to complete optional
arguments. Add completions for 'load' for 'sip show user', 'sip show
peer', and 'sip qualify peer.'
* chan_skinny: Correct and extend completions for 'skinny reset' and
'skinny show line.'
* func_odbc: Correct completions for 'odbc read' and 'odbc write'
* main/astmm: Use built-in completion facilities to complete arguments
for 'memory' commands.
* main/bridge: Correct completions for 'bridge kick.'
* main/ccss: Use built-in completion facilities to complete arguments
for 'cc cancel' command.
* main/cli: Add 'all' completion for 'channel request hangup.' Correct
completions for 'core set debug channel.' Correct completions for 'core
show calls.'
* main/pbx_app: Remove redundant completions for 'core show
applications.'
* main/pbx_hangup_handler: Remove unused completions for 'core show
hanguphandlers all.'
* res_sorcery_memory_cache: Add completion for 'reload' argument of
'sorcery memory cache stale' and properly implement.
Change-Id: Iee58c7392f6fec34ad9d596109117af87697bbca
This change adds the media stream topology definition and API for
accessing and using it.
Some refactoring of the stream was also done.
ASTERISK-26786
Change-Id: Ic930232d24d5ad66dcabc14e9b359e0ff8e7f568
The original return value corresponded to AST_SIP_AUTHENTICATION_CHALLENGE
but we have no authenticator registered to create the challenge.
Change-Id: I62368180d774b497411b80fbaabd0c80841f8512
In Asterisk 11, if the 'Originate' AMI command failed to connect the provided
Channel while in extension mode, a 'failed' extension would be looked up and
run. This was, I believe, unintentionally removed in 51b6c49. This patch
restores that behavior.
This also adds an enum for the various 'synchronous' modes in an attempt to
make them meaningful.
ASTERISK-26115 #close
Reported by: Nasir Iqbal
Change-Id: I8afbd06725e99610e02adb529137d4800c05345d
This reverts commit 6492e91392.
The change in question was intended to prevent the need to reload in
order to update qualifies on contacts when an AOR changes. However, this
ended up causing a deadlock instead.
Change-Id: I1a835c90a5bb65b6dc3a1e94cddc12a4afc3d71e
The adding and removing of device state subscriptions did not protect
fully against simultaneous manipulation. In particular the subscribe
case allowed a small window where two subscriptions could be added for
the same device state instead of just one.
This change makes the code hold the subscriptions lock for the entirety
of each operation to ensure that two are not occurring at the same time.
ASTERISK-26770
Change-Id: I3e7f8eb9d09de440c9024d2dd52029f6f20e725b
A dialplan intercept routine is equivalent to an interrupt routine. As
such, the routine must be done quickly and you do not have access to the
media stream. These restrictions are necessary because the media stream
is the responsibility of some other code and interfering with or delaying
that processing is bad. A possible future dialplan processing
architecture change may allow the interception routine to run in a
different thread from the main thread handling the media and remove the
execution time restriction.
* Made res_agi.c:run_agi() running an AGI in an interception routine run
in DeadAGI mode. No touchy channel frames.
ASTERISK-25951
ASTERISK-26343
ASTERISK-26716
Change-Id: I638f147ca7a7f2590d7194a8ef4090eb191e4e43
Prior to this change, qualifies would only update in the following
cases:
* A reload of res_pjsip.so was issued.
* A dynamic contact was re-registered after its AOR's qualify_frequency
had been changed
This does not work well if you are using realtime for your AORs. You can
update your database to have a new qualify_frequency, but the permanent
contacts on that AOR will not have their qualifies updated. And the
dynamic contacts on that AOR will not have their qualifies updated until
the next registration, which could be a long time.
This change seeks to fix this problem by making it so that whenever AOR
configuration is applied, the contacts pertaining to that AOR have their
qualifies updated.
Additions from this patch:
* AOR sorcery objects now have an apply handler that calls into a newly
added function in the OPTIONS code. This causes all contacts
associated with that AOR to re-schedule qualifies.
* When it is time to qualify a contact, the OPTIONS code checks to see
if the AOR can still be retrieved. If not, then qualification is
canceled on the contact.
Alterations from this patch:
* The registrar code no longer updates contact's qualify_frequence and
qualify_timeout. There is no point to this since those values already
get updated when the AOR changes.
* Reloading res_pjsip.so no longer calls the OPTIONS initialization
function. Reloading res_pjsip.so results in re-loading AORs, which
results in re-scheduling qualifies.
Change-Id: I2e7c3316da28f389c45954f24c4e9389abac1121
There are some error cases in PJSIP when sending a request that will
result in the callback for the request being invoked. The code did not
handle this case and assumed on every error case that the callback was not
invoked.
The code has been changed to check whether the callback has been invoked
and if so to absorb the error and treat it as a success.
ASTERISK-26679
ASTERISK-26699
Change-Id: I563982ba204da5aa1428989a11c06dd9087fea91
Before Asterisk 13, signed linear was converted into network byte order by a
smoother before being sent over the network. We restore this behavior by
forcing the creation of a smoother when slinear is in use and setting the
appropriate flags so that the byte order conversion is always done.
ASTERISK-24858 #close
Reported-by: Frankie Chin
Change-Id: I868449617d1a7819578f218c8c6b2111ad84f5a9
The escalator works by creating a set of startup commands in cli.conf
that set up logger channels and issue the debug commands for the
subsystems specified. If asterisk is running when it is executed,
the same commands will be issued to the running instance. The original
cli.conf is saved before any changes are made and can be restored by
executing '$prog --reset'.
The log output will be stored in...
$astlogdir/message.$uniqueid
$astlogdir/debug.$uniqueid
$astlogdir/dtmf.$uniqueid
$astlogdir/fax.$uniqueid
$astlogdir/security.$uniqueid
$astlogdir/pjsip_history.$uniqueid
$astlogdir/sip_history.$uniqueid
Some minor tweaks were made to chan_sip, and res_pjsip_history
so their history output could be send to a log channel as packets
are captured.
A minor tweak was also made to manager so events are output to verbose
when "manager set debug on" is issued.
Change-Id: I799f8e5013b86dc5282961b27383d134bf09e543
This change adds a missing unreference of the hostname when resolving and
also cleans up the iterator.
ASTERISK-26735
Change-Id: Ic012ebaf3d89e714eec340b7b0c5e63c66af857a
Marking an object as stale in a memory cache is supposed to prime the
cache so that the next time the item is retrieved, the stale item is
deleted from the cache and a background task is run to re-populate the
cache with a fresh version of the object.
The problem is, there are some object types out there for which there is
no natural reason that they would be retrieved from the backend with any
regularity. Outbound PJSIP registrations are a good example of this. At
startup, they are read, and an object-specific state is created that
refers to the initially-retrieved object for all time.
Adding the "reload" option to the CLI/AMI commands gives the cache the
opportunity to manually re-retrieve the object from the backend, both
storing the new object in the cache and applying the new object's
configuration to the module that uses that object.
Change-Id: Ieb1fe7270ceed491f057ec5cbf0e097bde96c5c8
* channel.c:ast_sendtext(): Fix T.140 SendText memory leak.
* format_compatibility.c: T.140 RED and T.140 were swapped.
* res_rtp_asterisk.c:rtp_red_init(): Fix ast_format_t140_red ref leak.
* res_rtp_asterisk.c:rtp_red_init(): Fix data race after starting periodic
scheduled red_write().
* res_rtp_asterisk.c: Some other minor misc tweaks.
Change-Id: Ifa27a2e0f8a966b1cf628607c86fc4374b0b88cb
When configuring a match using a netmask the error variable was
not defaulting to 0. For some people this would cause the code
to think an error occurred when adding the match when in reality
it added perfectly fine.
ASTERISK-26693
Change-Id: I850c250813742bddde65c84e739093c9e01dfe56
The mechanism used for detecting the maximum log level compiled into the
linked pjproject did not work. The API call simply stores the requested
level into an integer and does no range checking. Asterisk was assuming
that there was range checking and limited the new value to the allowable
range. To get the actual maximum log level compiled into the linked
pjproject we need to get and save off the initial set log level from
pjproject. This is the maximum log level supported.
* Get and save off the initial log level setting before altering it to the
desired level on startup. This has to be done by a macro rather than
calling a core function to avoid incorrectly linking pjproject.
* Split the initial log level warning messages to warn if the linked
pjproject cannot support the requested startup level and if it is too low
to get the pjproject buildopts for "pjproject show buildopts".
* Adjust the CLI "pjproject set log level" to check the saved max log
level and to generate normal output messages instead of a warning message.
ASTERISK-26743 #close
Change-Id: I40aa76653e2a1dece66c3f8734594b4f0471cfb4
If endpoint ACLs were specified, they were not being freed
when endpoints were destroyed. On systems with realtime endpoints, this
could add up quickly since each DB lookup would allocate the ACL without
freeing it.
ASTERISK-26731 #close
Reported by Ustinov Artem
Change-Id: Ie1f8bf5b7a0de628c975beba01e69c56893331ad
The 'ari set debug' command has been enhanced to accept 'all' as an
application name. This allows dumping of all apps even if an app
hasn't registered yet. To accomplish this, a new global_debug global
variable was added to res/stasis/app.c and new APIs were added to
set and query the value.
'ari set debug' now displays requests and responses as well as events.
This required refactoring the existing debug code.
* The implementation for 'ari set debug' was moved from stasis/cli.{c,h}
to ari/cli.{c,h}, and stasis/cli.{c,h} were deleted.
* In order to print the body of incoming requests even if a request
failed, the consumption of the body was moved from the ari stubs
to ast_ari_callback in res_ari.c and the moustache templates were
then regenerated. The body is now passed to ast_ari_invoke and then
on to the handlers. This results in code savings since that template
was inserted multiple times into all the stubs.
An additional change was made to the ao2_str_container implementation
to add partial key searching and a sort function. The existing cli
code assumed it was already there when it wasn't so the tab completion
was never working.
Change-Id: Ief936f747ce47f1fb14035fbe61152cf766406bf
(cherry picked from commit 1d890874f3)
An option has been added, srv_lookups, which controls whether
SRV lookups are performed on the provided match hosts or not.
It was possible for this option to be applied after resolution
had already happened.
This change makes it so hosts are stored away, settings are read
and applied, and then resolution is done. This ensures that no
matter the ordering the srv_lookups option is in effect.
ASTERISK-26735
Change-Id: I750378cb277be0140f8c5539450270afbfc43388
This change adds experimental support for providing RTCP
feedback information to codec modules so they can dynamically
change themselves based on conditions.
ASTERISK-26584
Change-Id: Ifd6aa77fb4a7ff546c6025900fc2baf332c31857
Fix the AMI PJSIPShowSubscriptionsInbound, PJSIPShowSubscriptionsOutbound,
and PJSIPShowResourceLists actions event counts. The reported counts may
not necessarily be accurate depending on what happens.
The subscriptions count would be wrong if Asterisk ever has outbound
subscriptions.
The resource list count could be wrong if a list were added or removed
during the AMI action being processed.
Change-Id: I4344301827523fa174960a42c413fd19abe4aed5
zuul
Joshua Colp
Sean Bright
George Joseph
Richard Mudgett
Mark Michelson
Lorenzo Miniero