When repeatedly starting/stopping a Monitor on a channel, the accumulated
in/out sample counts are never reset to 0. This can cause inadvertent jumps
in the recordings, as the code in the channel core will determine incorrectly
that a jump in the recorded file position should occur. Setting the sample
counts to 0 simply reflects the initial state a Monitor should be in when it
is started, as this is the initial count that would be on the channels at that
time.
ASTERISK-24573 #close
Reported by: Nuno Borges
patches:
24573.patch uploaded by Nuno Borges (License 6116)
........
Merged revisions 429031 from http://svn.asterisk.org/svn/asterisk/branches/11
........
Merged revisions 429032 from http://svn.asterisk.org/svn/asterisk/branches/12
........
Merged revisions 429033 from http://svn.asterisk.org/svn/asterisk/branches/13
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@429034 65c4cc65-6c06-0410-ace0-fbb531ad65f3
For some odd reason, loading app_mixmonitor was fine, but res_monitor was not.
This patch fixes a set of issues related to func_periodic_hook exporting the
beep functions that gets res_monitor working again.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@412910 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Add an option to enable a periodic beep to be played into a call if it
is being recorded. If enabled, it uses the PERIODIC_HOOK() function
internally to play the 'beep' prompt into the call at a specified
interval. This option is provided for both Monitor() and
MixMonitor().
Review: https://reviewboard.asterisk.org/r/3424/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@412427 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This app is pretty ancient, so it was never converted to use the
option parsing helper code. I'd like to add an option to this app
that takes an argument, and that's a pain to do when not using this
helper, so start by doing this conversion.
Review: https://reviewboard.asterisk.org/r/3429/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@412102 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch is the initial push to update Asterisk's CDR engine for the new
bridging framework. This patch guts the existing CDR engine and builds the new
on top of messages coming across Stasis. As changes in channel state and bridge
state are detected, CDRs are built and dispatched accordingly. This
fundamentally changes CDRs in a few ways.
(1) CDRs are now *very* reflective of the actual state of channels and bridges.
This means CDRs track well with what an actual channel is doing - which
is useful in transfer scenarios (which were previously difficult to pin
down). It does, however, mean that CDRs cannot be 'fooled'. Previous
behavior in Asterisk allowed for CDR applications, channels, and other
properties to be spoofed in parts of the code - this no longer works.
(2) CDRs have defined behavior in multi-party scenarios. This behavior will not
be what everyone wants, but it is a defined behavior and as such, it is
predictable.
(3) The CDR manipulation functions and applications have been overhauled. Major
changes have been made to ResetCDR and ForkCDR in particular. Many of the
options for these two applications no longer made any sense with the new
framework and the (slightly) more immutable nature of CDRs.
There are a plethora of other changes. For a full description of CDR behavior,
see the CDR specification on the Asterisk wiki.
(closes issue ASTERISK-21196)
Review: https://reviewboard.asterisk.org/r/2486/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@391947 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When ast_channel_cached_blob_create was merged,
ast_channel_blob_create_from_cache was partially removed in an
unresolved merge conflict. This restores ast_channel_blob_create_from_cache
and refactors usage of ast_channel_cached_blob_create (requires an
ast_channel) to use ast_channel_blob_create_from_cache (requires a
channel uniqueid) instead.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@389974 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch moves a number of AMI events over to the Stasis-Core message bus.
This includes:
* ChanSpyStart/Stop
* MonitorStart/Stop
* MusicOnHoldStart/Stop
* FullyBooted/Reload
* All Voicemail/MWI related events
In addition, it adds some Stasis-Core and AMI support for generic AMI messages,
refactors the message router in AMI to use a single router with topic
forwarding for the topics that AMI cares about, and refactors MWI message
types and topics to be more name compliant.
Review: https://reviewboard.asterisk.org/r/2532
(closes issue ASTERISK-21462)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@389733 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This resolves core findings from ASTERISK-19650 numbers 0-2, 6, 7, 9-11, 14-20,
22-24, 28, 30-32, 34-36, 42-56, 82-84, 87, 89-90, 93-102, 104, 105, 109-111,
and 115. Finding numbers 26, 33, and 29 were already resolved. Those skipped
were either extended/deprecated or in areas of code that shouldn't be
disturbed.
(Closes issue ASTERISK-19650)
........
Merged revisions 366167 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 366168 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@366169 65c4cc65-6c06-0410-ace0-fbb531ad65f3
I also went ahead and took a little time to make sure that the manager value
AMI_SUCCESS was used instead of just return 0 being thrown around everywhere since that's
how we handle this stuff these days.
(closes issue ASTERISK-19249)
Reporter: Jamuel Starkey
Patches:
res_monitor.c-ASTERISK-19249.diff uploaded by Jamuel Starkey (license 5766)
........
Merged revisions 352959 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 352965 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@352981 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Continue channel opaque-ification by wrapping all of the stringfields.
Eventually, we will restrict what can actually set these variables, but
the purpose for now is to hide the implementation and keep people from
adding code that directly accesses the channel structure. Semantic
changes will follow afterward.
Review: https://reviewboard.asterisk.org/r/1661/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@352348 65c4cc65-6c06-0410-ace0-fbb531ad65f3
There are many benefits to making the ast_channel an opaque handle, from
increasing maintainability to presenting ways to kill masquerades. This patch
kicks things off by taking things a field at a time, renaming the field to
'__do_not_use_${fieldname}' and then writing setters/getters and converting the
existing code to using them. When all fields are done, we can move ast_channel
to a C file from channel.h and lop off the '__do_not_use_'.
This patch sets up main/channel_interal_api.c to be the only file that actually
accesses the ast_channel's fields directly. The intent would be for any API
functions in channel.c to use the accessor functions. No more monkeying around
with channel internals. We should use our own APIs.
The interesting changes in this patch are the addition of
channel_internal_api.c, the moving of the AST_DATA stuff from channel.c to
channel_internal_api.c (note: the AST_DATA stuff will have to be reworked to
use accessor functions when ast_channel is really opaque), and some re-working
of the way channel iterators/callbacks are handled so as to avoid creating fake
ast_channels on the stack to pass in matching data by directly accessing fields
(since "name" is a stringfield and the fake channel doesn't init the
stringfields, you can't use the ast_channel_name_set() function). I went with
ast_channel_name(chan) for a getter, and ast_channel_name_set(chan, name) for a
setter.
The majority of the grunt-work for this change was done by writing a semantic
patch using Coccinelle ( http://coccinelle.lip6.fr/ ).
Review: https://reviewboard.asterisk.org/r/1655/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@350223 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r258775 | tilghman | 2010-04-25 13:09:05 -0500 (Sun, 25 Apr 2010) | 6 lines
When StopMonitor is called, ensure that it will not be restarted by a channel event.
(closes issue #16590)
Reported by: kkm
Patches:
resmonitor-16590-trunk.239289.diff uploaded by kkm (license 888)
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@258776 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r254235 | jpeeler | 2010-03-23 19:37:23 -0500 (Tue, 23 Mar 2010) | 72 lines
Ensure that monitor recordings are written to the correct location (again)
This is an extension to 248860. As such the dialplan test has been extended:
; non absolute path, not combined
exten => 5040, 1, monitor(wav,tmp/jeff/monitor_test)
exten => 5040, n, dial(sip/5001)
; absolute path, not combined
exten => 5041, 1, monitor(wav,/tmp/jeff/monitor_test2)
exten => 5041, n, dial(sip/5001)
; no path, not combined
exten => 5042, 1, monitor(wav,monitor_test3)
exten => 5042, n, dial(sip/5001)
; combined: changemonitor from non absolute to no path (leaves tmp/jeff)
exten => 5043, 1, monitor(wav,tmp/jeff/monitor_test4,m)
exten => 5043, n, changemonitor(monitor_test5)
exten => 5043, n, dial(sip/5001)
; combined: changemonitor from no path to non absolute path
exten => 5044, 1, monitor(wav,monitor_test6,m)
exten => 5044, n, changemonitor(tmp/jeff/monitor_test7) ; this wasn't possible before
exten => 5044, n, dial(sip/5001)
; non absolute path, combined
exten => 5045, 1, monitor(wav,tmp/jeff/monitor_test8,m)
exten => 5045, n, dial(sip/5001)
; absolute path, combined
exten => 5046, 1, monitor(wav,/tmp/jeff/monitor_test9,m)
exten => 5046, n, dial(sip/5001)
; no path, combined
exten => 5047, 1, monitor(wav,monitor_test10,m)
exten => 5047, n, dial(sip/5001)
; combined: changemonitor from non absolute to absolute (leaves tmp/jeff)
exten => 5048, 1, monitor(wav,tmp/jeff/monitor_test11,m)
exten => 5048, n, changemonitor(/tmp/jeff/monitor_test12)
exten => 5048, n, dial(sip/5001)
; combined: changemonitor from absolute to non absolute (leaves /tmp/jeff)
exten => 5049, 1, monitor(wav,/tmp/jeff/monitor_test13,m)
exten => 5049, n, changemonitor(tmp/jeff/monitor_test14)
exten => 5049, n, dial(sip/5001)
; combined: changemonitor from no path to absolute
exten => 5050, 1, monitor(wav,monitor_test15,m)
exten => 5050, n, changemonitor(/tmp/jeff/monitor_test16)
exten => 5050, n, dial(sip/5001)
; combined: changemonitor from absolute to no path (leaves /tmp/jeff)
exten => 5051, 1, monitor(wav,/tmp/jeff/monitor_test17,m)
exten => 5051, n, changemonitor(monitor_test18)
exten => 5051, n, dial(sip/5001)
; not combined: changemonitor from non absolute to no path (leaves tmp/jeff)
exten => 5052, 1, monitor(wav,tmp/jeff/monitor_test19)
exten => 5052, n, changemonitor(monitor_test20)
exten => 5052, n, dial(sip/5001)
; not combined: changemonitor from no path to non absolute
exten => 5053, 1, monitor(wav,monitor_test21)
exten => 5053, n, changemonitor(tmp/jeff/monitor_test22)
exten => 5053, n, dial(sip/5001)
; not combined: changemonitor from non absolute to absolute (leaves tmp/jeff)
exten => 5054, 1, monitor(wav,tmp/jeff/monitor_test23)
exten => 5054, n, changemonitor(/tmp/jeff/monitor_test24)
exten => 5054, n, dial(sip/5001)
; not combined: changemonitor from absolute to non absolute (leaves /tmp/jeff)
exten => 5055, 1, monitor(wav,/tmp/jeff/monitor_test24)
exten => 5055, n, changemonitor(tmp/jeff/monitor_test25)
exten => 5055, n, dial(sip/5001)
; not combined: changemonitor from no path to absolute
exten => 5056, 1, monitor(wav,monitor_test26)
exten => 5056, n, changemonitor(/tmp/jeff/monitor_test27)
exten => 5056, n, dial(sip/5001)
; not combined: changemonitor from absolute to no path (leaves /tmp/jeff)
exten => 5057, 1, monitor(wav,/tmp/jeff/monitor_test28)
exten => 5057, n, changemonitor(monitor_test29)
exten => 5057, n, dial(sip/5001)
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@254277 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r248860 | jpeeler | 2010-02-25 15:22:06 -0600 (Thu, 25 Feb 2010) | 18 lines
Ensure that monitor recordings are written to the correct location (again)
This is an extension to 248757. As such the dialplan test has been extended:
exten => 5040, 1, monitor(wav,tmp/jeff/monitor_test,b)
exten => 5040, n, dial(sip/5001)
exten => 5041, 1, monitor(wav,/tmp/jeff/monitor_test2,b)
exten => 5041, n, dial(sip/5001)
exten => 5042, 1, monitor(wav,monitor_test3,b)
exten => 5042, n, dial(sip/5001)
exten => 5043, 1, monitor(wav,tmp/jeff/monitor_test3,m)
exten => 5043, n, changemonitor(monitor_test4)
exten => 5043, n, dial(sip/5001)
exten => 5044, 1, monitor(wav,monitor_test4,m)
exten => 5044, n, changemonitor(tmp/jeff/monitor_test5) ; this looks to fail by design and emits a warning
exten => 5044, n, dial(sip/5001)
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@248952 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r248757 | jpeeler | 2010-02-25 12:06:54 -0600 (Thu, 25 Feb 2010) | 15 lines
Ensure that monitor recordings are written to the correct location.
Recordings should be placed in the monitor directory when a non-absolute path
is used.
Exact dialplan used for testing:
exten => 5040, 1, monitor(wav,tmp/jeff/monitor_test,b)
exten => 5040, n, dial(sip/5001)
exten => 5041, 1, monitor(wav,/tmp/jeff/monitor_test2,b)
exten => 5041, n, dial(sip/5001)
exten => 5042, 1, monitor(wav,monitor_test3,b)
exten => 5042, n, dial(sip/5001)
ABE-2101
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@248793 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r235940 | jpeeler | 2009-12-21 13:43:41 -0600 (Mon, 21 Dec 2009) | 13 lines
Change Monitor to not assume file to write to does not contain pathing.
227944 changed the fname_base argument to always append the configured monitor
path. This change was necessary to properly compare files for uniqueness.
If a full path is given though, nothing needs to be appended and that is
handled correctly now.
(closes issue #16377)
(closes issue #16376)
Reported by: bcnit
Patches:
res_monitor.c-issue16376-1.patch uploaded by dant (license 670)
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@235941 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r227944 | jpeeler | 2009-11-04 17:47:08 -0600 (Wed, 04 Nov 2009) | 14 lines
Fix incorrect filename comparsion after monitor file change
The logic to detect if a requested file is indeed a different file from the
current file was incorrect. The main issue being confusion of the use of
filename_base which was previously set without pathing information and then
compared to another full path. Robust file comparison logic has been added
to properly check if two files are the same even if symlinks are used.
(closes issue #15313)
Reported by: caspy
Patches:
20091103__issue15313__1.4.diff.txt uploaded by jpeeler (license 325)
but mostly tilghman's work
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@227945 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch provides a new implementation of the optional API support defined
in asterisk/optional_api.h; this new version provides solves compatibility
issues with the use of linker version scripts for suppressing global symbols.
In addition, there is now a functional (and tested!) implementation for Mac OS/X,
so module writers no longer need to use special tests before calling optional
API functions. All future implementations must provide these same semantics,
so that module writers can rely on them.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@200519 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Moved more static docs to XML (pplications and manager actions):
Monitor, StopMonitor, ChangeMonitor, PauseMonitor, UnpauseMonitor.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@198661 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch adds 'const' tags to a number of Asterisk APIs where they are appropriate (where the API already demanded that the function argument not be modified, but the compiler was not informed of that fact). The list includes:
- CLI command handlers
- CLI command handler arguments
- AGI command handlers
- AGI command handler arguments
- Dialplan application handler arguments
- Speech engine API function arguments
In addition, various file-scope and function-scope constant arrays got 'const' and/or 'static' qualifiers where they were missing.
Review: https://reviewboard.asterisk.org/r/251/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@196072 65c4cc65-6c06-0410-ace0-fbb531ad65f3
There is a lot that could be said about this, but the patch is a big
improvement for performance, stability, code maintainability,
and ease of future code development.
The channel list is no longer an unsorted linked list. The main container
for channels is an astobj2 hash table. All of the code related to searching
for channels or iterating active channels has been rewritten. Let n be
the number of active channels. Iterating the channel list has gone from
O(n^2) to O(n). Searching for a channel by name went from O(n) to O(1).
Searching for a channel by extension is still O(n), but uses a new method
for doing so, which is more efficient.
The ast_channel object is now a reference counted object. The benefits
here are plentiful. Some benefits directly related to issues in the
previous code include:
1) When threads other than the channel thread owning a channel wanted
access to a channel, it had to hold the lock on it to ensure that it didn't
go away. This is no longer a requirement. Holding a reference is
sufficient.
2) There are places that now require less dealing with channel locks.
3) There are places where channel locks are held for much shorter periods
of time.
4) There are places where dealing with more than one channel at a time becomes
_MUCH_ easier. ChanSpy is a great example of this. Writing code in the
future that deals with multiple channels will be much easier.
Some additional information regarding channel locking and reference count
handling can be found in channel.h, where a new section has been added that
discusses some of the rules associated with it.
Mark Michelson also assisted with the development of this patch. He did the
conversion of ChanSpy and introduced a new API, ast_autochan, which makes it
much easier to deal with holding on to a channel pointer for an extended period
of time and having it get automatically updated if the channel gets masqueraded.
Mark was also a huge help in the code review process.
Thanks to David Vossel for his assistance with this branch, as well. David
did the conversion of the DAHDIScan application by making it become a wrapper
for ChanSpy internally.
The changes come from the svn/asterisk/team/russell/ast_channel_ao2 branch.
Review: http://reviewboard.digium.com/r/203/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@190423 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r183700 | mmichelson | 2009-03-23 12:59:28 -0500 (Mon, 23 Mar 2009) | 7 lines
Fix a memory leak in res_monitor.c
The only way that this leak would occur is if Monitor were started
using the Manager interface and no File: header were given. Discovered
while reviewing the ast_channel_ao2 review request.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@183766 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r101531 | mmichelson | 2008-01-31 15:00:24 -0600 (Thu, 31 Jan 2008) | 10 lines
1. Prevent the addition of an extra '/' to the beginning of an absolute pathname.
2. If ast_monitor_change_fname is called and the new filename is the same as the old, then exit early and don't set the
filename_changed field in the monitor structure. Setting it in this case was causing ast_monitor_stop to erroneously
delete them.
(closes issue #11741)
Reported by: garlew
Tested by: putnopvut
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@101532 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r94122 | mmichelson | 2007-12-19 17:02:22 -0600 (Wed, 19 Dec 2007) | 6 lines
Sox versions 13.0.0 and newer do not have "soxmix" and instead use sox -m. res_monitor
needs to use this if the user does not have soxmix.
(closes issue #11589, reported by amessina, patch inspired by amessina but with a flourish from me)
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@94123 65c4cc65-6c06-0410-ace0-fbb531ad65f3
modified.
This requires casting the strings in asterisk.c when writing to
them, so we do it through a macro to do it consistently.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@93603 65c4cc65-6c06-0410-ace0-fbb531ad65f3
build times - tested, there is no measureable difference before and
after this commit.
In this change:
use asterisk/compat.h to include a small set of system headers:
inttypes.h, unistd.h, stddef.h, stddint.h, sys/types.h, stdarg.h,
stdlib.h, alloca.h, stdio.h
Where available, the inclusion is conditional on HAVE_FOO_H as determined
by autoconf.
Normally, source files should not include any of the above system headers,
and instead use either "asterisk.h" or "asterisk/compat.h" which does it
better.
For the time being I have left alone second-level directories
(main/db1-ast, etc.).
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@89333 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Also fix a common typo I kept seeing (arguement) in various files.
Closes issue #11222, patch by snuffy (with arguement > argument by me).
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@89202 65c4cc65-6c06-0410-ace0-fbb531ad65f3