app_voicemail. Instead, include it where it is needed. This turned out to be a
relatively minor issue because other headers include logger.h as well.
Need to test -addons before merging this back to 1.6.0.
(closes issue #13605)
Reported by: tomo1657
Patches:
13605_seanbright.diff uploaded by seanbright (license 71)
Tested by: mmichelson
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@148200 65c4cc65-6c06-0410-ace0-fbb531ad65f3
read the Urgent flag value from the IMAP headers.
(closes issue #13652)
Reported by: jaroth
Patches:
imapheaders.patch uploaded by jaroth (license 50)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@148144 65c4cc65-6c06-0410-ace0-fbb531ad65f3
adding the imapsecret alias for imappassword. Will rethink this one and
give it another shot on a rainy day TBD.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@147265 65c4cc65-6c06-0410-ace0-fbb531ad65f3
so include 'imapsecret' as an alias to 'imappassword' (and print a little notice
nudging users toward the right option name).
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@147191 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This allows for the ODBC parts to work on OpenBSD as well.
99.99% of the work is done by seanbright (bow, bow) and I actually
did nothing but test and yell at him that it still didn't work :)
Thanks for helping out !
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@146925 65c4cc65-6c06-0410-ace0-fbb531ad65f3
when a file is invalid from when a file is missing. This is most important when
we have two configuration files. Consider the following example:
Old system:
sip.conf users.conf Old result New result
======== ========== ========== ==========
Missing Missing SIP doesn't load SIP doesn't load
Missing OK SIP doesn't load SIP doesn't load
Missing Invalid SIP doesn't load SIP doesn't load
OK Missing SIP loads SIP loads
OK OK SIP loads SIP loads
OK Invalid SIP loads incompletely SIP doesn't load
Invalid Missing SIP doesn't load SIP doesn't load
Invalid OK SIP doesn't load SIP doesn't load
Invalid Invalid SIP doesn't load SIP doesn't load
So in the case when users.conf doesn't load because there's a typo that
disrupts the syntax, we may only partially load users, instead of failing with
an error, which may cause some calls not to get processed. Worse yet, the old
system would do this with no indication that anything was even wrong.
(closes issue #10690)
Reported by: dtyoo
Patches:
20080716__bug10690.diff.txt uploaded by Corydon76 (license 14)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@142992 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r140751 | mmichelson | 2008-09-02 18:47:49 -0500 (Tue, 02 Sep 2008) | 6 lines
After adding the context checking to app_voicemail
for IMAP storage, I left out a crucial place to
copy the context to the vm_state structure. This
is the correction.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@140752 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r140421 | mmichelson | 2008-08-29 11:01:07 -0500 (Fri, 29 Aug 2008) | 12 lines
Add context checking when retrieving a vm_state.
This was causing a problem for people who had identically
named mailboxes in separate voicemail contexts.
This commit affects IMAP storage only.
(closes issue #13194)
Reported by: moliveras
Patches:
13194.patch uploaded by putnopvut (license 60)
Tested by: putnopvut, moliveras
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@140422 65c4cc65-6c06-0410-ace0-fbb531ad65f3
trunk.
For an explanation of what "imap_consistency" is,
please see svn revision 134223 to the 1.4 branch.
Coincidentally, this also fixes a recent bug report
regarding the inability to save messages to the new
folder when using IMAP storage since they will would
be flagged as "seen" and not be recognized as new
messages.
(closes issue #13234)
Reported by: jaroth
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@136715 65c4cc65-6c06-0410-ace0-fbb531ad65f3
such as "Work" and "Family" would be subfolders of the
INBOX. This is an invalid assumption to make, but it could
be desirable to set up folders in this manner, so a new
option for voicemail.conf, "imapparentfolder" has been
added to allow for this.
(closes issue #13142)
Reported by: jaroth
Patches:
parentfolder.patch uploaded by jaroth (license 50)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@135067 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r130959 | tilghman | 2008-07-15 12:19:13 -0500 (Tue, 15 Jul 2008) | 8 lines
astman_send_error does not need a newline appended -- the API takes care of
that for us.
(closes issue #13068)
Reported by: gknispel_proformatique
Patches:
asterisk_1_4_astman_send.patch uploaded by gknispel (license 261)
asterisk_trunk_astman_send.patch uploaded by gknispel (license 261)
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@131044 65c4cc65-6c06-0410-ace0-fbb531ad65f3
fn2 was used in three functions. In every case, it was initialized
in the function it was used in. This meant there was no need
to have it in a malloc'd structure just taking up space. Furthermore
two of the functions it was used in were completely unnecessary since
fn2 was set to exactly the same value as the vm_state's fn string.
fn2 was a char array sized at PATH_MAX. On my system, PATH_MAX is
4096. This equates to a 4K memory savings per vm_state allocated.
Since there is a vm_state malloc'd for every voicemail user on
the system, this could potentially add up nicely if there are lots
of users. In addition, a vm_state is allocated on the stack each
time a caller calls the VoiceMailMain application, meaning that
there is a significant stack savings with this patch too.
Of course, a single vm_state struct still takes up approximately
20K on my system (when using IMAP storage. Without IMAP storage,
there would be about another 300 bytes fewer usage), even with
this removal. Further optimizations are probably possible,
but most likely not as easy as this one.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@129734 65c4cc65-6c06-0410-ace0-fbb531ad65f3
app_voicemail would attempt to play a file called vm-foo instead of playing
vm-INBOX to play the "new" sound file. This commit fixes that issue.
This may fix one of the problems reported in issue #12987
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@128731 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r124910 | tilghman | 2008-06-24 16:08:52 -0500 (Tue, 24 Jun 2008) | 8 lines
Occasionally control characters find their way into CallerID. These need to
be stripped prior to placing CallerID in the headers of an email.
(closes issue #12759)
Reported by: RobH
Patches:
20080602__bug12759__2.diff.txt uploaded by Corydon76 (license 14)
Tested by: RobH
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@124912 65c4cc65-6c06-0410-ace0-fbb531ad65f3
1. Filenames had an extra "msg" in the attachment name
2. The attachment was being saved twice
(closes issue #12894)
Reported by: jaroth
Patches:
imap_attach.patch uploaded by jaroth (license 50)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@124180 65c4cc65-6c06-0410-ace0-fbb531ad65f3
They want (char *)NULL as sentinel.
An example is OpenBSD (confirmed on 4.3) that ships with gcc 3.3.4
This commit introduces a contstant SENTINEL which is declared as:
#define SENTINEL ((char *)NULL)
All places I could test compile on my openbsd system are converted.
Update CODING-GUIDELINES to tell about this constant.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@124127 65c4cc65-6c06-0410-ace0-fbb531ad65f3
to be marked urgent. This fixes that issue.
(closes issue #12895)
Reported by: jaroth
Patches:
urgent_forwarding.patch uploaded by jaroth (license 50)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@123867 65c4cc65-6c06-0410-ace0-fbb531ad65f3
likely that after the event is freed, we no longer refer to valid memory.
(closes issue #12712)
Reported by: tomo1657
Patches:
12712.patch uploaded by putnopvut (license 60)
Tested by: tomo1657
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@118157 65c4cc65-6c06-0410-ace0-fbb531ad65f3
the urgent messages are not in their own folder but are actually "flagged" messages
in the INBOX.
(closes issue #12659)
Reported by: jaroth
Patches:
urgentfolder_v2.patch uploaded by jaroth (license 50)
Tested by: jaroth
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@116594 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The behavior in 1.4 was that it would use the current context if an exitcontext existed.
(closes issue #12605)
Reported by: kenjreno
Patches:
12605-starexit.diff uploaded by qwell (license 4)
Tested by: file
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@116407 65c4cc65-6c06-0410-ace0-fbb531ad65f3
marked "urgent" are considered to be higher priority than other messages
and so they will be played before any other messages in a user's mailbox.
There are two ways to leave an urgent message.
1. send the 'U' option to VoiceMail().
2. Set review=yes in voicemail.conf. This will give instructions for
a caller to mark a message as urgent after the message has been recorded.
I have tested that this works correctly with file and ODBC storage, and James
Rothenberger (who wrote initial support for this feature) has tested its use
with IMAP storage.
(closes issue #11817)
Reported by: jaroth
Based on branch http://svn.digium.com/svn/asterisk/team/jrothenberger/asterisk-urgent
Tested by: putnopvut, jaroth
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@115588 65c4cc65-6c06-0410-ace0-fbb531ad65f3
since another thread could remove them.
(closes issue #12541)
Reported by: snuffy
Patches:
bug_12156_apps.diff uploaded by snuffy (license 35)
Several additional changes by me
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@114904 65c4cc65-6c06-0410-ace0-fbb531ad65f3
functions in app_directory can be removed since the ODBC-specific lookups are accomplished
within app_voicemail. This change greatly reduces the amount of lines in app_directory that
were solely for the purpose of looking up a name when ODBC_STORAGE is specified for voicemail.
This commit also makes the name-saying interruptable via DTMF.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@114834 65c4cc65-6c06-0410-ace0-fbb531ad65f3
party to be spoken instead of the channel name or number.
This was accomplished by adding a new function pointer to point to a function in app_voicemail
which retrieves the name file and plays it. This makes for an easy way that applications may play
a user's name should it be necessary. app_directory, in particular, can be simplified greatly by
this change.
This change comes as a suggestion from Switchvox, which already has this feature. AST-23
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@114813 65c4cc65-6c06-0410-ace0-fbb531ad65f3
if using IMAP storage for voicemail. The comment will be recorded and attached
as a second attachment in addition to the original message. This will be invoked
if you choose to prepend a message the way you would with file or ODBC storage
(closes issue #12028)
Reported by: jaroth
Patches:
forward_with_comment_v2.patch uploaded by jaroth (license 50)
Tested by: jaroth
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@114656 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This fixes a bug that was thought to be fixed already.
app_voicemail, if using IMAP_STORAGE, has a problem because
the IMAP header files include syslog.h, which define LOG_WARNING
and LOG_DEBUG to be different than what Asterisk uses for those
same macros. This was "fixed" in the past by including all the
IMAP header files prior to including asterisk.h. This fix worked...
unless you were to try to compile with MALLOC_DEBUG. MALLOC_DEBUG
prepends the inclusion of astmm.h to every file, which means that no
matter what order the includes are in in app_voicemail, the unexpected
values for LOG_WARNING and LOG_DEBUG will be in place.
The action taken for this fix was to define AST_LOG_* macros in addition
to the LOG_* macros already defined. These new macros are used in app_voicemail.c,
logger.h, and astobj.h right now, and their use will be encouraged in the future.
In consideration of those who have written third-party modules which use
the LOG_* macros, these will NOT be removed from the source, however future use
of these macros is discouraged.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@114577 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This makes IMAP_STORAGE include the proper headers if you
have specified the "system" option for --with-imap when running
the configure script and your IMAP-related headers exist in
/usr/include/c-client.
This change is due to a hasty merge of a 1.4 change I made.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@114575 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The variable name "flag" to distinguish between whether a message is being forwarded or
is new is not a helpful name. The newly added doxygen documentation to app_voicemail is
tremendously helpful, but I still just...hate this variable name. I think is_new_message
is more indicative of what its purpose is.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@113207 65c4cc65-6c06-0410-ace0-fbb531ad65f3
(same patch as before, I just split this part out)
(close issue #12326)
Reported by: travishein
Patches:
app_voicemail_code_documentation.patch uploaded by travishein (license 385)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@111774 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r111049 | mmichelson | 2008-03-26 14:22:16 -0500 (Wed, 26 Mar 2008) | 9 lines
Add a lock to the vm_state structure and use the lock around mail_open calls
to prevent concurrent access of the same mailstream. This, along with trunk's
ability to configure TCP timeouts for IMAP storage will help to prevent
crashes and hangs when using voicemail with IMAP storage.
(closes issue #10487)
Reported by: ewilhelmsen
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@111067 65c4cc65-6c06-0410-ace0-fbb531ad65f3
actual problems, per se. I also added format attributes to any printf wrapper functions I found that didn't have them. -Wsecurity and -Wmissing-format-attribute added to --enable-dev-mode.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@109447 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r104119 | russell | 2008-02-25 18:25:29 -0600 (Mon, 25 Feb 2008) | 33 lines
Merge changes from team/russell/smdi-1.4
This commit brings in a significant set of changes to the SMDI support in Asterisk.
There were a number of bugs in the current implementation, most notably being that
it was very likely on busy systems to pop off the wrong message from the SMDI message
queue. So, this set of changes fixes the issues discovered as well as introducing
some new ways to use the SMDI support which are required to avoid the bugs with
grabbing the wrong message off of the queue.
This code introduces a new interface to SMDI, with two dialplan functions. First,
you get an SMDI message in the dialplan using SMDI_MSG_RETRIEVE() and then you access
details in the message using the SMDI_MSG() function. A side benefit of this is that
it now supports more than just chan_zap.
For example, with this implementation, you can have some FXO lines being terminated
on a SIP gateway, but the SMDI link in Asterisk.
Another issue with the current implementation is that it is quite common that the
station ID that comes in on the SMDI link is not necessarily the same as the Asterisk
voicemail box. There are now additional directives in the smdi.conf configuration
file which let you map SMDI station IDs to Asterisk voicemail boxes.
Yet another issue with the current SMDI support was related to MWI reporting over
the SMDI link. The current code could only report a MWI change when the change
was made by someone calling into voicemail. If the change was made by some other
entity (such as with IMAP storage, or with a web interface of some kind), then the
MWI change would never be sent. The SMDI module can now poll for MWI changes if
configured to do so.
This work was inspired by and primarily done for the University of Pennsylvania.
(also related to issue #9260)
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@104120 65c4cc65-6c06-0410-ace0-fbb531ad65f3