This way the libraries can be found even if they are in
non-standard locations.
(closes issue #16155)
Reported by: jcollie
Patches:
0008-change-configure.ac-to-look-for-pkg-config-gmime-2.0.patch uploaded by jcollie (license 412)
Tested by: jsmith, tilghman, pabelanger
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@270042 65c4cc65-6c06-0410-ace0-fbb531ad65f3
After 5 years in mantis and over a year on reviewboard, SRTP support is finally
being comitted. This includes generic CHANNEL dialplan functions that work for
getting the status of whether a call has secure media or signaling as defined
by the underlying channel technology and for setting whether or not a new
channel being bridged to a calling channel should have secure signaling or
media. See doc/tex/secure-calls.tex for examples.
Original patch by mikma, updated for trunk and revised by me.
(closes issue #5413)
Reported by: mikma
Tested by: twilson, notthematrix, hemanshurpatel
Review: https://reviewboard.asterisk.org/r/191/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@268894 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Add the ability to announce a call to an endpoint when there are no B
channels available. A call waiting call is a SETUP message with no B
channel selected.
Relevant specification: EN 300 056, EN 300 057, EN 300 058
For DAHDI/ISDN channels, the CHANNEL() dialplan function now supports the
"no_media_path" option.
* Returns "0" if there is a B channel associated with the call.
* Returns "1" if no B channel is associated with the call. The call is
either on hold or is a call waiting call.
If you are going to allow incoming call waiting calls then you need to use
CHANNEL(no_media_path) do determine if you must drop a call to accept the
new call.
Review: https://reviewboard.asterisk.org/r/568/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@267261 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Added ability to send and receive ETSI Explicit Call Transfer (ECT)
messages to eliminate tromboned calls.
Note: Asterisk already supported initiating the transfer of calls to
eliminate tromboned calls to libpri so there was nothing to do for the
asterisk portion.
Review: https://reviewboard.asterisk.org/r/520/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@266926 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Newer versions of libical (which we require) store the header file in a
libical/ subfolder and include an ical.h file that does a #warning for
deprecation and then #includes <libical/ical.h>. Since we now test for
libical/ical.h, we can change the #includes back to <libical/ical.h> and
remove the test which specifically adds /usr/include/libical as an include
directory.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@266386 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This uses a modified version of pabelanger's patch that checks for NTLM support
instead, which was added in 0.29.0 which is what is required for
res_calendar_ews.
(closes issue #17391)
Reported by: loloski
Patches:
issue17391.patch.v2 uploaded by pabelanger (license 224)
Tested by: twilson
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@265793 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This ensures cross-platform compatibility, even among Linux distributions,
which don't always put headers in the same place.
(closes issue #17391)
Reported by: loloski
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@265747 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r264248 | tilghman | 2010-05-19 12:41:29 -0500 (Wed, 19 May 2010) | 17 lines
Internal timing is now on by default, if you're using DAHDI 2.3 or above.
The reason for ensuring DAHDI 2.3 or above is that this version ensures that
a timer is always available, whereas in previous versions, it was possible
for DAHDI to be loaded, but have no drivers to actually generate timing. If
internal_timing was turned on in this circumstance, a complete lack of audio
would result. This is the reason why internal_timing was not on by default.
However, now that DAHDI ensures the availability of a timer, there is no
reason for this setting to be off (and in fact, it solves a great many initial
user problems).
(closes issue #15932)
Reported by: dimas
Patches:
20100519__issue15932.diff.txt uploaded by tilghman (license 14)
Tested by: tilghman
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@264249 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This will save a considerable amount of CPU on the BSDs, including Mac OS X,
as it eliminates several places in the code that we previously used a busy
loop. Additionally, this adds a res_timing interface, using kqueue timers.
Review: https://reviewboard.asterisk.org/r/543/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@262852 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Revision -r1489 of the libpri 1.4 branch corrected a deviation from Q.931
Section 5.3.2. However, this resulted in an unexpected behaviour change
to the upper layer (Asterisk).
This change uses pri_hangup_fix_enable() to follow Q.931 Section 5.3.2
call hangup better if the version of libpri supports it.
(issue #17104)
Reported by: shawkris
Tested by: rmudgett
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@262569 65c4cc65-6c06-0410-ace0-fbb531ad65f3
We nicely detect the right flags on each system for building Asterisk with
pthreads, then ignore it for every other build option that requires us to
build with pthreads. This caused some items to return a false negative.
Also cleanup some minor naming issues that caused "library library" redundancy
in the output.
(closes issue #17303)
Reported by: stuarth
Patches:
20100507__issue17303.diff.txt uploaded by tilghman (license 14)
Tested by: stuarth
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@261913 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r259748 | qwell | 2010-04-28 14:17:38 -0500 (Wed, 28 Apr 2010) | 7 lines
Remove usage of `id` since it isn't useful and was causing breakge.
Solaris `id` doesn't support the -u argument. Instead of figuring out how to
fix this to work on Solaris, I decided to check why it was necessary and where
else it was used. It was only used in one place, and it hasn't been needed
for a very long time (I question whether it was ever needed).
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@259760 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r259352 | qwell | 2010-04-27 14:29:26 -0500 (Tue, 27 Apr 2010) | 5 lines
Support the silly OSes that don't have ar and strip.
Since AC_PATH_TOOL is equiv to AC_CHECK_TOOL when path isn't specified, and
AC_PATH_TOOLS doesn't exist, we'll just switch to AC_CHECK_TOOLS.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@259353 65c4cc65-6c06-0410-ace0-fbb531ad65f3
These changes add the ability to run 'make asterisk.txt' just like the existing
'make asterisk.pdf' commands to generate a text document from the TeX files we
have in the doc/tex/ directory. I've also updated a few of the .tex files because
they weren't properly escaping certain characters so they would show up as Unicode
characters (like [U+021C]). Made changes to the configure scripts so it would
detect the catdvi program which is required to convert the .dvi file generated
by latex.
I've also added a few lines to the build_tools/prep_tarball script so that the
text documentation gets generated and added to future tarballs of Asterisk
releases.
(closes issue #17220)
Reported by: lmadsen
Patches:
asterisk.txt.patch uploaded by lmadsen (license 10)
asterisk.txt.patch-v4 uploaded by pabelanger (license 224)
Tested by: lmadsen, pabelanger
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@258351 65c4cc65-6c06-0410-ace0-fbb531ad65f3
From Reviewboard:
CCSS stands for Call Completion Supplementary Services. An admittedly out-of-date
overview of the architecture can be found in the file doc/CCSS_architecture.pdf
in the CCSS branch. Off the top of my head, the big differences between what is
implemented and what is in the document are as follows:
1. We did not end up modifying the Hangup application at all.
2. The document states that a single call completion monitor may be used across
multiple calls to the same device. This proved to not be such a good idea
when implementing protocol-specific monitors, and so we ended up using one
monitor per-device per-call.
3. There are some configuration options which were conceived after the document
was written. These are documented in the ccss.conf.sample that is on this
review request.
For some basic understanding of terminology used throughout this code, see the
ccss.tex document that is on this review.
This implements CCBS and CCNR in several flavors.
First up is a "generic" implementation, which can work over any channel technology
provided that the channel technology can accurately report device state. Call
completion is requested using the dialplan application CallCompletionRequest and can
be canceled using CallCompletionCancel. Device state subscriptions are used in order
to monitor the state of called parties.
Next, there is a SIP-specific implementation of call completion. This method uses the
methods outlined in draft-ietf-bliss-call-completion-06 to implement call completion
using SIP signaling. There are a few things to note here:
* The agent/monitor terminology used throughout Asterisk sometimes is the reverse of
what is defined in the referenced draft.
* Implementation of the draft required support for SIP PUBLISH. I attempted to write
this in a generic-enough fashion such that if someone were to want to write PUBLISH
support for other event packages, such as dialog-state or presence, most of the effort
would be in writing callbacks specific to the event package.
* A subportion of supporting PUBLISH reception was that we had to implement a PIDF
parser. The PIDF support added is a bit minimal. I first wrote a validation
routine to ensure that the PIDF document is formatted properly. The rest of the
PIDF reading is done in-line in the call-completion-specific PUBLISH-handling
code. In other words, while there is PIDF support here, it is not in any state
where it could easily be applied to other event packages as is.
Finally, there are a variety of ISDN-related call completion protocols supported. These
were written by Richard Mudgett, and as such I can't really say much about their
implementation. There are notes in the CHANGES file that indicate the ISDN protocols
over which call completion is supported.
Review: https://reviewboard.asterisk.org/r/523
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@256528 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Detect all platforms that don't like that, either, and ensure that when documentation is
missing, we pass a non-NULL pointer when outputting the corresponding documentation.
(closes issue #16689)
Reported by: bklang
Patches:
20100209__issue16689__with_tests.diff.txt uploaded by tilghman (license 14)
Review: https://reviewboard.asterisk.org/r/497/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@246030 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r242520 | tilghman | 2010-01-24 00:33:01 -0600 (Sun, 24 Jan 2010) | 8 lines
Only rebuild bison and flex source files on demand, if bison and flex are detected by the configure script.
Changed after discussion on the -dev list about possible unnecessary build
failures, due to checkouts/untars causing these special source files to
possibly be newer than their resulting C files. This should additionally
ensure that nobody need learn about extra Makefile arguments to ensure the
proper files get rebuilt when changes are made to these special source files.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@242521 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r236585 | seanbright | 2009-12-28 10:12:08 -0500 (Mon, 28 Dec 2009) | 7 lines
Try a test compile to see if PTHREAD_ONCE_INIT requires extra braces.
There was conditional code (based on build platform) to optioinally wrap
PTHREAD_ONCE_INIT in braces that was removed since it is fixed in newer versions
of Solaris/OpenSolaris, but I am still running into it on Solaris 10 x86 so add
a configure-time check for it.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@236613 65c4cc65-6c06-0410-ace0-fbb531ad65f3
* Set OSARCH to linux-gnu even if host_os is linux-gnueabi
* When checking if we are Linux, check OSARCH rather than host_os
The newer ARM ABI ("EABI") shows the OS name 'linux-gnueabi' rather than
'linux-gnu' . This patch sets OSARCH to be 'linux-gnu' even in such a case.
OSARCH is tested for the value of 'linux-gnu' in one or two places in the
tree. This patch also fixes the check libcap to check for $OSARCH rather
than $host_os .
See also: http://wiki.debian.org/ArmEabiPort
Merged revisions 225957 via svnmerge from
http://svn.digium.com/svn/asterisk/branches/1.4
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@226018 65c4cc65-6c06-0410-ace0-fbb531ad65f3
* Added handling of received HOLD/RETRIEVE messages and the optional ability
to transfer a held call on disconnect similar to an analog phone.
* Added CallRerouting/CallDeflection support for Q.SIG, ETSI PTP, ETSI PTMP.
Will reroute/deflect an outgoing call when receive the message.
Can use the DAHDISendCallreroutingFacility to send the message for the
supported switches.
* Added ability to send/receive keypad digits in the SETUP message.
Send keypad digits in SETUP message: Dial(DAHDI/g1[/K<keypad_digits>][/extension])
Access any received keypad digits in SETUP message by: ${CHANNEL(keypad_digits)}
* Added support for BRI PTMP NT mode.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@225692 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The Telecom Specs in NZ suggests that SUB ADDRESS is always on, so doing
"desk to desk" between offices each with an asterisk box over the ISDN
should then be possible, without a whole load of DDI numbers required.
(closes issue #15604)
Reported by: alecdavis
Patches:
asterisk_subaddr_trunk.diff11.txt uploaded by alecdavis (license 585)
Some minor modificatons were made.
Tested by: alecdavis, rmudgett
Review: https://reviewboard.asterisk.org/r/405/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@225357 65c4cc65-6c06-0410-ace0-fbb531ad65f3
A recent change to the configure script that allows the user to specify
CFLAGS and/or LDFLAGS to the script had the unfortunate side effect of
letting autoconf's default CFLAGS (-g -O2) feed in to the rest of the build
system, thereby overriding the DONT_OPTIMIZE setting in menuselect. That
problem is now corrected.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@217074 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Cross-compilation environments want to provide 'defaults' for compiler and
linker options, and frequently do this by specifying CFLAGS and LDFLAGS in the
environment or as command-line arguments to the configure script. This patch
modifies the configure script and Makefile to preserve these settings and
ensure they are used in the build process.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@214696 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch makes some small changes to handle watchdog timeouts in a better way,
and also uses a 'cleaner' method of including the spandsp header files.
(closes issue #14769)
Reported by: andrew
Patches:
app_fax-20090406.diff uploaded by andrew (license 240)
v1-14769.patch uploaded by dimas (license 88)
Tested by: freh, deti, caspy, dimas, sgimeno, Dovid
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@210777 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Also go back and wrap all of the places that use the specific reverse charge
APIs with preprocessor conditionals.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@204919 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Someone asked yesterday, "is there a good reason why we can't just put these
modules in Asterisk?". After a brief discussion, as long as the modules are
clearly set aside in their own directory and not enabled by default, it is
perfectly fine.
For more information about why a module goes in addons, see README-addons.txt.
chan_ooh323 does not currently compile as it is behind some trunk API updates.
However, it will not build by default, so it should be okay for now.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@204413 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The original patch for this was written by Brett Bryant, and I split it out into
it's own module.
(closes issue #12876)
Reported by: bbryant
Patches:
06162008_cdr_custom_syslog.diff uploaded by bbryant (license 36)
05212009_cdr_syslog.patch uploaded by seanbright (license 71)
Tested by: seanbright
Review: https://reviewboard.asterisk.org/r/297/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@203846 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Since we use 'static' weakref symbols, and not all GCC versions support them,
test for that combination explicitly.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@201137 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The last changes to ast_gcc_attribute.m4 caused some problems checking for
various attributes, because the scope of the symbol the attribute is applied
to can be important; this patch allows the scope to be specified for the check.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@200985 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch provides a new implementation of the optional API support defined
in asterisk/optional_api.h; this new version provides solves compatibility
issues with the use of linker version scripts for suppressing global symbols.
In addition, there is now a functional (and tested!) implementation for Mac OS/X,
so module writers no longer need to use special tests before calling optional
API functions. All future implementations must provide these same semantics,
so that module writers can rely on them.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@200519 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This commit add Calendaring support to Asterisk for iCalendar, CalDAV, and MS
Exchange calendars. Exchange support has only been tested on Exchange Server 2k3
and does not support forms-based authentication at this time (patches *very*
welcome). Exchange support is also currently missing the ability to return a
list of a meting's attendees (again, patches are very, very welcome).
Features include:
Querying a calendar for events over a specific time range
Checking a calendar's busy status via the dialplan
Writing calendar events via the dialplan (CalDAV and Exchange only)
Handling calendar event notifications through the dialplan
(closes issue #14771)
Tested by: lmadsen, twilson, Shivaprakash
Review: https://reviewboard.asterisk.org/r/58
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@197738 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Adds ability for CHANNEL() dialplan function, when used on DAHDI channels,
to temporarily change the number of buffers and/or the buffer policy, and also
to enable, disable, or switch the echo canceller between FAX/data and voice
modes.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@191411 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r189601 | dbailey | 2009-04-21 09:00:55 -0500 (Tue, 21 Apr 2009) | 3 lines
Add check in configure script to check for GLOB_NOMAGIC and GLOB_BRACE in glob.h
This allows config.c to compile when linked against uclibc that does not support these parameters
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@189629 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This is the companion commit to libpri r732. Service messages are now supported
for switch types 4ess/5ess. A new option service_message_support has been added
to chan_dahdi.conf and is noted in the sample config file. The service message
support is turned off by default. The current implementation relies on AstDB
to keep track of channel state, which allows the statuses to be preserved
across Asterisk restarts. Below is a description of the storage format.
The state and reason for the service state are in the form <state>:<reason>,
where:
<state> ::= { 'O' } // 'O' – Out Of Service
<reason> ::= { '0' | '1' | '2' | '3' }, where:
'0' – No reason (backwards compatibility)
'1' – NEAR END
'2' – FAR END
'3' – both NEAR and FAR END
The new CLI commands to handle channel service state are:
pri service disable channel <chan>
pri service enable channel <chan>
Many people contributed to the development of this functionality. Because I
entered at the very end I do not know the exact history. Special thanks to
all who moved the bug forward one way or another:
cmaj, PCadach, markster, mattf, drmac, MikeJ, serge-v, murf, kanelbullar, Seb7,
tilghman, lmadsen, and especially dhubbard (he answered lots of my questions
and did a large portion of the work)
(closes issue #3450)
Reported by: cmaj
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@188342 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r182810 | russell | 2009-03-17 21:09:13 -0500 (Tue, 17 Mar 2009) | 44 lines
Fix cases where the internal poll() was not being used when it needed to be.
We have seen a number of problems caused by poll() not working properly on
Mac OSX. If you search around, you'll find a number of references to using
select() instead of poll() to work around these issues. In Asterisk, we've
had poll.c which implements poll() using select() internally. However, we
were still getting reports of problems.
vadim investigated a bit and realized that at least on his system, even
though we were compiling in poll.o, the system poll() was still being used.
So, the primary purpose of this patch is to ensure that we're using the
internal poll() when we want it to be used.
The changes are:
1) Remove logic for when internal poll should be used from the Makefile.
Instead, put it in the configure script. The logic in the configure
script is the same as it was in the Makefile. Ideally, we would have
a functionality test for the problem, but that's not actually possible,
since we would have to be able to run an application on the _target_
system to test poll() behavior.
2) Always include poll.o in the build, but it will be empty if AST_POLL_COMPAT
is not defined.
3) Change uses of poll() throughout the source tree to ast_poll(). I feel
that it is good practice to give the API call a new name when we are
changing its behavior and not using the system version directly in all cases.
So, normally, ast_poll() is just redefined to poll(). On systems where
AST_POLL_COMPAT is defined, ast_poll() is redefined to ast_internal_poll().
4) Change poll() in main/poll.c to be ast_internal_poll().
It's worth noting that any code that still uses poll() directly will work fine
(if they worked fine before). So, for example, out of tree modules that are
using poll() will not stop working or anything. However, for modules to work
properly on Mac OSX, ast_poll() needs to be used.
(closes issue #13404)
Reported by: agalbraith
Tested by: russell, vadim
http://reviewboard.digium.com/r/198/
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@182847 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This commit introduces official support for R2 signaling in chan_dahdi. The
modifications to chan_dahdi, and the supporting library, LibOpenR2, were both
written by Moises Silva.
Many users are using this code, or a variant of it, in Asterisk 1.2, 1.4 and 1.6
in Brazil, México and Argentina. An unknown number of users (but at least 1)
are using it in each of the following countries: Colombia, Nepal, Thailand,
Venezuela, Perú, and probably others.
To use this code, LibOpenR2 must be installed from http://www.libopenr2.org/.
Information about configuration can be found in configs/chan_dahdi.conf.sample.
The code committed is the most up to date version, which was being maintained
in svn/asterisk/team/moy/mfcr2/.
I would also like to include a Thank You to the many others that tested this
code beyond those listed in this commit message. These are the names that I
could find in the mantis issue.
(closes issue #12509)
Reported by: moy
Patches:
chan_zap-mfr2.patch uploaded by moy (license 222)
Tested by: moy, korihor, viniciusfontes, Skarmeth, loloski, asbestoshead, titogarrido, heliocoelhojr, konsultex, ncorrare, ecarruda, rtorresduque, PTorres, ychen
Review: http://reviewboard.digium.com/r/40/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@182355 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Several changes in PTLib have occurred requiring build time detection. Changes
accounted for include the library name change, config option change, install
location change, and a boolean type change which is handled by ast_ptlib.h.
Also, the sed check has been modified to properly work with autoconf >= 2.62.
(closes issue #14224)
Reported by: bergolth
Patches:
asterisk-autoconf-sed.patch uploaded by bergolth (license 661)
asterisk-pwlib-v3.patch uploaded by bergolth (license 661)
Tested by: jpeeler
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@177162 65c4cc65-6c06-0410-ace0-fbb531ad65f3
2. Use curl to download sound files, as curl is installed natively on OS X,
whereas wget and fetch are not.
(closes issue #14332)
Reported by: oej
Tested by: Corydon76
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@173130 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Based on cli_permissions.conf configuration file, we are able to permit or deny
cli commands based on some patterns and the local user and group running rasterisk.
(Sorry if I missed some of the testers).
Reviewboard: http://reviewboard.digium.com/r/11/
(closes issue #11123)
Reported by: eliel
Tested by: eliel, IgorG, Laureano, otherwiseguy, mvanbaak
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@160062 65c4cc65-6c06-0410-ace0-fbb531ad65f3
------------------------------------------------------------------------
r159808 | kpfleming | 2008-11-29 10:58:29 -0600 (Sat, 29 Nov 2008) | 7 lines
update dev-mode compiler flags to match the ones used by default on Ubuntu Intrepid, so all developers will see the same warnings and errors
since this branch already had some printf format attributes, enable checking for them and tag functions that didn't have them
format attributes in a consistent way
------------------------------------------------------------------------
in addition:
move some format attributes from main/utils.c to the header files they belong in, and fix up references to the relevant functions based on new compiler warnings
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@159818 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This provides a new timing interface. In order to use it,
you must be running a Linux with a kernel version of
2.6.25 or newer and glibc 2.8 or newer.
This timing interface is a good alternative if a timing
source is necessary (e.g. for IAX trunking) but DAHDI is
otherwise unnecessary for the system.
For now, this commit contains the actual work done in the
res_timing_timerfd branch. There are no notices in the README
or CHANGES files yet, but they will be added in my next commit.
The timing API of Asterisk also needs to have a bit of work done
with regards to choosing which timing interface to use. This commit
makes the choice a build-time decision, by only allowing one of
the timer interfaces to be chosen in menuselect. It would be preferable
if the choice could be made at run-time, however. The preferred timing
interface could be loaded and tested, and if it does not work, choice
number two may be used instead. That sort of thing. That is beyond
the scope of work in this branch though.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@157820 65c4cc65-6c06-0410-ace0-fbb531ad65f3
along the way, change tags used in configure script, menuselect-deps and code for various dependencies to be consistently named
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@154151 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This commit introduces the first phase of an effort to manage documentation of the
interfaces in Asterisk in an XML format. Currently, a new format is available for
applications and dialplan functions. A good number of conversions to the new format
are also included.
For more information, see the following message to asterisk-dev:
http://lists.digium.com/pipermail/asterisk-dev/2008-October/034968.html
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@153365 65c4cc65-6c06-0410-ace0-fbb531ad65f3
both /usr/lib and /usr/lib64 since some distros
place 64-bit libraries only in the /usr/lib64
directory.
(closes issue #13721)
Reported by: jcollie
Patches:
0007-Look-in-64bit-dirs-for-openais.patch uploaded by jcollie (license 412)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@150210 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Reported by: nickpeirson
Patches:
pbx.c.patch uploaded by nickpeirson (license 579)
replace_bzero+bcopy.patch uploaded by nickpeirson (license 579)
Tested by: nickpeirson, murf
1. replaced all refs to bzero and bcopy to memset and memmove instead.
2. added a note to the CODING-GUIDELINES
3. add two macros to asterisk.h to prevent bzero, bcopy from creeping
back into the source
4. removed bzero from configure, configure.ac, autoconfig.h.in
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@147807 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This allows for the ODBC parts to work on OpenBSD as well.
99.99% of the work is done by seanbright (bow, bow) and I actually
did nothing but test and yell at him that it still didn't work :)
Thanks for helping out !
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@146925 65c4cc65-6c06-0410-ace0-fbb531ad65f3
in the base package instead of the -devel package. Now we print a notice and
disable GMime support instead of bombing during the main compilation.
(closes issue #13583)
Reported by: arkadia
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@145692 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r134649 | tilghman | 2008-07-30 16:38:50 -0500 (Wed, 30 Jul 2008) | 4 lines
Qwell pointed out, via IRC, that the previous fix only worked when explicitly
set. When nothing is set, and the option is implied, it breaks, because
configure sets the prefix to 'NONE'. Fixing.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@134650 65c4cc65-6c06-0410-ace0-fbb531ad65f3
implementations. Asterisk has, for a long time,
had its own implementation of poll(2) which
just used the input arguments to call select(2).
In 1.4, this internal implementation was used
for Darwin systems. This was removed in Asterisk
trunk at some point, but it seems as though this
was not the right move to make.
On Mac OS X, it appears as though the poll used
to gather CLI input does not respond properly
when connecting via a remote Asterisk console.
Reverting to the use of Asterisk's poll fixed
the issue.
Also, there is now an option for the configure
script, --enable-internal-poll, which will allow
for anyone to use Asterisk's internal poll
implementation in case they suspect that their
system's poll implementation is buggy.
closes issue #11928)
Reported by: adriavidal
Patches:
1.6.0-configurev2.patch uploaded by putnopvut (license 60)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@134125 65c4cc65-6c06-0410-ace0-fbb531ad65f3
own repository, and must be installed like any other library for Asterisk to
use. The two modules that require it are codec_resample and app_jack.
To install libresample:
$ svn co http://svn.digium.com/svn/libresample/trunk libresample
$ cd libresample
$ ./configure
$ make
$ sudo make install
This code is currently in our own repository because the build system did not
include the appropriate targets for building a dynamic library or for installing
the library.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@132390 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r130039 | kpfleming | 2008-07-11 10:41:56 -0500 (Fri, 11 Jul 2008) | 4 lines
add support for a configuration parameter for 'inband audio during RELEASE', which is currently mandatory in libpri-1.4.4 but will become configurable in libpri-1.4.5 later today
(related to issue #13042)
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@130040 65c4cc65-6c06-0410-ace0-fbb531ad65f3
remove weird pre-setting of LUA paths; they are not necessary; also use the proper path for including the files in pbx_lua.c
add searching for OpenAIS libraries in /usr/lib/openais if a path is not specified; not sure if this is really the optimal solution, but it works
make the compiler shut up about some ignored function results in pbx_gtkconsole; this module is badly coded anyway
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@126356 65c4cc65-6c06-0410-ace0-fbb531ad65f3
implementation from using the volatile libtds, to using the db-lib front end.
The unintended side effect of this is that we support (at least) versions 0.62
through 0.82 of the FreeTDS distribution without any #ifdef ugliness.
(closes issue #12844)
Reported by: jcollie
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@126226 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r125132 | kpfleming | 2008-06-25 17:21:30 -0500 (Wed, 25 Jun 2008) | 10 lines
allow tonezone to live in a different place than DAHDI/Zaptel, since dahdi-tools and dahdi-linux are now separate packages and can be installed in different places
don't include tonezone.h in dahdi_compat.h, because only a couple of modules need it
get app_rpt building again after the DAHDI changes
(closes issue #12911)
Reported by: tzafrir
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@125138 65c4cc65-6c06-0410-ace0-fbb531ad65f3
the checks for the CLM and EVT services from the SAForum AIS. I'm going to work
on merging in changes from this branch in pieces.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@121403 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r114695 | seanbright | 2008-04-26 21:26:15 -0400 (Sat, 26 Apr 2008) | 5 lines
When we don't explicitly pass a path to the --with-tds configure option, we
may end up finding tds.h in /usr/local/include instead of /usr/include. If
this happens, the grep that looks for the version (from tdsver.h) will fail
and we'll have some problems during the build.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@114696 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This does introduce a dependency on the GMime library for handling HTTP POSTs, but it is available in most distros.
If the library is present, then the compile flag for ENABLE_UPLOADS is enabled by default in menuselect.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@109229 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r103722 | mmichelson | 2008-02-15 11:26:37 -0600 (Fri, 15 Feb 2008) | 8 lines
Final round of changes for configure script logic for IMAP
Now if a directory is specified, then we will search that directory for
a source installation of the IMAP toolkit. If none is found, then we will
use that directory as the basis for detecting a package installation of
the IMAP c-client. If that check fails, then configure will fail.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@103725 65c4cc65-6c06-0410-ace0-fbb531ad65f3
there. The difference is that trunk already had the --with-imap=system option, but it only
checked the include path for headers in the imap directory and not also the c-client directory.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@103700 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Also removes second check for awk, which causes Solaris to find an incompatible version of awk.
(closes issue #11829)
Reported by: snuffy
Patches:
bug-11829.diff uploaded by snuffy (license 35)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@103694 65c4cc65-6c06-0410-ace0-fbb531ad65f3
run "make asterisk.pdf" when not all of the right packages are installed.
(closes issue #10763)
Reported by: Corydon76
Patches:
20070919__bug10763.diff.txt uploaded by Corydon76 (license 14)
Tested by: Corydon76
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@98454 65c4cc65-6c06-0410-ace0-fbb531ad65f3
implementation to fix a small bug, but after a discussion with rizzo, I went to
change it back. Also, it turns out that the implementation of the macro already
supported what was needed to fix the problem.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@97767 65c4cc65-6c06-0410-ace0-fbb531ad65f3
finish implementation of check for Zaptel HWGAIN support
add check for Zaptel ECHOCANCEL_PARAMS support
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@95937 65c4cc65-6c06-0410-ace0-fbb531ad65f3
iconv dependency for func_iconv.
This fixes some build issues on CYGWIN and FreeBSD and probably
other platforms where libiconv is not there by default
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@95624 65c4cc65-6c06-0410-ace0-fbb531ad65f3
NETSMP and GTK (GTK is not used thoug).
AST_EXT_TOOL_CHECK() could be used for checking curl status
as well, perhaps with a small addition because we currently seem
to require a curl version greater than X.Y.Z
Add a NETSMP_INCLUDE entry in makeopts.in
We don't have yet any macros for using pkg-config to check
for a specific package (right now there is only gtk2+
in the category).
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@93898 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r93180 | kpfleming | 2007-12-16 22:44:51 -0800 (Sun, 16 Dec 2007) | 23 lines
In http://lists.digium.com/pipermail/asterisk-dev/2007-December/031145.html,
rizzo brought up some issues related to the way that the metadata required
for menuselect and the rest of the build system is extracted from the source
files. Since I had a few hours to kill on an airplane today, I decided to
improve this situation... so now the system caches the extracted metadata
and uses it to build the menuselect 'tree' as much as it can. The result
of this is that when a single source file is changed, only the metadata for
that file needs to be extracted again, and the rest is used from the cache
files. I also reduced the number of forked processes required to do the
metadata extraction; it was actually possible to do most of what we needed
in the Makefiles themselves without using any shell scripts at all! On my
laptop, these changes resulted in an 80% decrease in the time required
for the 'menuselect.makeopts' automatic check to occur after editing a single
source file.
While doing this work I also cleaned up a few minor things in the Makefiles,
adding a check for 'awk' to the configure script and changed all remaining
places we use 'grep' or 'awk' to use the ones found by the configure script,
and changed the 'prep_tarball' script to build the menuselect metadata so
that tarballs of Asterisk will include it and won't require the user to
wait while it is extracted after unpacking.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@93184 65c4cc65-6c06-0410-ace0-fbb531ad65f3
structures missing. Patched configure to check for this stuff and
put a #ifdef around the offending code in chan_zap. Thanks to file
for overseeing this.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@92422 65c4cc65-6c06-0410-ace0-fbb531ad65f3
include/asterisk/autoconfig.h. Also, move the conditional include of sys/poll.h
or asterisk/poll-compat.h into asterisk/config.h instead of the two headers it
existed in before.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@89361 65c4cc65-6c06-0410-ace0-fbb531ad65f3
and the like (this could be used for gtk and gtk2 as well)
Other files: add tests for sdl, sdl_image and avcodec and regenerate
configure and autoconfig.h.in
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@89351 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
(closes issue #10133)
................
r74374 | qwell | 2007-07-10 13:39:30 -0500 (Tue, 10 Jul 2007) | 13 lines
Merged revisions 74373 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.2
........
r74373 | qwell | 2007-07-10 13:37:23 -0500 (Tue, 10 Jul 2007) | 5 lines
Use res_ndestroy on systems that have it. Otherwise, use res_nclose.
This prevents a memleak on NetBSD - and possibly others.
Issue 10133, patch by me, reported and tested by scw
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@74375 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r74211 | russell | 2007-07-09 16:31:30 -0500 (Mon, 09 Jul 2007) | 5 lines
Update the configure script to check for a required function that is not present
in the 1.2 version of libpri. This will prevent the configure script from thinking
that it has compatible libpri support for Asterisk 1.4, when it actually does not
because the installed version is from 1.2.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@74212 65c4cc65-6c06-0410-ace0-fbb531ad65f3
*must* write the file to the FILE *, and not the raw fd. Otherwise, it breaks
TLS support.
Thanks to rizzo for catching this!
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@72738 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Handle transferring large files from the built-in http server. Previously, the
code attempted to malloc a block as large as the file itself. Now it uses the
sendfile() system call so that the file isn't copied into userspace at all if
it is available. Otherwise, it just uses a read/write of small chunks at a time.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@72701 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This checks for it in configure, and only uses it if it's available.
If it's wrong, somebody please yell at me and tell me why.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@72539 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r69702 | russell | 2007-06-18 11:35:02 -0500 (Mon, 18 Jun 2007) | 6 lines
To prevent 92138749238754 more reports of "I have unixodbc installed, but
still can't build *_odbc.so!", check for ltdl directly, instead of just listing
it as another library to include in the unixodbc check in the configure script.
This also makes ltdl show up as a dependency in menuselect so people know what
to go install. (related to issue #9989, patch by me)
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@69703 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r67026 | russell | 2007-06-04 11:02:31 -0500 (Mon, 04 Jun 2007) | 6 lines
Change the configure script to build a test program against libcurl to make
sure the results from curl-config can be used to compile successfully. This is
intended to help prevent a situation where you are cross compiling, and the
configure script finds the curl library installed on the host.
(issue #9865, reported and patched by zandbelt)
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@67029 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r66029 | qwell | 2007-05-24 15:53:18 -0500 (Thu, 24 May 2007) | 2 lines
Following moving strip to AC_PATH_TOOL, we need to do something similar for ar.
........
r66030 | qwell | 2007-05-24 15:54:16 -0500 (Thu, 24 May 2007) | 2 lines
Rebuild configure script for previous ar fix.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@66031 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r60603 | russell | 2007-04-06 15:58:43 -0500 (Fri, 06 Apr 2007) | 13 lines
To be able to achieve the things that we would like to achieve with the
Asterisk GUI project, we need a fully functional HTTP interface with access
to the Asterisk manager interface. One of the things that was intended to be
a part of this system, but was never actually implemented, was the ability for
the GUI to be able to upload files to Asterisk. So, this commit adds this in
the most minimally invasive way that we could come up with.
A lot of work on minimime was done by Steve Murphy. He fixed a lot of bugs in
the parser, and updated it to be thread-safe. The ability to check
permissions of active manager sessions was added by Dwayne Hubbard. Then,
hacking this all together and do doing the modifications necessary to the HTTP
interface was done by me.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@60604 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r59202 | nadi | 2007-03-26 17:25:53 +0200 (Mo, 26 Mär 2007) | 4 lines
* mISDN >= 1.2 provides a dsp pipeline for i.e. echo cancellation modules, make chan_misdn use it.
* add a check for linux/mISDNdsp.h to configure.ac and update the autogenerated files: 'configure', 'autoconfig.h.in'
(the 'configure' script was not in sync with the latest configure.ac, so the diff is a bit bigger than expected).
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@59203 65c4cc65-6c06-0410-ace0-fbb531ad65f3