When a stasis channel is stolen by another app, the control
structure is unreffed but never unlinked from the app_controls
container. This causes the channel reference to leak.
Added OBJ_UNLINK to the callback in channel_stolen_cb.
Also added some additional channel lifecycle debug messages to
channel.c.
ASTERISK-27059 #close
Repoorted-by: George Joseph
Change-Id: Ib820936cd49453f20156971785e7f4f182c56e14
The ast_channel_suppress function wrongly decremented the
reference count of the underlying structure used to keep
track of what should be suppressed on a channel if the
function was called multiple times on the same channel.
This change cleans up the reference counting a bit so
this no longer occurs.
ASTERISK-27016
Change-Id: I2eed4077cb4916e6626f9f120b63b963acc5c136
ASTERISK-26419 introduced a bug when calling ast_audiohook_write_list in
ast_write. It would free the frame given to ast_write if the frame returned
by ast_audiohook_write_list was different than the given one. The frame give
to ast_write should never be freed within that function. It is the caller's
resposibility to free the frame after writing (or when it its done with it).
By freeing it within ast_write this of course led to some memory corruption
problems.
This patch makes it so the frame given to ast_write is no longer freed within
the function. The frame returned by ast_audiohook_write_list is now subsequently
used in ast_write and is freed later. It is freed either after translate if the
frame returned by translate is different, or near the end of ast_write prior to
function exit.
ASTERISK-26973 #close
Change-Id: Ic9085ba5f555eeed12f6e565a638c3649695988b
When manipulating flags on a channel the channel has to be
locked to guarantee that nothing else is also manipulating
the flags. This change introduces locking where necessary to
guarantee this. It also adds helper functions that manipulate
channel flags and lock to reduce repeated code.
ASTERISK-26789
Change-Id: I489280662dba0f4c50981bfc5b5a7073fef2db10
When using the Bridge AMI action on the same channel multiple times
it was possible for the channel to return to the wrong location in
the dialplan if the other party hung up. This happened because the
priority of the channel was not preserved across each action
invocation and it would fail to move on to the next priority in
other cases.
This change makes it so that the priority of a channel is preserved
when taking control of it from another thread and it is incremented
as appropriate such that the priority reflects where the channel
should next be executed in the dialplan, not where it may or may not
currently be.
The Bridge AMI action was also changed to ensure that it too
starts the channels at the next location in the dialplan.
ASTERISK-24529
Change-Id: I52406669cf64208aef7252a65b63ade31fbf7a5a
This patch is the first cut at adding stream support to the bridging framework.
Changes were made to the framework that allows mapping of stream topologies to
a bridge's supported media types.
The first channel to enter a bridge initially defines the media types for a
bridge (i.e. a one to one mapping is created between the bridge and the first
channel). Subsequently added channels merge their media types into the bridge's
adding to it when necessary. This allows channels with different sized
topologies to map correctly to each other according to media type. The bridge
drops any frame that does not have a matching index into a given write stream.
For now though, bridge_simple will align its two channels according to size or
first to join. Once both channels join the bridge the one with the most streams
will indicate to the other channel to update its streams to be the same as that
of the other. If both channels have the same number of streams then the first
channel to join is chosen as the stream base.
A topology change source was also added to a channel when a stream toplogy
change request is made. This allows subsystems to know whether or not they
initiated a change request. Thus avoiding potential recursive situations.
ASTERISK-26966 #close
Change-Id: I1eb5987921dd80c3cdcf52accc136393ca2d4163
This change extends the ast_request functionality by adding another
function and callback to create an outgoing channel with a requested
stream topology. Fallback is provided by either converting the
requested stream topology into a format capabilities structure if
the channel driver does not support streams or by converting the
requested format capabilities into a stream topology if the channel
driver does support streams.
The Dial application has also been updated to request an outgoing
channel with the stream topology of the calling channel.
ASTERISK-26959
Change-Id: Ifa9037a672ac21d42dd7125aa09816dc879a70e6
This change removes the old epoll support which has not been used or
maintained in quite some time.
The fixed number of file descriptors on a channel has also been removed.
File descriptors are now contained in a growable vector. This can be
used like before by specifying a specific position to store a file
descriptor at or using a new API call, ast_channel_fd_add, which adds
a file descriptor to the channel and returns its position.
Tests have been added which cover the growing behavior of the vector
and the new API call.
ASTERISK-26885
Change-Id: I1a754b506c009b83dfdeeb08c2d2815db30ef928
This change adds a few things to facilitate stream topology changing:
1. Control frame types have been added for use by the channel driver
to notify the application that the channel wants to change the stream
topology or that a stream topology change has been accepted. They are
also used by the indicate interface to the channel that the application
uses to indicate it wants to do the same.
2. Legacy behavior has been adopted in ast_read() such that if a
channel requests a stream topology change it is denied automatically
and the current stream topology is preserved if the application is
not capable of handling streams.
Tests have also been written which confirm the multistream and
non-multistream behavior.
ASTERISK-26839
Change-Id: Ia68ef22bca8e8457265ca4f0f9de600cbcc10bc9
* Removed the AST_CHAN_TP_MULTISTREAM tech property. We now rely
on read_stream being set to indicate a multi stream channel.
* Added ast_channel_is_multistream convenience function.
* Fixed issue where stream and default_stream weren't being set on
a frame retrieved from the queue.
* Now testing for NULL being returned from the driver's read or
read_stream callback.
* Fixed issue where the dropnondefault code was crashing on a
NULL f.
* Now enforcing that if either read_stream or write_stream are
set when ast_channel_tech_set is called that BOTH are set.
* Added the unit tests.
ASTERISK-26816
Change-Id: If7792b20d782e71e823dabd3124572cf0a4caab2
This change introduces an ast_read_stream function and callback in
the channel technology which allows reading frames from all streams
and not just the default streams.
The stream number has also been added to frames. This is to allow the
case where frames are queued onto the channel instead of being read
directly from the driver.
This change does impose a restriction on reading though: a chain of
frames can only contain frames from the same stream.
ASTERISK-26816
Change-Id: I5d7dc35e86694df91fd025126f6cfe0453aa38ce
This change adds an ast_write_stream function which allows
writing a frame to a specific media stream. It also moves
ast_write() to using this underneath by writing media
frames provided to it to the default streams of the channel.
Existing functionality (such as audiohooks, framehooks, etc)
are limited to being applied to the default stream only.
Unit tests have also been added which test the behavior of
both non-multistream and multistream channels to confirm that
the write() and write_stream() callbacks are invoked
appropriately.
ASTERISK-26793
Change-Id: I4df20d1b65bd4d787fce0b4b478e19d2dfea245c
The ast_waitfor_nandfds operation will manipulate the flags
of channels passed in. This was previously done without
the channel lock being held. This could result in incorrect
values existing for the flags if another thread manipulated
the flags at the same time.
This change locks the channel during flag manipulation.
ASTERISK-26788
Change-Id: I2c5c8edec17c9bdad4a93291576838cb552ca5ed
We shouldn't unlock the channel after starting a snapshot staging because
another thread may interfere and do its own snapshot staging.
* app_dial.c:dial_exec_full() made hold the channel lock while setting up
the outgoing channel staging. Made hold the channel lock after the called
party answers while updating the caller channel staging.
* chan_sip.c:sip_new() completed the channel staging on off-nominal exit.
Also we need to use ast_hangup() instead of ast_channel_unref() at that
location.
* channel.c:__ast_channel_alloc_ap() added a comment about not needing to
complete the channel snapshot staging on off-nominal exit paths.
* rtp_engine.c:ast_rtp_instance_set_stats_vars() made hold the channel
locks while staging the channels for the stats channel variables.
Change-Id: Iefb6336893163f6447bad65568722ad5d5d8212a
Using the timerfd timing module can cause channel freezing, lingering, or
deadlock issues. The problem is because this is the only timing module
that uses an associated alert-pipe. When the alert-pipe becomes
unbalanced with respect to the number of frames in the read queue bad
things can happen. If the alert-pipe has fewer alerts queued than the
read queue then nothing might wake up the thread to handle received frames
from the channel driver. For local channels this is the only way to wake
up the thread to handle received frames. Being unbalanced in the other
direction is less of an issue as it will cause unnecessary reads into the
channel driver.
ASTERISK-26716 is an example of this deadlock which was indirectly fixed
by the change that found the need for this patch.
* In channel.c:__ast_queue_frame(): Adding frame lists to the read queue
did not add the same number of alerts to the alert-pipe. Correspondingly,
when there is an exceptionally long queue event, any removed frames did
not also remove the corresponding number of alerts from the alert-pipe.
ASTERISK-26632 #close
Change-Id: Ia98137c5bf6e9d6d202ce0eb36441851875863f6
A dialplan intercept routine is equivalent to an interrupt routine. As
such, the routine must be done quickly and you do not have access to the
media stream. These restrictions are necessary because the media stream
is the responsibility of some other code and interfering with or delaying
that processing is bad. A possible future dialplan processing
architecture change may allow the interception routine to run in a
different thread from the main thread handling the media and remove the
execution time restriction.
* Made res_agi.c:run_agi() running an AGI in an interception routine run
in DeadAGI mode. No touchy channel frames.
ASTERISK-25951
ASTERISK-26343
ASTERISK-26716
Change-Id: I638f147ca7a7f2590d7194a8ef4090eb191e4e43
There are several issues with deferring frames that are caused by the
refactoring.
1) The code deferring frames mishandles adding a deferred frame to the
deferred queue. As a result the deferred queue can only be one frame
long.
2) Deferrable frames can come directly from the channel driver as well as
the read queue. These frames need to be added to the deferred queue.
3) Whoever is deferring frames is really only doing the __ast_read() to
collect deferred frames and doesn't care about the returned frames except
to detect a hangup event. When frame deferral is completed we must make
the normal frame processing see the hangup as a frame anyway. As such,
there is no need to have varying hangup frame deferral methods. We also
need to be aware of the AST_SOFTHANGUP_ASYNCGOTO hangup that isn't real.
That fake hangup is to cause the PBX thread to break out of loops to go
execute a new dialplan location.
4) To properly deal with deferrable frames from the channel driver as
pointed out by (2) above, means that it is possible to process a dialplan
interception routine while frames are deferred because of the
AST_CONTROL_READ_ACTION control frame. Deferring frames is not
implemented as a re-entrant operation so you could have the unsupported
case of two sections of code thinking they have control of the media
stream.
A worse problem is because of the bad implementation of the AMI PlayDTMF
action. It can cause two threads to be deferring frames on the same
channel at the same time. (ASTERISK_25940)
* Rather than fix all these problems simply revert the API refactoring as
there is going to be only autoservice and safe_sleep deferring frames
anyway.
ASTERISK-26343
ASTERISK-26716 #close
Change-Id: I45069c779aa3a35b6c863f65245a6df2c7865496
* channel.c:ast_sendtext(): Fix T.140 SendText memory leak.
* format_compatibility.c: T.140 RED and T.140 were swapped.
* res_rtp_asterisk.c:rtp_red_init(): Fix ast_format_t140_red ref leak.
* res_rtp_asterisk.c:rtp_red_init(): Fix data race after starting periodic
scheduled red_write().
* res_rtp_asterisk.c: Some other minor misc tweaks.
Change-Id: Ifa27a2e0f8a966b1cf628607c86fc4374b0b88cb
This change adds experimental support for providing RTCP
feedback information to codec modules so they can dynamically
change themselves based on conditions.
ASTERISK-26584
Change-Id: Ifd6aa77fb4a7ff546c6025900fc2baf332c31857
It was possible for a frame to be re-inserted into a jitter buffer after it
had been removed from it. A case when this happened was if a frame was read
out of the jitterbuffer, passed to the translation core, and then multiple
frames were returned from said translation core. Upon multiple frames being
returned the first is passed on, but sebsequently "chained" frames are put
back into the read queue. Thus it was possible for a frame to go back into
the jitter buffer where this would cause problems.
This patch adds a flag to frames that are inserted into the channel's read
queue after translation. The abstract jitter buffer code then checks for this
flag and ignores any frames marked as such.
Change-Id: I276c44edc9dcff61e606242f71274265c7779587
The recent change that made frame deferral into an API had a behavior
change to it. When frame deferral was completed, we would take all of
the deferred frames and queue them all onto the channel in one call to
ast_queue_frame_head(). Before frame deferral was API-ized, places that
performed manual frame deferral would actually take each deferred frame
and queue them onto the channel.
This change in behavior caused the confbridge_recording test to start
failing consistently. Without going too crazily deep into the details,
a channel was getting "stuck" in an ast_safe_sleep(). An AMI redirect
was attempting to break it out of the sleep, but because there were more
frames in the channel read queue than expected, the channel ended up
being unable to break from its sleep loop.
By restoring the behavior of individual frame queuing after deferral,
the test starts passing again.
Note, this points to a potential underlying issue pointing to an
"unbalance" that can occur when queuing multiple frames at once,
and so a follow-up issue is being created to investigate that
possibility.
Change-Id: Ied5dacacda06d343dea751ed5814a03364fe5a7d
The sending codec is switched to the receiving codec and then
is switched back to the best native codec on EVERY receiving RTP packets.
This is because after call of ast_channel_set_rawwriteformat there is call
of ast_set_write_format which calls set_format which sets rawwriteformat
to the best native format.
This patch adds a new function ast_set_write_format_path which set
specific write path on channel and uses this function to switch
the sending codec.
ASTERISK-26603 #close
Change-Id: I5b7d098f8b254ce8f45546e6c36e5d324737f71d
This works the same as for AMI manager variables. Set
"channelvars=foo,bar" in your ari.conf general section, and then the
channel variables "foo" and "bar" (along with their values), will
appear in every Stasis websocket channel event.
ASTERISK-26492 #close
patches:
ari_vars.diff submitted by Mark Michelson
Change-Id: I5609ba239259577c0948645df776d7f3bc864229
There are several places in Asterisk that have duplicated logic
for deferring important frames until later.
This commit adds a couple of API calls to facilitate this automatically.
ast_channel_start_defer_frames(): Future reads of deferrable frames on
this channel will be deferred until later.
ast_channel_stop_defer_frames(): Any frames that have been deferred get
requeued onto the channel.
ASTERISK-26343
Change-Id: I3e1b87bc6796f222442fa6f7d1b6a4706fb33641
ASTERISK_REGISTER_FILE no longer has any purpose so this commit removes
all traces of it.
Previously exported symbols removed:
* __ast_register_file
* __ast_unregister_file
* ast_complete_source_filename
This also removes the mtx_prof static variable that was declared when
MTX_PROFILE was enabled. This variable was only used in lock.c so it
is now initialized in that file only.
ASTERISK-26480 #close
Change-Id: I1074af07d71f9e159c48ef36631aa432c86f9966
ARI and AMI allow for an explicit channel ID to be specified
when originating channels. Unfortunately, there is nothing in
place to prevent someone from using the same ID for multiple
channels. Further complicating things, adding ID validation to channel
allocation makes it impossible for ARI to discern why channel allocation
failed, resulting in a vague error code being returned.
The fix for this is to institute a new method for channel errors to be
discerned. The method mirrors errno, in that when an error occurs, the
caller can consult the channel errno value to determine what the error
was. This initial iteration of the feature only introduces "unknown" and
"channel ID exists" errors. However, it's possible to add more errors as
needed.
ARI uses this feature to determine why channel allocation failed and can
return a 409 error during origination to show that a channel with the
given ID already exists.
ASTERISK-26421
Change-Id: Ibba7ae68842dab6df0c2e9c45559208bc89d3d06
The main frame read and write handlers in main/channel.c don't use the
optimum placement in the processing flow for calling audiohooks
callbacks, as far as codec translation is concerned. This change places
the audiohooks callback code:
* After the channel read translation if the frame is not linear before
the translation, thereby increasing the chance that the frame is linear
as required by audiohooks
* Before the channel write translation if the frame is linear at this
point
This prevents the audiohooks code from instantiating additional
translation paths to/from linear where a linear frame format is already
available, saving valuable CPU cycles
ASTERISK-26419
Change-Id: I6edd5771f0740e758e7eb42558b953f046c01f8f
Asterisk only supports mono audio at the moment.
This patch adds interleaved two-channel audio to Asterisk's channels.
ASTERISK-26292
Change-Id: I7a547cea0fd3c6d1e502709d9e7e39605035757a
In your Diaplan, if you specify
same => n,Set(CHANNEL(secure_bridge_media)=1)
same => n,Set(CHANNEL(secure_bridge_signaling)=1)
only the SIP channel driver chan_sip supports this. All other channels drivers
like res_pjsip fail. In case of failure, the original sRTP source code released
the whole channel, even if not hung-up, yet. This change does not release the
channel but instead hangs-up the channel.
ASTERISK-26306
Change-Id: I0489f0cb660fab6673b0db8af027d116e70a66db
This ensures startup is canceled due to allocation failures from the
following initializations.
* channel.c: ast_channels_init
* config_options.c: aco_init
ASTERISK-26265 #close
Change-Id: I911ed08fa2a3be35de55903e0225957bcdbe9611
The new endpoint option allows the PJSIP channel driver's fax_detect
endpoint option to timeout on a call after the specified number of
seconds into a call. The new feature is disabled if the timeout is set
to zero. The option is disabled by default.
ASTERISK-26214
Reported by: Richard Mudgett
Change-Id: Id5a87375fb2c4f9dc1d4b44c78ec8735ba65453d
Added a new channel variable FORWARDERNAME which indicates which
channel was responsible for a forwarding requests received on dial attempt.
Fixed a bug in the app_queue: FORWARD_CONTEXT is not used.
ASTERISK-26059 #close
Change-Id: I34e93e8c1b5e17776a77b319703c48c8ca48e7b2
The channel is now going to get T.38 terminated when it leaves the
bridging system and the bridged peers are going to get T.38 terminated as
well.
ASTERISK-25582
Change-Id: I77a9205979910210e3068e1ddff400dbf35c4ca7
