This is a semi-regression caused by the iostreams change. Prior to
iostreams, HTTP headers were written to a FILE handle using fprintf.
Then the body was written using a call to fwrite(). Because of internal
buffering, the result was that the HTTP headers and body would be sent
out in a single write to the socket.
With the change to iostreams, the HTTP headers are written using
ast_iostream_printf(), which under the hood calls write(). The HTTP body
calls ast_iostream_write(), which also calls write() under the hood.
This results in two separate writes to the socket.
Most HTTP client libraries out there will handle this change just fine.
However, a few of our testsuite tests started failing because of the
change. As a result, in order to reduce frustration for users, this
change alters the HTTP code to write the headers and body in a single
write operation.
ASTERISK-26629 #close
Reported by Joshua Colp
Change-Id: Idc2d2fb3d9b3db14b8631a1e302244fa18b0e518
ast_iostream_printf() attempts first to use a fixed-size buffer to
perform its printf-like operation. If the fixed-size buffer is too
small, then a heap allocation is used instead. The heap allocation in
this case was exactly the length of the string to print. The issue here
is that the ensuing call to vsnprintf() will print a NULL byte in the
final space of the string. This meant that the final character was being
chopped off the string and replaced with a NULL byte. For HTTP in
particular, this caused problems because HTTP publishes the expected
Contact-Length. This meant HTTP was publishing a length one character
larger than what was actually present in the message.
This patch corrects the issue by adding one to the allocation length.
ASTERISK-26629
Reported by Joshua Colp
Change-Id: Ib3c5f41e96833d0415cf000656ac368168add639
Added back in a -g3, and an -O3 when DONT_OPTIMIZE is not set, to
the CFLAGS. Not sure how they went missing.
Also fixed an uninstall problem where we weren't removing the
symlink from libasteriskpj.so.2 to libasteriskpj.so. While I was
there, I fixed it for libasteriskssl as well.
Change-Id: I9e00873b1e9082d05b5549d974534b48a2142556
OpenSSL 1.1.0 includes some major changes in the interface. See
https://wiki.openssl.org/index.php/1.1_API_Changes .
Status: Right now there are still a few deprecation notes with OpenSSL
1.1.0. But it's a start.
Changes:
* CRYPTO_LOCK is no longer available. Replace it with its value for now.
I don't completely understand what it is used for there.
* Remove several functions from libasteriskssl that seem to no longer be
needed.
* Structures have become opaque and are accesses with accessors.
* ERR_remove_thread_state() no longer needed.
* SSLv2 code now could no longer be used in 1.1.
ASTERISK-26109 #close
Change-Id: I5e29d477d486ca29b6aae0dc2f5dff960c1cb82b
The latest Release candidate fails to create RTP streams when IPv6
is not available. Due to the changes made in September the ast_sockaddr
structure passed around to create these streams is always of AF_INET6
type, causing failure when used for IPv4. This patch adds a utility
function to check for availability of IPv6 and applies such check
at startup to determine how to create the ast_sockaddr structures.
ASTERISK-26617 #close
Change-Id: I627a4e91795e821111e1cda523f083a40d0e0c3e
Use of the new logging is as simple as issuing the new CLI command or
setting the new pjproject.conf option.
Other options that can affect the logging are how you have the pjproject
log levels mapped to Asterisk log types in pjproject.conf and if you have
configured Asterisk to log the DEBUG type messages. Altering the
pjproject.conf level mapping shouldn't be necessary for most installations
as the default mapping is sensible. Configuring Asterisk to log the DEBUG
message type is standard practice for collecting debug information.
* Added CLI "pjproject set log level" command to dynamically adjust the
maximum pjproject log message level.
* Added CLI "pjproject show log level" command to see the currently set
maximum pjproject log message level.
* Added pjproject.conf startup section "log_level" option to set the
initial maximum pjproject log message level so all messages could be
captured from initialization.
* Set PJ_LOG_MAX_LEVEL to 6 to compile in all defined logging levels into
bundled pjproject. Pjproject will use the currently set run time log
level to determine if a log message is generated just like Asterisk
verbose and debug logging levels.
* In log_forwarder(), made always log enabled and mapped pjproject log
messages. DEBUG mapped log messages are no longer gated by the current
Asterisk debug logging level.
* Removed RAII_VAR() from res_pjproject.c:get_log_level().
ASTERISK-26630 #close
Change-Id: I6dca12979f482ffb0450aaf58db0fe0f6d2e5389
The recent change that made frame deferral into an API had a behavior
change to it. When frame deferral was completed, we would take all of
the deferred frames and queue them all onto the channel in one call to
ast_queue_frame_head(). Before frame deferral was API-ized, places that
performed manual frame deferral would actually take each deferred frame
and queue them onto the channel.
This change in behavior caused the confbridge_recording test to start
failing consistently. Without going too crazily deep into the details,
a channel was getting "stuck" in an ast_safe_sleep(). An AMI redirect
was attempting to break it out of the sleep, but because there were more
frames in the channel read queue than expected, the channel ended up
being unable to break from its sleep loop.
By restoring the behavior of individual frame queuing after deferral,
the test starts passing again.
Note, this points to a potential underlying issue pointing to an
"unbalance" that can occur when queuing multiple frames at once,
and so a follow-up issue is being created to investigate that
possibility.
Change-Id: Ied5dacacda06d343dea751ed5814a03364fe5a7d
The sending codec is switched to the receiving codec and then
is switched back to the best native codec on EVERY receiving RTP packets.
This is because after call of ast_channel_set_rawwriteformat there is call
of ast_set_write_format which calls set_format which sets rawwriteformat
to the best native format.
This patch adds a new function ast_set_write_format_path which set
specific write path on channel and uses this function to switch
the sending codec.
ASTERISK-26603 #close
Change-Id: I5b7d098f8b254ce8f45546e6c36e5d324737f71d
Issue/patch ASTERISK-26587 was inspired by issue ASTERISK-22992
that requested ability to add callerid into app_originate.
Comments in that issue suggested that it was better solved by
adding an option to gosub prior to originating the call. The
attached patch implements this much like app_dial with two
options one to gosub on the originating channel and one to gosub
on the newly created channel and behaves just like app_dial.
I have tested this patch by adding callerid info to the new
channel and also SIPAddHeader (to e.g. add header to force auto
answer) and confirmed it works. Have also tested both 'exten'
and 'app' versions of app_originate.
Opened by: dkerr
Patch by: dkerr
Change-Id: I36abc39b58567ffcab4a636ea196ef48be234c57
The asterisk.h header file needs to be included first or else
some things go awry, such as:
implicit declaration of function 'vasprintf'
Change-Id: I981dc2a77a1ba791888e4f1726644d4656c0407c
If a TCP/TLS connection was pending (not accepted and not timed out) during
unload of chan_sip, Asterisk would segfault when trying to send a signal to
a thread whose thread ID hadn't been recorded yet. This commit fixes that by
recording the thread ID before calling the blocking connect() syscall.
This was a regression introduced by 776a14386a.
The above wasn't enough to fix the segfault, which was now delayed to the
point where connect() timed out. Therefore, it was necessary to also remove
the SA_RESTART flag from the SIGURG sigaction so that pthread_kill() could be
used to interruput the connect() syscall.
This was a regression introduced by 5d313f51b9.
ASTERISK-26586 #close
Change-Id: I76fd9d47d56e4264e2629bce8ec15fecba673e7b
When retrieving RTCP stats for PJSIP channels, RTT values are unreliable.
RTT calculation is correct, but the data representation isn't. RTT is
represented by a 32-bit fixed-point number with the integer part in the
first 16 bits and the fractional part in the last 16 bits. In order to
get the RTT value, the fractional part is miscalculated, there is an
unnecessary 16 bit shift that causes overflow. Besides this there is
another mistake, when transforming the integer value to the fixed point
fractional part via bitwise operation, that loses precision.
* RTT fractional part is no longer shifted, avoiding overflow.
* RTT fractional part is transformed to its fixed-point value more
precisely.
* Fixed timeval2ntp() and ntp2timeval() second fraction conversions.
* Fixed NTP timestamp report logging. The usec was inexplicably
multiplied by 4096.
ASTERISK-26566 #close
Reported by Hector Royo Concepcion
Change-Id: Ie09bdabfee75afb3f1b8ddfd963e5219ada3b96f
Previously, a TLS server socket would only be restarted upon sip reload if the
bind address had changed. This commit adds checking for changes to TLS
parameters like certificate, ciphers, etc. so they get picked up without
requiring a reload of the entire chan_sip module. This does not affect open
connections in any way, but new connections will use the new TLS parameters.
The changes also apply to HTTP and Manager.
ASTERISK-26604 #close
Change-Id: I169e86cefc6dcd627c915134015a6a1ab1aadbe6
libasteriskpj was hard coded to use -lrt but librt is linux specific
so we now use the LIB_RT variable which gets set by configure.
Change-Id: I41148884517e3031f7675a413d524c86e8614694
Fix support of OS's like openBSD that use an older nameser.h,
this change reverts the defines to the older style which on other
systems is found in nameser_compat.h
Tested on openBSD 6.0, Debian 8
ASTERISK-26608 #close
Change-Id: Iffb36caab8c5aa9dece0ce2d009041f7b56cc86a
OpenBSD's 'find' doesn't take the -delete argument so you have to pipe
through 'xargs rm -rf'.
'echo -e' doesn't like \t starting a line. It just prints 't' which
causes the libasteriskpj.exports file to be garbage. They were just
cosmetic so they were removed.
librt doesn't exist so the link of libasteriskpj.so fails. It's not
actually needed for linux anyway so -lrt was removed from the link.
res_rtp_asterisk was failing to load because of an undefined
DTLS_method. '|| defined(LIBRESSL_VERSION_NUMBER)' was added to the #if
so DTLSv1_method is used instead.
ASTERISK-26608
Change-Id: I926ec95b0b69633231e3ad1d6e803b977272c49c
When Opus is negotiated but not loaded, the log is spammed with messages
because the system does not know how to calculate the number of samples in
a frame.
* Suppress the warning by supplying a function that assumes 20ms of
samples in the frame. For pass through support it doesn't really seem to
matter what number of samples is returned anyway.
ASTERISK-26605 #close
Change-Id: Icf2273692f040dc2c45b01e72a790d11092f9e0f
One of the code paths in __ast_file_read_dirs will only get executed if
the OS doesn't support dirent->d_type OR if the filesystem the
particular file is on doesn't support it. So, while standard Linux
systems support the field, some filesystems like XFS do not. In this
case, we need to call stat() to determine whether the directory entry
is a file or directory so we append the filename to the supplied
directory path and call stat. We forgot to truncate path back to just
the directory afterwards though so we were passing a complete file name
to the callback in the dir_name parameter instead of just the directory
name.
The logic has been re-written to only create a full_path if we need to
call stat() or if we need to descend into another directory.
Change-Id: I54e4228bd8355fad65200c6df3ec4c9c8a98dfba
fopencookie/funclose is a non-standard API and should not be used
in portable software. Additionally, the way FILE's fd is used in
non-blocking mode is undefined behaviour and cannot be relied on.
This introduces internal abstraction for io streams, that allows
implementing the desired virtualization of read/write operations
with necessary timeout handling.
ASTERISK-24515 #close
ASTERISK-24517 #close
Change-Id: Id916aef418b665ced6a7489aef74908b6e376e85
In multi-party bridges, Asterisk currently supports two video modes:
* Follow the talker, in which the speaker with the most energy is shown
to all participants but the speaker, and the speaker sees the
previous video source
* Explicitly set video sources, in which all participants see a locked
video source
Prior to this patch, ARI had no ability to manipulate the video source.
This isn't important for two-party bridges, in which Asterisk merely
relays the video between the participants. However, in a multi-party
bridge, it can be advantageous to allow an external application to
manipulate the video source.
This patch provides two new routes to accomplish this:
(1) setVideoSource: POST /bridges/{bridgeId}/videoSource/{channelId}
Sets a video source to an explicit channel
(2) clearVideoSource: DELETE /bridges/{bridgeId}/videoSource
Removes any explicit video source, and sets the video mode to talk
detection
ASTERISK-26595 #close
Change-Id: I98e455d5bffc08ea5e8d6b84ccaf063c714e6621
This works the same as for AMI manager variables. Set
"channelvars=foo,bar" in your ari.conf general section, and then the
channel variables "foo" and "bar" (along with their values), will
appear in every Stasis websocket channel event.
ASTERISK-26492 #close
patches:
ari_vars.diff submitted by Mark Michelson
Change-Id: I5609ba239259577c0948645df776d7f3bc864229
Libedit 3.1 is not build with unicode on as a default and so the
prototype for the el_gets callback changed from expecting a char buffer
to accepting a wchar buffer. If ast_el_read_char isn't changed,
the cli reads garbage from teh terminal.
Added a configure test for (*el_rfunc_t)(EditLine *, wchar_t *) and
updated ast_el_read_char to use the HAVE_ define to detemrine whether
to use char or wchar.
ASTERISK-26592 #close
Change-Id: I9099b46f68e06d0202ff80e53022a2b68b08871a
There are several places in Asterisk that have duplicated logic
for deferring important frames until later.
This commit adds a couple of API calls to facilitate this automatically.
ast_channel_start_defer_frames(): Future reads of deferrable frames on
this channel will be deferred until later.
ast_channel_stop_defer_frames(): Any frames that have been deferred get
requeued onto the channel.
ASTERISK-26343
Change-Id: I3e1b87bc6796f222442fa6f7d1b6a4706fb33641
Adds an identifier (with a getter and setter) to detect channels with
interleaved audio.
This is needed by the binaural bridge_softmix patch (ASTERISK-26292) and
was already discussed here:
http://lists.digium.com/pipermail/asterisk-dev/2016-October/075900.html
The identifier can be set during fmtp parsing (to be seen in the
res_format_attr_opus.c change).
ASTERISK-26292
Change-Id: I359801cc5f98c35671c48dabc81a7f4ee1183d63
When a channel is made the video source, the bridge holds a reference to
it. Whenever the video source changes, that reference is released.
However, a ref leak does occur if the channel leaves the bridge (such as
being hung up) while it is the video source, as the bridge never
releases the ref in such a case.
This patch adds a line to the bridge_channel_internal_join routine such
that, when a channel finishes its time in the bridge, it notifies the
bridge via ast_bridge_remove_video_src that if it is a video source its
reference should be released.
ASTERISK-26555 #close
Change-Id: I3a2f5238a9d2fc49c591f0e65199d782ab0be76a
It's actually quite useful to see the source of a video stream change.
This doesn't happen terribly often, even with talk detection - but when
it does, it's nice to know which channel is now providing your video
stream.
As a verbose 5 level message, it shouldn't be terribly spammy or costly
to have, and is 'lower level' then most other verbose messages that the
bridge system emits.
ASTERISK-26555
Change-Id: Ia1c20ecafa9670171fd38bddcf3beccae47fb15c
The readdir_r function has been deprecated and should no longer be used. This
patch removes the readdir_r dependency (replaced it with readdir) and also moves
the directory search code to a more centralized spot (file.c)
Also removed a strict dependency on the dirent structure's d_type field as it
is not portable. The code now checks to see if the value is available. If so,
it tries to use it, but defaults back to using the stats function if necessary.
Lastly, for most implementations of readdir it *should* be thread-safe to make
concurrent calls to it as long as different directory streams are specified.
glibc falls into this category. However, since it is possible that there exist
some implementations that are not safe, locking has been added for those other
than glibc.
ASTERISK-26412
ASTERISK-26509 #close
Change-Id: Id8f54689b1e2873e82a09d0d0d2faf41964e80ba
Since adding all remaining rates of Signed Linear (ASTERISK-24274), SILK
(Gerrit 3136) and Codec 2 (ASTERISK-26217), no RTP Payload Type is left in the
dynamic range (96-127). RFC 3551 section 3 allows to reassign other ranges.
Consequently, when the dynamic range is exhausted, this change utilizes payload
types in the range between 35 and 63 giving room for another 29 payload types.
ASTERISK-26311 #close
Change-Id: I7bc96ab764bc30098a178b841cbf7146f9d64964
The NewConnectedLine event has been added by commit fe7671f, but the
documentation was missing.
ASTERISK-26537 #close
Change-Id: I7fc331f18caa28492da9303e576f70884ca8c9e6
Every ao2 object contains storage for a private variable data_size,
though the value is never read if AO2_DEBUG is disabled. This change
makes the variable conditional, reducing memory usage.
ASTERISK-26524 #close
Change-Id: If859929e507676ebc58b0f84247a4231e11da07f
main/Makefile includes third-party/pjproject/build.mak but
doesn't set PJDIR beforehand so "include $(PJDIR)/version.mak"
evaluates to "/version.mak". Fix is to set PJDIR in main/Makefile
before the include.
Change-Id: I0f7c67d60209049056fe9c4b041bf0463aa95604
It is only safe to run ast_register_cleanup callbacks when all modules
have been unloaded. Previously these callbacks were run during graceful
shutdown, making it possible to crash during shutdown.
ASTERISK-26513 #close
Change-Id: Ibfa635bb688d1227ec54aa211d90d6bd45052e21
ASTERISK_REGISTER_FILE no longer has any purpose so this commit removes
all traces of it.
Previously exported symbols removed:
* __ast_register_file
* __ast_unregister_file
* ast_complete_source_filename
This also removes the mtx_prof static variable that was declared when
MTX_PROFILE was enabled. This variable was only used in lock.c so it
is now initialized in that file only.
ASTERISK-26480 #close
Change-Id: I1074af07d71f9e159c48ef36631aa432c86f9966
ARI and AMI allow for an explicit channel ID to be specified
when originating channels. Unfortunately, there is nothing in
place to prevent someone from using the same ID for multiple
channels. Further complicating things, adding ID validation to channel
allocation makes it impossible for ARI to discern why channel allocation
failed, resulting in a vague error code being returned.
The fix for this is to institute a new method for channel errors to be
discerned. The method mirrors errno, in that when an error occurs, the
caller can consult the channel errno value to determine what the error
was. This initial iteration of the feature only introduces "unknown" and
"channel ID exists" errors. However, it's possible to add more errors as
needed.
ARI uses this feature to determine why channel allocation failed and can
return a 409 error during origination to show that a channel with the
given ID already exists.
ASTERISK-26421
Change-Id: Ibba7ae68842dab6df0c2e9c45559208bc89d3d06
CDRs form chains. When the root of the chain is destroyed, it then
unreferences the next CDR in the chain. That CDR is destroyed, and it
then unreferences the next CDR in the chain. This repeats until the end
of the chain is reached. While this typically does not cause any sort of
problems, it is possible in strange scenarios for the CDR chain to grow
way longer than expected. In such a scenario, the destruction pattern
can result in a stack overflow.
This patch fixes the problem by switching from a recursive pattern to an
iterative pattern for destruction. When the root CDR is destroyed, it is
responsible for iterating over the rest of the CDRs and unreferencing
each one. Other CDRs in the chain, since they are not the root, will
simply destroy themselves and be done. This causes the stack depth not
to increase.
ASTERISK-26421 #close
Reported by Andrew Nagy
Change-Id: I3ca90c2b8051f3b7ead2e0e43f60d2c18fb204b8
Since Asterisk 1.8, the command "core set debug" on the command-line interface
asks not for a file (.c) but a module name. This change shows modules (.so) on
the auto-completion via a tabulator or the question mark. Now, when you
partially type a module name, TAB or ?, you get the correct candidiates.
ASTERISK-26480
Change-Id: I1213f1dd409bd4ff8de08ad80cb0c73cafb1bae0
ast_set_default_eid was searching for ethX, emX, enoX, ensX and even
pciD#U interface names. While this was a good attempt, it wasn't
inclusive enough to capture interfaces like enp6s0 or ens6d1, etc.
Rather than relying on interface names, we now simply find the first
interface returned by the OS that has a hardware address and that
address isn't all 0x00 or all 0xff. The code IS different for BSD,
Solaris and Linux based on what method is available for enumerating
interfaces.
Tested on:
FreeBSD9
CentOS6
Ubuntu14
Fedora24
I was unable to test on Solaris at this time but the code for Solaris
is used elsewhere at Digium.
Change-Id: Iaa6db87ca78a9a375e47d70e043ae08c1448cb72
Added needed UTF-8 checks before constructing json objects in various
files for strings obtained outside the system. In this case string values
from a channel driver's peer and not from the user setting channel
variables.
* aoc.c: Fixed type mismatch in s_to_json() for time and granularity json
object construction.
ASTERISK-26466
Reported by: Richard Mudgett
Change-Id: Iac2d867fa598daba5c5dbc619b5464625a7f2096
* Updated unit test as ast_json_name_number() is now NULL tolerant.
ASTERISK-26466 #close
Reported by: Richard Mudgett
Change-Id: I7d4e14194f8f81f24a1dc34d1b8602c0950265a6
Since the json library does not make the check function public we
recreate/copy the function in our interface module.
ASTERISK-26466
Reported by: Richard Mudgett
Change-Id: I36d3d750b6f5f1a110bc69ea92b435ecdeeb2a99
* In s_to_json() removed unnecessary ast_json_ref() to ast_json_null()
when creating the type json object. The ref is a noop.
Change-Id: I2be8b836876fc2e34a27c161f8b1c53b58a3889a
Remote asterisk consoles should only display verbose log messages
created by the daemon. The first patch for ASTERISK-26410 caused
a couple verbose messages to be printed when the rasterisk process
ended.
ASTERISK-26410
Change-Id: Ie2a1bb3753ad2724c0349ec1a336f52f7117b52a
The main frame read and write handlers in main/channel.c don't use the
optimum placement in the processing flow for calling audiohooks
callbacks, as far as codec translation is concerned. This change places
the audiohooks callback code:
* After the channel read translation if the frame is not linear before
the translation, thereby increasing the chance that the frame is linear
as required by audiohooks
* Before the channel write translation if the frame is linear at this
point
This prevents the audiohooks code from instantiating additional
translation paths to/from linear where a linear frame format is already
available, saving valuable CPU cycles
ASTERISK-26419
Change-Id: I6edd5771f0740e758e7eb42558b953f046c01f8f
This change introduced some fax test failures
that have not yet been addressed. So this is
not forgotten I'm submitting a change which
reverts it.
This reverts:
d56fc3b36b.
ASTERISK-25629
Change-Id: Ibc2f23c38643f5a2c89cf8915ae2d805b81bc3d5
Asterisk only supports mono audio at the moment.
This patch adds interleaved two-channel audio to Asterisk's channels.
ASTERISK-26292
Change-Id: I7a547cea0fd3c6d1e502709d9e7e39605035757a
* Compile __ast_assert_failed unconditionally.
* Use __ast_assert_failed to log messages from log_bad_ao2
* Remove calls to ast_assert(0) that happen after log_bad_ao2 was run.
Change-Id: I48f1af44b2718ad74a421ff75cb6397b924a9751
This allows asterisk to compiled with LOW_MEMORY to load modules built
without LOW_MEMORY.
ASTERISK-26398 #close
Change-Id: I24b78ac9493ab933b11087a8b6794f3c96d4872d
Verbose messages should be printed to the console if the sublevel is
less than option_verbose. This fix ensures the welcome message with
copyright and license are printed at daemon and interactive rasterisk
startup.
ASTERISK-26410 #close
Change-Id: Ia44235e30ec328aba92ea2c8a837b094e65c9a03
Users upgrading from asterisk 13.5 to a later version and who use
realtime with peers that have mailboxes were experiencing runaway
situations that manifested as a continuous stream of taskprocessor
congestion errors, memory leaks and an unresponsive chan_sip.
A related issue was that setting rtcachefriends=no NEVER worked in
asterisk 13 (since the move to stasis). In 13.5 and earlier, when a
peer tried to register, all of the stasis threads would block and
chan_sip would again become unresponsive. After 13.5, the runaway
would happen.
There were a number of causes...
* mwi_event_cb was (indirectly) calling build_peer even though calls to
mwi_event_cb are often caused by build_peer.
* In an effort to prevent chan_sip from being unloaded while messages
were still in flight, destroy_mailboxes was calling
stasis_unsubscribe_and_join but in some cases waited forever for the
final message.
* add_peer_mailboxes wasn't properly marking the existing mailboxes
on a peer as "keep" so build_peer would always delete them all.
* add_peer_mwi_subs was unsubscribing existing mailbox subscriptions
then just creating them again.
All of this was causing a flood of subscribes and unsubscribes on
multiple threads all for the same peer and mailbox.
Fixes...
* add_peer_mailboxes now marks mailboxes correctly and build_peer only
deletes the ones that really are no longer needed by the peer.
* add_peer_mwi_subs now only adds subscriptions marked as "new" instead
of unsubscribing and resubscribing everything. It also adds the peer
object's address to the mailbox instead of its name to the subscription
userdata so mwi_event_cb doesn't have to call build_peer.
With these changes, with rtcachefriends=yes (the most common setting),
there are no leaks, locks, loops or crashes at shutdown.
rtcachefriends=no still causes leaks but at least it doesn't lock, loop
or crash. Since making rtcachefriends=no work wasnt in scope for this
issue, further work will have to be deferred to a separate patch.
Side fixes...
* The ast_lock_track structure had a member named "thread" which gdb
doesn't like since it conflicts with it's "thread" command. That
member was renamed to "thread_id".
ASTERISK-25468 #close
Change-Id: I07519ef7f092629e1e844f855abd279d6475cdd0
When retrieving presence state information there is no
guarantee that the subtype and message passed in are
set to NULL. This change ensures they are.
ASTERISK-26397 #close
Change-Id: If38cd730e409e9a9b6eb9adef6591d15a9e61f86
Routines responsible for managing ast_callid's are overly complicated.
This is left-over code from when ast_callid was an AO2 object. Now that
it is an integer the code can be reduced.
ast_callid handler code no longer prints it's own error message upon failure
to allocate threadstorage as ast_calloc would have already printed a
message. Debug messages that were printed when TEST_FRAMEWORK was
enabled have been also been removed.
Change-Id: I65a768a78dc6cf3cfa071e97f33ce3dce280258e
Previous versions of Asterisk did not require verbose to be specified in
logger.conf for the console channel, if it was requested by command line
or asterisk.conf it just worked. This change causes Asterisk to always
enable verbose in the console channel level mask. Verbose is displayed
on consoles if requested by command line, option_verbose or 'core set
verbose'.
This also delays initialization of the logger until after threadstorage
is initialized. Initializing too early can cause messages to be printed
multiple times to the console (stdout).
ASTERISK-26391 #close
Change-Id: I52187d67c2fcb3efd5561bf04b3e5e23e5ee8a04
When logger.conf is missing or invalid we should be printing notices,
warnings and errors to the console. The logmask was incorrectly
calculated.
Change-Id: Ibaa9465a8682854bc1a5e9ba07079bea1bfb6bb3
Without this change, a 'core restart' would kill the astcanary forever
if you're not running as root. Both with and without this patch, the
scheduling priority was still SCHED_RR after restart.
Additionally, the astcanary is now spawned if you start with high
priority and Asterisk doesn't get a chance to lower it. For example
through: `chrt -r 10 sudo -u asterisk asterisk -c`
Also reap killed astcanary processes on core restart.
ASTERISK-26352 #close
Change-Id: Iacb49f26491a0717084ad46ed96b0bea5f627a55
Previously only the canary checking thread itself had its priority set
to SCHED_OTHER. Now all threads are traversed and adjusted.
ASTERISK-19867 #close
Reported by: Xavier Hienne
Change-Id: Ie0dd02a3ec42f66a78303e9c1aac28f7ed9aae39
When receiving an SDP offer with multiple payloads for
the same format we would generate an answer with the first
payload, but during the payload crossover operation
(to set the payloads for receiving) we would remove all
payloads but the last. This would result in incoming
traffic being matched against the wrong format and outgoing
traffic being sent using the wrong payload.
This change makes it so that once a format has a payload
number put into the mapping all subsequent ones are ignored.
This ensures there is only ever one payload in the mapping
and that it is the payload placed into the answer SDP.
ASTERISK-26365 #close
Change-Id: I1e8150860a3518cab36d00b1fab50f9352b64e60
sd_notify() is used to notify systemd of changes to the status of the
process. This allows the systemd daemon to know when the process
finished loading (and thus only start another program after Asterisk has
finished loading).
To use this, use a systemd unit with 'Type=notify' for Asterisk.
This commit also adds the function ast_sd_notify(), a wrapper around
sd_notify that does nothing if not built with systemd support.
Also adds support for libsystemd detection in the configure script.
Change-Id: Ied6a59dafd5ef331c5c7ae8f3ccd2dfc94be7811
If sysinfo() is available, but not sysctl() or swapctl() the
printing code for swap buffer sizes is incorrectly omitted.
The above condition happens with musl c-library.
Fix #if rule to consider defined(HAVE_SYSINFO). And also
remove the redundant || defined(HAVE_SYSCTL) which was
incorrectly there to start with. Now swap information is
displayed only if an actual libc function to get it is
available.
This also fixes warnings previously seen with musl libc:
[CC] asterisk.c -> asterisk.o
asterisk.c: In function 'handle_show_sysinfo':
asterisk.c:773:6: warning: variable 'totalswap' set but not used
[-Wunused-but-set-variable]
int totalswap = 0;
^~~~~~~~~
asterisk.c:770:11: warning: variable 'freeswap' set but not used
[-Wunused-but-set-variable]
uint64_t freeswap = 0;
^~~~~~~~
Change-Id: I1fb21dad8f27e416c60f138c6f2bff03fb626eca
Currently when receiving video over RTP we store only
a calculated samples on the frame. When starting the video
it can take some time for this calculation to actually yield
a value as it requires constant changing timestamps. As well
if a video frame passes over multiple RTP packets this calculation
will fail as the timestamp is the same as the previous RTP
packet and the number of samples calculated will be 0.
This change preserves the timestamp on the frame and allows
it to pass through the core. When sending the video this timestamp
is used instead of a new one being calculated.
ASTERISK-26367 #close
Change-Id: Iba8179fb5c14c9443aee4baf670d2185da3ecfbd
Create an alternative to ast_sorcery_generic_alloc which uses astobj2
shared locking. Use this new method for the 'struct ast_sip_aor' allocator.
Change-Id: I3f62f2ada64b622571950278fbb6ad57395b5d6f
This allows standard ao2 functions to be used to release references to
an ast_named_lock. This change can cause less frequent locking of the
global named_locks container. The container is no longer locked when a
named_lock reference is being release except when this causes the
named_lock to be destroyed.
Change-Id: I644e39c6d83a153d71b3fae77ec05599d725e7e6
Previously, if context A was including context B and context B was including
context A, i.e. if there was a circular dependency between contexts, then
calling manager_show_dialplan_helper could lead to an infinite recursion,
resulting in a crash.
This commit applies the same solution as the one implemented in the
show_dialplan_helper function. The manager_show_dialplan_helper and
show_dialplan_helper functions contain lots of code in common, but the former
was missing the "infinite recursion avoidance" code.
ASTERISK-26226 #close
Change-Id: I1aea85133c21787226f4f8442253a93000aa0897
In your Diaplan, if you specify
same => n,Set(CHANNEL(secure_bridge_media)=1)
same => n,Set(CHANNEL(secure_bridge_signaling)=1)
only the SIP channel driver chan_sip supports this. All other channels drivers
like res_pjsip fail. In case of failure, the original sRTP source code released
the whole channel, even if not hung-up, yet. This change does not release the
channel but instead hangs-up the channel.
ASTERISK-26306
Change-Id: I0489f0cb660fab6673b0db8af027d116e70a66db
MALLOC_DEBUG should not be used to check if debugging is actually
enabled, __AST_DEBUG_MALLOC should be used instead. MALLOC_DEBUG only
indicates that debugging is requested, __AST_DEBUG_MALLOC indicates it
is active.
Change-Id: I3ce9cdb6ec91b74ee1302941328462231be1ea53
Allocator functions that take file/line/func parameters are prefixed
with single-underscore when MALLOC_DEBUG is not defined,
double-underscore when it is defined. This change updates all
allocators that accept file/line/func to have the same prototype in
either ABI mode. The parameter order of __ast_vasprintf and
__ast_asprintf in utils.h have been changed to match that of astmm.h.
End-use allocator macro's have been removed from astmm.h and moved to an
unconditional part of utils.h.
Change-Id: I823bb6ce2b5675b3a4735948f10a3b420e9a023a
updated the uri handler to include the url prefix of the http server
this enables res_ari to add it to the uris when generating docs
Change-Id: I279335a2625261a8492206c37219698f42591c2e
(cherry picked from commit 6f448f32fe)
This updates func_channel.c and main/message.c to use a generic xpointer
include instead of including info from each channel driver. Now the
name attribute of info is CHANNEL or CHANNEL_EXAMPLES to be included in
documentation for func_channel. Setting the name attribute of info to
MessageToInfo or MessageFromInfo causes it to be included in the
MessageSend application and AMI action.
Change-Id: I89fd8276a3250824241a618009714267d3a8d1ea
The Exchanging Device and Mailbox States could not working
if the Entity ID (EID) is not set manually and can't be obtained
from ethernet interface.
This patch replaces debug message to warning
and addes missing description about option 'entityid' to
asterisk.conf.sample.
With this patch the asterisk also:
(1) decline loading the modules which won't work without EID:
res_corosync and res_pjsip_publish_asterisk.
(2) warn if EID is empty on loading next modules:
pbx_dundi, res_xmpp
Starting with v197 systemd/udev will automatically assign "predictable"
names for all local Ethernet interfaces.
This patch also addes some new ethernet prefixes "eno" and "ens".
ASTERISK-26164 #close
Change-Id: I72d712f1ad5b6f64571bb179c5cb12461e7c58c6
* Remove some unused parameters from internal functions:
sorcery_wizard_create()
sorcery_wizard_update()
sorcery_wizard_delete()
* Created the struct sorcery_observer_invocation ao2 object without a lock
since it is not needed in sorcery_observer_invocation_alloc().
* Cleanup generic ao2 container sorcery object id hash, sort, and cmp
functions.
Change-Id: Iff71d75f52bc1b8cee955456838c149faaa4f92e
Do not check registrar of the first extension head. We should only check
the registrar when we match the priority.
Additionally fix a couple calls to strcmp which used the input callerid
instead of the clean version ex.cidmatch.
ASTERISK-26233
Change-Id: I17ea6881a18f40840ae9c1f5394aab1fbb3769f1
This patch adds some see-also references between related AMI events. It
focuses primarily on those events that are guaranteed to come in pairs,
such as DTMFBegin/DTMFEnd, as well as those that occur during the life
cycle of an Asterisk channel, such as Newchannel/Hangup.
Change-Id: Iaab600477052018d0f8c03d0c624c0856e9ff1f3
Errors during startup result in an exit. These error branches should be
calling ast_run_atexit(0) to ensure mandatory cleanup is run.
ASTERISK-26267 #close
Change-Id: If226f2326ae2df7add20040696132214cf2bb680
* The high water check in ast_taskprocessor_alert_set_levels() would
trigger immediately if the new high water level is zero and the queue was
empty.
* The high water check in taskprocessor_push() was off by one.
Change-Id: I687729fb4efa6a0ba38ec9c1c133c4d407bc3d5d
The named aor lock was always being locked for writes so a rwlock adds no
benefit and may be slower because rwlocks are biased toward read locking.
Change-Id: I8c5c2c780eb30ce5441832257beeb3506fd12b28
The non-module libs libasteriskssl.dylib and libasteriskpj.dylib have
long been missing the AST_NOT_MODULE compile flag. This was mostly
okay, until a recent fix to improve compiler warnings when the
AST_MODULE_SELF_SYM is missing broke the build on OS X/macOS/whatever
they are calling it these days.
Change-Id: I2cb51c890824f001280a5114f2e775f97c163516
A patch made to the master branch (Now the 14 branch) inadvertently made
libsrtp a required dependency in order to compile Asterisk. Rather than
create dummy defines to substitute for the defines supplied by libsrtp
when libsrtp is not available, most of the code in sdp_srtp.c is moved
into res_srtp.c. This gets more code out of Asterisk's core that isn't
used when SRTP is not available. This also makes another inadvertent
required dependency on libsrtp by Asterisk's core unlikely.
ASTERISK-26253 #close
Reported by: Ben Merrills
Change-Id: I0a46cde81501c0405399c2588633ae32706d1ee7
If both channels which should be masqueraded
are in the same serializer:
1st channel will be locked waiting condition 'complete'
2nd channel will be locked waiting condition 'suspended'
On heavy load system a chance that both channels will be in
the same serializer 'pjsip/distibutor' is very high.
To reproduce compile res_pjsip/pjsip_distributor.c with
DISTRIBUTOR_POOL_SIZE=1
Steps to reproduce:
1. Party A calls Party B (bridged call 'AB')
2. Party B places Party A on hold
3. Party B calls Voicemail app (non-bridged call 'BV')
4. Party B attended transfers Party A to voicemail using REFER.
5. When asterisk masquerades calls 'AB' and 'BV',
a deadlock is happened.
This patch adds a suspension indicator to the taskprocessor.
When a session suspends/unsuspends the serializer
it sets the indicator to the appropriate state.
The session checks the suspension indicator before
suspend the serializer.
ASTERISK-26145 #close
Change-Id: Iaaebee60013a58c942ba47b1b4930a63e686663b
Modules must define AST_MODULE_SELF_SYM to be used as the name of a
generated function. This produces a friendly error when it's not
defined.
ASTERISK-26278 #close
Change-Id: Ib9d35a08104529c516d636771365e02c6e77a45b
This ensures startup is canceled due to allocation failures from the
following initializations.
* channel.c: ast_channels_init
* config_options.c: aco_init
ASTERISK-26265 #close
Change-Id: I911ed08fa2a3be35de55903e0225957bcdbe9611
SILK is a bit of a hog when it comes to using up our limited number of
dynamic payload types in the RTP engine. By freeing up four slots, it
allows for other codecs to potentially take the place.
Now, codec_silk.so will dynamically use the payload slots in the RTP
engine when it loads.
A better fix would be make RTP dynamic payload types actually
dynamic. However, at this stage of Asterisk 14 development, this is a
risky move that would be imprudent.
Change-Id: I5774e09408f9a203db189529eabdc0d3f4c1e612
This adds a two strings to ast_exten. name to go with exten and
cidmatch_display to go with cidmatch. The new fields contain input used
to add the extension in the first place. The existing fields now
contain stripped input that excludes insignificant spaces and dashes.
These stripped fields should always be used for comparisons. The
unstripped fields should normally be used for display, but displaying
stripped values will not cause runtime errors.
Note the actual string is only stored twice if it contains dashes. If
no dashes are found then both 'char *' fields point to the same memory.
So this change has a minimum effect on memory usage.
The existing functions ast_get_extension_name and
ast_get_extension_cidmatch return unstripped values as they did before
this change. Other similar bugs likely still exist where unstripped
extensions are saved outside pbx.c then passed back in.
ASTERISK-26233 #close
Change-Id: I6cd61ce57acc1570ca6cc14960c4c3b0a9eb837f
We can allow dangerous functions when adding a hint since altering
dialplan is itself a privileged activity. Otherwise, we could never
execute dangerous functions.
ASTERISK-25996 #close
Reported by: Andrew Nagy
Change-Id: I4929ff100ad1200a0198262d069a34f2296e77ba
Fixed an assert check that would trigger when the passed in value was negative.
The negative value was being cast to an unsigned value. This resulted in the
check failing.
Also fixed another problem when loading formats in the engine. When setting the
mime type the format's name was being passed in instead of the codec's name.
Change-Id: I1a201cd419ba4d8e9a40d337e36b6fbe1737192c
The Goertzel calculations get less accurate the lower the signal level
being worked with becomes because there is less resolution remaining.
If it is too low we can erroneously detect a tone where none really
exists. The searched for fax frequencies not only need to be so much
stronger than the background noise they must also be a minimum strength.
* Add needed minimum threshold test to tone_detect().
* Set TONE_THRESHOLD to allow low volume frequency spread detection.
ASTERISK-26237 #close
Reported by: Richard Mudgett
Change-Id: I84dbba7f7628fa13720add6a88eae3b129e066fc
Asterisk already supported iLBC 30. This change adds iLBC 20. Now, Asterisk
defaults to iLBC 20 but falls back to iLBC 30, when the remote party requests
this.
ASTERISK-26218 #close
ASTERISK-26221 #close
Reported by: Aaron Meriwether
Change-Id: I07f523a3aa1338bb5217a1bf69c1eeb92adedffa
Merge code found in both branches of a conditional in
ast_add_extension2_lockopt.
The updated code initializes peer_table and peer_label_table of the
extension before linking it to the context.
Change-Id: Ic759e27cdc9906c6877df41d28ee9c5be8f41c20
This changes context switches from a linked list to a vector, makes
'struct ast_sw' opaque to pbx.c.
Although ast_walk_context_switches is maintained the procedure is no
longer efficient except for the first call (inc==NULL). This
functionality is replaced by two new functions implemented by vector
macros.
* ast_context_switches_count (AST_VECTOR_SIZE)
* ast_context_switches_get (AST_VECTOR_GET)
As with ast_walk_context_switches callers of these functions are
expected to have locked contexts. Only a few places in Asterisk walked
the switches, they have been converted to use the new functions.
Change-Id: I08deb016df22eee8288eb03de62593e45a1f0998
This adds support for tagging functions with the noreturn attribute.
If DO_CRASH is enabled then ast_do_crash never returns. If AST_DEVMODE
and DO_CRASH are enabled then failed assertions never return. This can
resolve a large number of false positives with static analyzers.
ASTERISK-26220 #close
Change-Id: Icfb61e5fe54574eced4c3e88b317244f467ec753
The new endpoint option allows the PJSIP channel driver's fax_detect
endpoint option to timeout on a call after the specified number of
seconds into a call. The new feature is disabled if the timeout is set
to zero. The option is disabled by default.
ASTERISK-26214
Reported by: Richard Mudgett
Change-Id: Id5a87375fb2c4f9dc1d4b44c78ec8735ba65453d
This changes context ignore patterns from a linked list to a vector,
makes 'struct ast_ignorepat' opaque to pbx.c.
Although ast_walk_context_ignorepats is maintained the procedure is no
longer efficient except for the first call (inc==NULL). This
functionality is replaced by two new functions implemented by vector
macros.
* ast_context_ignorepats_count (AST_VECTOR_SIZE)
* ast_context_ignorepats_get (AST_VECTOR_GET)
As with ast_walk_context_ignorepats callers of these functions are
expected to have locked contexts. Only a few places in Asterisk walked
the ignorepats, they have been converted to use the new functions.
Change-Id: I78f2157d275ef1b7d624b4ff7d770d38e5d7f20a
This changes context includes from a linked list to a vector, makes
'struct ast_include' opaque to pbx.c.
Although ast_walk_context_includes is maintained the procedure is no
longer efficient except for the first call (inc==NULL). This
functionality is replaced by two new functions implemented by vector
macros.
* ast_context_includes_count (AST_VECTOR_SIZE)
* ast_context_includes_get (AST_VECTOR_GET)
As with ast_walk_context_includes callers of these functions are
expected to have locked contexts. Only a few places in Asterisk walked
the includes, they have been converted to use the new functions.
const have been applied where possible to parameters for ast_include
functions.
Change-Id: Ib5c882e27cf96fb2aec67a39c18b4c71c9c83b60
This commit adds scaffolding in order to support the SILK audio format
on calls. Roughly, this is what is added:
* Cached silk formats. One for each possible sample rate.
* ast_codec structures for each possible sample rate.
* RTP payload mappings for "SILK".
In addition, this change overhauls the res_format_attr_silk file in the
following ways:
* The "samplerate" attribute is scrapped. That's native to the format.
* There are far more checks to ensure that attributes have been
allocated before attempting to reference them.
* We do not SDP fmtp lines for attributes set to 0.
These changes make way to be able to install a codec_silk module and
have it actually work. It also should allow for passthrough silk calls
in Asterisk.
Change-Id: Ieeb39c95a9fecc9246bcfd3c45a6c9b51c59380e
Create include_free to run ast_destroy_timing and ast_free, use that in
all places that freed an ast_include structure. This fixes a couple of
paths that previously did not run ast_destroy_timing.
ASTERISK-26196 #close
Change-Id: I1671bd111bef0dc113e8bf8f77f89fcfc395d838
If the destination format's name differed from the codec name then the
translator's explict_dst field would be improperly set. In some circumstances
it would end up setting it to a newly created format that has the same name
as the codec when it actually needed to be the given destination codec.
This could cause the translation path to use the wrong format. For instance,
if an endpoint had specified 'myulaw' as a format the translator could end up
using a 'ulaw' format (with whatever/default settings) instead. If the format
attribute settings differed between the two then there may unexpected results
during processing.
This patch removes the name check when building the translation path. This
should make it always set the translator's explicit_dst to the given destination
format as long as the sample rate and types match.
Change-Id: Iaf8a03831d68e657d89569d54b505074efbefab5
The roundtrip_usec json member is optional. If it isn't present then
don't put it into the converted json structure where ast_json_pack()
will choke on it.
Change-Id: I39bb2f86154ef54591270c58bfda8635070f9ea0
ast_threadpool_serializer_group leaks a reference to ser when listener
is allocated but tps is not. Although listener takes the reference to
ser cleanup functions are not run without tps.
ASTERISK-26191 #close
Change-Id: Ie3ccf69a3f1e676c2ef62a77067c0cb57dc9a585
When res_corosync detects that a node leaves or joins, it currently is
informed of this via Corosync callbacks. However, there are a few
limitations with the information presented:
(1) While we have information that Corosync is aware of - such as the
Corosync nodeid - that information is really only useful inside of
Corosync or res_corosync. There's no way to translate a Corosync
nodeid to some other internally useful unique identifier for the
Asterisk instance that just joined or left the cluster.
(2) While res_corosync is notified of the instance joining or leaving
the cluster, it has no mechanism to inform the Asterisk core or
other modules of this event. This limits the usefulness of res_corosync
as a heartbeat mechanism for other modules.
This patch addresses both issues.
First, it adds the notion of a cluster discovery message both within the
Stasis message bus, as well as the binary event messages that
res_corosync uses to transmit data back and forth within the cluster.
When Asterisk joins the cluster, it sends a discovery message to the other
nodes in the cluster, which correlates the Corosync nodeid along with
the Asterisk EID. res_corosync now maintains a hash of Corosync nodeids
to Asterisk EIDs, such that it can map changes in cluster state with the
Asterisk instance that has that nodeid. Likewise, when an Asterisk
instance receives a discovery message from a node in the cluster, it now
sends its own discovery message back to the originating node with the
local Asterisk EID. This lets Asterisk instances within the cluster
build a complete picture of the other Asterisk instances within the
cluster.
Second, it publishes the discovery messages onto the Stasis message bus.
Said messages are published whenever a node joins or leaves the cluster.
Interested modules can subscribe for the ast_cluster_discovery_type()
message under the ast_system_topic() and be notified when changes in
cluster state occur.
Change-Id: I9015f418d6ae7f47e4994e04e18948df4d49b465
* We weren't properly subscribing to the channel and it's originator
on create.
* We weren't doing a publish_dial after calling ast_call on dial.
* We weren't calling depart_bridge when a channel left the dial bridge.
The first 2 issues were causing events to not be generated and the third
was actually causing channels to not get properly destroyed when hung up.
Together these 3 issues were causing the new
rest_apichannels/create_dial_bridge tests to fail.
As a result of the fixes, the cdr state machine had to be slightly
tweaked to allow bridge leave events without asserting and the tests
themselves had to be updated to account for the channels now cleaning
themselves up.
Change-Id: Ibf23abf5a62de76e82afb4461af5099c961b97d8
Thanks to ibercom for pointing out a memory leak that was missed
in the earlier patch for the issue.
ASTERISK-26119
Reported by: Alexei Gradinari
Change-Id: I9a151f5c4725d97fb82a9e938bc73dc659532b71
Using AO2_CONTAINER_ALLOC_OPT_DUPS_REPLACE can result in an unref being
recorded to the refs log for the node being replaced. This prevents
logging of those unrefs since they would produce errors in
refcounter.py.
ASTERISK-26181 #close
Change-Id: Ie4fded84e8a1a58b3a59ce59dfd7eb0da3ddc5d4
Found as a result of the testsuite tests/callparking test crashing.
Several calls to ast_get_chan_featuremap_config() and
ast_get_chan_features_xfer_config() did not lock the channel before
calling so the channel's datastore list was accessed without the lock's
protection. Apparently another thread deleted a datastore on the
channel's list while the crashing thread was walking the list. Crash at
0xdeaddead due to MALLOC_DEBUG's memory filler value as a result.
* Add missing channel locks to calls that were not already protected
as the doxygen for those calls indicates.
Change-Id: Id273b3d305cc616406c353cbc841b2b7655efaa1
Adding format_name even to the end of ast_codec caused issued with
binary codec modules because the pointer would be garbage in asterisk
when they registered. So, the ast_codec structure was reverted and an
internal_ast_codec structure was created just for use in codec.c. A new
internal-only API was also added (__ast_codec_register_with_format) so
that codec_builtin could register codecs with the format_name in a
separate parameter rather than in the ast_codec structure.
ASTERISK-26144 #close
Reported-by: Alexei Gradinari
Change-Id: I6df1b08f6a6ae089db23adfe1ebc8636330265ba
gcc 6.1.1 caught a few more issues.
Made sure the unit tests still pass for the func_env and stdtime
issues.
ASTERISK-26157 #close
Change-Id: I6664d8f34a45bc1481d2a854481c7878b0c1cf8e
A non-existent constraint was being referenced in the upgrade script.
This patch corrects the problem by removing the reference.
In addition, the head of the alembic branch referred to a non-existent
revision. This has been fixed by referring to the proper revision.
This patch fixes another realtime problem as well. Our Alembic scripts
store booleans as yes or no values. However, Sorcery tries to insert
"true" or "false" instead. This patch introduces a new boolean type that
translates to "yes" or "no" instead.
ASTERISK-26128 #close
Change-Id: I51574736a881189de695a824883a18d66a52dcef
The internal HTTP/WebSocket server supports both TCP and TLS, which can be
activated separately via the file http.conf. The source code intends to re-use
the TCP parameter 'bindaddr' for TLS, even if 'tlsbindaddr' is not specified
explicitly. This did not work because of a typo. This change resolves this typo.
ASTERISK-26126 #close
Change-Id: I5efb0409ae12044dfb3495b6b97b6d40a8c9c51f
With CLI "core show settings", simply the parameter maxfiles of the file
asterisk.conf was shown. If that parameter was not set, nothing was displayed
although the environment might have set a default number itself. Or if maxfiles
were not granted (completely), still maxfiles was shown. Now, the maximum number
of possible file descriptors in the environment is shown.
ASTERISK-26097
Change-Id: I2df5c58863b5007b34b77adbe28b885dfcdf7e0b
With menuselect "DEBUG_FD_LEAKS" and CLI "core show fd", both the maximum max
and current max of possible file descriptors were shown. Both show the same
value always. Not to confuse users, just the current maximum is shown now.
ASTERISK-26097
Change-Id: I49cf7952d73aec9e3f6a88942842c39be18380fa
CEL wrongly assumed that a channel would only have a single dial
event on it. This is incorrect. Particularly in a queue each
call attempt to a member will result in a dial event, adding
a new dial status in CEL without removing the old one. This
would cause the container to grow with only one dial status
being removed when the channel went away. The other dial status
entries would remain leaking memory.
This change fixes the memory leak by ensuring that only one dial
status will only ever exist for each channel.
The behavior during the scenario where multiple events are received
has also been improved. For failure cases the first failure will
be the dial status. If an answer dial status is received, though,
it will take priority and the dial status for the channel will be
answer.
Memory usage has also been decreased by storing the minimal
amount of information and the code has been cleaned up slightly.
ASTERISK-25262 #close
Change-Id: I5944eb923db17b6a0faa7317ff6abc9307c009fe
Scenario: Caller blonde transfer
Bob calls Charlie who answers.
Bob puts Charlie on hold and calls Alice.
Before Alice answers, Bob transfers Charlie to Alice.
Charlie's channel triggers an assert because he gets an "ANSWERED"
event even though he never dialed anything. With recent changes to dial
events, this is now a valid scenario so the assert needed to be removed.
ASTERISK-26103 #close
Change-Id: I2679b517b696e7952ab7fb29403df9140e7d1de2
Stasis subscriptions and message routers create taskprocessors to process
the event messages. API calls are needed to be able to set the congestion
levels of these taskprocessors for selected subscriptions and message
routers.
* Updated CDR, CEL, and manager's stasis subscription congestion levels
based upon stress testing. Increased the congestion levels to reduce the
potential for bursty call setup/teardown activity from triggering the
taskprocessor overload alert. CDRs in particular need an extra high
congestion level because they can take awhile to process the stasis
messages.
ASTERISK-26088
Reported by: Richard Mudgett
Change-Id: Id0a716394b4eee746dd158acc63d703902450244
Sorcery creates taskprocessors for object types to process object observer
callbacks. An API call is needed to be able to set the congestion levels
of these taskprocessors for selected object types.
* Updated PJSIP's contact and contact_status sorcery object type observer
default congestion levels based upon stress testing. Increased the
congestion levels to reduce the potential for bursty register/unregister
and subscribe/unsubscribe activity from triggering the taskprocessor
overload alert.
ASTERISK-26088
Reported by: Richard Mudgett
Change-Id: I4542e83b556f0714009bfeff89505c801f1218c6
When taskprocessors get backed up, there is a good chance that we are
being overloaded and need to defer adding new work to the system.
* Implemented a high/low water alert mechanism for modules to check if the
system is being overloaded and take appropriate action. When a
taskprocessor is created it has default congestion levels set. A
taskprocessor can later have those congestion levels altered for specific
needs if stress testing shows that the taskprocessor is a symptom of
overloading or needs to handle bursty activity without triggering an
overload alert.
* Add CLI "core show taskprocessor" low/high water columns.
* Fixed __allocate_taskprocessor() to not use RAII_VAR(). RAII_VAR() was
never a good thing to use when creating a taskprocessor because of the
nature of how its references needed to be cleaned up on a partial
creation.
* Made res_pjsip's distributor check if the taskprocessor overload alert
is active before placing a message representing brand new work onto a
distributor serializer.
ASTERISK-26088
Reported by: Richard Mudgett
Change-Id: I182f1be603529cd665958661c4c05ff9901825fa
POSIX defines signal.h. sys/signal.h should not be used as it is
c-library internal header which may or may not exist. Notably with
musl it generates warning of being incorrect.
Change-Id: Ia56b0aa1d84b5c590114867b1b384a624f39a6fc
Icelandic has some weird grammar rules when dealing with dates and
numbers. There are different genders used depending on which number
you're dealing with, and only a handful of numbers do change depending
on the gender. There is also an implied gender in several cases.
This patch was originally written for asterisk 1.6, and has been in use
for several years without crashes. I cleaned it up a bit and rewrote
what was necessary for Asterisk 13.
The functions were copied from other similar languages and modified
where appropriate. If i recall correctly, the German and Danish
functions were used as a base.
ASTERISK-26087
Reported by: Örn Arnarson
Tested by: Örn Arnarson
Change-Id: Ib7d8bd7b0fede5767921ed821315b5b508c0e665
In several internal library projects, the files are archived with the help of
'ar cr'. Only the projects editline and the Objective Open H.323 stack
implementation in C (ooh323c) use 'ar cru' instead. Recently, some platforms
changed the default parameters of AR which creates "/usr/bin/ar: `u' modifier
ignored since `D' is the default (see `U')". For consistency and to avoid this
message all projects use 'ar cr' now.
ASTERISK-26091 #close
Change-Id: I710a9b1c01c1b5a1931a646098c044c8161ead40
Added a new channel variable FORWARDERNAME which indicates which
channel was responsible for a forwarding requests received on dial attempt.
Fixed a bug in the app_queue: FORWARD_CONTEXT is not used.
ASTERISK-26059 #close
Change-Id: I34e93e8c1b5e17776a77b319703c48c8ca48e7b2
If you create a local channel and don't specify an originator channel
to take capabilities from, we automatically add all audio formats to
the new channel's capabilities. When we try to make the channel
compatible with another, the "best format" functions pick the best
format available, which in this case will be slin192. While this is
great for preserving quality, it's the worst for performance and
overkill for the vast majority of applications.
In the absense of any other information, adding all formats is the
correct thing to do and it's not always possible to supply an
originator so a new parameter 'formats' has been added to the channel
create/originate functions. It's just a comma separated list of formats
to make availalble for the channel. Example: "ulaw,slin,slin16".
'formats' and 'originator' are mutually exclusive.
To facilitate determination of format names, the format name has been
added to "core show codecs".
ASTERISK-26070 #close
Change-Id: I091b23ecd41c1b4128d85028209772ee139f604b
