directmediapermit/directmediadeny support to restrict which peers can do
directmedia based on ip address. In some networks not all phones are fully
routed, i.e. not all phones can ping each other. This patch adds a way to
restrict directmedia for certain peers between certain networks.
(closes issue #16645)
Reported by: raarts
Patches:
directmediapermit.patch uploaded by raarts (license 937)
Tested by: raarts
Review: https://reviewboard.asterisk.org/r/467/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@264626 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Added the keyword 'all' to the 'channel hangup request' CLI command
so that you can request all channels to be hungup without having to
restart Asterisk.
(closes issue #16009)
Reported by: moy
Patches:
hangup-all-rev-221688.patch uploaded by moy (license 222)
Tested by: moy, russell
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@264117 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r263769 | jpeeler | 2010-05-18 13:54:58 -0500 (Tue, 18 May 2010) | 10 lines
Modify directory name reading to be interrupted with operator or pound escape.
In the case of accidentally entering the wrong first three letters for the
reading, users could be very frustrated if the name listing is very long. This
allows interrupting the reading by pressing 0 or #. 0 will attempt to execute
a configured operator (o) extension and # will exit and proceed in the
dialplan.
ABE-2200
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@263807 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch adds the following in-conference admin DTMF features:
*81 - Roll call (or simply user count if INTROUSER isn't enabled)
*82 - Eject all non-admins
*83 - Mute/unmute all non-admins
*84 - Start recording the conference on the fly
FWIW, this code uses newly recorded prompts.
(closes issue #16379)
Reported by: rfinnie
Patches:
meetme-enhancements-232771-v1.patch uploaded by rfinnie (license 940)
modified slightly by me
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@260757 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This module implements an abstraction for retrieving and exporting
asterisk data.
Developed by:
Brett Bryant <brettbryant@gmail.com>
Eliel C. Sardanons (LU1ALY) <eliels@gmail.com>
For the Google Summer of code 2009 Project.
Documentation can be found in doxygen format and inside the
header include/asterisk/data.h
Review: https://reviewboard.asterisk.org/r/275/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@258517 65c4cc65-6c06-0410-ace0-fbb531ad65f3
From Reviewboard:
CCSS stands for Call Completion Supplementary Services. An admittedly out-of-date
overview of the architecture can be found in the file doc/CCSS_architecture.pdf
in the CCSS branch. Off the top of my head, the big differences between what is
implemented and what is in the document are as follows:
1. We did not end up modifying the Hangup application at all.
2. The document states that a single call completion monitor may be used across
multiple calls to the same device. This proved to not be such a good idea
when implementing protocol-specific monitors, and so we ended up using one
monitor per-device per-call.
3. There are some configuration options which were conceived after the document
was written. These are documented in the ccss.conf.sample that is on this
review request.
For some basic understanding of terminology used throughout this code, see the
ccss.tex document that is on this review.
This implements CCBS and CCNR in several flavors.
First up is a "generic" implementation, which can work over any channel technology
provided that the channel technology can accurately report device state. Call
completion is requested using the dialplan application CallCompletionRequest and can
be canceled using CallCompletionCancel. Device state subscriptions are used in order
to monitor the state of called parties.
Next, there is a SIP-specific implementation of call completion. This method uses the
methods outlined in draft-ietf-bliss-call-completion-06 to implement call completion
using SIP signaling. There are a few things to note here:
* The agent/monitor terminology used throughout Asterisk sometimes is the reverse of
what is defined in the referenced draft.
* Implementation of the draft required support for SIP PUBLISH. I attempted to write
this in a generic-enough fashion such that if someone were to want to write PUBLISH
support for other event packages, such as dialog-state or presence, most of the effort
would be in writing callbacks specific to the event package.
* A subportion of supporting PUBLISH reception was that we had to implement a PIDF
parser. The PIDF support added is a bit minimal. I first wrote a validation
routine to ensure that the PIDF document is formatted properly. The rest of the
PIDF reading is done in-line in the call-completion-specific PUBLISH-handling
code. In other words, while there is PIDF support here, it is not in any state
where it could easily be applied to other event packages as is.
Finally, there are a variety of ISDN-related call completion protocols supported. These
were written by Richard Mudgett, and as such I can't really say much about their
implementation. There are notes in the CHANGES file that indicate the ISDN protocols
over which call completion is supported.
Review: https://reviewboard.asterisk.org/r/523
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@256528 65c4cc65-6c06-0410-ace0-fbb531ad65f3
From Review Board:
There are two interrelated changes here.
First, there is the introduction of func_srv. This adds two new read-only
dialplan functions, SRVQUERY and SRVRESULT. They work very similarly to the
ENUMQUERY and ENUMRESULT functions, except that this allows one to query SRV
records instead. In order to facilitate this work, I added a couple of new API
calls to srv.h. ast_srv_get_record_count tells the number of records returned
by an SRV lookup. This number is calculated at the time of the SRV lookup.
ast_srv_get_nth_record allows one to get a numbered SRV record.
Second, there is the modification to chan_sip that allows one to specify a
hostname or IP address (along with a port) to send an outgoing INVITE to when
dialing a SIP peer. This goes hand-in-hand with func_srv. You can query SRV
records and then use the host and port from the results to dial via a specific
host instead of what is configured in sip.conf.
Review: https://reviewboard.asterisk.org/r/608
SWP-1200
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@256485 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Previously only configurable globally. A unit test has also been written to
provide protection against parse failures for supported mailbox options.
(closes issue #16864)
Reported by: kobaz
Patches:
voicemail2.patch uploaded by kobaz (license 834)
Review: https://reviewboard.asterisk.org/r/555/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@254321 65c4cc65-6c06-0410-ace0-fbb531ad65f3
users expect them to work.
'core set debug' and 'core set verbose' can optionally change the
level for a specific filename; however, this is actually for a
specific source file name, not the module that source file is included
in. With examples like chan_sip, chan_iax2, chan_misdn and others
consisting of multiple source files, this will not lead to the
behavior that users expect. If they want to set the debug level for
chan_sip, they want it set for all of chan_sip, and not to have to
also set it for reqresp_parser and other files that comprise the
chan_sip module.
This patch changes this functionality to be module-name based instead
of file-name based.
To make this work, some Makefile modifications were required to ensure
that the AST_MODULE definition is present in each object file produced
for each module as well.
Review: https://reviewboard.asterisk.org/r/574/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@253917 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The PITCH_SHIFT function can be used on a channel to independently
modify the pitch of both rx and tx audio streams. Now you can
improve your conference calls by assigning a random pitch effect
to everyone entering a meetme room, or just make your day more
interesting by making your co-workers sound funny. These are just
some of the numerious practical uses for this function. Enjoy!
https://reviewboard.asterisk.org/r/526/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@251038 65c4cc65-6c06-0410-ace0-fbb531ad65f3
New config parameter "reportalarms" added in chan_dahdi.conf which supports the
following possible values:
"channels": report each channel alarms (current behavior, default for backward compatibility)
"spans": report an "SpanAlarm" event when the span of any configured channel is alarmed
"all": report channel and span alarms (aggregated behavior)
"none": do not report any alarms
(closes issue #16709)
Reported by: nahuelgreco
Patches:
chan_dahdi.c.reportalarms.patch uploaded by nahuelgreco (license 162)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@250392 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The 'p' option allows the PickupChan app to pickup
a ringing phone by looking for the first match to a
partial channel name rather than requiring a full match.
(closes issue #16613)
Reported by: syspert
Patches:
pickipbycallid.patch uploaded by syspert (license 938)
pickupbycallerid_v2.patch uploaded by dvossel (license 671)
Tested by: dvossel, syspert
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@250141 65c4cc65-6c06-0410-ace0-fbb531ad65f3
VMSayName that will play the recorded name of the voicemail user if it exists,
otherwise will play the mailbox number. A unit test has been written to verify
correct functionality called test_voicemail_vmsayname.
(closes issue #14973)
Reported by: ghjm
Review: https://reviewboard.asterisk.org/r/530/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@249889 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The new JabberStatus event gives a concise view of the status change to the AMI
clients. Thanks fiddur!
(closes issue #16760)
Reported by: fiddur
Patches:
244498.2.diff uploaded by fiddur (license 678)
Tested by: fiddur, phsultan
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@247500 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Current support for regex matching was previously only available on the group.
Also, error reporting for regex failures has been added. In addition to this
feature enhancement a unit test has been written to check the regular expression
logic to ensure the count operation is working as expected.
(closes issue #16642)
Reported by: kobaz
Patches:
groupmatch2.patch uploaded by kobaz (license 834)
Review: https://reviewboard.asterisk.org/r/503/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@247295 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This feature allows for parkinglots to be created dynamically within
the dialplan. Thanks to all who were involved with getting this patch
written and tested!
(closes issue #15135)
Reported by: IgorG
Patches:
features.dynamic_park.v3.diff uploaded by IgorG (license 20)
2009090400_dynamicpark.diff.txt uploaded by mvanbaak (license 7)
dynamic_parkinglot.diff uploaded by dvossel (license 671)
Tested by: eliel, IgorG, acunningham, mvanbaak, zktech
Review: https://reviewboard.asterisk.org/r/352/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@247248 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The options are: parkedcallparking, parkedcallhangup, parkedcallrecording, and
parkedcalltransfers. Previously these options were only available for the
default parking lot.
(closes issue #16641)
Reported by: bluecrow76
Patches:
asterisk-1.6.2.1-features.c.diff uploaded by bluecrow76 (license 270)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@244598 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Previously, we would parse GOSUB_RESULT, but not actually do anything with it.
Also, allow GOSUB_RETVAL to be inherited back across a peer/master channel.
(closes issue #16687)
Reported by: bklang
Patches:
app_dial-preserve-gosub_retval.patch uploaded by bklang (license 919)
(with modifications)
(closes issue #16686)
Reported by: bklang
Patches:
app_dial-respect-gosub_result.patch uploaded by bklang (license 919)
(with modifications)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@244393 65c4cc65-6c06-0410-ace0-fbb531ad65f3
In asterisk.conf, transmit_silence_during_record has been removed
in favor of using only the transmit_silence option. The
transmit_silence_during_record option remains a valid option in
asterisk.conf, but has been removed from the sample config and
noted in CHANGES.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@240971 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Part of the work done for connected line was to add an optional
argument to the 'f' option to allow for the connected party information
of the outgoing channel to be set to the argument provided. This was
overlooked during the merge of the work to trunk and is being added
back now. The CHANGES file has also been updated to note this change.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@237803 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The option is global and currently the acceptable values as noted in the sample
config are accept or deny.
(closes issue #15228)
Reported by: lp0
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@235342 65c4cc65-6c06-0410-ace0-fbb531ad65f3
New parameters ExtraContext, ExtraExtension, and ExtraPriority have been added
to redirect the second channel to a different location. Previously, it was only
possible to redirect both channels to the same place.
(closes issue #15853)
Reported by: haakon
Patches:
trunk-manager.c.patch uploaded by haakon (license 880)
Tested by: jpeeler
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@235265 65c4cc65-6c06-0410-ace0-fbb531ad65f3
As described in the CHANGES file:
* MeetMe has a new option 'G' to play an announcement before joining a
conference.
* Page has a new option 'A(x)' which will playback an announcement
simultaneously to all paged phones (and optionally excluding the caller's one
using the new option 'n') before the call is bridged.
To add the new option to meetme, the conference flag options had to be extended
to 64 bits.
(closes issue #14365)
Reported by: dferrer
Patches:
page_announce.patch uploaded by dferrer (license 525)
modified by me
Review: https://reviewboard.asterisk.org/r/188/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@234173 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This feature was listed as a 1.6.2 feature, even though it's in all 1.6.X
versions. The description of the feature was also no longer accurate.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@234008 65c4cc65-6c06-0410-ace0-fbb531ad65f3
(closes issue #16263)
Reported by: andrew
Patches:
pagerdate.patch uploaded by andrew (license 240)
(with a slight modification by me)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@232916 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Previously only possible per context, new option called imapfolder.
(closes issue #14298)
Reported by: jablko
Patches:
patch-200906202 uploaded by jablko (license 675)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@232700 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This option can be used to enable #exec support in the asterisk.conf configuration file.
(closes issue #16260)
Reported by: atis
Patches:
exec_includes.patch uploaded by atis (license 242)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@232510 65c4cc65-6c06-0410-ace0-fbb531ad65f3
* Add REPLACE function, which searches a given variable for a set of
characters and replaces each with a given character.
* Add PASSTHRU function, which passes a literal string back, like a NoOp for
functions. Intent is to be able to specify a literal string to another
function that takes a variable name as an argument.
* Let the array manipulation functions work with dialplan functions, in
addition to variables. This allows the array manipulation functions to
modify ASTDB and ODBC backends, assuming the func_odbc configuration has
both read and write functions.
(closes issue #15223)
Reported by: ajohnson
Patches:
20091112__issue15223.diff.txt uploaded by tilghman (license 14)
Tested by: lmadsen, tilghman
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@230994 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Dial(DAHDI/g1[/extension[/options]])
Current options:
K(<keypad_digits>)
R Reverse charging indication (Collect calls)
The earlier Dial(DAHDI/g1[/K<keypad_digits>][/extension] format was
variable and did not allow for the easy addition of more options.
The earlier 'C' prefix character for reverse charge indiation would
conflict with the a-d DTMF digits if ISDN uses them.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@228691 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This change causes answertime to be correct even if the called channel hangs up during an announcement triggered by the A() option.
(closes issue #15936)
Reported by: falves11
Patches:
dial-macro-billsec-fix1.diff uploaded by mnicholson (license 96)
dial-caller-answer1.diff uploaded by mnicholson (license 96)
Tested by: falves11, mnicholson
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@227897 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This change adds a configuration option to SIP peers, unsolicited_mailbox, which
configures a virtual mailbox to use for received new/old MWI information. This
virtual mailbox can then be used by any device supporting MWI.
(closes issue #13028)
Reported by: AsteriskRocks
Patches:
bug_13028_chan_sip_external_mwi_20090707.patch uploaded by cmaj (license 830)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@226060 65c4cc65-6c06-0410-ace0-fbb531ad65f3
* Added handling of received HOLD/RETRIEVE messages and the optional ability
to transfer a held call on disconnect similar to an analog phone.
* Added CallRerouting/CallDeflection support for Q.SIG, ETSI PTP, ETSI PTMP.
Will reroute/deflect an outgoing call when receive the message.
Can use the DAHDISendCallreroutingFacility to send the message for the
supported switches.
* Added ability to send/receive keypad digits in the SETUP message.
Send keypad digits in SETUP message: Dial(DAHDI/g1[/K<keypad_digits>][/extension])
Access any received keypad digits in SETUP message by: ${CHANNEL(keypad_digits)}
* Added support for BRI PTMP NT mode.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@225692 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The Telecom Specs in NZ suggests that SUB ADDRESS is always on, so doing
"desk to desk" between offices each with an asterisk box over the ISDN
should then be possible, without a whole load of DDI numbers required.
(closes issue #15604)
Reported by: alecdavis
Patches:
asterisk_subaddr_trunk.diff11.txt uploaded by alecdavis (license 585)
Some minor modificatons were made.
Tested by: alecdavis, rmudgett
Review: https://reviewboard.asterisk.org/r/405/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@225357 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This is the second commit for this and documents the text stream using the configured
IP address and fixes a bug in the original patch where the UDPTL stream would also
use the different IP address.
(closes issue #14729)
Reported by: _brent_
Patches:
media_address.patch uploaded by brent (license 388)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@225089 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Ability has been added to both manager command SIPnotify as well as console
command sip notify. Message body is stored in the "Content" variable. An
example is present in sip_notify.conf.
(closes issue #13926)
Reported by: jthurman
Patches:
sip-notify-svn189463.diff uploaded by gareth (license 208)
Tested by: gareth
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@224035 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The PRI channels can no longer change the channel name if a different B
channel is selected during call negotiation. To prevent using the channel
name to infer what B channel a call is using and to avoid name collisions,
the channel name format is changed.
The new channel naming for PRI channels is:
DAHDI/ISDN-<span>-<sequence-number>
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@221701 65c4cc65-6c06-0410-ace0-fbb531ad65f3
JABBER_RECEIVE (along with JabberSend) makes Asterisk interact with users over
XMPP to process calls.
SendText can be used instead of JabberSend in the context of XMPP based voice
channels (chan_gtalk and chan_jingle).
(closes issue #12569)
Reported by: eech55
Tested by: phsultan, asannucci, lmadsen, jtodd, maxgo
Review: https://reviewboard.asterisk.org/r/88/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@220457 65c4cc65-6c06-0410-ace0-fbb531ad65f3
In addition, there's a bit of cleanup to the arguments and documentation, in which
I discovered that the last feature added to this application duplicated an option
(oops!) and changed that option so that it now works.
(closes issue #14909)
Reported by: junky
Patches:
__20090901-spy_hangup_trunk.diff uploaded by lmadsen (license 10)
Tested by: amilcar, junky, flujan, lmadsen
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@219105 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Added DYNAMIC_FEATURENAME which holds the last triggered dynamic feature.
Added DYNAMIC_PEERNAME which holds the unique channel name on the other side
and is set when a dynamic feature is triggered.
(closes issue #14663)
Reported by: tamiel
Patches:
20090313_features.diff uploaded by tamiel (license 712)
Tested by: tamiel
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@214309 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Add Connected Line Presentation (COLP) support to chan_dahdi/libpri as an
addition to issue 8824. This is the chan_dahdi/sig_pri portion. COLP
support is now available for any switch for which libpri supports COLP
(currently ETSI PTP, ETSI PTMP, and Q.SIG) with this patch.
(closes issue #14068)
Tested by: rmudgett
Review: https://reviewboard.asterisk.org/r/340/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@213007 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/be/branches/C.2-...
..........
r207316 | rmudgett | 2009-07-17 23:05:05 -0500 (Fri, 17 Jul 2009) | 20 lines
Fixed incoming calls being matched to MSNs without type-of-number prefix added.
For an incoming ISDN call the dialed.number is incorrectly matched against
the configured MSNs in misdn.conf. The numbers passed to the dialplan
include the configured prefix for the dialed.number_type, whereas the
check against the configured MSNs (to decide if the call is accepted at
all), is executed without the configured prefix.
e.g., dialed.number = 241168020, TON = national, configured national
prefix is "0". (This is the TON which is used by ISDN providers in the
Netherlands.)
In chan_misdn.c:cb_events() in case EVENT_SETUP the call to
misdn_cfg_is_msn_valid() uses the unnormalized number 241168020, but 57
lines later the call to read_config() adds the prefix, and the
dialed.number is now 0241168020, which is then used in the dialplan.
misdn_cfg_is_msn_valid() must use the normalized number, too.
JIRA ABE-1912
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@207318 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This is a continuation of revision 885 to LibPRI (Capture and expose the Reverse
Charging Indication IE on ISDN PRI) which added the ability to get/set Reverse
Charging Indication in LibPRI. This patch adds the ability to specify RCI on
the outbound leg of a PRI call from within Asterisk, by prefixing the dialed
number with a capital 'C' like:
...,Dial(DAHDI/g1/C4445556666)
And to read it off an inbound channel:
exten => s,1,Set(RCI=${CHANNEL(reversecharge)})
Thanks again to rmudgett for the thorough review.
(closes issue #13760)
Reported by: mrgabu
Review: https://reviewboard.asterisk.org/r/303/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@204749 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The original patch for this was written by Brett Bryant, and I split it out into
it's own module.
(closes issue #12876)
Reported by: bbryant
Patches:
06162008_cdr_custom_syslog.diff uploaded by bbryant (license 36)
05212009_cdr_syslog.patch uploaded by seanbright (license 71)
Tested by: seanbright
Review: https://reviewboard.asterisk.org/r/297/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@203846 65c4cc65-6c06-0410-ace0-fbb531ad65f3
CEL is the new system for logging channel events. This was inspired after
facing many problems trying to represent what is possible to happen to a call
in Asterisk using CDR records. For more information on CEL, see the built in
HTML or PDF documentation generated from the files in doc/tex/.
Many thanks to Steve Murphy (murf) and Brian Degenhardt (bmd) for their hard
work developing this code. Also, thanks to Matt Nicholson (mnicholson) and
Sean Bright (seanbright) for their assistance in the final push to get this
code ready for Asterisk trunk.
Review: https://reviewboard.asterisk.org/r/239/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@203638 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Terry Wilson
Leif Madsen
Jeff Peeler
David Vossel
Paul Belanger
Mark Michelson
Eliel C. Sardanons
Julian Lyndon-Smith
Jared Smith
Kevin P. Fleming
Matthew Nicholson
Philippe Sultan
TransNexus OSP Development
Tilghman Lesher
Alec L Davis
Russell Bryant
Joshua Colp
Olle Johansson
Richard Mudgett
Sean Bright