This work is done by lmadsen, junky and mvanbaak
during AstriDevCon.
This is the second audit the CLI got, and
this time lmadsen made sure he had _ALL_ modules
loaded that have CLI commands in them.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@145121 65c4cc65-6c06-0410-ace0-fbb531ad65f3
when a file is invalid from when a file is missing. This is most important when
we have two configuration files. Consider the following example:
Old system:
sip.conf users.conf Old result New result
======== ========== ========== ==========
Missing Missing SIP doesn't load SIP doesn't load
Missing OK SIP doesn't load SIP doesn't load
Missing Invalid SIP doesn't load SIP doesn't load
OK Missing SIP loads SIP loads
OK OK SIP loads SIP loads
OK Invalid SIP loads incompletely SIP doesn't load
Invalid Missing SIP doesn't load SIP doesn't load
Invalid OK SIP doesn't load SIP doesn't load
Invalid Invalid SIP doesn't load SIP doesn't load
So in the case when users.conf doesn't load because there's a typo that
disrupts the syntax, we may only partially load users, instead of failing with
an error, which may cause some calls not to get processed. Worse yet, the old
system would do this with no indication that anything was even wrong.
(closes issue #10690)
Reported by: dtyoo
Patches:
20080716__bug10690.diff.txt uploaded by Corydon76 (license 14)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@142992 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r141094 | murf | 2008-09-04 17:15:07 -0600 (Thu, 04 Sep 2008) | 70 lines
(closes issue #13357)
Reported by: pj
Tested by: murf
(closes issue #13416)
Reported by: yarns
Tested by: murf
If you find this message overly verbose, relax, it's probably
not meant for you. This message is meant for probably only
two people in the whole world: me, or the poor schnook that
has to maintain this code because I'm either dead or unavailable
at the moment.
This fix solves two reports, both having to do with embedding
a function call in a ${} construct. It was tricky because the
funccall syntax has parenthesis () in it. And up till now,
the 'word' token in the flex stuff didn't allow that, because
it would tend to steal the LP and RP tokens. To be truthful,
the "word" token was the trickiest, most unstable thing in
the whole lexer. I was lucky it made this long without complaints.
I had to choose every character in the pattern with extreme
care, and I knew that someday I'd have to revisit it. Well,
the day has come.
So, my brilliant idea (and I'm being modest), was to use the
surrounding ${} construct to make a state machine and capture
everything in it, no matter what it contains. But, I have to now
treat the word token like I did with comments, in that I turn
the whole thing into a state-machine sort of spec, with new
contexts "curlystate", "wordstate", and "brackstate".
Wait a minute, "brackstate"? Yes, well, it didn't take very many
regression tests to point out if I do this for ${} constructs,
I also have to do it with the $[] constructs, too.
I had to create a separate pcbstack2 and pcbstack3 because
these constructs can occur inside macro argument lists, and
when we have two state machines operating on the same structures
we'd get problems otherwise. I guess I could have stopped at
pcbstack2 and had the brackstate stuff share it, but it doesn't
hurt to be safe. So, the pcbpush and pcbpop routines also now
have versions for "2" and "3".
I had to add the {KEYWORD} construct to the initial pattern for
"word", because previously word would match stuff like "default7",
because it was a longer match than the keyword "default". But,
not any more, because the word pattern only matches only one or
two characters now, and it will always lose. So, I made it the
winner again by making an optional match on any of the keywords
before it's normal pattern.
I added another regression test to make sure we don't
lose this in future edits, and had to fix just one regression,
where it no longer reports a 'cascaded' error, which I guess
is a plus.
I've given some thought as to whether to apply these fixes to
1.4 and the 1.6.x releases, vs trunk; I decided to put it in
1.4 because one of the bug reports was against 1.4; and it
is unexpected that AEL cannot handle this situation. It actually
reduced the amount of useless "cascade" error messages that
appeared in the regressions (by one line, ehhem). There is
a possible side-effect in that it does now do more careful
checking of what's in those ${} constructs, as far as matching
parens, and brackets are concerned. Some users may find a an
insidious problem and correct it this way. This should be
exceedingly rare, I hope.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@141115 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r141028 | jpeeler | 2008-09-04 12:00:29 -0500 (Thu, 04 Sep 2008) | 7 lines
(closes issue #11979)
Fixes multiple parking problems:
Crash when executing a park on an extension dialed by AGI due to not returning the proper return code.
Crash when using a builtin feature that was a subset of a enabled dynamic feature.
Crash due to always hanging up the peer despite the fact that the peer was supposed to be parked.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@141039 65c4cc65-6c06-0410-ace0-fbb531ad65f3
of changes to the Set and MSet apps, so people aren't
so shocked and surprised when they upgrade from
1.4 to 1.6.
Also, for the sake of those upgrading from 1.4 to
1.6 with AEL, I provide automatic support for the
"old" way of using Set(), that still does the
exact same old thing with quotes and backslashes
and so on as 1.4 did, by having AEL compile in the
use of MSet() instead of Set(), everywhere it inserts
this code.
But, if the app_set var is set to 1.6 or higher,
it uses the "new", non-evaluative Set().
This only usually happens if the user manually
inserts this into the asterisk.conf file, or runs
the "make samples" command.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@140824 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r140488 | mmichelson | 2008-08-29 12:34:17 -0500 (Fri, 29 Aug 2008) | 22 lines
After working on the ao2_containers branch, I noticed
something a bit strange. In all cases where we provide
a callback function to ao2_container_alloc, the callback
function would only return 0 or CMP_MATCH. After inspecting
the ao2_callback() code carefully, I found that if you're
only looking for one specific item, then you should return
CMP_MATCH | CMP_STOP. Otherwise, astobj2 will continue
traversing the current bucket until the end searching for
more matches.
In cases like chan_iax2 where in 1.4, all the peers are
shoved into a single bucket, this makes for potentially
terrible performance since the entire bucket will be
traversed even if the peer is one of the first ones come
across in the bucket.
All the changes I have made were for cases where the
callback function defined was passed to ao2_container_alloc
so that calls to ao2_find could find a unique instance
of whatever object was being stored in the container.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@140489 65c4cc65-6c06-0410-ace0-fbb531ad65f3
to the Set app in trunk/1.6.x, as they come from the 1.4 world. They are only bitten if
they write their AEL dialplan in the 1.4 world, and then carry it over to a trunk/1.6.x
installation where a "make samples" was executed, or where they hand-edited the
asterisk.conf file and added the [compat] category with app_set = 1.6 (or higher).
(this commit does not totally solve 13249, at least not yet)
The change involves issueing a single warning while the AEL file is loading, if:
1. app_set is present in the config file, and set to 1.6 or higher.
2. there are double quotes in an assignment statement (eg x = "hi there";)
3. the warning was not already issued.
The standalone app, aelparse, does not (yet) issue this warning. I'd have to
have it read in the asterisk.conf file, and that's a bit of hassle. I'll add
it if users request it, tho.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@138815 65c4cc65-6c06-0410-ace0-fbb531ad65f3
an OOB message that answers the question of, if AGI no longer shuts down the
connection on hangup, how will FastAGI know when to stop processing the call?
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@136859 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r136726 | murf | 2008-08-07 18:15:34 -0600 (Thu, 07 Aug 2008) | 32 lines
(closes issue #13236)
Reported by: korihor
Wow, this one was a challenge!
I regrouped and ran a new strategy for
setting the ~~MACRO~~ value; I set it once
per extension, up near the top. It is only
set if there is a switch in the extension.
So, I had to put in a chunk of code to detect
a switch in the pval tree.
I moved the code to insert the set of ~~exten~~
up to the beginning of the gen_prios routine,
instead of down in the switch code.
I learned that I have to push the detection
of the switches down into the code, so everywhere
I create a new exten in gen_prios, I make sure
to pass onto it the values of the mother_exten
first, and the exten next.
I had to add a couple fields to the exten
struct to accomplish this, in the ael_structs.h
file. The checked field makes it so we don't
repeat the switch search if it's been done.
I also updated the regressions.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@136746 65c4cc65-6c06-0410-ace0-fbb531ad65f3
- Changing debug messages from VERBOSE to DEBUG channel
- Adding a few todo's
- Adding a few more "XMPP"'s to compliment Jabber...
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@136005 65c4cc65-6c06-0410-ace0-fbb531ad65f3
1) If a function returns SQLITE_LOCKED, no recovery is possible.
2) An error message can be allocated, even when no error is signalled.
(closes issue #13109)
Reported by: gknispel_proformatique
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@134919 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r131242 | murf | 2008-07-16 11:53:43 -0600 (Wed, 16 Jul 2008) | 19 lines
(closes issue #13090)
Reported by: murf
The problem was that, esoteric as it is, because the hangerupper
context immediately preceded the std-priv-extent macro, that
the checking code accidentally would fall from traversing hangerupper
into the std-priv-exten macro, where it would hit the hangerupper
in the 'includes', and proceed into an infinite recursion.
A small fix to traverse into the statements of the context instead
of the context solves this issue.
I also added some commented out printfs for debug, which were pretty
handy in the face of a dorky gdb.
This was a problem around since the package was first written;
but evidently pretty rare in turning up in the field.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@131243 65c4cc65-6c06-0410-ace0-fbb531ad65f3
released, causing a deadlock. (Reported by mvanbaak in #asterisk-dev,
discovered by bbryant's change to the lock tracking code to yell at you
if a thread exits with a lock still held)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@131072 65c4cc65-6c06-0410-ace0-fbb531ad65f3
To make sure nobody commits script-modified files we first make a backup
of asterisk.tex, run the script, generate the pdf and / or html,
and put the original asterisk.tex back.
This will guard us for the stuff that happened before that someone committed
a locally modified asterisk.tex, with changes done by this script.
(closes issue #13062)
Reported by: mvanbaak
Patches:
sed_without-i-v3.diff uploaded by mvanbaak (license 7)
Tested by: mvanbaak
Feedback from Corydon. Thanks for taking the time to go through this.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@130578 65c4cc65-6c06-0410-ace0-fbb531ad65f3
AMI commands can display that a channel is under control of an AGI.
Work inspired by work at customer site, but paid for by Edvina AB
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@128240 65c4cc65-6c06-0410-ace0-fbb531ad65f3
- change ast_settimeout() to honor max rate in edge cases of file playback
(this will make some warning messages go away at the end of playing back
a file)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@125332 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r125132 | kpfleming | 2008-06-25 17:21:30 -0500 (Wed, 25 Jun 2008) | 10 lines
allow tonezone to live in a different place than DAHDI/Zaptel, since dahdi-tools and dahdi-linux are now separate packages and can be installed in different places
don't include tonezone.h in dahdi_compat.h, because only a couple of modules need it
get app_rpt building again after the DAHDI changes
(closes issue #12911)
Reported by: tzafrir
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@125138 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Tilghman Lesher
Michiel van Baak
Doug Bailey
Philippe Sultan
Steve Murphy
Jeff Peeler
Russell Bryant
Mark Michelson
Sean Bright
Olle Johansson
Kevin P. Fleming
Terry Wilson
Brett Bryant