https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r327211 | rmudgett | 2011-07-08 16:41:58 -0500 (Fri, 08 Jul 2011) | 9 lines
INVITE 403 Forbidden response always retransmits the maximum times.
Asterisk sends a 403 Forbidden response if authentication fails for an
INVITE as required. However, it ignores the ACK and keeps retransmitting
the response.
* Made not delete the to-tag in the dialog so the expected ACK can be
matched with the dialog and stop the retransmissions.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@327212 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch adds pass-through support for CELT. CELT
formats are defined in codecs.conf and can be configured
to any sample rate a CELT endpoint supports. This patch also
addresses a crash in channel.c resulting from a frame list being
freed incorrectly. This crash was discovered while testing a CELT
translator which had to split encoded audio into multiple frames.
The codec translator is not a part of this patch, but may be
contributed in the future.
Review: https://reviewboard.asterisk.org/r/1294/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@326855 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r326411 | tilghman | 2011-07-05 17:08:29 -0500 (Tue, 05 Jul 2011) | 14 lines
Add the attribute "type" to each "<use>" for menuselect.
This matters only when autoconf fails to detect that weak linking is supported.
External optional dependencies will become optional in both cases, as they are
removed at compile time when not detected. However, runtime-optional modules
are made mandatory when weak linking is not found. This change affects only
the external optional dependencies; previously, they were incorrectly required
when weak linking support was not detected.
Patches:
20110702__issue18062__asterisk_trunk.diff.txt by tilghman (License #5003)
Tested by: iasgoscouk
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@326412 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r326291 | rmudgett | 2011-07-05 12:22:59 -0500 (Tue, 05 Jul 2011) | 23 lines
Used auth= parameter freed during "sip reload" causes crash.
If you use the auth= parameter and do a "sip reload" while there is an
ongoing call. The peer->auth data points to free'd memory.
The patch does several things:
1) Puts the authentication list into an ao2 object for reference counting
to fix the reported crash during a SIP reload.
2) Converts the authentication list from open coding to AST list macros.
3) Adds display of the global authentication list in "sip show settings".
(closes issue ASTERISK-17939)
Reported by: wdoekes
Patches:
jira_asterisk_17939_v1.8.patch (license #5621) patch uploaded by rmudgett
Review: https://reviewboard.asterisk.org/r/1303/
JIRA SWP-3526
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@326321 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r326144 | rmudgett | 2011-07-01 16:07:22 -0500 (Fri, 01 Jul 2011) | 16 lines
Better way to get chan and pvt lock for issue ASTERISK-17431.
Redoes -r308945 for issue ASTERISK-17431 deadlock fix for
sip_set_udptl_peer() and sip_set_rtp_peer().
* Lock the channels in the defined order and avoid the need for a deadlock
avoidance loop.
* Lock the channel before getting the pointer to the private structure to
be sure that the pointer will not change due to a masquerade or channel
hangup.
* To preserve sanity, check that chan and p->owner are the same. (Pointer
rearangements should not happen without the protection of locks because
bad things tend to happen otherwise.)
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@326145 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r325935 | rmudgett | 2011-06-30 15:39:45 -0500 (Thu, 30 Jun 2011) | 11 lines
Misc minor changes in chan_sip.
* Add load failure exit if primary SIP container(s) could not get created
in chan_sip.c:load_module().
* Removed a redundant static prototype.
* Some typos.
* Some whitespace.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@325936 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r325212 | rmudgett | 2011-06-28 12:30:16 -0500 (Tue, 28 Jun 2011) | 7 lines
Use the device name and not the channel name to initialize the device state.
Correct ASTERISK-11323 implementation as I don't see how it ever worked as
claimed when it used the channel name and not the device name.
(issue ASTERISK-11323)
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@325213 65c4cc65-6c06-0410-ace0-fbb531ad65f3
If a SDP does not modify the session, we ignore it. However, we were defaulting
no text and video support to true before checking to see if the sdp modified
anything or not. This would result in process_sdp ignoring an sdp but removing
video and text from the call during direct media reinvites.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@325151 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r324914 | rmudgett | 2011-06-27 10:37:19 -0500 (Mon, 27 Jun 2011) | 21 lines
When subscribing MWI to an unsolicited mailbox the first notification is incorrect.
A remote peer subscribed to MWI with the unsolicited option and a local
phone subscribed to the remote mailbox. The notify message-summary events
are sent correctly except for the first one when subscribing, which will
always be 0. This means the phone MWI indicator will be wrong until the
mailbox read/unread count changes and the event is fired.
Looks like this is a regression from ASTERISK-16149.
* Fix the logic to check the cache and if allowed then fallback to
manually counting mailbox messages.
(closes issue ASTERISK-17997)
Reported by: rsw686
Patches:
jira_asterisk_17997_v1.8.patch (license #5621) uploaded by rmudgett
Tested by: rsw686
JIRA SWP-3551
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@324915 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r324484 | twilson | 2011-06-22 13:52:04 -0500 (Wed, 22 Jun 2011) | 20 lines
Stop sending IPv6 link-local scope-ids in SIP messages
The idea behind the patch listed below was used, but in a more targeted manner.
There are now address stringification functions for addresses that are meant to
be sent to a remote party. Link-local scope-ids only make sense on the machine
from which they originate and so are stripped in the new functions.
There is also a host sanitization function added to chan_sip which is used
for when peer and dialog tohost fields or sip_registry hostnames are used to
craft a SIP message.
Also added are some basic unit tests for netsock2 address parsing.
(closes issue ASTERISK-17711)
Reported by: ch_djalel
Patches:
asterisk-1.8.3.2-ipv6_ll_scope.patch uploaded by ch_djalel (license 1251)
Review: https://reviewboard.asterisk.org/r/1278/
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@324487 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
Also fixed a reference leak in an error path in sip_msg_send().
........
r324481 | rmudgett | 2011-06-22 13:41:20 -0500 (Wed, 22 Jun 2011) | 19 lines
Timout or error on INFO or MESSAGE transaction causes call to be lost.
When exchanging INFO messages within a call, 4xx error causes the call to
be disconnected although RFC 2976 explicitly states that such transactions
do not modify the state of the dialog.
When exchanging MESSAGE messages within a call, 4xx error causes the call
to be disconnected. To provide least surprise, we should not disconnect
the call since a MESSAGE is like INFO in this case. (Implied by RFC 3428
Section 2)
(closes issue ASTERISK-17901)
Reported by: neutrino88
Review: https://reviewboard.asterisk.org/r/1257/
Review: https://reviewboard.asterisk.org/r/1258/
JIRA SWP-3486
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@324482 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r324237 | twilson | 2011-06-20 12:33:07 -0500 (Mon, 20 Jun 2011) | 12 lines
Ignore media offers with a port of 0
Section 5.1 of RFC3264 states:
A port number of zero in the offer indicates that the stream is offered
but MUST NOT be used.
(closes issue ASTERISK-17845)
Reported by: jacco
Patches:
issue19281_2.patch uploaded by jacco (license 1277)
Tested by: jacco, twilson
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@324238 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r323371 | jrose | 2011-06-14 11:38:43 -0500 (Tue, 14 Jun 2011) | 12 lines
Changes contact use in build_peer to use the FORCE_RPORT flag instead of RPORT_PRESENT
It turned out that this was causing NAT=Yes to always use rport when present which was
against 1.6.2 behavior and the check itself was redundant since the only way this
segment of code could be reached was if RPORT_PRESENT was already evaluated as true
earlier.
(closes issue ASTERISK-17789)
Reported by: byronclark
Patches:
use_sip_nat_force_rport.patch uploaded by byronclark (license 1200)
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@323372 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Autoanswer added to skinny based on incoming chan var SKINNY_AUTOANSWER.
Initial value must be the time to autoanswer in ms, then optionally :BEEP
to play a tone when answered and :MUTE to mute the mic when answering.
eg 3000:MUTE:BEEP will ring for 3 secs, then answer, mute the mic, and
play a beep. just 3000 would answer afer 3 secs of ringing with no
beep and full two way audio.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@322544 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The do_monitor seemed to be there for task scheduling and network monitoring. However, the network monitoring has a dedicated thread so the ast_io_wait was basically just a usleep as it didn't actually seem to be monitoring anything.
Review: https://reviewboard.asterisk.org/r/1256/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@322381 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r322322 | irroot | 2011-06-08 08:18:38 +0200 (Wed, 08 Jun 2011) | 18 lines
Make handle_request_publish do dialog expiration and destruction.
This patch fixes handle_request_publish so that it does dialog expiration and destruction.
Without this patch the incoming PUBLISH requests will get stuck in the dialog list.
Restarting asterisk is the only way to remove them.
Personal observation on one system the server hung up while looping through the channels
rendering asterisk unusable and all sip phones unregisterd when they try reregister
more requests are added.
(closes issue #18898)
Reported by: gareth
Tested by: loloski, Chainsaw, wimpy, se, kuj, irroot
Jira: https://issues.asterisk.org/jira/browse/ASTERISK-17915
Review: https://reviewboard.asterisk.org/r/1253
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@322323 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Don't send all messages to 's'. Get the destination from the request URI.
(Found using automated test cases).
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@321617 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Asterisk now has protocol independent support for processing text messages
outside of a call. Messages are routed through the Asterisk dialplan.
SIP MESSAGE and XMPP are currently supported. There are options in sip.conf
and jabber.conf that enable these features.
There is a new application, MessageSend(). There are two new functions,
MESSAGE() and MESSAGE_DATA(). Documentation will be available on
the project wiki, wiki.asterisk.org.
Thanks to Terry Wilson for the assistance with development and to David Vossel
for helping with some additional testing.
Review: https://reviewboard.asterisk.org/r/1042/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@321546 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r321155 | markm | 2011-05-26 17:48:45 -0400 (Thu, 26 May 2011) | 10 lines
Fixed build problem with dev mode enabled, which was caused by commit 321100. Reformulated patch to be more generic.
Moved the sip uri parse variable initalization to parse_uri_full in reqresp_parser.c. This will ensure that any use of parse uri will have null output variables if the parse fails.
(closes issue #19346)
Reported by: kobaz
Tested by: kobaz,JonathanRose
Review: [full review board URL with trailing slash]
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@321156 65c4cc65-6c06-0410-ace0-fbb531ad65f3
