When acting as a T.38 fax gateway, res_fax_spandsp would at times cause a crash
in libspandsp. This would occur when, during fax tone detection, a ulaw/alaw
frame would be passed to modem_connect_tones_rx. That particular routine
expects the data to be in slin format. This patch looks at the frame type and,
if the data is ulaw/alaw, converts the format to slin before passing it to
modem_connect_tones_rx.
Review: https://reviewboard.asterisk.org/r/3296
(closes issue ASTERISK-20149)
Reported by: Alexandr Gordeev
Tested by: Michal Rybarik
patches:
spandsp_g711decode.diff uploaded by Michal Rybarik (license 6578)
........
Merged revisions 409990 from http://svn.asterisk.org/svn/asterisk/branches/11
........
Merged revisions 409991 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@409996 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Several fixes for the WebSockets implementation in res/res_http_websocket.c
* Flush the websocket session FILE* as fwrite() may not actually guarantee sending
the data to the network. If we do not flush, it seems that buffering on the SSL
socket for outbound messages causes issues
* Refactored ast_websocket_read to take into account that SSL file descriptors
may be ready to read via fread() but poll() will not actually say so because
the data was already read from the network buffers and is now in the libc buffers
(closes issue ASTERISK-23099)
(closes issue ASTERISK-21930)
Review: https://reviewboard.asterisk.org/r/3248/
........
Merged revisions 409681 from http://svn.asterisk.org/svn/asterisk/branches/11
........
Merged revisions 409697 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@409831 65c4cc65-6c06-0410-ace0-fbb531ad65f3
........
r409129 | jrose | 2014-02-27 13:19:02 -0600 (Thu, 27 Feb 2014) | 15 lines
res_rtp_asterisk: Fix checklist creating problems in ICE sessions
Prior to this patch, local candidate lists including SRFLX would fail to start
properly when building ICE candidate check lists. This patch fixes that problem
by making sure that each SRFLX candidate is associated with the proper
base address so that the check list can create matches properly.
This patch was written by jcolp. The issue will be left open to await testing
by the issue participants.
(issue ASTERISK-23213)
Reported by: Andrea Suisani
Review: https://reviewboard.asterisk.org/r/3256/
........
r409130 | jrose | 2014-02-27 13:38:10 -0600 (Thu, 27 Feb 2014) | 8 lines
res_rtp_asterisk: correct build error from r409129
Accidentally placed a declaration below functional code
(issue ASTERISK-23213)
Reported by: Andrea Suisani
Review: https://reviewboard.asterisk.org/r/3256/
........
Merged revisions 409129-409130 from http://svn.asterisk.org/svn/asterisk/branches/11
........
Merged revisions 409131 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@409132 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The setting 'use_ptime' is supposed to tell Asterisk to honour the ptime
attribute in an offer, preferring it to whatever packetization
preferences have been set internally. Currently, however, something
rather quirky will happen:
(1) The SDP answer will be constructed in create_outgoing_sdp_stream.
This will use the preferences from the endpoint, such that the 200 OK
response will add the packetization preferences from the endpoint, and
not what was offered.
(2) When the 200 response is issued, apply_negotiated_sdp_stream is called.
This will call apply_packetization, which will use the ptime attribute
from the offer internally.
We end up telling the offerer to use the internal ptime attribute, but we end
up using the offered ptime attribute. Hilarity ensues.
This patch modifies the behaviour by calling apply_packetization from
negotiate_incoming_sdp_stream, which is called prior to
create_outgoing_sdp_stream. This causes the format preferences on the
session's media object to be set to the inbound ptime value (if 'use_ptime'
is enabled), such that the construction of the answer gets the right value
immediately.
Review: https://reviewboard.asterisk.org/r/3244/
........
Merged revisions 408999 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@409000 65c4cc65-6c06-0410-ace0-fbb531ad65f3
It is currently possible for an ast_sip_session to exist without an
associated channel as is the case when a new invite is coming in or
just after a hangup is issued on a chan_pjsip channel. Part of the
attended transfer code assumed the channel would be non-NULL and used
it as such causing a crash. This bug was exposed thanks to the attended
transfer ARI test in the test suite.
(closes issue ASTERISK-23287)
Reported by: Matt Jordan
........
Merged revisions 408941 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@408942 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Added the ability for transferring directly to voicemail on digium phones.
Added a new module that checks for the presence of a custom header and/or
diversion header within a sip REFER. If either is found and they specify
a sending to voicemail action then variables are added to the channel
allowing the user access to them in the dialplan. Dialplan can then be
written that branches based upon these values allowing, for instace, for
a single number to be used for dialing and/or accessing voicemail directly.
Also fixed a problem where the PJSIP_HEADER function was allowing non pjsip
channels through (checked to make sure it has the correct channel type before
proceeding).
Review: https://reviewboard.asterisk.org/r/3245/
........
Merged revisions 408880 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@408881 65c4cc65-6c06-0410-ace0-fbb531ad65f3
* Fixed off-nominal json ref counting issue with using the following API
calls: ast_json_object_set() and ast_json_array_append().
* Fixed off-nominal error reporting in ast_ari_endpoints_list().
* Fixed some miscellaneous off-nominal json ref counting issues in
report_receive_fax_status() and dial_to_json().
........
Merged revisions 408713 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@408714 65c4cc65-6c06-0410-ace0-fbb531ad65f3
In order to retrieve an arbitrary sorcery instance from a dialplan function
(or any place else) there needs to be a registry of sorcery instances.
ast_sorcery_init now creates a hashtab as a registry.
ast_sorcery_open now checks the hashtab for an existing sorcery instance
matching the caller's module name. If it finds one, it bumps the
refcount and returns it. If not, it creates a new sorcery instance,
adds it to the hashtab, then returns it.
ast_sorcery_retrieve_by_module_name is a new function that does a hashtab
lookup by module name. It can be called by the future dialplan function.
res_pjsip/config_system needed a small change to share the main res_pjsip
sorcery instance.
tests/test_sorcery was updated to include a test for the registry.
(closes issue ASTERISK-22537)
Review: http://reviewboard.asterisk.org/r/3184/
........
Merged revisions 408518 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@408519 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When 'use_avpf' is set to True, inbound offers must use the AVPF/SAVPF RTP
profile. However, when 'use_avpf' is set to False, Asterisk will accept
both AVP/SAVP or AVPF/SAVPF RTP profiles in inbound offers. The documentation
previously implied that Asterisk would reject AVPF/SAVPF if 'use_avpf' was
set to False and a UA offered said profile in an INVITE request.
........
Merged revisions 408502 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@408503 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The sorcery astDB wizzard does not handle regex correctly if the pattern
begins with an anchor character.
This patch attempts to convert the anchored regex pattern to a prefix
pattern supported by astDB for performance reasons. If it is not able to
convert the pattern it falls back to getting all astDB members of the
family and doing a normal regex pattern matching on the retrieved records.
Review: https://reviewboard.asterisk.org/r/3161/
........
Merged revisions 408385 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@408386 65c4cc65-6c06-0410-ace0-fbb531ad65f3
If an AOR has no permanent contacts, then the
permanent_contacts container is never allocated.
This makes the code safe in the face of NULLs.
I also changed the variable that counts contacts
from "num" to "total_contacts" since there are now
two variables that are indicate numbers of things.
........
Merged revisions 407988 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@407990 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch tweaks the behaviour of POST /channels with channel variables such
that the variables are passed into the pbx.c routines that perform the
origination. This allows the variables to be assigned to the newly created
channels immediately upon their construction, as opposed to be assigned after
the originate has completed.
The upshot of this is that the variables are available on the channels if
they execute in the dialplan, as opposed to only being available once the
channels are answered.
Review: https://reviewboard.asterisk.org/r/3183/
........
Merged revisions 407937 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@407940 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This change allows timing implementation data to be stored directly
on the timer itself thus removing the requirement for many
implementations to do a container lookup for the same information.
This means that API calls into timing implementations can directly
access the information they need instead of having to find it.
Review: https://reviewboard.asterisk.org/r/3175/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@407749 65c4cc65-6c06-0410-ace0-fbb531ad65f3
* Adds identify, transport, and registration support to the PJSIP CLI.
* Creates three additional callbacks, one for an iterator, one for a
comparator, and one for a container. This eliminates the link dependency
from higher level modules to lower level ones.
* Eliminates duplicate sorting in PJSIP CLI commands.
* Cleans up PJSIP CLI output formatting.
* Pushes CLI command registration down to the implementing source file.
* Adds several ast_sip_destroy_sorcery functions to complement existing
ast_sip_sorcery_initialize functions. The destroy functions unregister
PJSIP CLI commands and PJSIP CLI formatters.
Reported by: George Joseph
Review: https://reviewboard.asterisk.org/r/3104/
........
Merged revisions 407568 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@407573 65c4cc65-6c06-0410-ace0-fbb531ad65f3
If the global section was not specified in pjsip.conf then the configuration
object does not exist in sorcery so when retrieving "debug" option it would
return NULL. Then the NULL result was passed to ast_false utils function
which would return false because it wasn't set to some representation of
false, thus enabling sip debug logging. Made it so if the global config object
does not exist then it will return a default of "no" for sip debugging.
(issue ASTERISK-23038)
Reported by: Rusty Newton
........
Merged revisions 407442 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@407443 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The code assumed that unregistering the alias would always succeed while in
practice this is not actually true. A common case is the "reload" command itself.
If the cli_aliases.conf configuration file was changed and reload executed the
command would fail to unregister and ultimately point to freed memory.
The reload process now checks whether unregistering succeeded or not and if not
the old CLI alias is retained.
(closes issue ASTERISK-19773)
Reported by: Joel Vandal
(closes issue ASTERISK-22757)
Reported by: Gareth Blades
........
Merged revisions 407205 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 407210 from http://svn.asterisk.org/svn/asterisk/branches/11
........
Merged revisions 407213 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@407217 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When the PJSIP pubsub framework was created, subscription handlers were required
to state what event they handled along with what body types they knew how to
generate. While this serves well when implementing a base RFC, it has problems
when trying to extend the body to support non-standard or proprietary body
elements. The code also was NOTIFY-specific, meaning that when the time comes
that we start writing code to send out PUBLISH requests with MWI or presence
bodies, we would likely find ourselves duplicating code that had previously been
written.
This changeset introduces the concept of body generators and body supplements. A
body generator is responsible for allocating a native structure for a given body
type, providing the primary body content, converting the native structure to a
string, and deallocating resources. A body supplement takes the primary body
content (the native structure, not a string) generated by the body generator and
adds nonstandard elements to the body. With these elements living in their own
module, it becomes easy to extend our support for body types and to re-use
resources when sending a PUBLISH request.
Body generators and body supplements register themselves with the pubsub core,
similar to how subscription and publish handlers had done. Now, subscription
handlers do not need to know what type of body content they generate, but they
still need to inform the pubsub core about what the default body type for a
given event package is. The pubsub core keeps track of what body generators and
body supplements have been registered. When a SUBSCRIBE arrives, the pubsub core
will check that there is a subscription handler for the event in the SUBSCRIBE,
then it will check that there is a body generator that can provide the content
specified in the Accept header(s).
Because of the nature of body generators and supplements, it means
res_pjsip_exten_state and res_pjsip_mwi have been completely gutted. They no
longer worry about body types, instead calling
ast_sip_pubsub_generate_body_content() when they need to generate a NOTIFY body.
Review: https://reviewboard.asterisk.org/r/3150
........
Merged revisions 407016 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@407030 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When subscribing to MWI (res_pjsip_mwi) and the sip uri did not contain a name
(ex: sip:<ip address>) then the subscription would fail since it would be unable
to locate an associated aor. This patch makes it so that when a subscribe comes
with no aor name then it will subscribe to all aors on the located endpoint.
(closes issue ASTERISK-23072)
Reported by: Bob M
Review: https://reviewboard.asterisk.org/r/3164/
........
Merged revisions 407014 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@407015 65c4cc65-6c06-0410-ace0-fbb531ad65f3
In NAT scenarios where a call is placed to a Grandstream phone,
res_pjsip will sometimes send the ACK to a 200 OK to the private
address of the device behind the NAT instead of the address of the NAT
device. This corrects that behavior by rewriting the address in the
Contact header in the incoming 200 OK and the dialog's target address
if necessary (since it has already been rewritten to the incorrect
private address).
(closes issue ASTERISK-23106)
Review: https://reviewboard.asterisk.org/r/3168/
Reported by: Matt Jordan
........
Merged revisions 407000 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@407001 65c4cc65-6c06-0410-ace0-fbb531ad65f3
What seems to be happening is if a subscription has been terminated and the
subscription timeout/expires is less than the time it takes for all pending
transactions (currently on the subscription) to end then the subscription
timer will not have been canceled yet and sub will be null. Since the
subscription has already been canceled nothing needs to be done so a null
check in the asterisk code is sufficient in working around this problem.
(closes issue ASTERISK-23129)
Reported by: Dan Jenkins
........
Merged revisions 406847 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@406848 65c4cc65-6c06-0410-ace0-fbb531ad65f3
On some systems the values for INFINITY and NAN are not defined thus causing
a build error on those systems. Added definitions for those if they had
not previously been defined.
(closes issue ASTERISK-23056)
Reported by: capouch
Patches:
inf-nan-patch.txt uploaded by capouch (license 6564)
........
Merged revisions 406788 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@406789 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Currently, attempting to subscribe an application to a device state
that it has already subscribed to will generate a 500 error response.
This will now be treated as a subscription refresh even though ARI
subscriptions don't currently support lifetimes and will respond with
the normal response for a successful subscription (200 OK).
(closes issue ASTERISK-23143)
Reported by: Matt Jordan
........
Merged revisions 406775 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@406778 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The core may (depending on circumstances) request a single codec on outgoing
calls. Many channel drivers ignore or treat this as a suggestion while still
including configured codecs. The res_pjsip_session logic treated this as
an explicit request, leaving out other configured codecs.
This change makes res_pjsip_session behave like other channel driver and simply
adds the requested codec to the list.
(closes issue ASTERISK-23082)
Reported by: xrobau
Review: https://reviewboard.asterisk.org/r/3140/
........
Merged revisions 406489 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@406490 65c4cc65-6c06-0410-ace0-fbb531ad65f3
........
r406294 | mmichelson | 2014-01-23 15:00:24 -0600 (Thu, 23 Jan 2014) | 11 lines
Fix presence body errors found during testing:
* PIDF bodies were reporting an "open" state in many cases where
it should have been reporting "closed"
* XPIDF bodies had XML nodes placed incorrectly within the hierarchy.
* SIP URIs in XPIDF bodies did not go through XML sanitization
* XML sanitization had some errors:
* Right angle bracket was being replaced with "&rt;" instead of ">"
* Double quote, apostrophe, and ampersand were not being escaped.
........
r406295 | mmichelson | 2014-01-23 15:09:35 -0600 (Thu, 23 Jan 2014) | 11 lines
Fix presence body errors found during testing:
* PIDF bodies were reporting an "open" state in many cases where
it should have been reporting "closed"
* XPIDF bodies had XML nodes placed incorrectly within the hierarchy.
* SIP URIs in XPIDF bodies did not go through XML sanitization
* XML sanitization had some errors:
* Right angle bracket was being replaced with "&rt;" instead of ">"
* Double quote, apostrophe, and ampersand were not being escaped.
........
Merged revisions 406294-406295 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@406298 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Several of the playback error messages for invalid media input in
res_stasis_playback.c had the media name and channel name reversed.
They now correctly identify the channel name and media name.
Reported by: skrusty
........
Merged revisions 406152 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@406153 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Making the help text for both more explicit regarding the format of mailbox identifiers. i.e. clarifying the format for app_voicemail mailboxes vs mailboxes from external MWI sources through modules such as res_external_mwi.
........
Merged revisions 406133 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@406134 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The PJSIP header parsing function (pjsip_parse_hdr) can generate more
than one header instance from a single header field. These header
instances exist as a list attached to the returned header and must be
handled appropriately when they are added to a message or else only the
first header instance will be used. This changes the linked list
functions used in outbound proxy code to merge the lists properly.
........
Merged revisions 406020 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@406022 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This adds back in support for specifying channel variables during an
originate without compromising the ability to specify query parameters
in the JSON body. This was accomplished by generating the body-parsing
code in a separate function instead of being integrated with the URI
query parameter parsing code such that it could be called by paths with
body parameters. This is transparent to the user of the API and
prevents manual duplication of code or data structures.
(closes issue ASTERISK-23051)
Review: https://reviewboard.asterisk.org/r/3122/
Reported by: Matt Jordan
........
Merged revisions 406003 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@406006 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This change adds improvements to support for allow=all in
pjsip.conf so that it functions as intended. Previously,
the allow/disallow socery configuration would set & clear
codecs from the media.codecs and media.prefs list, but if
all was specified the prefs list was not updated. Then a
call would fail when create_outgoing_sdp_stream() created
an SDP with no audio codecs.
A new function ast_codec_pref_append_all() is provided to
add all codecs to the prefs list - only those not already
on the list. This enables the configuration to specify a
codec preference, but still add all codecs, and even then
remove some codecs, as shown in this example:
allow = ulaw, alaw, all, !g729, !g723
Also, the display order of allow in cli output is updated
to match the configuration by using prefs instead of caps
when generating a human readable string.
Finally, a change to create_outgoing_sdp_stream() skips a
codec when it does not have a payload code instead of the
call failing.
(closes issue ASTERISK-23018)
Reported by: xrobau
Review: https://reviewboard.asterisk.org/r/3131/
........
Merged revisions 405875 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@405876 65c4cc65-6c06-0410-ace0-fbb531ad65f3
If an endpoint had previously dynamically registered a contact and the contact
information was successfully stored in astdb then upon restart the qualify
notifications would not be sent out if the qualify_frequency was set. This was
due to the fact that only permanent contacts were being checked and scheduled
for qualifies on startup. Modified the code to check and schedule all
registered contacts at startup.
(closes issue ASTERISK-23062)
Reported by: Rusty Newton
Review: https://reviewboard.asterisk.org/r/3124/
........
Merged revisions 405748 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@405749 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When path support was added and contacts were made available during
request creation and transmission, the code path used by outbound
qualify support was not modified correctly and was causing request
creation to fail. This ensures that outbound request creation with only
a contact and no dialog, endpoint, or uri can succeed which restores
qualify support.
Reported by: gtjoseph
Reported by: kharwell
........
Merged revisions 405743 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@405744 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This adds Path support to chan_pjsip in res_pjsip_path.c with minimal
additions in res_pjsip_registrar.c to store the path and additions in
res_pjsip_outbound_registration.c to enable advertisement of path
support to registrars and intervening proxies.
Path information is stored on contacts and is enabled via Address of
Record (AoRs) and Registration configuration sections.
While adding path support, it became necessary to be able to add SIP
supplements that handled messages outside of sessions, so a framework
for handling these types of hooks was added in parallel to the
already-existing session supplements and several senders of
out-of-dialog requests were refactored as a result.
(closes issue ASTERISK-21084)
Review: https://reviewboard.asterisk.org/r/3050/
........
Merged revisions 405565 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@405566 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Adds the following AMI commands:
PUT mailboxes/mailboxName
modifies mailbox state and implicitly creates new mailboxes
GET mailboxes/mailboxName
retrieves a JSON representation of a single mailbox if it exists
GET mailboxes
retrieves a JSON array of all mailboxes
DELETE mailbox/mailboxName
deletes a mailbox
Note that res_mwi_external must be loaded for these functions to
actually do anything.
Review: https://reviewboard.asterisk.org/r/3117/
........
Merged revisions 405553 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@405554 65c4cc65-6c06-0410-ace0-fbb531ad65f3
We were not including an authentication challenge when sending a 401 response
to unmatched endpoints. This was due to the conversion to use a vector for
authentication section names on an endpoint. The vector for artificial endpoints
was empty, resulting in the challenge being sent back containing no challenges.
This is worked around by placing a bogus value in the artificial endpoint's auth
vector. This value is never looked up by anything, since they instead will directly
call ast_sip_get_artificial_auth().
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@405420 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This change fixes a few memory leaks that were found based
on a mailing list post.
1. Some JSON response messages were never freed. This was
caused by the documentation stating that message references
were stolen when in reality they were not. The code now follows
the documentation and usage has been updated.
2. HTTP response headers were never freed.
3. The variable list for wildcards paths was never freed.
(closes issue ASTERISK-23128)
Reported by: Kenneth Watson (on list)
Review: https://reviewboard.asterisk.org/r/3119/
........
Merged revisions 405325 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@405326 65c4cc65-6c06-0410-ace0-fbb531ad65f3
In ast_rtp_ice_start if the ice session create check list failed, start check
was never initiated and ice_started was never set to true. Upon re-entering
the function (for instance, [un]hold) it would try to create the check list
again with duplicate remote candidates.
Fixed so that if the create check list fails the necessary data structures
are properly re-initialized for any subsequent retries.
Note, it was decided to not stop ice support (by calling ast_rtp_ice_stop) on a
check list failure because it possible things might still work. However, a
debug message was added to help with any future troubleshooting.
(closes issue ASTERISK-22911)
Reported by: Vytis Valentinavičius
Patches:
works_on_my_machine.patch uploaded by xytis (license 6558)
........
Merged revisions 405234 from http://svn.asterisk.org/svn/asterisk/branches/11
........
Merged revisions 405235 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@405236 65c4cc65-6c06-0410-ace0-fbb531ad65f3
If the 'rewrite_contact' option was enabled and a Contact header was received
which contained a '*' a crash would occur.
This change makes the res_pjsip_nat module ignore the Contact header if it
contains only a '*'.
(closes issue ASTERISK-23101)
Reported by: Matt Jordan
........
Merged revisions 405019 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@405020 65c4cc65-6c06-0410-ace0-fbb531ad65f3
* The core external MWI resource provides for MWI message counts
persistence using sorcery. With sorcery, the user is able to configure
which sorcery wizzard backend to use if the default astdb is not desired.
* The core external MWI resoruce provides some debugging CLI commands
enabled by defining MWI_DEBUG_CLI.
The debugging CLI commands are:
"mwi delete all",
"mwi delete like <regex>",
"mwi delete mailbox <mailbox>",
"mwi list all",
"mwi list like <regex>",
"mwi show mailbox <mailbox>", and
"mwi update mailbox <mailbox> [<new> [<old>]]".
(closes issue AFS-43)
Review: https://reviewboard.asterisk.org/r/3061/
........
Merged revisions 404952 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@404953 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Depending on which threading was loading the outbound registration it was
possible for the registration client to be allocated outside of a pj thread.
This change moves the creation inside the synchronous task where it is
guaranteed it will occur in a pj thread.
Reported by: Rob Thomas
........
Merged revisions 404923 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@404924 65c4cc65-6c06-0410-ace0-fbb531ad65f3
An md5 hash is 32 bytes long. The char buffer must be at least 33 bytes to
avoid clobbering of the stack. This patch also fixes a potential clobbering
in test_utils.c.
Thanks to Andrew Nagy for reporting and testing this out in #asterisk-dev
Reported by: Andrew Nagy
Tested by: Andrew Nagy
........
Merged revisions 404843 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@404844 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Channel creation in Asterisk is broken up into two steps: requesting and calling.
In some cases a channel may be requested but never called. This happens in the
ChanIsAvail dialplan application for determining if something is reachable or
not. The PJSIP channel driver did not take this situation into account and
attempted to end a session that was never called out on.
The code now checks the session state to determine if the session has been
called out on and if not terminates it instead of ending it.
(closes issue ASTERISK-23074)
Reported by: Kilburn
........
Merged revisions 404652 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@404653 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When applying configuration for outbound registrations the 'server_uri' and
'client_uri' fields were not validated. The code will now confirm that they
exist and that they contain parseable SIP URIs.
Reported by: Andrew Nagy
........
Merged revisions 404592 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@404593 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When destroying a subscription we remove the serializer from its dialog
and decrease its reference count. Depending on which thread dropped the
subscription reference count to 0 it was possible for this to occur in
a thread where it is not possible.
(closes issue ASTERISK-22952)
Reported by: Matt Jordan
........
Merged revisions 404553 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@404554 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When we added support for specifying channel variables for an
origination, we didn't consider how that would interact with another
feature, namely specifying request parameters in a JSON request body.
The method of specifying channel variables (as a flat JSON object passed
in the JSON body) interferes with parsing parameters out of the request
body.
Unfortunately, fixing this would be a backward incompatible change. In
the interest of keeping the API sane and keeping our release schedule,
we're dropping the feature for specifying channel variables in the
origination request.
We will bring the feature back soon, as a backward compatible addition
to the API.
(closes issue ASTERISK-23051)
Review: https://reviewboard.asterisk.org/r/3088
........
Merged revisions 404509 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@404512 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Implements the following cli commands:
pjsip list aors
pjsip list auths
pjsip list channels
pjsip list contacts
pjsip list endpoints
pjsip show aor(s)
pjsip show auth(s)
pjsip show channels
pjsip show endpoint(s)
Also...
Minor modifications made to the AMI command implementations to facilitate
reuse.
New function ast_variable_list_sort added to config.c and config.h to implement
variable list sorting.
(issue ASTERISK-22610)
patches:
pjsip_cli_v2.patch uploaded by george.joseph (License 6322)
........
Merged revisions 404480 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@404507 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When transferring to a dialplan extension that will not place any outbound
calls, the only control frames that the PJSIP REFER framehook will receive
are inconsequential (such as unhold or srcchange). As such, we shouldn't
allow for the reception of those types of frames prevent us from signaling
to the transferring party that the transfer has completed successfully once
voice frames are read.
Thanks to Jonathan Rose for pointing this out.
........
Merged revisions 404439 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@404452 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The documentation for ARI already specifies that the device state resource when
used for subscribing for events is "deviceState", not "device_state". The code,
however, used "device_state"; although this was inconsistent as well in doxygen
comments in resource_applications.
Because the actual resource being subscribed to is /deviceStates/{device}/, it
makes sense for the resource type specifier to be deviceState.
Note that the key value in the events is still "device_state".
........
Merged revisions 404437 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@404438 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The process for resending an INVITE with authentication involves restarting the UAC
session. We were incorrectly passing in that a new offer is being sent, causing the
SDP negotiation to get into a (technically speaking) funky state.
........
Merged revisions 404369 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@404370 65c4cc65-6c06-0410-ace0-fbb531ad65f3
For the explanation, here is a copy-paste of the review board explanation:
Initially, it was discovered that performing an attended transfer of a
multiparty bridge with a PJSIP channel would cause a deadlock. A PBX thread
started a masquerade and reached the point where it was calling the fixup()
callback on the "original" channel. For chan_pjsip, this involves pushing a
synchronous task to the session's serializer. The problem was that a task ahead
of the fixup task was also attempting to perform a channel masquerade. However,
since masquerades are designed in a way to only allow for one to occur at a
time, the task ahead of the fixup could not continue until the masquerade
already in progress had completed. And of course, the masquerade in progress
could not complete until the task ahead of the fixup task had completed.
Deadlock.
The initial fix was to change the fixup task to be asynchronous. While this
prevented the deadlock from occurring, it had the frightful side effect of
potentially allowing for tasks in the session's serializer to operate on a
zombie channel.
Taking a step back from this particular deadlock, it became clear that the
problem was not really this one particular issue but that masquerades
themselves needed to be addressed. A PJSIP attended transfer operation calls
ast_channel_move(), which attempts to both set up and execute a masquerade. The
problem was that after it had set up the masquerade, the PBX thread had swooped
in and tried to actually perform the masquerade. Looking at changes that had
been made to Asterisk 12, it became clear that there never is any time now that
anyone ever wants to set up a masquerade and allow for the channel thread to
actually perform the masquerade. Everyone always is calling ast_channel_move(),
performs the masquerade itself before returning.
In this patch, I have removed all blocks of code from channel.c that will
attempt to perform a masquerade if ast_channel_masq() returns true. Now, there
is no distinction between setting up a masquerade and performing the
masquerade. It is one operation. The only remaining checks for
ast_channel_masq() and ast_channel_masqr() are in ast_hangup() since we do not
want to interrupt a masquerade by hanging up the channel. Instead, now
ast_hangup() will wait for a masquerade to complete before moving forward with
its operation.
The ast_channel_move() function has been modified to basically in-line the
logic that used to be in ast_channel_masquerade(). ast_channel_masquerade() has
been killed off for real. ast_channel_move() now has a lock associated with it
that is used to prevent any simultaneous moves from occurring at once. This
means there is no need to make sure that ast_channel_masq() or
ast_channel_masqr() are already set on a channel when ast_channel_move() is
called. It also means the channel container lock is not pulling double duty by
both keeping the container locked and preventing multiple masquerades from
occurring simultaneously.
The ast_do_masquerade() function has been renamed to do_channel_masquerade()
and is now internal to channel.c. The function now takes explicit arguments of
which channels are involved in the masquerade instead of a single channel.
While it probably is possible to do some further refactoring of this method, I
feel that I would be treading dangerously. Instead, all I did was change some
comments that no longer are true after this changeset.
The other more minor change introduced in this patch is to res_pjsip.c to make
ast_sip_push_task_synchronous() run the task in-place if we are already a SIP
servant thread. This is related to this patch because even when we isolate the
channel masquerade to only running in the SIP servant thread, we would still
deadlock when the fixup() callback is reached since we would essentially be
waiting forever for ourselves to finish before actually running the fixup. This
makes it so the fixup is run without having to push a task into a serializer at
all.
(closes issue ASTERISK-22936)
Reported by Jonathan Rose
Review: https://reviewboard.asterisk.org/r/3069
........
Merged revisions 404356 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@404368 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This change is in preparation for external MWI support.
Removed code from the system for normal mailbox handling that appends
@default to the mailbox identifier if it does not have a context. The
only exception is the legacy hasvoicemail users.conf option. The legacy
option will only work for app_voicemail mailboxes. The system cannot make
any assumptions about the format of the mailbox identifer used by
app_voicemail.
chan_sip and chan_dahdi/sig_pri had the most changes because they both
tried to interpret the mailbox identifier. chan_sip just stored and
compared the two components. chan_dahdi actually used the box
information.
The ISDN MWI support configuration options had to be reworked because
chan_dahdi was parsing the box@context format to get the box number. As a
result the mwi_vm_boxes chan_dahdi.conf option was added and is documented
in the chan_dahdi.conf.sample file.
Review: https://reviewboard.asterisk.org/r/3072/
........
Merged revisions 404348 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@404350 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Original commit message by mmichelson (asterisk 12 r403311):
"This adds channel locks around calls to create channel snapshots as well
as other functions which operate on a channel and then end up
creating a channel snapshot. Functions that expect the channel to be
locked prior to being called have had their documentation updated to
indicate such."
The above was initially committed and then reverted at r403398. The problem
was found to be in core_local.c in the publish_local_bridge_message function.
The ast_unreal_lock_all function locks and adds a reference to the returned
channels and while they were being unlocked they were not being unreffed when
no longer needed. Fixed by unreffing the channels.
Also in bridge.c a lock was obtained on "other->chan", but then an attempt was
made to unlock "other" and not the previously locked channel. Fixed by
unlocking "other->chan"
(closes issue ASTERISK-22709)
Reported by: John Bigelow
........
Merged revisions 404237 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@404260 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Bridges have two new optional properties, a creator and a name.
Certain consumers of bridges will automatically provide bridges that
they create with these properties. Examples include app_bridgewait,
res_parking, app_confbridge, and app_agent_pool. In addition, a name
may now be provided as an argument to the POST function for creating
new bridges via ARI.
(closes issue AFS-47)
Review: https://reviewboard.asterisk.org/r/3070/
........
Merged revisions 404042 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@404043 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When creating channels via ARI, the current code fails to provide any default
format capabilities. For non-virtual channels this isn't really a problem -
the channels typically receive their capabilities as a result of the
underlying channel driver configuration. For virtual channels (such as Local
channels), the lack of any format capabilities causes the Asterisk core to
make some 'odd' choices with respect to the translation paths. The issue
reporter had some paths that had 3 hops on each channel leg, causing multiple
transcodings and some really crappy audio/performance.
By specifying a baseline of SLIN, we prevent that from occurring. Note that
this is what AMI does when it performs an Originate, as does res_clioriginate.
Review: https://reviewboard.asterisk.org/r/3068/
(issue ASTERISK-22962)
Reported by: Matt DiMeo
........
Merged revisions 403993 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@403994 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This change adds an event for when an originated call is redirected to
another target. This event contains the original channel and the newly
created channel. If a stasis subscription exists on the original originated
channel for a stasis application then a new subscription will also be
created on the stasis application to the redirected channel. This allows
the application to follow the call path completely.
(closes issue ASTERISK-22719)
Reported by: Joshua Colp
Review: https://reviewboard.asterisk.org/r/3054/
........
Merged revisions 403808 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@403810 65c4cc65-6c06-0410-ace0-fbb531ad65f3
There were still a few cases in which ATTENDEDTRANSFER and BLINDTRANSFER
wouldn't be set on channels involved with blind and attended transfers.
This would happen with features that were initialized by channel driver
specific mechanisms in multiparty calls. This patch resolves those cases
while attempted to keep the behavior for setting those variables as
consistent as possible.
(closes issue AFS-24)
Review: https://reviewboard.asterisk.org/r/3040/
........
Merged revisions 403781 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@403783 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Added the ability to specify channel variables when creating/originating a
channel in ARI. The variables are sent in the body of the request and should
be formatted as a single level JSON object. No nested objects allowed.
For example: {"variable1": "foo", "variable2": "bar"}.
(closes issue ASTERISK-22872)
Reported by: Matt Jordan
Review: https://reviewboard.asterisk.org/r/3052/
........
Merged revisions 403752 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@403757 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Added the ability to have rules that are checked when adding and/or removing
channels to/from a bridge. In this case, if a channel is currently recording
and someone attempts to add it to a bridge an "is recording" rule is checked,
fails, and a 409 conflict is returned.
Also command functions now return an integer value that can be descriptive of
what kind of problems, if any, occurred before or during execution.
(closes issue ASTERISK-22624)
Reported by: Joshua Colp
Review: https://reviewboard.asterisk.org/r/2947/
........
Merged revisions 403749 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@403750 65c4cc65-6c06-0410-ace0-fbb531ad65f3
In some cases messages need to be sent to a direct URI (sip:<ip address>). This
patch adds in that support by using a default outbound endpoint. When sending
messages, if no endpoint can be found then the default one is used.
To facilitate this a new default_outbound_endpoint option was added to the
globals section for pjsip.conf.
Review: https://reviewboard.asterisk.org/r/2944/
........
Merged revisions 403680 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@403687 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch adds CHANNEL read support for chan_pjsip. This allows the dialplan
to use the CHANNEL function on a chan_pjsip channel to obtain run-time
information about the channel from the PJSIP channel driver and the PJSIP
stack. This includes:
* RTP information, including source/destination media addresses, whether or
not the media is secure, held, and other properties.
* RTCP information. This includes sets of parseable information, as well as
individual statistic attriutes.
* PJSIP information. This includes URIs, local/remote signalling addresses,
whether or not the signalling is secure, and other properties.
* The endpoint name. This can be used in conjunction with the PJSIP_ENDPOINT
function to obtain more detailed endpoint information.
Review: https://reviewboard.asterisk.org/r/3038/
........
Merged revisions 403618 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@403619 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When switching to using a vector for authentication, I initialized
the vector for the artificial endpoint to be of size 1. However, this
does not result in AST_VECTOR_SIZE() returning 1 since there isn't
actually anything in the vector.
Rather than trifle with the vector by putting unnecessary elements in,
I simply changed the callback in res_pjsip_authenticator_digest.c to
explicitly report that the artificial endpoint requires authentication.
Thanks to Joshua Colp for pointing this out.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@403605 65c4cc65-6c06-0410-ace0-fbb531ad65f3
res_sorcery_astdb.c: Fix get multiple records by regex.
* Fix sorcery_astdb_retrieve_regex() pattern matching. Let the regexec()
function match the stored key values instead of having astdb prefilter
them. Previoiusly you could only use a simple regex pattern when the
pattern began with '^'.
........
Merged revisions 403559 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@403560 65c4cc65-6c06-0410-ace0-fbb531ad65f3
* Fix sorcery_astdb_retrieve_regex() pattern matching. Let the regexec()
function match the stored key values instead of having astdb prefilter
them. Previoiusly you could only use a simple regex pattern when the
pattern began with '^'.
* Fix off nominal memory leak in sorcery_astdb_retrieve_regex().
........
Merged revisions 403545 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@403546 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Due to the way pjproject internally works it was possible for the
NAT module to not be invoked on messages with-in a session dialog.
This means that the various parts of the message would not get rewritten
with the source IP address and port.
This change uses a session supplement to add the NAT module
to the dialog on the first incoming or outgoing INVITE.
(closes issue ASTERISK-22941)
Reported by: Leif Madsen
........
Merged revisions 403510 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@403511 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Prior to this patch, res_fax_spandsp was conservative with how it initialized
the spandsp T.38 context. It would only initialize it if the driver thought
the current state was a T.38 fax. While this works fine in nominal situations,
in certain off nominal situations, res_fax_spandsp can believe that a T.38
fax will not occur when in fact one has started. In particular, this was
discovered when res_fax would fall back to audio after timing out on a T.38
upgrade. The SIP channel driver would continue to retry the re-INVITE and -
if the remote end responded after res_fax timed out with a 200 OK - a T.38
frame would be delivered to the res_fax stack when it no longer expected it.
As it turns out, there does not appear to be any downside to always
initializing the T.38 context, other than the actual memory allocation.
Since that avoids this off nominal situation (and others which are equally
likely hard to predict), this is the safest way to avoid this problem.
Much thanks to Torrey as well for providing a scenario that reproduces this
issue.
(closes issue ASTERISK-21242)
Reported by: Ashley Winters
Tested by: Torrey Searle
patches:
always-init-t38.patch uploaded by awinters (License 6477)
A_PARTY.xml uploaded by tsearle (License 5334)
........
Merged revisions 403449 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 403450 from http://svn.asterisk.org/svn/asterisk/branches/11
........
Merged revisions 403458 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@403466 65c4cc65-6c06-0410-ace0-fbb531ad65f3
If the CDR unregistration fails due to an inflight CDR, the
res_config_sqlite module needs to bail on unloading itself. Otherwise,
the config could be unloaded (including the CDR table name) while the
CDR engine posts a CDR to the still registered backend, resulting in
a crash.
........
Merged revisions 403435 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@403436 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The code for getting channel variables from ARI assumed that you needed
to lock the channel in order to properly execute functions and read
channel variables. Apparently, this is not the case, since any dialplan
function that puts the channel into autoservice deadlocks when
attempting to remove the channel from autoservice.
........
Merged revisions 403342 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@403403 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This crept up during gateway testing where the gateway would receive
the request to negotiate and assume it came from the remote side, causing
the gateway state machine to go a little, to a use a technical term,
"wonky".
........
Merged revisions 403364 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@403365 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Passing a non-zero value causes PJLIB to use the given input as the
hash value. Passing zero causes the parameter to become an output parameter
that receives the hash value that was computed based on the given key.
This change essentially makes ast_sip_dict_get() properly retrieve the
desired value.
........
Merged revisions 403349 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@403350 65c4cc65-6c06-0410-ace0-fbb531ad65f3
* Make ast_sorcery_observer_remove() accept a const callbacks struct.
* Make ast_sorcery_observer_remove() tolerant of the sorcery parameter
being NULL. Now it can be called within a module unload routine if the
sorcery initialization fails.
* Fix ast_sorcery_observer_add() to fail if the container link fails.
........
Merged revisions 403324 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@403327 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This adds channel locks around calls to create channel snapshots as well
as other functions which operate on a channel and then end up
creating a channel snapshot. Functions that expect the channel to be
locked prior to being called have had their documentation updated to
indicate such.
........
Merged revisions 403311 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@403314 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Transport type determination for security events has been simplified to use
the type present on the message itself instead of searching through configured
transports to find the transport used.
The actual WebSocket transport has also been simplified. It now leverages the
existing PJSIP transport manager for finding the active WebSocket transport
for outgoing messages. This removes the need for res_pjsip_transport_websocket
to store a mapping itself.
(closes issue ASTERISK-22897)
Reported by: Max E. Reyes Vera J.
Review: https://reviewboard.asterisk.org/r/3036/
........
Merged revisions 403256 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@403257 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Depending on configuration it was possible for a media stream to be
created without any media formats. The produced SDP would fail internal
validation and cause a crash.
The code will now no longer add media streams with no formats to the SDP,
allowing it to pass validation and work.
(closes issue ASTERISK-22858)
Reported by: Anthony Messina
........
Merged revisions 403223 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@403224 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When sending a re-INVITE to an endpoint it was possible for received
headers to be added as well (since they are stored for retrieval using
the PJSIP_HEADER dialplan function). This caused a broken (and
potentially large) SIP INVITE to be produced and sent.
This changes the module so it will no longer add headers to
re-INVITEs.
(closes issue ASTERISK-22882)
Reported by: David M. Lee
........
Merged revisions 403221 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@403222 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Certain options available that specify a SIP URI perform validation
on the provided URI using the PJSIP URI parser. This operation
requires that the thread executing it be registered with the PJLIB
library. During reloads this was done on a thread which was NOT
registered with it.
This fixes the problem by creating a task which reloads the
configuration on a PJSIP thread.
(closes issue ASTERISK-22923)
Reported by: Anthony Messina
........
Merged revisions 403179 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@403180 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The patch allows ARI to parse request parameters from an incoming JSON
request body, instead of requiring the request to come in as query
parameters (which is just weird for POST and DELETE) or form
parameters (which is okay, but a bit asymmetric given that all of our
responses are JSON).
For any operation that does _not_ have a parameter defined of type
body (i.e. "paramType": "body" in the API declaration), if a request
provides a request body with a Content type of "application/json", the
provided JSON document is parsed and searched for parameters.
The expected fields in the provided JSON document should match the
query parameters defined for the operation. If the parameter has
'allowMultiple' set, then the field in the JSON document may
optionally be an array of values.
(closes issue ASTERISK-22685)
Review: https://reviewboard.asterisk.org/r/2994/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@403177 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Some options (such as call_group and pickup_group) share the same configuration
handler and decide what logic to use based on the name of the option. These
handlers were not updated to check for the new option names and were treating
the options as invalid.
This change simply updates the handlers with the proper names of the options.
(closes issue ASTERISK-22922)
Reported by: Anthony Messina
........
Merged revisions 403173 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@403174 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Created a data model and implemented functionality for an ARI device state
resource. The following operations have been added that allow a user to
manipulate an ARI controlled device:
Create/Change the state of an ARI controlled device
PUT /deviceStates/{deviceName}&{deviceState}
Retrieve all ARI controlled devices
GET /deviceStates
Retrieve the current state of a device
GET /deviceStates/{deviceName}
Destroy a device-state controlled by ARI
DELETE /deviceStates/{deviceName}
The ARI controlled device must begin with 'Stasis:'. An example controlled
device name would be Stasis:Example. A 'DeviceStateChanged' event has also
been added so that an application can subscribe and receive device change
events. Any device state, ARI controlled or not, can be subscribed to.
While adding the event, the underlying subscription control mechanism was
refactored so that all current and future resource subscriptions would be
the same. Each event resource must now register itself in order to be able
to properly handle [un]subscribes.
(issue ASTERISK-22838)
Reported by: Matt Jordan
Review: https://reviewboard.asterisk.org/r/3025/
........
Merged revisions 403134 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@403135 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Created the following AMI commands and corresponding events for res_pjsip:
PJSIPShowEndpoints - Provides a listing of all pjsip endpoints and a few
select attributes on each.
Events:
EndpointList - for each endpoint a few attributes.
EndpointlistComplete - after all endpoints have been listed.
PJSIPShowEndpoint - Provides a detail list of attributes for a specified
endpoint.
Events:
EndpointDetail - attributes on an endpoint.
AorDetail - raised for each AOR on an endpoint.
AuthDetail - raised for each associated inbound and outbound auth
TransportDetail - transport attributes.
IdentifyDetail - attributes for the identify object associated with
the endpoint.
EndpointDetailComplete - last event raised after all detail events.
PJSIPShowRegistrationsInbound - Provides a detail listing of all inbound
registrations.
Events:
InboundRegistrationDetail - inbound registration attributes for each
registration.
InboundRegistrationDetailComplete - raised after all detail records have
been listed.
PJSIPShowRegistrationsOutbound - Provides a detail listing of all outbound
registrations.
Events:
OutboundRegistrationDetail - outbound registration attributes for each
registration.
OutboundRegistrationDetailComplete - raised after all detail records
have been listed.
PJSIPShowSubscriptionsInbound - A detail listing of all inbound subscriptions
and their attributes.
Events:
SubscriptionDetail - on each subscription detailed attributes
SubscriptionDetailComplete - raised after all detail records have
been listed.
PJSIPShowSubscriptionsOutbound - A detail listing of all outboundbound
subscriptions and their attributes.
Events:
SubscriptionDetail - on each subscription detailed attributes
SubscriptionDetailComplete - raised after all detail records have
been listed.
(issue ASTERISK-22609)
Reported by: Matt Jordan
Review: https://reviewboard.asterisk.org/r/2959/
........
Merged revisions 403131 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@403133 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This change prevents channels used as implementation details from
leaking out to ARI. It does this by preventing creation of JSON blobs
of channel snapshots created from those channels and sanitizing JSON
blobs of bridge snapshots as they are created. This introduces a
framework for excluding information from output targeted at Stasis
applications on a consumer-by-consumer basis using channel sanitization
callbacks which could be extended to bridges or endpoints if necessary.
This prevents unhelpful error messages from being generated by
ast_json_pack.
This also corrects a bug where BridgeCreated events would not be
created.
(closes issue ASTERISK-22744)
Review: https://reviewboard.asterisk.org/r/2987/
Reported by: David M. Lee
........
Merged revisions 403069 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@403070 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The direct media format capabilities are always allocated in
ast_sip_session_alloc and were not freed in the session destructor. Whoops.
(This being the third whoops caught by Scott and Nitesh's valgrind work for
the Asterisk Test Suite. Nifty!)
........
Merged revisions 402968 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@402969 65c4cc65-6c06-0410-ace0-fbb531ad65f3
In PJMEDIA, pjmedia_sdp_rtpmap_to_attr will attempt to use the string
rtpmap.param regardless of its length value. Simply setting the length to 0
does not prevent the garbage on the stack in rtpmap.param.ptr from being
formatted in a sprintf call. This patch initializes the string to NULL so that
at the very least, something is provided to the function that is predictable.
........
Merged revisions 402941 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@402943 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch fixes a reference counting memory leak on the ao2_container
created as part of create_mwi_subscriptions. When we create the container
in this routine, the intent is to hand lifetime ownership over to the global
container unsolicited_mwi. When ao2_global_obj_replace_unref is called, the
reference count on mwi_subscriptions (the container) will be bumped by 1;
however, the function does not decrement the reference count on
mwi_subscriptions when this occurs. This will prevent the container from being
fully disposed of when Asterisk exits (or on any subsequent call to this
operation, such as during a reload).
........
Merged revisions 402940 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@402942 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The fromuser option is used to explicitly set the user within the From header. The
res_pjsip_caller_id module did not take this setting into account when determining
if the From header could be modified or not.
(closes issue ASTERISK-22866)
Reported by: Anthony Messina
........
Merged revisions 402891 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@402892 65c4cc65-6c06-0410-ace0-fbb531ad65f3
SIP transaction group lock support has been backported into our pjproject. Since the code
now internally uses a group lock the code is now changed to unlock it if present. Note
that the act of finding the transaction is what actually returns it locked.
For further information about group locks check out the wiki page at:
http://trac.pjsip.org/repos/wiki/Group_Lock
(issue ASTERISK-22818)
Reported by: Matt Jordan
........
Merged revisions 402864 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@402865 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Was returning a 404 on a valid technology with an empty list of endpoints.
Now checking against the channel tech to make sure the tech itself is valid
and not just an empty list of endpoints.
(issue ASTERISK-22803)
Reported by: David M. Lee
........
Merged revisions 402793 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@402795 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Implementation listing endpoints by technology returned an empty array if no
matching endpoints were found. Fixed so a "404 Not Found" will be returned
instead.
(closes issue ASTERISK-22803)
Reported by: David M. Lee
........
Merged revisions 402787 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@402788 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Both res_pjsip_messaging and res_pjsip_header_funcs were causing asterisk to
crash because they were trying to dereference a NULL pointer.
In the case of res_pjsip_messaging it was attempting to "print" a contact
header that did not exist. In fact contact headers should not be part of
a SIP MESSAGE, so the offending code was simply removed.
In the case of res_pjsip_header_funcs a null private channel tech was being
passed to the function and then later dereferenced. Added null checks (and
error logging) to the read/write function handlers to guard against crashing.
(closes issue ASTERISK-22821)
Reported by: Anthony Messina
........
Merged revisions 402757 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@402758 65c4cc65-6c06-0410-ace0-fbb531ad65f3
* Fix unlinking from the app_bridges_moh container in remove_bridge_moh()
without a lock under normal circumstances.
* Made check ast_bridge_set_after_callback() return value in
bridge_moh_create() to handle failure.
* Fixed SCOPED_AO2LOCK() locking over too much scope in
stasis_app_bridge_moh_channel() and stasis_app_bridge_moh_stop().
* Fixed unusual usage of ao2_unlink_flag() in control_unlink().
* Fixed orphaned bridge from off nominal path in
stasis_app_bridge_create().
* Fixed strange construct in stasis_app_unsubscribe(). From a bad merge?
* Made load_module() cleanup on failure.
Review: https://reviewboard.asterisk.org/r/2962/
........
Merged revisions 402593 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@402595 65c4cc65-6c06-0410-ace0-fbb531ad65f3
ARI POST calls only accept parameters via the URL's query string.
While this works, it's atypical for HTTP API's in general, and
specifically frowned upon with RESTful API's.
This patch adds parsing for application/x-www-form-urlencoded request
bodies if they are sent in with the request. Any variables parsed this
way are prepended to the variable list supplied by the query string.
(closes issue ASTERISK-22743)
Review: https://reviewboard.asterisk.org/r/2986/
........
Merged revisions 402555 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@402557 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Previously, regardless of whether failure to authenticate was due to
lacking any authentication or actually failing authentication, the
Digest Authenticator would simply return that a challenge was still
needed. It will continue to do that when no authentication information
is in the received SIP digest, but when authentication information
is present and does not pass authentication, that will be treated as
an authentication error. This is to ensure that PJSIP will issue
security events indicated failed auths.
........
Merged revisions 402537 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@402538 65c4cc65-6c06-0410-ace0-fbb531ad65f3
While working on building client libraries from the Swagger API, I
noticed a problem with the nicknames.
channel.deleteChannel()
channel.answerChannel()
channel.muteChannel()
Etc. We put the object name in the nickname (since we were generating C
code), but it makes OO generators redundant.
This patch makes the nicknames more OO friendly. This resulted in a lot
of name changing within the res_ari_*.so modules, but not much else.
There were a couple of other fixed I made in the process.
* When reversible operations (POST /hold, POST /unhold) were made more
RESTful (POST /hold, DELETE /unhold), the path for the second operation
was left in the API declaration. This worked, but really the two
operations should have been on the same API.
* The POST /unmute operation had still not been REST-ified.
Review: https://reviewboard.asterisk.org/r/2940/
........
Merged revisions 402528 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@402529 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The ring operation sends ringing to the specified channel it is invoked on.
The dtmf operation can be used to send DTMF digits to the specified channel
of a specific length with a wait time in between. Finally hangup reasons
allow you to specify why a channel is being hung up (busy, congestion).
Early media behavior has also been tweaked slightly. When playing media to a channel
it will no longer automatically answer. If it has not been answered a progress indication
is sent instead.
(closes issue ASTERISK-22701)
Reported by: Matt Jordan
Review: https://reviewboard.asterisk.org/r/2916/
........
Merged revisions 402358 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@402359 65c4cc65-6c06-0410-ace0-fbb531ad65f3
If a Stasis application is specified an implicit subscription is done on the originated
channel. This was previously done with the channel lock held which is dangerous as the
underlying code locks the container and iterates items. This change releases the lock
on the originated channel before subscribing occurs.
(closes issue ASTERISK-22768)
Reported by: Matt Jordan
Review: https://reviewboard.asterisk.org/r/2979/
........
Merged revisions 402346 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@402347 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This change adds a command to the command queue to explicitly depart the channel
from the bridge when it is told it has left. If the channel has already been departed
or has entered a different bridge this command will become a no-op.
(closes issue ASTERISK-22703)
Reported by: John Bigelow
(closes issue ASTERISK-22634)
Reported by: Kevin Harwell
Review: https://reviewboard.asterisk.org/r/2965/
........
Merged revisions 402336 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@402337 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Parking timeouts did not set any DTMF features for the channel calling the
parker back.
* Added code to set the parkedcalltransfers, parkedcallreparking,
parkedcallhangup, and parkedcallrecording options appropriately for the
channels when a parking timeout occurs. The recall channel DTMF options
are set using the BRIDGE_FEATURES channel variable to allow the other
timeout options to have the DTMF features available.
(closes issue ASTERISK-22630)
Reported by: Kevin Harwell
Review: https://reviewboard.asterisk.org/r/2942/
........
Merged revisions 401422 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@401423 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Most callers of ast_channel_make_compatible() happen before the channels
enter a two party bridge. With the new bridging framework, two party
bridging technologies may also call ast_channel_make_compatible() when
there is more than one thread involved with the two channels.
* Added channel lock protection in set_format() and
ast_channel_make_compatible_helper() when dealing with the channel's
native formats while setting up a translation path.
* Fixed best_src_fmt and best_dst_fmt usage consistency in
ast_channel_make_compatible_helper(). The call to
ast_translator_best_choice() got them backwards.
* Updated some callers of ast_channel_make_compatible() and the function
documentation. There is actually a difference between the two channels
passed in.
* Fixed the deadlock potential in res_fax.c dealing with
ast_channel_make_compatible(). The deadlock potential was already there
anyway because res_fax called ast_channel_make_compatible() with chan
locked.
(closes issue ASTERISK-22542)
Reported by: Matt Jordan
Review: https://reviewboard.asterisk.org/r/2915/
........
Merged revisions 401239 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@401240 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This makes it clear that the ARI API calls for listing channels and
bridges will list all channels or bridges in the system and not just
those that are in or are controlled by a Stasis application.
(closes issue ASTERISK-22635)
Reported by: Kevin Harwell
........
Merged revisions 401087 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@401088 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This adds the list of expected errors to the /bridges/{bridgeId}/record
ARI documentation so that outbound 4xx errors validate properly.
Previously, this would result in a response validation failure.
(closes issue ASTERISK-22627)
Reported by: Joshua Colp
........
Merged revisions 401018 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@401019 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The INVITE session state callback wrongly assumes that a session will always exist, but
when rapidly terminating the session this assumption goes out the window. As all handler
code for the INVITE session state callback requires the session it will now just exit
immediately if no session exists.
(closes issue ASTERISK-22668)
Reported by: John Bigelow
........
Merged revisions 400872 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@400873 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When generating the list of authentication credentials to pass to
PJSIP, Asterisk was using the raw pointer of a pj_str_t which is not
always NULL-terminated. This sometimes resulted in incorrect text for
the realm and a failure to match the realm for authentication purposes
which was causing the outbound nominal auth pjsip basic call test to
bounce. This now uses the pj_str_t that contains the realm instead of
generating a new one. Thanks to John Bigelow for helping to narrow this
down.
........
Merged revisions 400863 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@400864 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This change fixes two issues when setting an outbound proxy:
1. The outbound proxy URI was not parsed and validated during configuration.
2. If an outgoing dialog was created and the outbound proxy could not be set an assertion would
occur because the usage count on the dialog was not decremented.
The documentation has also been updated to specify that a full URI must be specified for
the outbound proxy.
(closes issue ASTERISK-22672)
Reported by: Antti Yrjola
........
Merged revisions 400824 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@400825 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch adds support to the PJSIP stack in Asterisk for SIP header
manipulation. Note that this is analagous to SIPAddHeader/SIPRemoveHeader.
For PJSIP_HEADER, an incoming supplemental session callback is registered that
takes the pjsip_hdrs from the incoming session and stores them in a linked
list in the session datastore. Calls to PJSIP_HEADER traverse over the list
and return the nth matching header where 'n' is the 'number' argument to the
function.
When adding a header, the first call creates a datastore and linked list and
adds the datastore to the session. The header is then created as a pjsip_hdr
and added to the list. An outgoing supplemental session callback then
traverses the list and adds the headers to the outgoing pjsip_msg.
When removing a header, the list created with PJSIP_HEADER(add,...) is
traversed and all matching entries are removed.
(closes issue ASTERISK-22498)
Reported by: George Joseph
patch:
res_pjsip_header_funcs_v1.patch uploaded by george.joseph (License 6322)
........
Merged revisions 400771 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@400772 65c4cc65-6c06-0410-ace0-fbb531ad65f3
pjsip_strerror is only aware of PJSIP-specific error
codes. pj_strerror() is aware of all PJProject error
codes and OS-specific error codes.
This specifically fixes an oft-seen error in transport
configuration code where EADDRINUSE would result in
"Unknown PJSIP error 120098" instead of a useful
message.
........
Merged revisions 400749 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@400750 65c4cc65-6c06-0410-ace0-fbb531ad65f3
If you run Asterisk in the background and then connect to
it through a separate console, the thread that runs CLI commands
is not registered with PJLIB. Thus PJLIB does not like it when
you attempt to send OPTIONS requests from that thread. So now
we push the task into the threadpool, which we know to be registered
with PJLIB.
Thanks to Antti Yrjola for reporting this.
........
Merged revisions 400680 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@400683 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The https://reviewboard.asterisk.org/r/2888/ review changes manager to not
subscribe to stasis when it is disabled for performance reasons. When
manager is disabled app_queue and res_agi decline to load and fail to
clean up what they have already allocated.
* Made app_queue and res_agi clean up allocated resources when they
decline to load.
* Made app_queue and res_agi use their own subscriptions to the stasis
topics instead of borrowing manager's message router structure
inappropriately.
(closes issue ASTERISK-22604)
Reported by: rmudgett
Review: https://reviewboard.asterisk.org/r/2902/
........
Merged revisions 400671 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@400672 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch makes the res_pjsip_logger do a few things... First, it
will be built and installed by default now, so end users won't need
to enable it in menuselect. Second, while it is loaded, it no longer
will immediately issue log messages. Upon loading, it is in the
disabled state and must be turned on with the new CLI command. The
CLI command 'pjsip set logger <on/off/host> has been added and can be
used to do the following:
pjsip set logger on:
Enables logger for all PJSIP traffic
pjsip set logger off:
Disables logger for all PJSIP traffic
pjsip set logger host <host>:
Enables logger for the specific host
Review: https://reviewboard.asterisk.org/r/2900/
........
Merged revisions 400542 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@400543 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch adds an /applications API to ARI, allowing explicit management of
Stasis applications.
* GET /applications - list current applications
* GET /applications/{applicationName} - get details of a specific application
* POST /applications/{applicationName}/subscription - explicitly subscribe to
a channel, bridge or endpoint
* DELETE /applications/{applicationName}/subscription - explicitly unsubscribe
from a channel, bridge or endpoint
Subscriptions work by a reference counting mechanism: if you subscript to an
event source X number of times, you must unsubscribe X number of times to stop
receiveing events for that event source.
Review: https://reviewboard.asterisk.org/r/2862
(issue ASTERISK-22451)
Reported by: Matt Jordan
........
Merged revisions 400522 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@400523 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Channel snapshots have string representations of the channel's native formats.
Prior to this change, the format strings were re-created on ever channel snapshot
creation. Since channel native formats rarely change, this was very wasteful.
Now, string representations of formats may optionally be stored on the ast_format_cap
for cases where string representations may be requested frequently. When formats
are altered, the string cache is marked as invalid. When strings are requested, the
cache validity is checked. If the cache is valid, then the cached strings are copied.
If the cache is invalid, then the string cache is rebuilt and copied, and the cache
is marked as being valid again.
Review: https://reviewboard.asterisk.org/r/2879
........
Merged revisions 400356 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@400363 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The callback function for changing the media address in streams wrongly assumes that a connection line
will always be present. This is false as no line is present if a stream has been rejected.
(closes issue ASTERISK-22645)
Reported by: Rusty Newton
........
Merged revisions 400360 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@400361 65c4cc65-6c06-0410-ace0-fbb531ad65f3
........
r400318 | mmichelson | 2013-10-02 17:08:49 -0500 (Wed, 02 Oct 2013) | 12 lines
Remove unnecessary waits from stasis.
Since caches are updated on publisher threads, there is no need
to wait for the cache updates to occur after a stasis message
is published.
In the case of chan_pjsip device state changes, this set of
changes caused an improvement to performance.
Review: https://reviewboard.asterisk.org/r/2890
........
r400319 | mmichelson | 2013-10-02 17:10:54 -0500 (Wed, 02 Oct 2013) | 3 lines
Remove svn:mergeinfo property.
........
Merged revisions 400318-400319 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@400335 65c4cc65-6c06-0410-ace0-fbb531ad65f3
* There were several places in ARI where an external library was mallocing
memory that must always be released with free(). When MALLOC_DEBUG is
enabled, free() is redirected to the MALLOC_DEBUG version. Since the
external library call still uses the normal malloc(), MALLOC_DEBUG
complains that the freed memory block is not registered and will not free
it. These cases must use ast_std_free().
* Changed calls to asprintf() and vasprintf() to the equivalent
ast_asprintf() and ast_vasprintf() versions respectively.
........
Merged revisions 400270 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@400271 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Due to the asynchronous design of the PJMEDIA SDP negotiator it was possible for
the SDP to be negotiated *after* a channel was created and after it was being wait
on by an application. It is only after negotiation occurs that the file descriptors
for RTP are placed on the channel. Since the channel was already being waited on
these file descriptors were not monitored, causing incoming media to never be read.
This change wakes up any application waiting on the channel so that added file
descriptors end up being monitored.
(closes issue AST-1227)
Reported by: John Bigelow
........
Merged revisions 400256 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@400257 65c4cc65-6c06-0410-ace0-fbb531ad65f3
........
r399887 | dlee | 2013-09-26 10:41:47 -0500 (Thu, 26 Sep 2013) | 1 line
Minor performance bump by not allocate manager variable struct if we don't need it
........
r400138 | dlee | 2013-09-30 10:24:00 -0500 (Mon, 30 Sep 2013) | 23 lines
Stasis performance improvements
This patch addresses several performance problems that were found in
the initial performance testing of Asterisk 12.
The Stasis dispatch object was allocated as an AO2 object, even though
it has a very confined lifecycle. This was replaced with a straight
ast_malloc().
The Stasis message router was spending an inordinate amount of time
searching hash tables. In this case, most of our routers had 6 or
fewer routes in them to begin with. This was replaced with an array
that's searched linearly for the route.
We more heavily rely on AO2 objects in Asterisk 12, and the memset()
in ao2_ref() actually became noticeable on the profile. This was
#ifdef'ed to only run when AO2_DEBUG was enabled.
After being misled by an erroneous comment in taskprocessor.c during
profiling, the wrong comment was removed.
Review: https://reviewboard.asterisk.org/r/2873/
........
r400178 | dlee | 2013-09-30 13:26:27 -0500 (Mon, 30 Sep 2013) | 24 lines
Taskprocessor optimization; switch Stasis to use taskprocessors
This patch optimizes taskprocessor to use a semaphore for signaling,
which the OS can do a better job at managing contention and waiting
that we can with a mutex and condition.
The taskprocessor execution was also slightly optimized to reduce the
number of locks taken.
The only observable difference in the taskprocessor implementation is
that when the final reference to the taskprocessor goes away, it will
execute all tasks to completion instead of discarding the unexecuted
tasks.
For systems where unnamed semaphores are not supported, a really
simple semaphore implementation is provided. (Which gives identical
performance as the original taskprocessor implementation).
The way we ended up implementing Stasis caused the threadpool to be a
burden instead of a boost to performance. This was switched to just
use taskprocessors directly for subscriptions.
Review: https://reviewboard.asterisk.org/r/2881/
........
r400180 | dlee | 2013-09-30 13:39:34 -0500 (Mon, 30 Sep 2013) | 28 lines
Optimize how Stasis forwards are dispatched
This patch optimizes how forwards are dispatched in Stasis.
Originally, forwards were dispatched as subscriptions that are invoked
on the publishing thread. This did not account for the vast number of
forwards we would end up having in the system, and the amount of work it
would take to walk though the forward subscriptions.
This patch modifies Stasis so that rather than walking the tree of
forwards on every dispatch, when forwards and subscriptions are changed,
the subscriber list for every topic in the tree is changed.
This has a couple of benefits. First, this reduces the workload of
dispatching messages. It also reduces contention when dispatching to
different topics that happen to forward to the same aggregation topic
(as happens with all of the channel, bridge and endpoint topics).
Since forwards are no longer subscriptions, the bulk of this patch is
simply changing stasis_subscription objects to stasis_forward objects
(which, admittedly, I should have done in the first place.)
Since this required me to yet again put in a growing array, I finally
abstracted that out into a set of ast_vector macros in
asterisk/vector.h.
Review: https://reviewboard.asterisk.org/r/2883/
........
r400181 | dlee | 2013-09-30 13:48:57 -0500 (Mon, 30 Sep 2013) | 28 lines
Remove dispatch object allocation from Stasis publishing
While looking for areas for performance improvement, I realized that an
unused feature in Stasis was negatively impacting performance.
When a message is sent to a subscriber, a dispatch object is allocated
for the dispatch, containing the topic the message was published to, the
subscriber the message is being sent to, and the message itself.
The topic is actually unused by any subscriber in Asterisk today. And
the subscriber is associated with the taskprocessor the message is being
dispatched to.
First, this patch removes the unused topic parameter from Stasis
subscription callbacks.
Second, this patch introduces the concept of taskprocessor local data,
data that may be set on a taskprocessor and provided along with the data
pointer when a task is pushed using the ast_taskprocessor_push_local()
call. This allows the task to have both data specific to that
taskprocessor, in addition to data specific to that invocation.
With those two changes, the dispatch object can be removed completely,
and the message is simply refcounted and sent directly to the
taskprocessor.
Review: https://reviewboard.asterisk.org/r/2884/
........
Merged revisions 399887,400138,400178,400180-400181 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@400186 65c4cc65-6c06-0410-ace0-fbb531ad65f3
RTCP's calculation of the number of lost packets in an RTP stream is based on
that stream's sequence number count, the number of received packets, and how
many packets we expect to receive. When the SSRC for an RTP stream changes,
there can - and almost always will be - a large jump in the next packet's
timestamp and sequence number. If we don't reset the number of received
packets, sequence number count, and other metrics used by RTCP, the next RR/SR
report will use the previous SSRC's values to calculate the lost packet count
for the new SSRC - resulting in a very large number of lost packets.
This patch modifies res_rtp_asterisk such that, if it detects a SSRC change, it
will reset the various values used by the RTCP calculations. From the
perspective of RTCP, this appears as a new media stream - which is what it is.
Review: https://reviewboard.asterisk.org/r/2886/
(closes issue AST-1174)
Reported by: Thomas Arimont
........
Merged revisions 400089 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 400093 from http://svn.asterisk.org/svn/asterisk/branches/11
........
Merged revisions 400108 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@400117 65c4cc65-6c06-0410-ace0-fbb531ad65f3
There was a collision of mod_data use on the transaction between using a nat
hook and an session response callback. During state change it was assumed
what was in the mod_data was nothing or the response callback. However, it
was possible for it to also contain a nat hook thus resulting in a bad cast
and a crash.
Added the ability to store multiple data elements in mod_data via a hash table.
In this instance, mod_data now stores a hash table of the two values that can
be retrieved using an associated string key.
(closes issue ASTERISK-22394)
Reported by: Rusty Newton
Review: https://reviewboard.asterisk.org/r/2843/
........
Merged revisions 399990 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@399991 65c4cc65-6c06-0410-ace0-fbb531ad65f3
While handling a registration request a race condition could occur if/when two+
clients registered at the same time. This happened when one request obtained a
copy of the current contacts for an AOR and another request did the same before
the first request updated. Thus the second would update and overwrite the first
(or vice-versa depending on which actually updated first). In the case of it
being the same contact two "add" events would be raised.
pjsip registration handling is now serialized to alleviate this issue.
(closes issue AST-1213)
Reported by: John Bigelow
Review: https://reviewboard.asterisk.org/r/2860/
........
Merged revisions 399897 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@399898 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Re-using some of Mark Michelson's text from an E-mail discussion for:
* Modifying synopsis for both options
* Adding description to both options
* Changing name of "external_media_address" for Endpoint configuration to "media_address" in anticipation of the option name being changed. (As it is not really specific to external destinations)
(issue ASTERISK-22405)
(closes issue ASTERISK-22405)
Reported by: Rusty Newton
Review: https://reviewboard.asterisk.org/r/2850/
........
Merged revisions 399781 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@399782 65c4cc65-6c06-0410-ace0-fbb531ad65f3
During load time in res_pjsip if an error occurred the operation would attempt to rollback all
operations done during load. This is not permitted by PJSIP as it will assert if the operation has
not been done. This fix changes the code so it will only rollback what has been initialized already.
Further changes also prevent res_pjsip and res_pjsip_session from being unloaded. This is due to
limitations within PJSIP itself. The library environment can only be changed to a certain extent
and does not provide the ability, currently, to deinitialize certain required functionality.
(closes issue ASTERISK-22474)
Reported by: Corey Farrell
........
Merged revisions 399624 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@399625 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Moved rtcp_report RAII_VAR declaration into the loop so it is unref'ed
after every loop. Moved message_blob to loop and switched it to a regular
variable. The regular variable was used since message_blob is used in a
very contained way.
(closes issue ASTERISK-22565)
Reported by: Corey Farrell
Patches:
rtcp_report-leak.patch (license #5909) patch uploaded by Corey Farrell
Tested by: Corey Farrell
........
Merged revisions 399607 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@399608 65c4cc65-6c06-0410-ace0-fbb531ad65f3
pjsip's message technology was being registered as 'sip', which was causing it
to not load due it conflicting with chan_sip's registered 'sip' technology for
messaging. It now registers as 'pjsip'. However, due to this change the "to"
field for outgoing pjsip messages need to be prefixed with 'pjsip:' instead of
'sip:'. Incoming messages to res_pjsip_messaging will automatically have their
"to" fields altered in order to accommodate the change. Outgoing messages also
handle changing it back to 'sip' before being sent so the pjsip library will
properly handle it.
(closes issue ASTERISK-22445)
Reported by: Matt Jordan
Review: https://reviewboard.asterisk.org/r/2833/
........
Merged revisions 399339 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@399340 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The endpoint option does not apply to communication with external entities. Rather,
the option is applied to all communications with the endpoint. The external_media_address
transport configuration option may override the endpoint option if it turns out that
we are going to be communicating with an external entity.
Two things of note:
1) I have not updated the XML documentation. This is being taken care of by Rusty as part
of his work on issue ASTERISK-22405
2) This commit is likely to cause testsuite failures since there are tests that use the
external_media_address endpoint option, and they will need to be changed over. Well, I'm
planning to get that updated ASAP after this commit.
(closes issue ASTERISK-22528)
reported by Rusty Newton
........
Merged revisions 399283 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@399284 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Fixes regression introduced by -r374096.
* Made res_speech.export.in export ast_* symbols instead of specific
functions.
* Made app_speech_utils.c declare that it is dependent upon res_speech.
(issue ASTERISK-17136)
Reported by: Richard Kenner
........
Merged revisions 399197 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@399198 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The Dial, Queue, and FollowMe applications need to inhibit the bridging
initial connected line exchange in order to support the 'I' option.
* Replaced the pass_reference flag on ast_bridge_join() with a flags
parameter to pass other flags defined by enum ast_bridge_join_flags.
* Replaced the independent flag on ast_bridge_impart() with a flags
parameter to pass other flags defined by enum ast_bridge_impart_flags.
* Since the Dial, Queue, and FollowMe applications are now the only
callers of ast_bridge_call() and ast_bridge_call_with_flags(), changed the
calling contract to require the initial COLP exchange to already have been
done by the caller.
* Made all callers of ast_bridge_impart() check the return value. It is
important. As a precaution, I also made the compiler complain now if it
is not checked.
* Did some cleanup in parking_tests.c as a result of checking the
ast_bridge_impart() return value.
An independent, but associated change is:
* Reduce stack usage in ast_indicate_data() and add a dropping redundant
connected line verbose message.
(closes issue ASTERISK-22072)
Reported by: Joshua Colp
Review: https://reviewboard.asterisk.org/r/2845/
........
Merged revisions 399136 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@399138 65c4cc65-6c06-0410-ace0-fbb531ad65f3
With this change, if no realm is specified in an outbound auth
section, then we will simply match the realm that was present
in the 401/407 challenge.
(closes issue ASTERISK-22471)
Reported by George Joseph
(closes issue ASTERISK-22386)
Reported by Rusty Newton
Patches:
outbound_auth_realm_v4.patch uploaded by George Joseph (License #6322)
........
Merged revisions 399059 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@399082 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch uses PJSIP's pj_log_set_log_func() to forward PJSIP's log
messages to Asterisk's logger. This is done in a new module:
res_pjsip_log_forwarder.so.
This patch sets defaultenabled on the existing res_pjsip_logger.so to
no, since logging every SIP packet seems a bit odd to do by default, and
is (hopefully) less necessary with regular PJSIP logging.
It also removes res_rtp_asterisk's disabling of PJSIP logging.
(closes issue ASTERISK-22360)
Reported by: Joshua Colp
Review: https://reviewboard.asterisk.org/r/2830/
........
Merged revisions 399049 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@399051 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When I moved the ARI WebSocket from /ws to /ari/events, I added code to
allow a WebSocket to connect without specifying the subprotocol if
there's only one subprotocol handler registered for the WebSocket.
Naively, I coded it to always respond with the subprotocol in use.
Unfortunately, according to RFC 6455, if the server's response includes
a subprotocol header field that "indicates the use of a subprotocol that
was not present in the client's handshake [...], the client MUST _Fail
the WebSocket Connection_.", emphasis theirs.
This patch correctly omits the Sec-WebSocket-Protocol if one is not
specified by the client.
(closes issue ASTERISK-22441)
Review: https://reviewboard.asterisk.org/r/2828/
........
Merged revisions 399039 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@399042 65c4cc65-6c06-0410-ace0-fbb531ad65f3
* One bug fix. Made the synopsis for "type" to accurate.
* changing the usage of "IP-domains" to "IP addresses"
* clarifying the usage for the options, by adding a relevant description for
each
* modified other areas of the XML help for clarity, such as the module
description and a few synopsis changes here and there. See the patch.
(issue ASTERISK-22458)
(closes issue ASTERISK-22458)
Reported By: Rusty Newton
Review: https://reviewboard.asterisk.org/r/2823/
........
Merged revisions 399017 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@399018 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Connected line updates are now only sent out if an actual update needs to occur.
This happens under the following conditions:
1. The endpoint we are sending to is trusted.
2. Either a P-Asserted-Identity or Remote Party-ID header needs to be added/sent.
3. The connected id's number and name are valid.
Also added an SDP when an update is sent out.
(closes issue AST-1212)
Reported by: John Bigelow
Review: https://reviewboard.asterisk.org/r/2831/
........
Merged revisions 398806 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@398808 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Sometimes the Google Voice servers have a bad habit of sending out 1
byte replies to the xmpp resource. When a blank 1 byte reply is
received from the socket the buffer attempts to wait (endlessly) for
the rest of the reply from google which effectively blocks the socket
and google voice calls will no longer come into the server.
This patch allows the xmpp module to correctly detect empty packets and
send out ping replies to google. It also sets a socket timeout on the
default socket which prevents the xmpp socket from closing and
preventing future google voice calls from coming into the server.
Furthermore instead of sending an empty reply back to google we send a
proper xmpp ping reply back. This also adds several more
socket messages.
(closes issue ASTERISK-22347)
Reported by: Andrew Nagy
Review: https://reviewboard.asterisk.org/r/2771
Patches:
xmpp_fix_1.diff uploaded by Andrew Nagy (License #6524)
........
Merged revisions 398618 from http://svn.asterisk.org/svn/asterisk/branches/11
........
Merged revisions 398619 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@398620 65c4cc65-6c06-0410-ace0-fbb531ad65f3
........
r398558 | kmoore | 2013-09-06 14:28:16 -0500 (Fri, 06 Sep 2013) | 17 lines
Fix Jabber/XMPP distributed MWI
The mailbox and context are swapped on the receiving end for all users
of Jabber and XMPP distributed MWI in Asterisk 1.8 and all more recent
versions. This swaps those values to be correct when publishing to the
internal event system from Jabber/XMPP distributed MWI state.
(closes issue ASTERISK-22435)
Reported by: abelbeck
Tested by: Michael Keuter
Patches:
asterisk-1.8-res_jabber-aji_handle_pubsub_event.patch uploaded by abelbeck
asterisk-11-res_xmpp-xmpp_pubsub_handle_event.patch uploaded by abelbeck
........
Merged revisions 398523 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
r398577 | kmoore | 2013-09-06 16:00:56 -0500 (Fri, 06 Sep 2013) | 10 lines
Commit the remainder of r398523
This is a missing part of the commit in revision 398523 that corrects
the name of a variable.
(issue ASTERISK-22435)
........
Merged revisions 398576 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 398558,398577 from http://svn.asterisk.org/svn/asterisk/branches/11
........
Merged revisions 398580 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@398603 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When AST_DEVMODE is not defined, ast_asserts are not compiled into the
binary. In some cases, this means variables are not referenced or are
set but unused which causes warnings to show up.
(closes issue ASTERISK-22446)
Reported by: Jason Parker (qwell)
........
Merged revisions 398521 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@398522 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Some configuration objects currently won't place nice if reloaded.
Specifically, in this case the pjsip transport objects. Now when
registering an object in sorcery one may specify that the object is
allowed to be reloaded or not. If the object is set to not reload
then upon reloading of the configuration the objects of that type
will not be reloaded. The initially loaded objects of that type
however will remain.
While the transport objects will not longer be reloaded it is still
possible for a user to configure an endpoint to an invalid transport.
A couple of log messages were added to help diagnose this problem if
it occurs.
(closes issue ASTERISK-22382)
Reported by: Rusty Newton
(closes issue ASTERISK-22384)
Reported by: Rusty Newton
Review: https://reviewboard.asterisk.org/r/2807/
........
Merged revisions 398139 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@398140 65c4cc65-6c06-0410-ace0-fbb531ad65f3
