Writing to a file in the wav49 format performs rather inefficiently. The
procedure is approximately:
(1) Write GSM frame to the end of the file
(2) Seek to the end of the file
(3) Seek to the header
(4) Update the file size
(5) Seek (again) to the end of the file
(6) Repeat
This pattern negates any attempt to use the stdio buffering setup in
ast_writefile. It also results in many small writes that require a seek going
to the disk each second which translates to poor disk performance on certain
file systems, particularly when there are multiple wav49 files being written
simultaneously.
(closes issue ASTERISK-19595)
Reported by: Byron Clark
Tested by: Byron Clark
patches:
gsm_wav_only_update_header_on_close.patch uploaded by byronclark (License 6157)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@396412 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Update title that was left behind many years ago. Used revision 6596 as my guide for what it should be.
(issue ASTERISK-20259)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@375007 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch fixes numerous doxygen warnings across Asterisk. It also updates
the makefile to regenerate the doxygen configuration on the local system
before running doxygen to help prevent warnings/errors on the local system.
Much thanks to Andrew for tackling one of the Asterisk janitor projects!
(issue ASTERISK-20259)
Reported by: Andrew Latham
Patches:
doxygen_partial.diff uploaded by Andrew Latham (license 5985)
make_progdocs.diff uploaded by Andrew Latham (license 5985)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@371989 65c4cc65-6c06-0410-ace0-fbb531ad65f3
A very inappropriate placement of a ')' (introduced in r362151) caused the
maximum size of a file to be set as the result of a comparison operation, as
opposed to the result of the ftello operation. This resulted in seeking being
restricted to the beginning of the file, or 1 byte into the file. Thanks to
the Asterisk Test Suite for properly freaking out about this on at least one
test.
(issue ASTERISK-19655)
Reported by: Matt Jordan
........
Merged revisions 362304 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 362305 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@362306 65c4cc65-6c06-0410-ace0-fbb531ad65f3
For the formats that support seek and/or truncate operations, many of
the C library calls used to determine or set the current position indicator
in the file stream were not being checked. In some situations, if an error
occurred, a negative value would be returned from the library call. This
could then be interpreted inappropriately as positional data.
This patch checks the return values from these library calls before
using them in subsequent operations.
(issue ASTERISK-19655)
Reported by: Matt Jordan
Review: https://reviewboard.asterisk.org/r/1863/
........
Merged revisions 362151 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 362152 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@362153 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The principle difference between libvorbisfile v1.1.2 and newer (at least
v1.2.0) is the addition of the predefined callbacks OV_CALLBACKS_xxx in
vorbis/vorbisfile.h used for ov_open_callbacks().
* Updated the configure script to detect if libvorbisfile.h declares
OV_CALLBACKS_NOCLOSE.
* Copied the declaration of OV_CALLBACKS_NOCLOSE from v1.2.0 to allow
v1.1.2 to compile.
(closes issue ASTERISK-19370)
Reported by: Jonn Taylor
........
Merged revisions 355608 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 355620 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@355621 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Ogg/vorbis was fairly useless as a voicemail file format because it did
not implement the seek and tell format callbacks among other problems.
Since we were already using the libvorbis and libvorbisenc libraries we
can use libvorbisfile as it is also part of the vorbis library package.
* Made use the libvorbisfile to handle the ogg/vorbis file stream. The
format_ogg_vorbis.c is now mostly a wrapper around libvorbisfile.
(closes issue ASTERISK-16926)
Reported by: sque
Patches:
ogg_vorbis_use_libvorbisfile.patch (license #6108) patch uploaded by sque
........
Merged revisions 355365 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 355375 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@355376 65c4cc65-6c06-0410-ace0-fbb531ad65f3
It was inconsistent to have the silk and celt format attribute
modules in the format file interpreter folder.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@327116 65c4cc65-6c06-0410-ace0-fbb531ad65f3
-Functional changes
1. Dynamic global format list build by codecs defined in codecs.conf
2. SILK 8khz, 12khz, 16khz, and 24khz with custom attributes defined in codecs.conf
3. Negotiation of SILK attributes in chan_sip.
4. SPEEX 32khz with translation
5. SLINEAR 8khz, 12khz, 24khz, 32khz, 44.1khz, 48khz, 96khz, 192khz with translation
using codec_resample.c
6. Various changes to RTP code required to properly handle the dynamic format list
and formats with attributes.
7. ConfBridge now dynamically jumps to the best possible sample rate. This allows
for conferences to take advantage of HD audio (Which sounds awesome)
8. Audiohooks are no longer limited to 8khz audio, and most effects have been
updated to take advantage of this such as Volume, DENOISE, PITCH_SHIFT.
9. codec_resample now uses its own code rather than depending on libresample.
-Organizational changes
Global format list is moved from frame.c to format.c
Various format specific functions moved from frame.c to format.c
Review: https://reviewboard.asterisk.org/r/1104/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@308582 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch is the foundation of an entire new way of looking at media in Asterisk.
The code present in this patch is everything required to complete phase1 of my
Media Architecture proposal. For more information about this project visit the link below.
https://wiki.asterisk.org/wiki/display/AST/Media+Architecture+Proposal
The primary function of this patch is to convert all the usages of format
bitfields in Asterisk to use the new format and format_cap APIs. Functionally
no change in behavior should be present in this patch. Thanks to twilson
and russell for all the time they spent reviewing these changes.
Review: https://reviewboard.asterisk.org/r/1083/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@306010 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Updated the doxygen \arg line after looking at the file for some other Asterisk documentation
and noticing they weren't up to date. Thanks to seanbright for looking at the code for me :)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@257988 65c4cc65-6c06-0410-ace0-fbb531ad65f3
A recent change to app_voicemail made it such that the module now assumes that
all format modules are available while processing voicemail configuration.
However, when autoloading modules, it was possible that app_voicemail was
loaded before the format modules. Since format modules don't depend on
anything, set a module load priority on them to ensure that they get loaded
first when autoloading.
This fix applies to trunk, 1.6.1, and 1.6.2. The fix for 1.4 and 1.6.0 will
require a different approach since the module load priority functionality is
not present in the module API.
(issue #16412)
Reported by: jiddings
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@233692 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch adds 'const' tags to a number of Asterisk APIs where they are appropriate (where the API already demanded that the function argument not be modified, but the compiler was not informed of that fact). The list includes:
- CLI command handlers
- CLI command handler arguments
- AGI command handlers
- AGI command handler arguments
- Dialplan application handler arguments
- Speech engine API function arguments
In addition, various file-scope and function-scope constant arrays got 'const' and/or 'static' qualifiers where they were missing.
Review: https://reviewboard.asterisk.org/r/251/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@196072 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch adds passthrough, file recording and file playback support for the codecs listed above, with negotiation over SIP/SDP supported. Due to Asterisk's current limitation of treating a codec/bitrate combination as a unique codec, only G.722.1 at 32 kbps and G.722.1C at 48 kbps are supported.
Along the way, some related work was done:
1) The rtpPayloadType structure definition, used as a return result for an API call in rtp.h, was moved from rtp.c to rtp.h so that the API call was actually usable. The only previous used of the API all was chan_h323.c, which had a duplicate of the structure definition instead of doing it the right way.
2) The hardcoded SDP sample rates for various codecs in chan_sip.c were removed, in favor of storing these sample rates in rtp.c along with the codec definitions there. A new API call was added to allow retrieval of the sample rate for a given codec.
3) Some basic 'a=fmtp' parsing for SDP was added to chan_sip, because chan_sip *must* decline any media streams offered for these codecs that are not at the bitrates that we support (otherwise Bad Things (TM) would result).
Review: http://reviewboard.digium.com/r/158/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@175508 65c4cc65-6c06-0410-ace0-fbb531ad65f3
- make data member of the ast_frame struct a named union instead of a void
Recently the ast_queue_hangup function got a new parameter, the hangupcause
Feedback came in that this is no good and that instead a new function should be created.
This I did.
The hangupcause was stored in the seqno member of the ast_frame struct. This is not very
elegant, and since there's already a data member that one should be used.
Problem is, this member was a void *.
Now it's a named union so it can hold a pointer, an uint32 and there's a padding in case someone
wants to store another type in there in the future.
This commit is so massive, because all ast_frame.data uses have to be
altered to ast_frame.data.data
Thanks russellb and kpfleming for the feedback.
(closes issue #12674)
Reported by: mvanbaak
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@117802 65c4cc65-6c06-0410-ace0-fbb531ad65f3