https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r114112 | mmichelson | 2008-04-14 11:24:22 -0500 (Mon, 14 Apr 2008) | 9 lines
If the datastore has been moved to another channel due to a masquerade, then
freeing the datastore here causes an eventual double free when the new channel
hangs up. We should only free the datastore if we were able to successfully remove
it from the channel we are referencing (i.e. the datastore was not moved).
(closes issue #12359)
Reported by: pguido
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@114113 65c4cc65-6c06-0410-ace0-fbb531ad65f3
those XXX comments from the code.
The redundancy occurs because the 'single' flag implies that the 'r' and 'm' flags are
not set, so there's no need to explicitly check them again.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@107530 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Reported by: rizzo
Tested by: murf
Proposal of the changes to be made, and then an announcement of how they were accomplished:
http://lists.digium.com/pipermail/asterisk-dev/2008-February/032065.html
and:
http://lists.digium.com/pipermail/asterisk-dev/2008-March/032124.html
Here is a recap, file by file, of what I have done:
pbx/pbx_config.c
pbx/pbx_ael.c
All funcs that were passed a ptr to the context list, now will ALSO be passed a hashtab ptr to the same set.
Why? because (for the time being), the dialplan is stored in both, to facilitate a quick, low-cost move to
hash-tables to speed up dialplan processing. If it was deemed necessary to pass the context LIST, well, it
is just as necessary to have the TABLE available. This is because the list/table in question might not be
the global one, but temporary ones we would use to stage the dialplan on, and then swap into the global
position when things are ready.
We now have one external function for apps to use, "ast_context_find_or_create()" instead of the pre-existing
"find" and "create", as all existing usages used both in tandem anyway.
pbx_config, and pbx_ael, will stage the reloaded dialplan into local lists and tables, and
then call merge_contexts_and_delete, which will merge (now) existing contexts and
priorities from other registrars into this local set by copying them. Then, merge_contexts_and_delete will
lock down the contexts, swap the lists and tables, and unlock (real quick), and then
destroy the old dialplan.
chan_sip.c
chan_iax.c
chan_skinny.c
All the channel drivers that would add regcontexts now use the ast_context_find_or_create now.
chan_sip also includes a small fix to get rid of warnings about removing priorities that never got entered.
apps/app_meetme.c
apps/app_dial.c
apps/app_queue.c
All the apps that added a context/exten/priority were also modified to use ast_context_find_or_create instead.
include/asterisk/pbx.h
ast_context_create() is removed. Find_or_create_ is the new method.
ast_context_find_or_create() interface gets the hashtab added.
ast_merge_contexts_and_delete() gets the local hashtab arg added.
ast_wrlock_contexts_version() is added so you can detect if someone else got a writelock between your readlocking and writelocking.
ast_hashtab_compare_contexts was made public for use in pbx_config/pbx_ael
ast_hashtab_hash_contexts was in like fashion make public.
include/asterisk/pval.h
ast_compile_ael2() interface changed to include the local hashtab table ptr.
main/features.c
For the sake of the parking context, we use ast_context_find_or_create().
main/pbx.c
I changed all the "tree" names to "table" instead. That's because the original
implementation was based on binary trees. (had a free library). Then I moved
to hashtabs. Now, the names move forward too.
refcount field added to contexts, so you can keep track of how many modules
wanted this context to exist.
Some log messages that are warnings were inflated from LOG_NOTICE to LOG_WARNING.
Added some calls to ast_verb(3,...) for debug messages
Lots of little mods to ast_context_remove_extension2, which is now excersized in ways
it was not previously; one definite bug fixed.
find_or_create was upgraded to handle both local lists/tables as well as the globals.
context_merge() was added to do the per-context merging of the old/present contexts/extens/prios into the new/proposed local list/tables
ast_merge_contexts_and_delete() was heavily modified.
ast_add_extension2() was also upgraded to handle changes.
the context_destroy() code was re-engineered to handle the new way of doing things,
by exten/prio instead of by context.
res/ael/pval.c
res/ael/ael.tab.c
res/ael/ael.tab.h
res/ael/ael.y
res/ael/ael_lex.c
res/ael/ael.flex
utils/ael_main.c
utils/extconf.c
utils/conf2ael.c
utils/Makefile
Had to change the interface to ast_compile_ael2(), to include the hashtab ptr.
This ended up involving several external apps. The main gotcha was I had to
include lock.h and hashtab.h in several places.
As a side note, I tested this stuff pretty thoroughly, I replicated the problems
originally reported by Luigi, and made triply sure that reloads worked, and everything
worked thru "stop gracefully". I found a and fixed a few bugs as I was merging into
trunk, that did not appear in my tests of bug6002.
How's this for verbose commit messages?
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@106757 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r91783 | russell | 2007-12-07 10:38:48 -0600 (Fri, 07 Dec 2007) | 6 lines
* Add channel locking around datastore operations that expect the channel
to be locked.
* Document why we don't record Local channels in the dialed interfaces list.
* Remove the dialed variable as it isn't needed.
* Restructure some code for clarity and coding guidelines stuff
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@91784 65c4cc65-6c06-0410-ace0-fbb531ad65f3
- Event Dial has new headers, to comply with other events
- Source -> Channel Channel name (caller)
- SrcUniqueID -> UniqueID Uniqueid
(new) -> Dialstring Dialstring in app data
(moremanager)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@91407 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r91273 | mmichelson | 2007-12-05 16:35:52 -0600 (Wed, 05 Dec 2007) | 11 lines
The 'G' option for Dial() did not properly handle the case where only a label was
provided. This was due to the fact that the answering channel did not have an extension
set, so ast_parseable_goto would fail. This fix eliminates the call to ast_parseable_goto
on the answering channel since it is a wasteful call. The answering channel and the calling
channel are both directed to the same extension and context, just different priorities, so
we can just copy the values from the calling channel to the answering channel and increment
the answering channel's priority.
(closes issue #11382, reported by jon, patch by me with correction by jon)
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@91291 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r90735 | mmichelson | 2007-12-03 17:12:17 -0600 (Mon, 03 Dec 2007) | 22 lines
A big one...
This is the merge of the forward-loop branch. The main change here is that call-forwards can no longer loop.
This is accomplished by creating a datastore on the calling channel which has a linked list of all devices
dialed. If a forward happens, then the local channel which is created inherits the datastore. If, through this
progression of forwards and datastore inheritance, a device is attempted to be dialed a second time, it will simply
be skipped and a warning message will be printed to the CLI. After the dialing has been completed, the datastore
is detached from the channel and destroyed.
This change also introduces some side effects to the code which I shall enumerate here:
1. Datastore inheritance has been backported from trunk into 1.4
2. A large chunk of code has been removed from app_dial. This chunk is the section of code
which handles the call forward case after the channel has been requested but before it has
been called. This was removed because call-forwarding still works fine without it, it makes the
code less error-prone should it need changing, and it made this set of changes much less painful
to just have the forwarding handled in one place in each module.
3. Two new files, global_datastores.h and .c have been added. These are necessary since the datastore
which is attached to the channel may be created and attached in either app_dial or app_queue, so they
need a common place to find the datastore info. This approach was taken in case similar datastores are
needed in the future, there will be a common place to add them.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@90873 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This works in much the same way as the automonitor, except that instead of using the monitor
app, it uses the mixmonitor app. By providing an 'x' or 'X' as a dial or queue option, a DTMF
sequence may be entered (as defined in features.conf) to start the one-touch mixmonitor.
This patch also introduces some new API calls to the audiohooks code for searching for an audiohook
by type and for searching for a running audiohook by type.
Big thanks to joetester for writing the initial patch, testing it and patiently waiting for it to
be committed.
(closes issue #10185, reported and patched by xmarksthespot)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@90388 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r89622 | murf | 2007-11-26 23:24:02 -0700 (Mon, 26 Nov 2007) | 1 line
closes issue #11379; OK, this is an attempt to make both sides happy. To the cdr.conf file, I added the option 'unanswered', which defaults to 'no'. In this mode, you will see a cdr for a call, whether it was answered or not. The disposition will be NO ANSWER or ANSWERED, as appropriate. The src is as you'd expect, the destination channel will be one of the channels from the Dial() call, usually the last in the list if more than one chan was specified. With unanswered set to 'yes', you will still see this cdr entry in both cases. But in the case where the dial timed out, you will also see a cdr for each line attempted, marked NO ANSWER, with no destination channel name. The new option defaults to 'no', so you don't see the pesky extra cdr's by default, and you will not see the irritating 'not posted' messages.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@89623 65c4cc65-6c06-0410-ace0-fbb531ad65f3
build times - tested, there is no measureable difference before and
after this commit.
In this change:
use asterisk/compat.h to include a small set of system headers:
inttypes.h, unistd.h, stddef.h, stddint.h, sys/types.h, stdarg.h,
stdlib.h, alloca.h, stdio.h
Where available, the inclusion is conditional on HAVE_FOO_H as determined
by autoconf.
Normally, source files should not include any of the above system headers,
and instead use either "asterisk.h" or "asterisk/compat.h" which does it
better.
For the time being I have left alone second-level directories
(main/db1-ast, etc.).
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@89333 65c4cc65-6c06-0410-ace0-fbb531ad65f3
using old methods of parsing arguments to using the standard macros. However, the big
change is that the really old way of specifying application and arguments separated by
a comma will no longer work (e.g. NoOp,foo|bar). Instead, the way that has been
recommended since long before 1.0 will become the only method available (e.g. NoOp(foo,bar).
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@76703 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r75253 | mmichelson | 2007-07-16 13:16:15 -0500 (Mon, 16 Jul 2007) | 8 lines
Restoring functionality from 1.2 wherein Retrydial will not exit if there is no announce file specified.
This change makes it so that if there is no announce file specified, the application will continue until finished (or caller hangs up).
If a bogus announce file is specified, then a warning message will be printed saying that the file could not be found, but execution will
still continue.
(closes issue #10186, reported by jon, patched by me)
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@75254 65c4cc65-6c06-0410-ace0-fbb531ad65f3