press DTMF digits to switch between spying modes. Pressing 4 activates spy mode,
pressing 5 activates whisper mode, and pressing 6 activates barge mode. Use of
this feature overrides the normal operation of DTMF numbers.
This feature is courtesy of Switchvox.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@116522 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The behavior in 1.4 was that it would use the current context if an exitcontext existed.
(closes issue #12605)
Reported by: kenjreno
Patches:
12605-starexit.diff uploaded by qwell (license 4)
Tested by: file
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@116407 65c4cc65-6c06-0410-ace0-fbb531ad65f3
marked "urgent" are considered to be higher priority than other messages
and so they will be played before any other messages in a user's mailbox.
There are two ways to leave an urgent message.
1. send the 'U' option to VoiceMail().
2. Set review=yes in voicemail.conf. This will give instructions for
a caller to mark a message as urgent after the message has been recorded.
I have tested that this works correctly with file and ODBC storage, and James
Rothenberger (who wrote initial support for this feature) has tested its use
with IMAP storage.
(closes issue #11817)
Reported by: jaroth
Based on branch http://svn.digium.com/svn/asterisk/team/jrothenberger/asterisk-urgent
Tested by: putnopvut, jaroth
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@115588 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r115320 | mmichelson | 2008-05-05 16:41:34 -0500 (Mon, 05 May 2008) | 13 lines
Don't consider a caller "handled" until the caller is bridged with
a queue member. There was too much of an opportunity for the member
to hang up (either during a delay, announcement, or overly long
agi) between the time that he answered the phone and the time when
he actually was bridged with the caller. The consequence of this
was that if the member hung up in that interval, then proper
abandonment details would not be noted in the queue log if the caller
were to hang up at any point after the member hangup.
(closes issue #12561)
Reported by: ablackthorn
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@115321 65c4cc65-6c06-0410-ace0-fbb531ad65f3
to announce-position, "limit" and "more," as well as a new option,
announce-position-limit. For more information on the use of these options,
see CHANGES or configs/queues.conf.sample.
(closes issue #10991)
Reported by: slavon
Patches:
app_q.diff uploaded by slavon (license 288)
Tested by: slavon, putnopvut
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@114906 65c4cc65-6c06-0410-ace0-fbb531ad65f3
since another thread could remove them.
(closes issue #12541)
Reported by: snuffy
Patches:
bug_12156_apps.diff uploaded by snuffy (license 35)
Several additional changes by me
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@114904 65c4cc65-6c06-0410-ace0-fbb531ad65f3
a colon-delimited list of spygroups to be specified when calling the ChanSpy application
with the 'g' option. Prior to this, you could only specify a single group when using the
'g' option.
I also have upped the maximum number of spygroups to 128 and added a #define so that this
can be easily increased or decreased later.
(closes issue #12497)
Reported by: jsmith
Patches:
app_chanspy_multiple_groups_v2.patch uploaded by jsmith (license 15)
Tested by: atis, jvandal
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@114857 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r114848 | mmichelson | 2008-04-29 14:40:06 -0500 (Tue, 29 Apr 2008) | 14 lines
Use the MACRO_CONTEXT and MACRO_EXTEN channel variables instead of the channel's macrocontext
and macroexten fields. This is needed because if macros are daisy-chained, the incorrect
context and extension are placed on the new channel. I also added locking to the channel prior
to accessing these variables as noted in trunk's janitor project file.
(closes issue #12549)
Reported by: darren1713
Patches:
app_queue.c.macroextenpatch uploaded by darren1713 (license 116)
(with modifications from me)
Tested by: putnopvut
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@114849 65c4cc65-6c06-0410-ace0-fbb531ad65f3
functions in app_directory can be removed since the ODBC-specific lookups are accomplished
within app_voicemail. This change greatly reduces the amount of lines in app_directory that
were solely for the purpose of looking up a name when ODBC_STORAGE is specified for voicemail.
This commit also makes the name-saying interruptable via DTMF.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@114834 65c4cc65-6c06-0410-ace0-fbb531ad65f3
party to be spoken instead of the channel name or number.
This was accomplished by adding a new function pointer to point to a function in app_voicemail
which retrieves the name file and plays it. This makes for an easy way that applications may play
a user's name should it be necessary. app_directory, in particular, can be simplified greatly by
this change.
This change comes as a suggestion from Switchvox, which already has this feature. AST-23
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@114813 65c4cc65-6c06-0410-ace0-fbb531ad65f3
barge on the call. It is like the existing whisper option, except that
it allows the spy to talk to both sides of the conversation on which
he is spying.
This feature has existed in Switchvox, and this merges the functionality
into Asterisk.
(AST-32)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@114678 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Initially, this was to be a new feature, with a patch from Switchvox,
but after discussions, it was noted that this feature already existed in trunk.
The resulting discussions ended in a comment that was along the lines of
"the patch provided here is a lot smaller than what is already in trunk,
because it doesn't create a new application and duplicate existing code"
It was decided that these two applications could be easily merged to reduce
code duplication. SO, that's what this does.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@114660 65c4cc65-6c06-0410-ace0-fbb531ad65f3
if using IMAP storage for voicemail. The comment will be recorded and attached
as a second attachment in addition to the original message. This will be invoked
if you choose to prepend a message the way you would with file or ODBC storage
(closes issue #12028)
Reported by: jaroth
Patches:
forward_with_comment_v2.patch uploaded by jaroth (license 50)
Tested by: jaroth
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@114656 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r114597 | russell | 2008-04-23 15:49:18 -0500 (Wed, 23 Apr 2008) | 10 lines
Fix an issue that caused getting the correct next channel to not always work.
Also, remove setting the amount of time to wait for a digit from 5 seconds back
down to 1/10 of a second. I believe this was so the beep didn't get played over
and over really fast, but a while back I put in another fix for that issue.
(closes issue #12498)
Reported by: jsmith
Patches:
app_chanspy_channel_walk.trunk.patch uploaded by jsmith (license 15)
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@114598 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This fixes a bug that was thought to be fixed already.
app_voicemail, if using IMAP_STORAGE, has a problem because
the IMAP header files include syslog.h, which define LOG_WARNING
and LOG_DEBUG to be different than what Asterisk uses for those
same macros. This was "fixed" in the past by including all the
IMAP header files prior to including asterisk.h. This fix worked...
unless you were to try to compile with MALLOC_DEBUG. MALLOC_DEBUG
prepends the inclusion of astmm.h to every file, which means that no
matter what order the includes are in in app_voicemail, the unexpected
values for LOG_WARNING and LOG_DEBUG will be in place.
The action taken for this fix was to define AST_LOG_* macros in addition
to the LOG_* macros already defined. These new macros are used in app_voicemail.c,
logger.h, and astobj.h right now, and their use will be encouraged in the future.
In consideration of those who have written third-party modules which use
the LOG_* macros, these will NOT be removed from the source, however future use
of these macros is discouraged.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@114577 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This makes IMAP_STORAGE include the proper headers if you
have specified the "system" option for --with-imap when running
the configure script and your IMAP-related headers exist in
/usr/include/c-client.
This change is due to a hasty merge of a 1.4 change I made.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@114575 65c4cc65-6c06-0410-ace0-fbb531ad65f3
a custom client name. Using the channel name is still the default. This was done
at the request of Jared Smith.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@114533 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Reported by: oej
Tested by: jpeeler
This patch implements multiple parking lots for parked calls. The default parkinglot is used by default, however setting the channel variable PARKINGLOT in the dialplan will allow use of any other configured parkinglot. See configs/features.conf.sample for more details on setting up another non-default parkinglot. Also, one can (currently) set the default parkinglot to use in the driver configuration file via the parkinglot option.
Patch initially written by oej, brought up to date and finalized by mvanbaak, and then stabilized and converted to astobj2 by me.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@114487 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r114226 | mmichelson | 2008-04-17 16:03:29 -0500 (Thu, 17 Apr 2008) | 9 lines
Declaration of the peer channel in this scope was making it so the peer variable defined
in the outer scope was never set properly, therefore making iterating through the channel
list always restart from the beginning. This bug would have affected anyone who called
chanspy without specifying a first argument.
(closes issue #12461)
Reported by: stever28
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@114227 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r114133 | qwell | 2008-04-15 11:18:08 -0500 (Tue, 15 Apr 2008) | 8 lines
Allow autofill to work in the general section of queues.conf.
Additionally, don't try to (re)set options when they have empty values in realtime (all unset columns would have an empty value).
(closes issue #12445)
Reported by: atis
Patches:
12445-autofill.diff uploaded by qwell (license 4)
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@114134 65c4cc65-6c06-0410-ace0-fbb531ad65f3