A new user option, answer_channel, adds the capability to
prevent answering the channel if it hasn't already been
answered yet.
ASTERISK-29440
Change-Id: I26642729d0345f178c7b8045506605c8402de54b
app_confbridge now has the ability to set the estimated bitrate on an
SFU bridge. To use it, set a bridge profile's remb_behavior to "force"
and set remb_estimated_bitrate to a rate in bits per second. The
remb_estimated_bitrate parameter is ignored if remb_behavior is something
other than "force".
Change-Id: Idce6464ff014a37ea3b82944452e56cc4d75ab0a
When in a conference bridge it may be necessary to have
text messages disabled for specific participants or for
all. This change adds a configuration option, "text_messaging",
which can be used to enable or disable this on the
user profile. By default existing behavior is preserved
as it defaults to "yes".
ASTERISK-28841
Change-Id: I30b5d9ae6f4803881d1ed9300590d405e392bc13
ConfBridge has the ability to move between different sample
rates for mixing the conference bridge. Up until now there has
only been the ability to set the conference bridge to mix at
a specific sample rate, or to let it move between sample rates
as necessary. This change adds the ability to configure a
conference bridge with a maximum sample rate so it can move
between sample rates but only up to the configured maximum.
ASTERISK-28658
Change-Id: Idff80896ccfb8a58a816e4ce9ac4ebde785963ee
When a channel already in a conference bridge is attended transfered
to another extension, or when an existing call is attended
transferred into a conference bridge, we now generate ConfbridgeJoin
and ConfbridgeLeave events for the entering and departing channels.
Change-Id: Id7709cfbceb26fbcb828b2d0d2a6b2fbeaf028e1
When producing a combined REMB value the normal behavior
is to have a REMB value which is unique for each sender
based on all of their receivers. This can result in one
sender having low bitrate while all the rest are high.
This change adds "all" variants which produces a bridge
level REMB value instead. All REMB reports are combined
together into a single REMB value that is the same for
each sender.
ASTERISK-28401
Change-Id: I883e6cc26003b497c8180b346111c79a131ba88c
Currently the file sound_only_person is not played when a marked
user (with announce_only_user=yes) joins an empty conference.
This patch fixes it.
ASTERISK-28201 #close
Change-Id: I85b67687e6b220939c3af8091d83a70a7b174cf4
Replace usage of ao2_container_alloc with ao2_container_alloc_hash or
ao2_container_alloc_list. Remove ao2_container_alloc macro.
Change-Id: I0907d78bc66efc775672df37c8faad00f2f6c088
Adding the "label" attribute used for participant info correlation
was previously done in app_confbridge but it wasn't working
correctly because it didn't have knowledge about which video
streams belonged to which channel. Only bridge_softmix has that
data so now it's set when the bridge topology is changed.
ASTERISK-28107
Change-Id: Ieddeca5799d710cad083af3fcc3e677fa2a2a499
Add attribute_warn_unused_result to ast_taskprocessor_push,
ast_taskprocessor_push_local and ast_threadpool_push. This will help
ensure we perform the necessary cleanup upon failure.
Change-Id: I7e4079bd7b21cfe52fb431ea79e41314520c3f6d
The first attempt at publishing confbridge events to participants
involved publishing them at the same time stasis events were
created. This caused issues with bridge and channel locks. The
second attempt involved publishing them when the stasis events
were received by the code that published the confbridge AMI events.
This caused timing issues because, depending on resources available,
the event could be received before channels actually joined the
bridge and would therefore fail to send messages to the participant.
This attempt reverts to the original mechanism with one exception.
The join and leave events are published via bridge join and leave
hooks. This guarantees the states of the channels and bridge and
provides deterministic timing for event publishing.
Change-Id: I2660074f8a30a5224cb953d5e047ee84484a9036
If a conference is ended very quickly after it was created (i.e., the
first user immediately hangs up) then the conference bridge and announcer
channels are not removed.
When a conference is created, the push_announcer() function is added to
the playback queue task processor and the conference object reference is
bumped. If a conference is ended while the push_announcer() function is
still going then the ao2_cleanup(conference) at the end of
push_announcer() will call the destructor function -
destroy_conference_bridge().
The destroy_conference_bridge() function will then add the
hangup_playback() task to the playback queue and will wait for it to end.
Since it is already a current task of the playback queue it will wait
forever.
This patch makes the conference thread call push_announcer() directly.
This way the conference object reference bump is not needed. Since the
playback queue task processor is only used by the conference thread
itself, there is no danger of trying to play announcements before the
announcer is pushed to the bridge.
ASTERISK-27870 #close
Change-Id: I947a50fb121422d90fd1816d643a54d75185a477
With the participant info code in app_confbridge, we were still
in the process of adding the channel to the bridge when trying to send
an in-dialog MESSAGE. This caused 2 threads to grab the channel
blocking flag at the same time. To mitigate this, the participant
info code was moved to confbridge_manager so it runs after all
channel/bridge actions have finished.
Change-Id: I228806ac153074f45e0b35d5236166e92e132abd
ConfBridge can now send events to participants via in-dialog MESSAGEs.
All current Confbridge events are supported, such as ConfbridgeJoin,
ConfbridgeLeave, etc. In addition to those events, a new event
ConfbridgeWelcome has been added that will send a list of all
current participants to a new participant.
For all but the ConfbridgeWelcome event, the JSON message contains
information about the bridge, such as its id and name, and information
about the channel that triggered the event such as channel name,
callerid info, mute status, and the MSID labels for their audio and
video tracks. You can use the labels to correlate callerid and mute
status to specific video elements in a webrtc client.
To control this behavior, the following options have been added to
confbridge.conf:
bridge_profile/enable_events: This must be enabled on any bridge where
events are desired.
user_profile/send_events: This must be set for a user profile to send
events. Different user profiles connected to the same bridge can have
different settings. This allows admins to get events but not normal
users for instance.
user_profile/echo_events: In some cases, you might not want the user
triggering the event to get the event sent back to them. To prevent it,
set this to false.
A change was also made to res_pjsip_sdp_rtp to save the generated msid
to the stream so it can be re-used. This allows participant A's video
stream to appear as the same label to all other participants.
Change-Id: I26420aa9f101f0b2387dc9e2fd10733197f1318e
When an AMI client connects, it cannot determine if a user was talking
prior to a transition in the user speaking state (which would generate
a ConfbridgeTalking event). This patch causes app_confbridge to track the
talking state and make this state available via ConfBridgeList.
ASTERISK-27877 #close
Change-Id: I19b5284f34966c3fda94f5b99a7e40e6b89767c6
This change adds the ability for multiple REMB reports in
bridge_softmix to be combined according to a configured
behavior into a single report. This single report is sent
back to the sender of video, which adjusts the encoding bitrate
to be at or below the bitrate of the report. The available
behaviors are: lowest, highest, and average. Lowest uses the
lowest received bitrate. Highest uses the highest received
bitrate. Average goes through the received bitrates adding
them to the previous average and creates a new average.
Other behaviors can be added in the future and the existing
average one may be adjusted, but this provides the foundation
to do so.
Support for configuring which behavior to use has been
added to app_confbridge.
ASTERISK-27804
Change-Id: I9eafe4e7c1f72d67074a8d6acb26bfcf19322b66
This change adds a configuration option to app_confbridge which can be
used to set the interval at which we will send a combined REMB (remote
estimated maximum bitrate) frame to sources of video. The bridging API
has also been extended slightly to allow setting this so bridge_softmix
can use it.
ASTERISK-27786
Change-Id: I0e49eae60f369c86434414f3cb8278709c793c82
* Made the AMI ConfbridgeList action's ConfbridgeList events output all
the standard channel snapshot headers instead of a few hand-coded channel
snapshot headers. The benefit is that the CallerIDName gets disruptive
characters like CR, LF, Tab, and a few others escaped. However, an empty
CallerIDName is now output as "<unknown>" instead of "<no name>".
ASTERISK-27651
Change-Id: Iaf7d54a9d40194c2db060bc9b4979fab6720d977
This removes references that are no longer needed due to automatic
references created by module dependencies.
In addition this removes most calls to ast_module_check as they were
checking modules which are listed as dependencies.
Change-Id: I332a6e8383d4c72c8e89d988a184ab8320c4872e
The check for last_user == NULL needs to happen before we dereference
the variable, previously it was possible for us to check flags of a NULL
last_user.
Change-Id: I274f737aa8af9d2d53e4a78cdd7ad57561003945
* Stop using ast_module_helper to check if a module is loaded, use
ast_module_check instead (app_confbridge and app_meetme).
* Stop ast_module_helper from listing reload classes when needsreload
was not requested.
ASTERISK-27378
Change-Id: Iaed8c1e4fcbeb242921dbac7929a0fe75ff4b239
This prevents orphaned CBAnn channels from getting stuck in the bridge.
ASTERISK-26994 #close
Reported by: James Terhune
Change-Id: I5e43e832a9507ec3f2c59752cd900b41dab80457
This change does a few things to improve packet loss and renegotiation:
1. On outgoing RTP streams we will now properly reflect out of order
packets and packet loss in the sequence number. This allows the
remote jitterbuffer to better reorder things.
2. Video updates can now be discarded for a period of time
after one has been sent to prevent flooding of clients.
3. For declined and removed streams we will now release any
media session resources associated with them. This was not
previously done and caused an issue where old state was being
used for a new stream.
4. RTP bundling was not actually removing bundled RTP instances
from the parent. This has been resolved by removing based on
the RTP instance itself and not the SSRC.
5. The code did not properly handle explicitly unbundling an
RTP instance from its parent. This now works as expected.
ASTERISK-27143
Change-Id: Ibd91362f0e4990b6129638e712bc8adf0899fd45
This commit fixes two possible scenarios:
* When recording name and if during recording you hangup, file is never
removed. This is due to the fact file location is nulled.
* When recording name and if you hangup during thank-you prompt, file
is never removed.
ASTERISK-27123 #close
Change-Id: I39b7271408b4b54ce880c5111a886aa8f28c2625
A previous commit added plumbing to bridge_softmix to allow for an SFU
experience with Asterisk. This commit adds an option to app_confbridge
that allows for a confbridge to actually make use of the SFU video mode.
SFU mode is implemented in a "set it and forget it" kind of way. That
is, when the bridge is created, if SFU mode is enabled, then the video
mode gets set to SFU and cannot be changed. Future improvements may
allow for a hybrid experience (e.g. forward multiple video streams,
specifically those of the most recent talkers), but for this addition,
no such capability is present.
Change-Id: I87bbcb63dec6dbbb42488f894871b86f112b2020
When user leaves a conference, its channel calls async_play_sound_file()
in order to play the name announcement and then unlinks the sound file.
The async_play_sound_file() function adds a task to conference playback queue,
which then runs playback_common() function in a different thread.
It leads to a race condition when, in some cases, channel thread may unlink
the sound file before playback_common() had a chance to open it.
This patch creates a file deletion task, that is queued after playback.
ASTERISK-27012 #close
Change-Id: I412f7922d412004b80917d4e892546c15bd70dd3
In all non-pbx modules, AST_MODULE_LOAD_FAILURE has been changed
to AST_MODULE_LOAD_DECLINE. This prevents asterisk from exiting
if a module can't be loaded. If the user wishes to retain the
FAILURE behavior for a specific module, they can use the "require"
or "preload-require" keyword in modules.conf.
A new API was added to logger: ast_is_logger_initialized(). This
allows asterisk.c/check_init() to print to the error log once the
logger subsystem is ready instead of just to stdout. If something
does fail before the logger is initialized, we now print to stderr
instead of stdout.
Change-Id: I5f4b50623d9b5a6cb7c5624a8c5c1274c13b2b25
Adds binaural synthesis to bridge_softmix (via convolution using libfftw3).
Binaural synthesis is conducted at 48kHz.
For a conference, only one spatial representation is rendered.
The default rendering is applied for mono-capable channels.
ASTERISK-26292
Change-Id: Iecdb381b6adc17c961049658678f6219adae1ddf
ASTERISK_REGISTER_FILE no longer has any purpose so this commit removes
all traces of it.
Previously exported symbols removed:
* __ast_register_file
* __ast_unregister_file
* ast_complete_source_filename
This also removes the mtx_prof static variable that was declared when
MTX_PROFILE was enabled. This variable was only used in lock.c so it
is now initialized in that file only.
ASTERISK-26480 #close
Change-Id: I1074af07d71f9e159c48ef36631aa432c86f9966
Confbridge announcements tend to block a channel while they are being
played. In some circumstances, this is warranted since you want that
particular channel not to hear the announcement (Example: "John Doe has
entered the conference"). For others it makes less sense.
This change first introduces methods for playing sounds asynchronously
into the conference. This is very similar to how synchronous sounds are
played, except the channel initiating the playback does not wait for the
sound to complete before moving on.
Asynchronous announcements are used for two circumstances:
* Sounds played for a user after they have left the bridge
* Sounds that play first to a single user and then the rest of the
conference (if the channel and conference use the same language)
ASTERISK-26289 #close
Reported by Mark Michelson
Change-Id: Ie486bb3de1646d50894489030326a423e594ab0a
NOTE: This patch was submitted earlier and reverted because of a failing
test. The test has been patched so that it adjusts for the changes here,
so this is being resubmitted for review.
One feature that confbridge has is the ability to play sounds to all
participants in the conference. Prior to this commit, the algorithm for
this was as follows:
* Grab the playback lock
* Push the conference announcer channel into the bridge
* Play back the sound
* Pull the conference announcer channel from the bridge
* Release the playback lock
The issue here is that the act of adding the playback channel to the
bridge and removing it for each announcement is expensive. Amongst the
expenses:
* The announcer channel is imparted into the bridge, meaning a new
thread is spun up for each playback.
* When the announcer is added or removed from the bridge, it results
in the BRIDGEPEER channel variable being set on all channels in the
bridge. This requires keeping the bridge locked and locking each
individual channel in order to set it.
* There's also just the general overhead of adding the channel and
removing it from the bridge. The bridge potentially has to reconfigure
every single time
With this commit, the paradigm for playing back announcements has
shifted.
* The announcer channel is now added to the bridge when the conference
is allocated, and it is hung up when the conference is destroyed.
* A taskprocessor is used to queue playbacks onto the announcer channel.
This keeps the behavior from before where playbacks do not overlap.
* The announcer channel is no longer placed into the bridge as
departable. Since we are not constantly removing the channel from
the bridge, it is safe to add the channel using an independent thread
and simply hang the channel up when it is time for the conference to
be destroyed.
The use of the taskprocessor for playbacks opens up the interesting
possibility of having asynchronous announcements played. In this commit,
however, the behavior is still exactly the same as it previously was.
ASTERISK-26289
Reported by Mark Michelson
Change-Id: Ica9fa4907c2f3728cdd1cf0bc564ef4eb40754a0
One feature that confbridge has is the ability to play sounds to all
participants in the conference. Prior to this commit, the algorithm for
this was as follows:
* Grab the playback lock
* Push the conference announcer channel into the bridge
* Play back the sound
* Pull the conference announcer channel from the bridge
* Release the playback lock
The issue here is that the act of adding the playback channel to the
bridge and removing it for each announcement is expensive. Amongst the
expenses:
* The announcer channel is imparted into the bridge, meaning a new
thread is spun up for each playback.
* When the announcer is added or removed from the bridge, it results
in the BRIDGEPEER channel variable being set on all channels in the
bridge. This requires keeping the bridge locked and locking each
individual channel in order to set it.
* There's also just the general overhead of adding the channel and
removing it from the bridge. The bridge potentially has to reconfigure
every single time
With this commit, the paradigm for playing back announcements has
shifted.
* The announcer channel is now added to the bridge when the conference
is allocated, and it is hung up when the conference is destroyed.
* A taskprocessor is used to queue playbacks onto the announcer channel.
This keeps the behavior from before where playbacks do not overlap.
* The announcer channel is no longer placed into the bridge as
departable. Since we are not constantly removing the channel from
the bridge, it is safe to add the channel using an independent thread
and simply hang the channel up when it is time for the conference to
be destroyed.
The use of the taskprocessor for playbacks opens up the interesting
possibility of having asynchronous announcements played. In this commit,
however, the behavior is still exactly the same as it previously was.
ASTERISK-26289
Reported by Mark Michelson
Change-Id: Ic5cd2c4b98a1eaa1715eb7a5b35d62f1a76d78a5
This patch allows for having app_confbridge register the name of the
conference as an extension into a specific context, similar to
regcontext for chan_sip. This variant is not quite as involved as the
one in chan_sip and doesn't allow for multiple contexts or custom
extensions, you can only specify the context and the conference name
will always be used as the extension to register.
ASTERISK-25989 #close
Change-Id: Icacf94d9f2b5dfd31ef36f6cb702392619a7902f
A user cannot set new bridge options after the conference is created by
the first user. Attempting to do so is documented as undefined behavior.
This patch ensures that the bridge profile options used are from the
conference and not what a subsequent user may have tried to set.
Change-Id: I1b6383eba654679e5739d5a8de98199cf074a266
* Added CONFBRIDGE_INFO(muted,) for querying the muted conference state.
* Added Muted header to AMI ConfbridgeListRooms action response list
events to indicate the muted conference state.
* Added Muted column to CLI "confbridge list" output to indicate the muted
conference state and made the locked column a yes/no value instead of a
locked/unlocked value.
ASTERISK-20987
Reported by: hristo
Change-Id: I4076bd8ea1c23a3afd4f5833e9291b49a0c448b1
This option adds the ability to specify a timeout, in seconds, for a
participant in a ConfBridge. When the user's timeout has been reached,
the user is ejected from the conference with the CONFBRIDGE_RESULT
channel variable set to "TIMEOUT".
The rationale for this change is that there have been times where we
have seen channels get "stuck" in ConfBridge because a network issue
results in a SIP BYE not being received by Asterisk. While these
channels can be hung up manually via CLI/AMI/ARI, adding some sort of
automatic cleanup of the channels is a nice feature to have.
ASTERISK-25549 #close
Reported by Mark Michelson
Change-Id: I2996b6c5e16a3dda27595f8352abad0bda9c2d98
Git does not support the ability to replace a token with a version
string during check-in. While it does have support for replacing a
token on clone, this is somewhat sub-optimal: the token is replaced
with the object hash, which is not particularly easy for human
consumption. What's more, in practice, the source file version was often
not terribly useful. Generally, when triaging bugs, the overall version
of Asterisk is far more useful than an individual SVN version of a file. As a
result, this patch removes Asterisk's support for showing source file
versions.
Specifically, it does the following:
* Rename ASTERISK_FILE_VERSION macro to ASTERISK_REGISTER_FILE, and
remove passing the version in with the macro. Other facilities
than 'core show file version' make use of the file names, such as
setting a debug level only on a specific file. As such, the act of
registering source files with the Asterisk core still has use. The
macro rename now reflects the new macro purpose.
* main/asterisk:
- Refactor the file_version structure to reflect that it no longer
tracks a version field.
- Remove the "core show file version" CLI command. Without the file
version, it is no longer useful.
- Remove the ast_file_version_find function. The file version is no
longer tracked.
- Rename ast_register_file_version/ast_unregister_file_version to
ast_register_file/ast_unregister_file, respectively.
* main/manager: Remove value from the Version key of the ModuleCheck
Action. The actual key itself has not been removed, as doing so would
absolutely constitute a backwards incompatible change. However, since
the file version is no longer tracked, there is no need to attempt to
include it in the Version key.
* UPGRADE: Add notes for:
- Modification to the ModuleCheck AMI Action
- Removal of the "core show file version" CLI command
Change-Id: I6cf0ff280e1668bf4957dc21f32a5ff43444a40e
Attempting to execute DTMF in a confbridge while file playback (prompt,
announcement, etc) is occurring is not allowed. You have to wait until
the sound file has completed before entering DTMF. This patch fixes it
so that app_confbridge now monitors for dtmf key presses during menu
driven file playback. If a key is pressed playback stops and it executes
the matched menu option.
ASTERISK-24864 #close
Reported by: Steve Pitts
Review: https://reviewboard.asterisk.org/r/4510/
........
Merged revisions 433445 from http://svn.asterisk.org/svn/asterisk/branches/11
........
Merged revisions 433446 from http://svn.asterisk.org/svn/asterisk/branches/13
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@433447 65c4cc65-6c06-0410-ace0-fbb531ad65f3
There are three CLI commands to stop and restart Asterisk each.
1) core stop/restart now - Hangup all calls and stop or restart Asterisk.
New channels are prevented while the shutdown request is pending.
2) core stop/restart gracefully - Stop or restart Asterisk when there are
no calls remaining in the system. New channels are prevented while the
shutdown request is pending.
3) core stop/restart when convenient - Stop or restart Asterisk when there
are no calls in the system. New calls are not prevented while the
shutdown request is pending.
ARI has made stopping/restarting Asterisk more problematic. While a
shutdown request is pending it is desirable to continue to process ARI
HTTP requests for current calls. To handle the current calls while a
shutdown request is pending, a new committed to shutdown phase is needed
so ARI applications can deal with the calls until the system is fully
committed to shutdown.
* Added a new shutdown committed phase so ARI applications can deal with
calls until the final committed to shutdown phase is reached.
* Made refuse new HTTP requests when the system has reached the final
system shutdown phase. Starting anything while the system is actively
releasing resources and unloading modules is not a good thing.
* Split the bridging framework shutdown to not cleanup the global bridging
containers when shutting down in a hurry. This is similar to how other
modules prevent crashes on rapid system shutdown.
* Moved ast_begin_shutdown(), ast_cancel_shutdown(), and
ast_shutting_down(). You should not have to include channel.h just to
access these system functions.
ASTERISK-24752 #close
Reported by: Matthew Jordan
Review: https://reviewboard.asterisk.org/r/4399/
........
Merged revisions 431692 from http://svn.asterisk.org/svn/asterisk/branches/13
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@431694 65c4cc65-6c06-0410-ace0-fbb531ad65f3